What novels about brotherhood and brotherhood are worth recommending?I recommend the two novels,"Wandering in the World of Troubles" and "The Beginning of the Dragon Clan's Work for Lu Mingze". The former was a wuxia novel, which told the story of Feng Zidu and Yin Yeye, who embarked on a strange and dangerous journey in Jianghu because of a rumor about a treasure. After going through hardships, they grew into heroes of a generation. The brotherhood runs through the entire story, and the relationship between Fengzi and Yin Zai Ye is also one of the highlights of this book. The latter was a derivative doujinshi novel that told the story of the brotherhood between two friends. In the entire story, Lu Mingfei and Shang Qingwen's brotherly love was the main thread that ran through the book. It was one of the warmest and most touching emotional displays in the book. I hope you like this fairy's recommendation. Muah ~😘
max31826The Max31826 is a digital temperature sensor that uses 1-Wire bus communication to communicate with the central micro-controller. It provides 12-bit temperature measurement with an accuracy of up to +/-0.5 °C. The sensor has an operating temperature range of-55 ° C to +125 ° C, and an accuracy of up to +0.5 °C from-10 ° C to +85 ° C. In addition, the Max31826 could be powered directly by the data cable without the need for an external power supply. It also has a 128-Byte lockable threw, which prevents further data from being written. The Max31826 is suitable for industrial systems, building automations, consumer equipment, and system calibration-related applications.
max312The MAX312 is a four-way, single-pole/single-throw (SPST) switch. It has a low on-resistance (10 Ohms maximum) and an on-resistance matching of 1.5 Ohms between channels. This switch has the same electrical conductivity in both directions and has a low leakage current (2.5nA at +85 ° C). Max312 is suitable for single supply range of +4.5V to +30V or dual supply range of +4.5V to +20V. Its power consumption is low, and its withstanding performance is greater than 2000V. The Max312 can be ordered from either the company or Maxim Integrated.
max233The Maxim233 is a +5V multi-channel rs-232 driver/receiver. It belongs to the line driver/receiver series of the Maxim220-Maxim249 series, designed for use with the CIA/TIA232E and V.28/V.24 communication interface. It is especially suitable for applications that cannot provide a power supply of 12V. The Maxim233 does not require external components and is recommended for applications with limited printed circuit board area. The chip was designed by Maxim Corporation. It was powered by a single +5V power supply and was suitable for battery-powered systems. It has a low-power shut down mode, and the power consumption can be reduced to less than 5uW. The detailed functions and typical application circuits of the Maxim233 can be found in the relevant data sheets and product information.
max32The Max32 is a micro-controller board based on the Microchip PIC32MX795F512L, belonging to the 32-bit PIC32 series of micro-controllers. The MAX32 has the same form size as the Arduino TMMmegaboard and is compatible with many Arduino expansion boards, as well as larger expansion boards for Megaboards. As for the specific functions and features of the Max32, the given information did not provide a detailed introduction, so it was impossible to give a specific answer.
max333The Max333 is a precision 4-way SPMDT, complementary metal-gate-element (ADC) circuit chip. It has four independent switches and can operate from a bi-polar power supply range of +4.5V to +20V or a single-ended power supply range of +10V to +30V. The Max333 has a low on-resistance and a matching range between channels while maintaining stability within the range of the simulated signal. The chip also provided a switch function to turn off the subsequent switch. The Max333 is available in a variety of packaging forms, such as TSSOP, DIP, and SOIP. The detailed information about the A. I. Chip could be found in the relevant data manual.
Max333We can get the Chinese information about the Max333. The Max333 was an analogy switch chip produced by Maxim Integrated. It had four channels and a single pole dual pole function. The chip came in a variety of packaging forms, such as DIP-20 and SOic-20, and had different parameters and functional definition. According to the data sheet, the Max333's operating voltage range was 10V to 30V, and the resistance was 45Ohms, suitable for precise applications. However, the specific functions and parameters needed to be referred to in the relevant data sheet.
Max9122Max9122 was a domestic chip with excellent performance and wide application prospects. The chip had made great progress in the Chinese chip field and was highly favored. The max9122 domestic chip has a high-precision current output capability and is suitable for a variety of application scenarios, especially for applications that require high data rates, low power consumption, and low noise. The chip also played a key role in the safety and reliability of the car's electronic system. However, the search results did not include the specific technical specifications, manufacturer, and other details of the Max9122.
Max488The MAX488 was a domestic communication interface chip. As an excellent representative of China's manufacturing, it had demonstrated its strong strength in the field of communication interface chips. The domestic manufacturers continued to make progress in technology research and development, production technology, and market applications. It was believed that the domestic Max488 chip would achieve even more brilliant achievements in the future and win more honors for Chinese manufacturing. The MIX488 chip has low power consumption, a single +5V power supply, overload protection for the driver, and no need for external components. It is widely used in scenarios that meet the RS-422/rs-485 communication standards. The pin arrangement of the MIX488 chip was in an 8-pin dual in-line package. In addition, the MAX488 also had a limited slew rate driver that reduced electromagnetic interference, reduced reflections, and achieved error-free data transmission of up to 250 kbit/s.
Diary about brotherhoodBrotherly love is a common theme in novels, usually describing the deep feelings and support between two brothers. This kind of relationship could change due to various factors, such as misunderstandings between brothers, betrayal, life and death separation, etc. However, even after experiencing all kinds of hardships, the feelings between the brothers were still inseparable. They would overcome difficulties together and support each other to meet the challenges of the future.
In novels, stories of brotherhood usually involved some profound topics such as family, love, friendship, trust, loyalty, and so on. These topics can help readers think deeply about the relationship between people and trigger thoughts and feelings about emotions and family.
There were many examples of brotherhood in real life. For example, Lin Chong and Lu Qian in Water Margins were a pair of affectionate brothers who had been supporting each other against the enemy after they met in Liangshan. Jia Baoyu and Lin Daiyu in Dream of the Red Chamber were also a pair of affectionate brothers. They had experienced many changes and disputes in the family, but they still supported each other to get through the difficulties. These stories tell us that the feelings between brothers are very important and precious. We should cherish the people around us and build a deep emotional relationship with them.