broken blade light novel

It could be about various things. Maybe it involves a story centered around a broken blade, which could be a magical or significant item in a fictional world. The plot might revolve around the characters' quests related to this blade, like finding its origin, restoring it, or dealing with the power it holds.

I'm not sure as I haven't read the 'broken blade light novel'. But typically in such novels, there could be a young adventurer as the main character who is drawn to the mystery of the broken blade.

There were many forms and reasons for blade damage: 1. ** Wear of the flank **: The friction and wear on the flank caused by mechanical stress. The tool material was too soft, the back angle was too small, the cutting speed was too high, and the feed rate was too small. All of these could cause excessive wear on the flank, which would reduce the size accuracy of the processed surface and increase the friction. 2. ** Boundary wear **: Commonly seen at the contact surface between the main cutting edge and the work piece. Hardening of the surface of the work piece, friction caused by serrated chips, affecting the flow of chips, and other factors can lead to tool collapse. 3. ** Rake face wear (crater wear)**: It is mainly caused by the contact between the chips and the material of the work piece and the spread of the heat. The tool material is too soft, the cutting speed is too high, and the feed is too large. This wear would distort the tool, interfere with chip removal, and reduce the strength of the cutting edge. 4. ** plastic distortion **: It occurs under the high temperature or high stress of the cutting edge. Cutting speed and feed rate were too high, the hard point effect of the work piece material, and the cutting edge temperature was too high due to the tool material being too soft. These were the main reasons that would affect the quality of chip formation and sometimes lead to tool collapse. For cubic boronitride (cbt) tools, which were high in hardness and brittleness, and were made of powder, they were easy to be damaged under intermittent cutting conditions. The damage forms and reasons were as follows: 1. ** Blade Collapse **: This is a common early damage form when the cBN tool continuously or intermittently cuts steel and cast iron. There is a small gap on the cutting edge. The micro-chip can continue to cut within the allowed wear limit. 2. ** Spalling **: When end mill steel and cast iron, shell-like peeling often occurs on the front blade. 3. ** Broken **: Small pieces or large pieces of the cutting edge are broken and cannot be cut normally. It is easy to occur when cutting high-hardness materials continuously or intermittently. 4. ** Cracks **: After a long period of intermittent cutting, there are mechanical fatigue cracks parallel to the cutting edge caused by mechanical shock, and there are also cracks vertical or inclined to the cutting edge caused by thermal shock. After the cracks expand and merge, it will cause the blade to crack or break. In addition, in actual cutting, when the material structure, hardness, and margin of the work piece are not uniform, the front angle is too large, resulting in low cutting edge strength, the process system is not rigid enough to produce vibration, or when intermittent cutting and grinding quality is poor, the cutting edge is prone to micro-collapse. Cutting conditions are extremely harsh, cutting quantity is too large, there is an impact load, there are microcracks in the blade or tool material, residual stress in welding or grinding, and careless operation may cause the blade or tool to break. For brittle materials, such as hard alloy, ceramic, and PC with high TiC content, due to surface structure defects, potential cracks, and residual stress in welding or grinding, the surface is easy to peel off when the cutting process is unstable or the tool surface is subjected to alternating contact stress.

The following is the content related to Broken Iron Blade: 1. [Equipment related] - When equipped with Split Steel Blade/Shattered Steel Blade, you can obtain the Call of Steel, which can be used to obtain the fragments of the steel blade to produce additional effects. - In the early stages of the game, players could first use a two-handed axe after switching from Seven Wounds Break. If there was a Paragon, it could be washed into a one-handed sword critical strike talent. If there was a good two-handed sword, it could be washed into a two-handed sword talent. 2. ** Skills ** - ** Skill Connection ** - Shattered Iron Blade-Evil Throw (Secondary)-Brutal (Secondary)-Increases Critical Hit Damage (Secondary)-Increases Critical Hit Chance (Secondary)-Ferocious (Secondary)(For non-critical hits, you can use Paralysis (Secondary), Penetration (Secondary), and Crimson Refinement (Secondary). In the later stages, you can also consider using Full Health Damage (Secondary)). - Sniper's Mark-Additional Curse on Hit (Secondary)(Sniper's Mark is Level 21, depending on the situation, a manual Curse Mark can be considered for difficult attacks). - Firm, Elegant, Dignity (to be considered later). - Precise-Red Roar (Secondary)-War Flag. - Ancestor's Guardian-Paralysis (Secondary) Wild Rage (Paralysis depends on the overall situation, such as whether the main skill is paralyzed or not, and whether the number of holes is enough). - Leap Strike-Rapid Attack (Secondary): Frost Flash. - Releases (Secondary)-Lava Shield when injured. - Battle Roar of Determination (corresponds to whether to summon troops). 3. ** In terms of mechanism ** - Under the effect of the Vengeance Rush and Snipe Mark, the damage output can be maximized by sticking close to the face. You have to pay attention to the negative effects brought by the speed of the projectile. - [Zero Shot/Long Shot: Shattered Iron Blade points at Zero.] - [Pierce Chance: Skill itself 40%/60%, sublimation 10%, talent 20%, weapon compound physical percentage, etc.] - [Hit Value: Non-critical hit version requires a lot of hit input, and needs to meet the requirements of exquisite skills; critical hit version is suitable, critical hit version has a certain enchantment, so it doesn't need to be hit.] - [Mana Preservation: The Aura of Accuracy can be activated by the amount of blood used by Red clamor. At the same time, due to the inspiration of sublimation, the flag does not need to retain mana. It can also increase the aura effect of Red clamor. 50% of the aura can be used to supplement the survival of firmness and elegance. Later, a certain amount of mana can be used to retain the affixing to open dignity.] - [Mana Consumption: Mana Steal combined with the Mana Consumption reduction on the accessory.] 4. ** Transform and respond to different situations ** - [Change Skills: Change skills to deal with grinding maps and attacks. Normally, there is no need to change skills to fight normal bosses. At the same time, one's talent needs to be adjusted.] - In the early stages, it was recommended to start with Seven Inflicted Injuries and quickly farm, save some equipment and apply the necessary oil before transforming. 5. ** Specialization (reference)** - [Hit Mastery: +500 Hit Value,-2 Mission Value per level (Non-explosive version available)] - [Armor Mastery: If the helmet, breastplate, gloves, and boots all have armor, all resistance increases by 1%.] - [Axe Specialization: Axe or sword type attacks will gain 1 point of [Fury] when hit. This can only be obtained once per second.] - [Sword Specialization: 8% chance of receiving a Fury Ball when hitting a Legendary enemy. Sword type attacks have a 120% increase in critical strike rate. Sword type attacks have a 20% bonus to critical strike damage.] - [Piercing Mastery: Steel Call's reflection damage effect area increases by 40%, Steel Call's casting speed increases by 40%.] - [Life Mastery: If the breastplate does not have a Life Affix, the maximum health will be increased by 15%, and the maximum health will be increased by 50.] - [Physical Mastery: Increases the maximum damage of physical attacks by 10%.] - [Specialization of Retaining: If there is Life and Magic Retained, all elemental resistance increases by 1%.] - [Defense Specialization: Elemental Resistance cannot be reduced by curses (option);[Corrupted Blood] cannot be cast on you (option).] - [Spell Suppression Mastery: Blocking suppressed spell damage +3%(option); Spell Suppression Chance is especially lucky (option).] - [Two-handed Weapon Specialization: Increases damage to rare and legendary monsters by 40%. Increases Defense by 10% for each red slot on the main weapon. Increases Evasion by 10% for each green gem on the main weapon.]

During the Jiajing years of the Ming Dynasty, the Japanese pirates invaded the coastal areas, the Jinyiwei secretly controlled the court, the White Lotus Society rebelled, and various sects also harbored evil intentions. For a time, the Jianghu was turbulent, and the government and the people were shocked. In this misty and misty land of the Ming Dynasty, a little hero with a broken saber set off a wild wave. The little hero was chivalrous and righteous. He exterminated the violent and settled the good. He corrected the real murderer, found the enemy, investigated the suspicious case, and fought against the Japanese pirates. From then on, he became famous all over the world. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

According to the information provided, there was a work that contained 218 chapters, such as the prologue in the first volume of "Descent of the Demon Seed" and the first chapter of "Descent of the Demon Seed". However, there was no more detailed information about the broken sword.

Generally speaking, broken blades could be forged. If the blade was made of metal, such as the steel commonly used in medieval English swords, the forging process included heating the metal to a sufficient temperature before hammering and shaping it. As for the broken sword blade, it could be reheated to a moldable state, and then the shape of the sword blade could be reconstructed by hammering. However, this process might face some challenges. For example, the fusion between the fragments needed to ensure that the material was uniform and that there were no impurities mixed in. Moreover, during the forging process, the temperature and strength needed to be constantly adjusted to ensure the final shape and strength of the blade. Quenching and polishing were equally important. Quenching required a suitable quenching temperature and speed, while polishing could make the surface of the reforged blade smooth, improving rust resistance and durability.