top 1 fighting tutorial

Here are some mooncake shooting guides: 1. ** Shooting with professional equipment ** - ** Equipment preparation **: Canon 6D2 camera, 100mm lens, Shiniu Flash 600 second-generation light, etc. - ** Lighting ** - [Main light: Use a Divine Bull Flash 600 second generation. The accessories are standard covers. Light the background at the two o'clock direction on the back right side. To create a window effect, a window pane can be added in front of the light.] - "Assist light: Use another Shiniu Flash 600 second generation, and choose a long soft light box as the accessory. Light the main mooncake on the front right side. Pay attention to the position of the lamp head not to lean towards the background to avoid affecting the background light effect. - "Light fill: Use a large foam board to fill the light on the left side. If the shooting time is during the day and the fill light effect is not good, you can add natural light to make the light ratio more uniform. - ** Concept of composition **: For example, use the door as the background, place the main body on the table, arrange the props according to the rhythm of height, and use a flat angle to reflect the daily feeling. - ** camera parameters **: Aperture set to 5.6, shutter speed 1/160 seconds, USB 100, main light output 1/8, auxiliary light output 1/32. - [Post-production plan: adjust the white balance, increase the brightness of the shadows, increase the clarity and contrast, sharpen the outline of the props and the main body, and reduce the saturation of the blue primary color to reflect the dark atmosphere.] 2. ** Phone Shooting ** - ** Creating a sense of atmosphere **: Place the mooncake on a white plate, turn on the phone's 2x focal length (to prevent the plate from distorting), use some green plants as the background, and focus on the mooncake on the three-point line under the nine-square grid. - [Increase layering]: Take a book and place it under the plate. Use the top-down angle to center the composition. You can also place some cutlery on the side to form a parallel diagonal line. - ** Framed composition **: Break some mooncakes apart, take a cup, and use the cup handle to form a framed composition. The combination of virtual and real will create a sense of atmosphere. - Other techniques: Find a well-lit window, take two white rags, and pose the mooncake. Use the desk calendar as a prop to magnify it twice and make a diagonal composition. You can take a cup of tea as the background, click the portrait mode, adjust the aperture value to F2, and focus on the mooncake to create a sense of reality. You can also cut the mooncakes and stack them up and down. Find a magazine as the background, place the mooncake in a good position, magnify it three times and place the mooncake on the right three-point line. 3. ** Shooting in different styles ** - ** Simple Shooting ** - [Props: Various colors of cardboard. Melon seeds, walnuts, peanuts, and other common mooncake ingredients or grains may be used.] - ** Light **: Two lights to create a shadowless effect, shooting in the light. - ** Cameras and composition **: Aerial shot (God's perspective), using the golden ratio composition. - ** Chinese Style Shooting ** - Setting up the scene: Find a Chinese window pane and all kinds of old boards to set up the front and back. Find a Chinese vase that is similar to the color of the cheongsam and insert golden osmanthus. When the back is in space, you can hang calligraphy practice paper, pen rack, cast iron pot, etc. on the background cloth. Or use two boxes of mooncakes, a small porcelain plate, oil painting background paper, and a small table as props. You can also use two boards and a few old wooden trays. Add the four treasures of the study and tea set to create a Chinese atmosphere full of books. - ** Light distribution **: It can be used as a single bare light + standard cover, backlit on the right, and filled with light on the front left side. - ** Shooting method **: You can take a test shot, the photographer can take a selfie (such as a 10-second selfie after changing into a cheongsam after the scene is set up), take a close-up of the mooncake, etc. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The following are some of the top ten mobile fighting games: 1. " Dazzling Fight Everyday ": Comic style, simple operation, character design inspired by many well-known anime characters, with unique skills and characteristics. Players can freely choose their characters to train and level up. The controls are easy to master, but winning requires familiarity with skill combos. The game mode included single player challenges, team battles, and arenas. The social functions were powerful. 2. " Time Hunter ": A combination of combat and adventure, beautiful graphics, and unique character design. Players could choose a variety of professions, and each profession had different skill trees and combat styles. The story was rich, and there were various missions and dungeons during the adventure. Combat emphasized cooperation and strategy, and required parties to deal with enemies. The activities and challenges were constantly updated. 3. " Naruto ": Based on a classic anime adaptation, it faithfully recreates the anime scenes and characters, giving a strong sense of immersion. Players could choose to use ninjutsu skills to fight. The combat system was smooth, the skill combo was smooth, there were rich PVP and PVE modes, and there were also story quests to understand the character's story in depth. 4. Dungeon Fighter Online: Origins: Combining fighting and adventure, relying on the classic series, inheriting a rich class system and a variety of skill systems. Players could freely choose their classes to experience different battle styles. The scene was unique, and the battle scene was intense and had a sense of impact. There were also rich dungeons and missions to obtain rare equipment and resources. 5. " Bloody Fighting World ": A 3D action fighting online game with beautiful graphics, cool skill effects, rich class system and character development system, strong combat rhythm, and exciting PVP and PVE gameplay. 6. " King of Fighters Century ": A classic online fighting game. Inheriting the King of Fighters series of gameplay and adding innovative elements, the character library is rich, the skill combinations are diverse, and the competition is strong. 7. " Shadow Fighting Legend ": Dark style action fighting online game. Unique graphics, mysterious atmosphere, smooth action design, challenging levels, and rich character skill growth system. 8. " Battlegod Duel ": A fantasy action fighting online game with a fantasy world as the background. The game world is huge, the characters are beautifully shaped, the skills and special effects are gorgeous, and the competitive gameplay and social system are rich. 9. Ink Pot: A hardcore fighting themed mobile game that combines classical ink painting elements and fighting competition. There are many classic characters of the Journey to the West available for use. There are also swords, swords, and sticks to show off fighting skills. The plot design is interesting and the fighting competition is rich. 10. " Under One Person ": It has the original IP license. The animation style and Eastern martial arts elements are perfectly integrated. The characters are outstanding and have a story background. In addition to fighting competitions, it also supports online interaction. There are rich competitive events and wilderness adventures. Click on the link below to read the original manga of " Under One Man "!

It can be a bit challenging to understand at times. Some of the concepts and plotlines might take a bit of effort to fully grasp.

The online novel tutorial was a series of tutorial and guidance aimed at the creation and reading of online novels. It could help novices better understand and master the creation techniques and reading methods of online novels. Online novels usually included the following content: 1. The writing skills of online novels, such as plot conception, character creation, writing style, etc. 2. The classification and characteristics of online novels such as fantasy, urban, history, science fiction, etc.; 3. The reading methods of online novels, such as reading rhythm, reading skills, reading comprehension, etc. 4. Reading recommendations and recommendation websites for online novels to help readers find their favorite works. In addition, the online novel tutorial might also include some writing experience and techniques to help novices better write and improve their writing skills. If you want to know more about online novels, you can search for relevant websites and books to obtain relevant information.

The following was a basic tutorial for songwriting: First, you had to create a channel dedicated to "recording" songs, then play "accompaniment" and find a suitable accompaniment for the music. After putting on headphones, you clicked on the recording to start singing, and after singing, you clicked on the stop recording. Then, he opened the recording file and listened to it. If he was satisfied, he would change the title of the song to his own. If he was not satisfied, he would record it again. After that, he would enter a song website (such as Baidu Music), choose to publish an original song on the music website, fill in the lyricist, song title, and other information, and click publish. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

Here are some photography tips: 1. ** In terms of exposure ** - ** Shutter **: When the other parameters remain unchanged, the higher the shutter speed, the longer the light entering time, the more exposure, and the brighter the image; otherwise, the darker the image. - ** Aperture **: The smaller the aperture parameters, the greater the amount of light entering, the more exposure, and the darker the image. The larger the aperture, the smaller the depth of field. The smaller the aperture, the greater the depth of field. - ** Iso-sensitivity **: The higher the sensitivity, the lower the shutter speed required to obtain the same exposure effect. When the light is dim, the sensitivity can be increased, but the increase in sensitivity will cause the image quality to be lacking and grainy. When there was sufficient light, the sensitivity was generally around 100, and it was best not to exceed 3200. There was a triangular relationship between the three. The higher the aperture value, the smaller the aperture, the smaller the amount of light entering, and the depth of the field. The higher the shutter value, the slower the shutter, the greater the amount of light entering, and the slower the speed. The higher the IQ value, the greater the amount of light entering, and the lower the quality of the image. 2. ** Setting of exposure mode ** - ** Fully Automatic **: The shutter speed and aperture are automatically calculated by the camera and cannot be changed during shooting. After confirming other elements, press the shutter. - ** Program auto exposure mode (P)**: The camera will automatically calculate the shutter speed and aperture combination. The photographer can modify the parameters. - ** Shutter priority mode (S or TV)**: The camera will keep the shutter speed set and automatically calculate the appropriate aperture size. - ** Aperture priority mode (A or LV)**: The camera will keep the aperture size set unchanged, calculate the appropriate shutter speed, and maintain a large aperture when shooting portraits. - ** Full Manual Gear (M)**: The shutter speed and aperture are set by the photographer. The photographer is required to be familiar with the shutter speed and aperture combination. 3. ** Focus * - [Manual Focus (MV)]: It is suitable for close-range shooting and is a precise focusing method. - ** Automatic Focus ** - ** AF-S (Single autofocus)**: Can be used to pose for portraits, still life, and architectural shots. After half-pressing the shutter to focus successfully, the shutter can be fully pressed. - ** AF-C (Continuous Focus)**: Used for moving objects, capturing people and animals. Half-press the shutter to focus continuously. - ** AF-A (Smart autofocus)**: The camera automatically determines whether it is focused on a single shot or a continuous shot based on the subject, but it is easy to make mistakes and cause out of focus. 4. ** White Balance ** - Correct the color temperature and restore the color of the subject so that the color of the picture is similar to that of the human eye. - He could adjust the overall color atmosphere by controlling the color temperature. If he increased the K value of the color temperature, the photos would be warm, and if he lowered it, the photos would be cold. 5. ** Focus **: The depth of field is related to the focal length. The smaller the focal length, the clearer the background and the greater the depth of field. At the same time, he had to be familiar with the characteristics of different focal lengths such as super wide angle, 24mm, 28mm, 35mm, 50mm, 85mm, 100mm, 135mm, 200mm, 300mm, etc. 6. ** Light Usage **: The outdoor morning and evening light angles are the best, and the light quality is the softest. 7. ** In terms of composition **: The photo usually involves the main body, the accompanying body, the environment, the front, the background, and other elements. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The following is a photography tutorial: ** 1. Exposure-related ** 1. ** Shutter **: When the other parameters are fixed, the higher the shutter speed, the longer the light entering time, the more exposure, and the brighter the picture; otherwise, the shorter the light entering time, the less exposure, and the darker the picture. 2. ** Aperture **: The smaller the aperture parameters, the greater the amount of light entering, the more exposure, and the darker the image. At the same time, the size of the aperture affected the depth of field. The larger the aperture, the smaller the depth of field, and the more blurred the other objects except the subject. The smaller the aperture, the greater the depth of field, and the clearer the other objects. 3. ** Iso-sensitivity **: The higher the sensitivity, the lower the shutter speed needed to obtain the same exposure effect. When the light was dim, the sensitivity could be increased to prevent the shutter speed from being too slow, but the increase in sensitivity would cause the picture quality to be lacking and grainy. When there was sufficient light, the sensitivity was generally set to about 100. In M manual mode, if the aperture and shutter were adjusted and the screen was still dark after the sensitivity was set to 100, the sensitivity could be increased appropriately, but it should not exceed 3200. 4. ** Aperture, Shutter, Iso-triangle relationship ** - The larger the aperture value, the smaller the aperture, the less light entering, and the depth of the field. - The higher the shutter value, the slower the shutter speed, the greater the amount of light entering, and the slower the speed. - The higher the value, the more light would enter, and the quality of the image would decrease. ** 2. Setting the exposure mode ** 1. ** Fully automatic (Auto)**: The shutter speed and aperture are automatically calculated by the camera. The photographer cannot change it during shooting. After confirming other elements, press the shutter. 2. ** Program auto exposure mode (P)**: The camera will automatically calculate the shutter speed and aperture combination. The photographer can modify some of the parameters. 3. ** Shutter priority mode (S or TV)**: The camera will keep the shutter speed set and automatically calculate the appropriate aperture size. 4. ** Aperture priority mode (A or LV)**: The camera will keep the aperture size set unchanged, calculate the appropriate shutter speed, and maintain a large aperture when shooting portraits. 5. ** Full Manual Gear (M)**: The shutter speed and aperture are set by the photographer. It is relatively easy to operate, but the photographer must be familiar with the shutter speed and aperture combination. ** 3. Focus ** 1. [Manual Focus (MV)]: It is suitable for close-up shooting and is an accurate focusing method. 2. ** Automatic Focus ** - ** AF-S (Single autofocus)**: Used for posing portraits, still life, and building shots. After half pressing the shutter and hearing the sound of successful focusing, the shutter can be fully pressed. - ** AF-C (Continuous Focus)**: Used for moving objects, capturing people and animals. When shooting, press the shutter halfway to continue focusing. - ** AF-A (Smart autofocus)**: The camera will automatically determine whether to use single-shot or continuous focus based on the subject, but it is easy to make mistakes and cause out of focus. ** 4. White Balance ** 1. It can correct the color temperature and restore the color of the subject, making the color of the photo close to the human eye. 2. By controlling the color temperature, the overall color atmosphere of the picture could be adjusted. If the K value of the color temperature was increased, the picture would be warm, and if it was lowered, it would be cold. ** 5. Focus ** 1. In terms of depth of field, the smaller the focal length, the clearer the background and the greater the depth of field. 2. There are many focal lengths to choose from, such as super wide angle, 24mm, 28mm, 35mm, 50mm, 85mm, standard zoom lens, 100mm, 135mm, 200mm, 300mm, super long focal length, etc. There were also some practical techniques in portrait photography: 1. ** A light feeling in the autumn leaves **: Standing in a light posture, with both feet together naturally placed on the fallen leaves, both hands gently holding the yellow flowers in front of the chest, looking into the distance with gentle eyes, smiling, head naturally tilted to one side to show the line of the neck. 2. ** Keep fresh and refined in the lush greenery **: Choose a tree-lined background, stand one foot in front of the other and bend your knees slightly, hold a yellow leaf in front of your chest or slightly to the side, naturally shawl your hair, smile, and look back at the camera. The photographer squatted in the grass and focused his eyes on the green grass in the background. 3. [Show your freedom and passion under the maple tree: Stand under the maple tree with your feet shoulder-width apart, lean forward slightly, open your arms or lean your head back to enjoy the sunlight.] 4. ** Capture the beauty of tranquility on the grass by the sea **: Sitting elegantly, legs naturally bent, feet touching the ground or crossed, one hand on the thigh, the other hand tidying up the hair on the temples, the background is the sea island, the sky is clear, the head slightly turns to look into the distance. 5. ** Take a back view with a sense of story **: Stand in the maple forest and face the camera sideways. Your feet are one in front and one behind. Your body is slightly sideways. Your hands are naturally drooping or stroking the leaves or overlapping in front of you. Use the mottled light and shadow of the sun through the leaves to increase the layering and mystery. 6. ** Take a photo on a rock outdoors to feel relaxed **: Choose a flat or slightly inclined rock to sit down. Straighten your legs or bend them slightly. Touch the ground lightly with your feet. Leaning your upper body forward, tilting your head to one shoulder, and closing your eyes to put a fallen leaf beside your face. 7. ** Exhibits delicate emotions through touch **: Standing in the maple forest wearing a white shirt and a beret, touching the maple leaves with both hands, eyes focused and gentle. 8. ** Revealing the beauty of intoxication in the fallen leaves **: Squatting in the fallen leaves, wearing a red sweater and a floral dress, holding ginkgo leaves in both hands, looking into the distance with deep affection in his eyes, his head slightly tilted. 9. ** Charm of contemplation on the maple leaf ground **: Sit on the maple leaf ground, wear a white sweater, brown skirt, and beige beret, with your hands folded on your knees or drooping naturally, looking into the distance or slightly lowering your head in contemplation, and your face should be in a place where there is light. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The following are some easyar-related tutorial: ** 1. Creation of Image Target ** 1. ** Initial Setting ** - import the EasyARSD package, delete the Main Camera, and drag the pre-made EasyAR_Startud and Image Target into the Hierarchy view. - Add the Key obtained from the EasyAR official website to the EasyARbehavior component of EasyAR_Startud. 2. ** Identification Map related operations ** - Then, import the identification map into the streamingassets file, find the target.Json file under the StreamingAssets file, and open it with VS to modify it. The changes included: - Image: The file name of the picture. - Name: The name given to this picture. - Size: The size of the image. A single JSon file was enough for a single project file, because one JSon could define multiple identification maps. It is important to note that the imported images and videos must be placed in Streaming assets, but do not place them in Streaming assets when you start the import. 3. ** Fill in the component information ** - Fill in the information of the EasyImage Target behavior component of TmageTarget (If you download the official website, this component may be troublesome to operate, and some of the optimized SKIDs can be avoided). The specifications are as follows: - Path: The name of the json file (usually the name of the targets, which doesn't need to be changed). - Name: The name defined for the identification map in the JSon file modification. - Size: The size of the image. Please note that you must select "Storage" to read the identification map imported under "Streaming". - Since the initial color of the Image Target was purple, it was necessary to create a material ball, paste the corresponding identification image, and then click Albedo on the Image Target to select the identification image (that is, the image filled in the EasyImage Target behavior component). There might be a situation where the images and videos under the StreamingAssets could not be obtained, so when the file was imported, it was not directly put into StreamingAssets. Instead, the images and videos were put into StreamingAssets after the texture of the material was applied. At this moment, the Image Target was the image he wanted. If you want to make multiple recognition maps, copy the Image Target and then modify the EasyImage Target behavior component information. ** 2. 3D model presentation and video playback ** 1. **3D Model ** - Put the 3D model into the ImageTarget as its child object, and assign the other animations and effects to the 3D Object. 2. ** Video * - Add a 3D Object - >Plane under the Image Target. The size of Plane determines the size of the video. You need to adjust the size of Plane appropriately, and then assign EasyAR - > Script- > videoplayerbehavior to Plane. - Enter Plane's inspector view and type in the information about the videoplayerbehavior: - Path: The name of the video. Try to use mp4 format. - The Video scale Mode was set to full. The next three choices were based on their needs. It should be noted that Storage is also selected as Asees. Video playback had to be ported to mobile. EasyAR currently did not support direct tuning of video playback on PC and Macs. ** 3. Create a license key and project based on Version 4.0 (Take the Android test as an example)** 1. ** Create a license key based on Version 4.0 ** - The link was the same as before, except that EasyAR Sense 4.0 was selected, and this ID had to correspond to the project ID. 2. ** Create Project ** - Create a Unity Android project and import the download link of EasyARSense_4.0.0- final_UnityPluggin_Samples. - Change the project's package name to the package name in the license key. - He clicked EasyAR - > Change UnicenseKey in the navigation bar, changed the UnicenseKey in Inspector, and copied the UnicenseKey created in the first step. - In the Project panel, he chose the following option: 'Samples'/Scenes'/WorldSensing/SpaticalMap_Dense_Ball Game. He added this scene to ScenesInBuild, then packaged it and installed it on his phone. In terms of operation, the operating platform needs to support EasyAR Motion Tracking, ARkit, or ARCore. It is recommended that the computing power of the CPU of the device is not lower than Apple's A10/Snapdragon835/Kiri970 processor. If it can't run, there will be a prompt on the screen. When scanning, if you want to get a better reconstruction result, the developer can prompt the user to move the phone as much as possible to avoid rotating the phone in place; Do not reconstruct in large white and black areas, or objects with reflective light (such as mirrors and smooth metal); Since the reconstruction process relies on the motion tracking system, try to avoid moving the device quickly or blocking the camera. When packaging, if Incompatible graphics API detected! Please uncheck the error warning "Auto Graphics API" (if not done by EasyAR) and rebuild, or EasyAR may not work as expected (e.g. white screen). You can uncheck it after selecting the box next to Auto Graphics API in PlayerSetting- > OtherSetting.

If it was a self-made, DIY-made globe, the tutorial was as follows: The required materials are scissors, glue, and paintbrush. First, print out the game paper. It is recommended to choose a harder paper and then cut the material. There are three size of globe materials in the game paper. You can print and cut them according to your needs (You can follow the "Kuomaru Happy School" public account and reply to "globe" in the dialog box to get the full set of game paper). After cutting, he bent the material slightly and glued the serrated parts according to the order on the game paper to fix and connect the material. After assembling the globe, one could use a paintbrush to paint and draw the locations of various countries on the globe. If you were using an AR globe, you usually needed to download the relevant APP on your phone or tablet, then open the APP and aim the camera at the globe. You could see the corresponding animals, buildings, and so on appear in the corresponding area of the globe. Different brands and types of AR globe might have different functions and operations, but the general process was like this.

If als referred to the pending array (ALS) in Sudoku, there was no tutorial on its usage. If als is Another Looking - glass Server project, here are the related actions: The main boot file for the project is bin/als.sh. The script was responsible for initiating the environment, loading the configuration, and starting the main program. The operation was as follows: 1. First load the configuration file: source conf/configure.yaml; 2. Then start the main program: python Src/main.py. If als refers to ALS-Alice, the installation and usage tutorial is as follows: 1. Open the Cydia icon on the device, switch to the [Update] page, and update all software packages (if any); 2. He switched to the [Software Source] page and clicked [Editor] in the upper right corner. Then, he clicked [Add] in the upper left corner to add the software source address (do not remove it from the list) apt.alsapp.net. 3. He clicked on the software source that he had just added, clicked on the [environmental components] category, and installed the OpenSSH.(If the red text prompts Overwrite during installation, it means that it has already been installed, so you can skip it and not install it). 4. He clicked on the software source that he had just added and installed the ALS-Alice software package. Note: 1. If you have installed other similar software, please uninstall it first. Running it at the same time may cause conflicts. 2. To ensure that the device was connected to the Internet, select the automatic settings for the [Date and Time] option in the <anno data-annotation-id ="233333f-b944 - 4416 - 4416 - 9999 - 9999999999999"> General </anno> option in the <anno> settings of the <anno data-annotation-id ="2222f0a4 - 4367 - 44267 - 99999999999999999"> iPhone </anno>. Time zone: Beijing </anno>. If als meant "as" or "compare", then there was no such thing as using a tutorial. "The Island of Life" is also a wonderful novel. Everyone is welcome to read it!