Simple self-made pop-up book
Here is a simple way to make pop-up books: 1. ** Material preparation ** - Scissors, compasses, rounding machine, glue, pencil, eraser, two pieces of white, one piece of blue A4 cardboard, one piece of white 8K cardboard, and a paper cutter. 2. ** Cut the paper jam (take a specific size as an example)** - The third piece of A4 blue cardboard size cut out: 9 7*6cm, 1 5* 10cm, 1 5* 14cm, 1 15.5*4, 1 15*15, 1 8*7, 1 13*7, 1 17.5*7, 6*7, 1 7*8, 1 13*1. - The fourth piece of 8k white cardboard size cut out: one 32* 16cm (the middle 8cm was marked with a pencil), and one 7*25.5. Mark two points on the top and bottom of the paper 1.5 cm and 11.5 cm horizontally, and mark two points on the left and right of the vertical places 1 cm and 6 cm. Then connect the drawn points to get a 10 cm long and 5 cm wide rectangular shape. He drew a vertical center line in the middle of the rectangular shape and cut it with a knife along the drawn line (only cutting three sides, leaving the short side uncut). After cutting it out, he folded it according to the auxiliary line. After folding the top, he folded the middle line. After folding it, he erased the auxiliary line with an eraser. 3. ** Construct a three-dimensional structure ** - He took out a 5*14 cm white cardboard, marked a dot 0.5 cm to the right of the cardboard and connected them. He used a compass to draw and fold them. After folding it, apply the glue to the folded area and stick the side of the glue to the opening of the blue cardboard (the top edge is aligned, do not wrap the blue cardboard). - After the round corner step (if you have special tools or methods), then apply the glue to the opening on the back of the blue cardboard (the crease and above are covered with glue), and stick the 5*10 cm white cardboard on it. - Place the completed vertical card mechanism on the 32*16 cm page. After determining the position, stick it on (note that the glue should be applied to the blue cardboard). If you can pull it, make a vertical card. 4. ** Follow-up decoration and improvement ** - He could cut out photos and decorate them. He could also add his own bean paste and other elements like when someone made a pop-up book for his best friend.
Self-made mechanism book
The following is an example of the basic steps of a self-made mechanical book: ** 1. Confirm theme and design ** 1. subjects choice - It could be a historical and cultural theme like Silk Road, or an interesting animation theme like Cat and Mouse. - According to the theme of the book, the elements, scenes, and story lines needed to be presented. 2. mechanism design - Consider simple mechanisms such as revolving doors, password locks, and small moving objects. - For example, the revolving door mechanism could be based on the principle of the revolving door structure in the Codex Silenda's "mechanisms" book. It could be constructed using cardboard or thin wood. The mechanism of the combination lock could be designed according to the principle of the password book in his memory, and the components of the lock could be made of cardboard and other materials. - For the mechanism of movable small objects, if it was like the cheese in the cat and mouse theme, it could be cut into the shape of cheese and pasted on the back with nano-soft glue to make it movable. ** 2. Prepare the materials ** 1. paper - Choose thick cardboard or cardboard as the main material of the book to support the structure of the mechanism. If you needed a more realistic cover, you could use a thicker wooden board (such as the sandwich board used to make the Silk Road pop-up book), but it was relatively difficult to process the wooden board. 2. instrument - Scissors were used to cut paper and cards, and the utility knife was used for more delicate cutting, such as cutting the bottom of the shadow of the cup. - Glue or glue sticks were used to stick the parts together, and double-sided tape could also be prepared. - If there was a need to draw a pattern, prepare colored pens, paint, and other drawing tools. ** 3. Creating pages and mechanisms ** 1. Basic Book Page - According to the size of the design, cut out the appropriate size of the cardboard as the book page. - If necessary, he could draw a background pattern or a text description related to the theme on the page first. 2. Mechanical Crafting - Using the revolving door mechanism as an example, according to the designed size and structure, the shape of the revolving door was cut out from cardboard, and the structure that could rotate was constructed by folding, sticking, and so on. Then, it was installed on the page. - For the mechanism of movable small objects, such as the mouse mechanism, the mouse was cut into a suitable shape, and the range of movement required for the small mechanism was retained on the back. The rest of the back release paper was cut off and pasted on the cardboard. - If it was a combination lock mechanism, the various parts of the lock, such as the lock core, lock catch, etc., would be made according to the internal diagram of the designed combination lock, and then assembled and installed on the page. ** 4. Assembling the pages into a book ** 1. He arranged the pages of the mechanisms in order. 2. The pages were bound together by glue or thread, and the spine could be reinforced with thick strips of paper to make the book more secure. 3. To make a cover, one could draw a theme-related pattern or write a book title on the cover. One could also make some simple cover mechanisms, such as a hidden button or flip design, to increase the interest of the book.
How to make a simple pop-up story book?
You can start by choosing a simple story and designing the basic layout. Then, use thick paper or cardstock for durability. Cut and fold the pages to create the pop-up elements. It's not too hard if you take it step by step.
Pupil's self-made game book
Creating a game was a relatively complicated task that required a certain amount of skill and knowledge. For primary school students, self-made games were difficult due to the lack of professional knowledge and operating skills. First of all, in terms of hardware, it was necessary to purchase suitable high-performance processors, graphics cards, memory, and storage devices such as SSDs. Primary school students might have difficulty accurately determining the performance and compatibility of the hardware. In the assembly of hardware, it was necessary to properly install various components, including the power supply and cooling system. This involved circuit knowledge and fine operation. For primary school students, there was a risk of electric shock and damage to the hardware. Moreover, it also required a certain amount of computer knowledge to install operating systems, drivers, patches, and other software. If it was a simple simulation of a self-made game book, one could start by making a model that looked like a game book by hand. For example, using a cardboard box to make the shell of the game book, and then drawing or sticking patterns representing different hardware or functions on it to represent the structure of the game book. However, this was very different from making a game book that could be used. The novel " The Lost Seventeen " is equally exciting. Everyone is welcome to read it!
How to make a self-made school novel with pictures? It's good and simple
Here are some simple ways to make your self-made school novel look good: ** 1. Story content ** 1. ** Create an interesting character ** - Creating characters with distinct personalities, such as creating a confused but kind female protagonist, or a smart but somewhat arrogant male protagonist. He could get inspiration from common school characters, such as the sporty sunny boy and the quiet girl who was artistic. These characters could easily resonate with readers because they might have similar characters in their real school life. 2. ** Construct a simple plot ** - The plot was built on the basis of common scenes in school life, such as exams, sports games, cultural performances, etc. For example, a story about a student with poor academic performance who trained hard to prove himself at a sports meet, or a series of interesting stories about a group of students preparing for a school performance. The plot didn't need to be too complicated. A simple and clear storyline would make it easier for the readers to understand and immerse themselves in it. - Add some light humor or warm and touching elements, such as pranks between classmates, mutual encouragement between friends, etc. ** 2. Painting ** 1. ** Painting style simplified ** - He would use a simple style, such as stick figures or cartoonish prints. The simple strokes were simple and easy to use. It did not require high painting skills to draw characters and scenes. The Q-print style was very cute and suitable for expressing the youth and vitality of the campus. For example, draw a girl with a ponytail and a backpack, or a boy running on the playground in sportswear. 2. ** Bright colors ** - Choosing bright and lively colors could reflect the vitality of campus life. For example, use bright blue to paint the sky, use green to paint the campus lawn, use bright red to paint a girl's bow or a boy's sports vest, and so on. However, he had to pay attention to the coordination of the colors and avoid too dazzling color combinations. 3. ** Focus on drawing scenes ** - There was no need to draw overly complicated scenes and highlight key elements. For example, when drawing the classroom scene, he could focus on drawing the blackboard, tables, chairs, and a few main characters. When drawing the playground scene, draw the main elements such as the running track, the basketball hoop, and the students who are exercising. ** 3. Typography ** 1. ** The picture and text match reasonably ** - Make sure that there is a good coordination between the picture and the text. The picture can directly explain the content of the text. For example, next to the text describing the nervousness of the protagonist participating in the speech competition, the protagonist's forehead was sweating and his hands were tightly holding the speech. 2. ** Leave an appropriate space ** - Don't let the page be too crowded. An appropriate amount of white space can let the reader's eyes rest, and it can also make the entire page look cleaner and more comfortable. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to find the material for a self-media article with a simple book?
Jian Shu was a content creation and sharing platform where users could post articles, write, share, comment, and so on. If you want to find the material for self-media article writing in the book, you can follow the following steps: 1. Search keywords: Enter keywords related to self-media article writing such as "self-media writing","material","writing skills", etc. There were many related articles and topics in the book. One could read and analyze these articles carefully to obtain inspiration and material. 2 Follow them to get their latest updates and articles. Paying attention to the author would also allow him to obtain more Jian Shu coins and benefits, which would be of great help to writing and promoting his own articles. There are many hot topics and discussion forums in the book. These topics and discussion forums can provide you with a lot of writing materials and inspiration. For example, in the short book topic " self-media writing," there were many articles about self-media writing skills, writing experiences, and successful cases that could be read and learned. 4. Jian Shu recommendations: Jian Shu recommendations are excellent articles and authors recommended by the Jian Shu platform according to the reading and writing behavior of users. You can read and pay attention to the articles and authors recommended by Jian Shu for inspiration and material. 5. Search: Search is a search function provided by Jianshu. You can enter keywords in the search box to find relevant articles and materials. In order to write a better article, one needed to read and analyze carefully to obtain inspiration and material from many aspects.
How to make a self-made novel e-book
If you want to make your own novel e-book, you can use the following methods: 1. ** Using Yunzhan Network (suitable for creating e-books based on PDF-files)** - ** How to access Yunzhan website through mobile phone browser **: click "upload now", follow the prompt to register and log in (you can get cloud storage space after registering and logging in), and then select the document to be converted. - ** Mobile application method **: Search for the "Yunzhan Net" app in the mobile application store and download it. Open the software interface and click "My" to register and log in (mobile phone registration is supported, and existing accounts can be directly logged in). After logging in, select the PDF-file that you want to convert into an e-book and automatically convert it. It should be noted that the platform will review the content of the uploaded PDF-files. After the free version users have passed the review, they will be able to obtain the link and QR code of the book for sharing. Similar operations could be done on the computer, and it could also set the title, description, keywords, table of contents, bookmark, etc. of the e-book. It also supported encryption of the e-book and adding video, audio, links, and other elements to the page. 2. ** Using the e-book creation generator (suitable for creating a JAR e-book from a TXT document)**: You can create a JAR e-book from a commonly used TXT document. The e-book text can be automatically cut during creation. You can also create a CHM e-book and an EXE e-book with password encryption. 3. ** With the help of the phone function (for converting paper novels to electronic versions)** - ** Wechat's "extract text" function **: If the novel is printed and the content is in text form, you can use Wechat's extract text function to convert it (but this method may require subsequent editing and sorting into e-book format). - ** Memo "document scanning" function **: Some mobile phones have a document scanning function, which can be used to scan paper books into e-books (it may also need to be further organized into a suitable e-book format). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to have a custom-made pop-up story book?
To have a custom-made pop-up story book, you could either find a local workshop that offers such services or search on specialized websites. Provide them with detailed instructions about the story, the style you prefer, and any specific features you want. They'll take it from there and craft a personalized pop-up book just for you.
Self-made Tomb Robber novel recommended book list
Here are some recommended tomb-robbing novels: 1. " Tomb Raider Talks ": This novel tells the story of a mysterious tomb adventure. 2. [Tomb Raider]: It described the most realistic and exciting tomb raiding experience of a group of men in real life. 3. Grave Robbing Concubine: The Emperor, Gently Flirting: Grave Robbing Elements in Ancient Romance and Classic Aerial Stories. 4. [Grave Robber's Chronicles: The work of the Third Uncle of the Southern Sect. It tells the story of a group of experienced grave robbers searching for treasures.] 5. [Ghost Blows Out the Light]: This is the work of the world overlord. It uncovers the story of ancient civilizations, lost treasures, and mysterious ancient tombs. These books covered different styles and topics of grave robbing novels to meet the different preferences and needs of readers.
A simple shed made of bamboo
Bamboo could be used to build simple tents. According to the information provided, bamboo was widely used in the construction field. It was light, strong, and flexible. Bamboo could be used to build the basic structure of the shed, such as skeletons and frames. The method of building a bamboo shed included choosing suitable bamboo, cutting the bamboo into different lengths, and using binding and weaving techniques to connect the bamboo together. In addition, other natural materials could be used to strengthen the stability and durability of the shed. However, the specific construction method and steps needed to be adjusted according to the actual situation and needs.
Self-made Punch
He could make a simple punching machine. First, prepare a piece of cardboard, cut it into a rectangular shape and fold it in half. Then, he used an awl to pierce through the folded cardboard and expand the edge to the size of a straw. Next, he cut out a section of the straw. One end was cut into a pointed end, and the other end was cut into four pieces and folded outward. In this way, a simple punching machine was made. This kind of self-made punching machine was cheap and convenient to carry around. It could be used anytime and anywhere.