How to use the cleaning robot

Answer 1

The following are the steps to use the cleaning robot:
1. ** Preparing Work **
- Make sure that the cleaning robot is placed in the area that needs to be cleaned and remove obstacles that may hinder its operation, such as debris, cigarette butts, matches, and other flammable and explosive items on the ground.
- If you choose a sweeping robot with an automatic watering function, you must reserve the size of the water supply and drainage in advance.
- To avoid using it in a humid environment to prevent the motor from being wet and causing a short circuit and fire; to place the cleaning robot in a flat position to avoid damage to the machine and to facilitate cleaning.
2. ** Charging **
- When it was used for the first time or when the battery was low, connect the charging stand to an appropriate socket, and then aim the robot at the charging stand to ensure that the metal contact was good.
3. ** Activate robot **
- Press the switch button to start. When the start was successful, there would usually be a voice prompt or an indicator light.
4. ** Setting Mode **
- Set the automatic, edge, and depth modes according to the requirements.
5. ** Cleaning process monitoring **
- After starting the cleaning process, you can monitor the entire process through the mobile APP or remote control so that you can understand the progress in real time and make necessary adjustments. For example, you can check the speed of the sweeping robot, the completeness of the map, the cleaning trajectory, etc. You can also check the photos taken by the sweeping robot when it encounters obstacles, and the marked information.
- Building a map was an important part of using the sweeping robot. Before building a map, one had to clean up the debris on the ground. It was recommended to set areas such as the table leg forest that could easily cause the robot to get stuck as a restricted area. The speed and completeness of the map creation were related to the navigation planning ability of the robot. The speed of the map creation of different brands and models of cleaning robots varied.
6. ** Protect against collisions and falls **
- After placing the furniture in the room, remove any items that may cause danger, and close the doors and windows to limit their range of movement to prevent accidents such as hitting the wall or falling down the stairs.
7. ** Safety maintenance **
- Clean up the accumulated dust and sundries in the roller brush and storage box regularly; check whether the filter is blocked. If it is blocked, it needs to be cleaned in time, but be careful not to wash the sea handkerchief (used to filter the air to prevent the dust sucked in from blowing out again). If the sea handkerchief is dirty, it needs to be replaced in time. Change the filter element regularly to maintain the suction force; Pay attention to the wear and tear of the tires. If there is any wear, replace it in time.
8. ** Automatic recharge **
- When the mission is completed or the remaining battery is lower than the set value, the smart sweeper will automatically return to the base station to replenish itself.

In addition, when purchasing a sweeping robot, you can consider choosing a sweeping and dragging system with a more intelligent navigation method.(For example, LIDS-based laser radar navigation, visual navigation + laser navigation), products with base station self-cleaning function, anti-entangling hair rolling brush, automatic lifting of side brush, automatic loading and unloading of mop, AI intelligent fusion obstacle avoidance, base station with 60-degree hot water mop washing and hot air drying, large dust bag capacity and automatic addition of cleaning liquid. These functions help to improve the experience of the cleaning robot.

"A Short History of the Future: Legends of the Intelligent Era" was equally exciting. Everyone was welcome to click and read it!