The Goddess 'fill light
The reference materials mentioned some fill light that could be used to shoot the goddess, such as the LED lights of Nex, including the HC1000SSS, pocket photography lights TC168, TC120A, and so on. In addition, he also mentioned a 10-inch hair lamp used for shooting in the live broadcast room. The price was 40.75 - 90.82 yuan, and the light source power was below 10W. There were many specifications such as white, warm, and tri-color dimming. The type was LED fill light, which was convenient and used on the desktop. When shooting the goddess, the use of the fill light was crucial. For example, when shooting indoors, the headlights could be used as backlights, and the pocket camera light could be used to fill the light in front. " Shen Mingri " is equally exciting. Everyone is welcome to click and read it!
Goddess Maiden 'fill light
There were many ways to use the fill light when shooting a female deity. In terms of the number of lights, prepare at least two fill light. These fill light could be LED lights, photography lights, night lights, table lamps, etc., as long as the power was high enough. In terms of the position and function of the light, one was placed behind the back to illuminate the hair, making the hair appear golden; the other was placed in front to fill the light on the face, otherwise, when the light was not good, the face would easily appear yellow and black, affecting the image effect. For example, when using LED lights from Ness in some shooting, such as a HC1000SSS and a Ness pocket camera light TC168, the power of the headlights was turned to 50% when used as backlighting, and the power of the pocket light was fully turned on. This way, the brightness of the light was better than that of the appropriate picture. The color temperature of these two lights could be adjusted. Here, the white color temperature was used, and the warm color temperature could also be used according to preference. Under the same power, the light ratio of the backlight and the front fill light was between 100:70 - 80. There was also a soft light for hair, which was easy to install and operate. It could be adjusted at multiple angles. It had remote control and could produce the effect of a female deity's light. It was also a light filling divine artifact with three colors, cold and warm. It could also be used for live broadcast light filling, product optimization, and many other purposes. " Shen Mingri " is equally exciting. Everyone is welcome to click and read it!
How to fill in the light in the studio?
Filming in the studio needed to start from the following aspects: 1. ** Equipment Selection ** - ** Lighting Equipment **: - Choose a flash or studio light according to different needs. For example, if you want to shoot a beautiful and fashionable portrait, you need to start from the experience of a senior photographer choosing light equipment and rationally choose the flash or studio light that suits you. - Zhiyun's 5x F100 light stick was also an option. It had 1,000,000 W of power. It could offset the dullness of the face caused by natural backlighting during daytime portrait shooting, and it could brighten up parts and body contours at night. It also came with 30W high-power LED effects. 148 LED lamps could create a variety of lighting effects to meet the needs of creative light painting. It could also be used for still life photography, commercial advertising shooting, etc., to deepen the audience's impression through different colors and angles. In the live scene, with the light control accessories, a variety of lighting effects could be built in a small space. - ** Reflecting Plate **: - Multi-functional reflective panels were more practical, such as the common five-in-one reflective panels. Different sides had different functions. The silver side reflected light and was white, suitable for making up for shadows when the sun was strong; the golden side reflected light and was a warm color, suitable for subjects that needed warm skin; the white side reflected light weakly but gently, which was good for showing skin details; the black side was a light absorbing plate, which could be placed next to a human face to absorb light when a three-dimensional feeling was needed. - The white foam board (rice pineapple) had a good reflective effect and was soft, but it was inconvenient to carry around. 2. ** Cameras and lighting coordination **: - Pay attention to the camera mode selection and the settings of the camera's white balance. 3. ** Light position setting and effect **: - You need to master different light position settings and effects, such as Rembrandt light, ring light, butterfly light, apple light, and other light position settings. - The lighting technique of the studio under different color backgrounds was also crucial. It was necessary to be able to easily handle the hook light, hair light, and eye light, and simulate the natural light effect indoors. 4. ** Light Type **: - ** Light ratio adjustment **: Control the light contrast of the screen so that the shadows are not too dark and the details are not lost. For example, when the main light was hard, it was easy to form deep shadows. At this time, the supplementary light could prevent the shadows from being too deep. It could also be used to remove small shadows such as eye bags, wrinkles, orbicularis orbicularis, but it did not change the soft and hard nature of the light. - ** Adjusting transition **: Make the transition of light more gentle. It is suitable for portraits with clear light and shadow. 5. ** Software Support **: - You can use 3D simulation studio lighting software such as Set A Light 3D Studio on both Windows and macs to help photographers efficiently and intuitively simulate and control light to create rich lighting effects. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Slum fill light recommendation
If the budget was low, they could consider the Zhiyun Cm25, which was priced at 199 yuan. It was a 25W fill light with an adjusted color temperature. It had a built-in battery and could be charged while using it. The Inhee gas column lamp was also priced at 199 yuan. It was a 12W stick lamp with an adjusted color temperature and a built-in battery. There was also the full-color fill light produced by Slow Door. It was similar in size to a smartphone. It was relatively thin and had a matte texture. It was portable and had many functions. It had a charging port, a switch, a mode switch, a color temperature adjustment button, brightness adjustment, intensity adjustment, and many other functions. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The streamer made a video of fill light
The following is the general framework of a video about making a streamer's fill light: ** 1. Beginning of the video ** 1. ** Introduction of theme ** - It started with a short video of the streamer broadcasting in a poor lighting environment, showing the poor image of the streamer and the unclear image caused by insufficient fill light, and the importance of the streamer's fill light. - This video will show you how to make a streamer's fill light. ** 2. Materials and tools preparation section (the images can show the materials and tools one by one)** 1. ** Materials ** - Lighting components: If you use LED lamp beads, you should introduce the basis for their selection, such as high brightness, an adaptable color temperature range (for example, an LED lamp bead that can be adjusted between 3000 - 8000K to meet the needs of different scenes), and a high color rendering index (such as a color rendering index of 90 or above to better restore the true color). - [Heat dissipation material: It can be a metal heat sink. Explain the significance of heat dissipation for the long-term stable operation of the fill light, especially in a live broadcast where the fill light may be used for a long time.] - Power supply components: choose the appropriate power charger, consider whether the voltage, current and other parameters can meet the power requirements of the LED lamp bead, such as the power of the lamp bead needs to match the corresponding output power. - "Shell material: It can be plastic or metal. The plastic shell is light and cheap, while the metal shell has good heat dissipation and is strong. It can be chosen according to the needs. 2. ** Tools ** - Screwdriver: Used to disassemble and install screws, and assemble various parts of the fill light. - Electric Soldering Iron: If you need to solder the circuit, it is used to connect wires and electronic components, such as welding LED beads to the circuit board. - Multimeter: During the circuit assembly process, it can be used to check whether the circuit is connected, test the voltage and current, and other parameters to ensure that the circuit is working normally. ** 3. The production process (detailed steps will be displayed in conjunction with the operation of the screen)** 1. ** Circuit Assembly ** - The LED lamp beads were fixed on the circuit board according to the designed circuit layout. If there were multiple lamp beads, pay attention to the arrangement to ensure uniform illumination. For fill light that could adjust the color temperature, it might be necessary to install different color temperature lamp bead groups. - Use an electric iron to connect the wires to ensure that the welding is firm and there is no false welding. Pay attention to safety during the welding process to avoid burns and electric shocks. - Connecting the power supply circuit to the LED lamp bead circuit, before connecting, check whether the positive and negative poles of the power supply match the lamp bead circuit to prevent a short circuit. 2. ** Heat sink installation ** - If a metal heat sink is used, the heat sink can be closely attached to the heat dissipation part of the LED lamp bead, and thermal grease can be used to improve the thermal efficiency. - For some fill light with a cooling fan, install the cooling fan in a suitable position to ensure that the fan can effectively take away heat when running, and at the same time connect the power circuit of the fan. 3. ** Shell Assembly ** - Place the assembled circuit and heat sink into the shell. Pay attention to the layout of the internal circuit to prevent the circuit from being squeezed or damaged. - Use a screw driver to install the screw of the shell to ensure that the shell is well sealed. At the same time, reserve the position of the power interface, adjustment button, and other components. 4. ** Function Test ** - After the assembly was completed, do not completely seal the shell first. Use a Multimeter to check the circuit again to ensure that there was no short circuit or open circuit. - He connected the power supply and tested whether the fill light could be lit normally, and whether the functions such as adjusting the color temperature and brightness were working normally. If there was a problem, check the fault point in time, such as checking the welding point, circuit connection, and whether the components were damaged. ** 4. Finished product display and summary ** 1. ** Finished product display ** - Demonstrate the effect of the prepared streamer's fill light in different scenarios. For example, in a dark room, place the fill light in front of the streamer, to the side, and other different positions to show the effect of improving the streamer's facial lighting and the overall live broadcast screen. - Demonstrate the adjustment function of the fill light, such as the adjustment process of the color temperature from warm to cold, and the change effect of the brightness from low to high. 2. ** Summing Up ** - He reviewed the key steps and precautions in the production process, such as the key points of circuit assembly and the importance of heat dissipation. - It emphasized the advantages of self-made streamer fill light, such as low cost and the ability to customize functions according to their own needs. At the same time, it could also mention some possible shortcomings, such as the gap between professional fill light in terms of craftsmanship and stability. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The fill light used by dance anchors
Dance streamers needed to use multiple different types of fill light. Because the dance needed to show the effect of the scene lighting, it needed to use different types of lights to simulate different scene lighting, such as white, yellow, and purple. In order to prevent the dance anchor from being affected by shadows and darkness when dancing, it was necessary to use some brighter lights around the stage to increase the overall brightness. In order to make the skin color of the dance host more natural when dancing, it was necessary to use some lights with suitable color temperature and brightness. If conditions permitted, they could use smart fill light that could adjust the brightness and color of the lights to adjust the lighting effects in different scenes to achieve a more realistic effect. Dance anchors also needed soft lights and ring fill light. The soft light could provide soft light, making the dancer's skin color more natural and reducing shadows when shooting a dance video. The ring fill light could provide uniform light, allowing the dancer to be illuminated as a whole and enhancing the video effect. In addition, dance anchors also needed to choose different lighting equipment according to the actual situation, such as photography lights, hand-held lights, etc., to meet different shooting needs. In the market, there are a variety of lighting products that can be used for dance streamers, such as live fill light Different types of lighting equipment were available for selection, such as LED portable light (dedicated soft light for shooting live broadcast rooms), RGB sound-collecting atmosphere light (live broadcast background fill light dance music voice-controlled rhythm light), RMB atmosphere floor lamp (bar e-sports decorative light, bedroom mood light, live broadcast dance background fill light), shadowless lamp (live broadcast room 260W high-definition dance studio shooting live broadcast super bright shadowless lamp, clothing floodlight ceiling lamp), etc. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light on a cloudy day
The following methods could be used to fill in the light on cloudy days: 1. ** Using a reflective board to fill in the light **: - Reflectors had different sides, and the choice had to be made according to the needs. The silver surface reflected strong light and reflected white light, which was suitable for filling shadows when the sun was strong. The golden surface reflected high light and reflected warm light, which was suitable for subjects that needed the skin of the characters to be warm. The white surface reflected weak light but was soft, which was good for showing the details of the skin. The black surface was a light absorbing plate, which could absorb some light when placed next to the face to create a three-dimensional feeling. The soft light screen could filter light when the light was hard to make the skin look more delicate. - Even if there is no shadow on the face of the character, but the eyes are dull and lack light, you can also use the reflective board to fill in the light. 2. ** Using the surrounding environment to fill up the light **: - Light-colored roads, reflective water, white walls, etc. Even the photographer's light-colored clothes could have a certain effect when shooting at close range. 3. ** Use light to fill in the light **: - The red headlights could simulate sunlight and could save the situation of insufficient light on cloudy days. - Ordinary flashlights could be used to illuminate a part of the face to make it easier to fill in the light. - There were many types of imaging flashlights that could be used to create different light and shadow effects. When lighting, one had to pay attention to avoid interfering with other light and shadow. It was better to light the face from the side. - 100W built-in battery, dual color temperature (2700K-6500K color temperature adjustment and Max brightness mode) fill light, built-in 18000mAh battery, can be placed behind the character to create a sunset atmosphere. This fill light can be used in interior, exterior, and night scenes. 4. ** Using the items in the model's hands to fill in the light **: - If the model has a small white fan or other white items in her hand, she can use it to fill in the light on her face to brighten her skin. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light for outdoor photography
The following methods can be used for outdoor photography: ** 1. Choose a suitable shooting time ** From 9 to 10 in the morning and from 3 to 5 in the afternoon, the light was soft and warm, and the angle of illumination was low. It was the ideal time for outdoor portraits. ** 2. Use the natural environment to fill in the light ** 1. ** Close to the light source ** - In an open environment with insufficient light (such as cloudy or dimly lit places), if there is a window nearby and there is light in the room, the subject can be close to the window and use the indoor light to fill in the light. If it is in some places with street lamps and other light sources, the subject can also be close to the street lamps and other light sources. 2. ** Looking for reflections ** - Using white building walls, beaches, and other natural reflections to reflect light onto the subject. For example, when shooting near a white building, the light reflected by the white wall could illuminate the shadow of the character. ** 3. Refill the light with the help of the light filling tool ** 1. ** Reflecting Plate Replenish Light ** - Reflective panels had different surfaces such as silver, gold, white, and black (light absorbing panels). The silver surface had a strong reflection, which was suitable for filling up the light when the sun was strong; the gold surface had a high reflection rate and reflected warm light, which was suitable for shooting that needed warm skin; the white surface had a weak but soft reflection, which could make the skin of the character delicate. - When using it, the reflective board should face the light source and adjust the angle so that the reflected light hits the face or body part of the character that needs light. For example, when there was a shadow on the face of a character, the reflective board was adjusted to a suitable angle to allow the reflected light to eliminate the shadow. 2. ** fill light Fill-up Light ** - The LED photography fill light and light stick were external light sources that were constantly bright. They were easy to carry and could adjust the parameters and color temperature. When in use, the direction, angle, brightness, and color temperature of the light can be adjusted according to the needs. For example, the Zhiyun Power King G60 had a power of 60W, small size (the size of a Rubik's cube), light weight (300g), high compatibility, and could supply power in many ways and dissipate heat well. The Luming W100R had a power of 100W, weighed more than 300g, and had a large light-emitting area of 31mm. It had a built-in reflective cover, and the color temperature was adjusted from 2700K to 6500K. It had a flexible power supply method and good heat dissipation effect. It could be used with soft light boxes, soft light covers, and other accessories to improve the shooting effect. - When the flash was used to fill the light, there were two ways to flash it: from the top of the camera or from the camera. The off-camera flash was preferred. It was necessary to avoid directly aiming at the face. A soft light cover could be installed or the angle of the light could be adjusted to prevent the face from being too bright and the light from being too hard. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
fill light recommended outdoor locations
Here are some recommendations for outdoor photography: - Tucuang's 100W fill light: This is a new product with 100W power and a built-in 18000 mAh battery. It can last up to 60 minutes at full power. Its exterior is a retro calfskin body with the same color fish scale logo. - Hobolite fill light: This is a fill light with a point light source. The brightness is high and strong. With the soft light cover attachment, the light can become softer. It was flexible and had a complete set of accessories. There were also four loose-leaf light shields, which made it easy to shape the light. Not only could it be used for video recording, but it could also be used to fill in the light or make up the outline light when taking photos. - Although the price was expensive, it had many professional features. The light source was the Bria light source engine developed by Artus. It had five types of light beads that mixed together to produce a white light similar to the sun. The color temperature range was 2500K-10000K, and the brightness of each color temperature fluctuated slightly. There were two simulated daylight modes, CIE daylight and blackbody daylight, which could give professional users more creative freedom. In addition, the workmanship was good and the waterproof function was strong. It was suitable for the crew to shoot rain scenes and other outdoor shooting needs. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light evenly in photography
Here are some ways to achieve uniform fill light in photography: - Use the soft light screen: The soft light screen can filter the light when the light is very hard, so that the light becomes soft, which helps to make the light evenly distributed. For example, when shooting a portrait, the light received by the skin of the character can be more uniform, and the skin condition can be presented delicately. - Choose the right reflective board: The white side of the reflective board is weaker and softer. This soft reflective characteristic is conducive to making the fill light more uniform, making the light on the surface of the character or object look more natural and uniform. - Multi-light source fill light: use multiple light sources to fill light from different angles, adjust the brightness, angle, distance, and other parameters of each light source, so that the light can complement and fuse with each other, avoiding obvious shadows and highlight areas, thus achieving a uniform fill light effect. For example, when shooting badges, while using side backlighting to outline the outline, the front or side light was used to eliminate the overly strong shadows. Through the cooperation of this multi-directional light source, the effect of uniform light was achieved. - Whether it was a flash, a continuous light, or a soft light, the right angle and distance were crucial. For example, keep the flash or other light source at an appropriate distance from the subject and adjust it to a suitable angle to avoid the light being too concentrated in a certain area. This would allow the light to cover the subject more evenly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How much is fill light the studio?
The wattage of the photo fill light in the studio depended on many factors. If it was a small-scale application scene such as indoor breeding of Setida, a 30 - 40 Watt fill light could meet the demand, but for studio photography, the power usually needed to be higher. For example, there was a 200-Watt Neuer CCB200C photography fill light. Its color temperature could be adjusted from 2500K to 7500K, and its color rendering index was 97+ TLCl98 +. It was suitable for improving the texture and atmosphere of the picture and could be used for studio photography. There was also the Picture Cube SK -2000L permanent LED photography fill light with a maximum output power of 200W, a standard color temperature of 5600, a luminous flux of 18000lm, and a display index of 90. It was suitable for children's photography, portrait photography, wedding photography photography, and other photography creations in the studio. There was also a 100-Watt fill light that could be used for studio photography, such as a fill light that could last for 60 minutes at full power and could adjust the color temperature. Therefore, for the studio photo fill light, about 100 - 200 W was more suitable, but the specifics also needed to be determined according to the actual shooting needs, the size of the studio, and other factors. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>