The planting techniques of the clumped hackberry were as follows: * * 1. In terms of fighting ** 1. * * Miao Yuan chooses ** - It was best to start cultivating from the young seedlings. The survival rate of such a group planting was higher, but the young seedlings needed a long time to be cultivated. Generally, it would take more than ten years to grow into shape. - When choosing a single-stem seedling to be planted together, one had to choose a tree that was similar in shape and height, as natural and harmonious as a brother and sister. 2. * * Combined Operation ** - When the tree-digger dug the soil ball, he had to plan the planting plan and determine the location of each tree. Cutting the soil balls should be done according to the position of the combination, reducing the root section so that the tree could be tightly attached. After cutting, apply healing agent to the root wound to promote healing. - The planting soil should be able to drain and breathe well and have a good ability to retain water and fertilizer. There should not be a large impervious layer under the soil layer, and it should not contain construction waste soil, saline-alkalized soil, soil contaminated by heavy metals and organic matter, and other harmful components. 3. * * Support and maintenance after planting ** - The clustered seedlings that were planted together should be partially trimmed. The tree species that were prone to volatile aromatic oil and resin should be trimmed one week before transplanting. The wounds above 2 cm should be smooth, disinfected, and applied with protective agents to improve the survival rate. - The support was fixed at two-thirds of the height of the tree. If the trees were planted together, they might need to be fixed with wooden planks. The daily management and maintenance needed to reach about two years. When the tree shape and crown width were better, they would be taken out of the nursery. * * 2. Soil ** It was best if the soil was fertile because the clumps of hackberry trees had high nutrient requirements. If the soil was barren, it was easy for them to grow poorly or even die. * * 3. Overall Cultivation ** 1. * * Selection of pots (for bonsai cultivation)** - If you want to cultivate the potted plants of the hackberry trees, it is generally appropriate to use purple sand pottery or glazed pottery pots. According to the shape of the hackberry tree, you can choose a rectangular, square or oval basin. The color of the basin should be light yellow or ochre brown to contrast with the leaves and bark of the hackberry tree. 2. * * Soil Selection (for bonsai cultivation)** - The adaptability of hackberry trees was relatively strong, but when cultivating bonsai, the farmland soil could be mixed with sand or chaff ash to make soil. 3. * * Planting (for bonsai cultivation)** - Generally, it was planted after autumn or before the tree sprouted in spring. When planting, the root system should be properly trimmed and sorted out, minus the long trunk, leaving more side roots and roots, choosing loose fertile soil, and at the same time, the branches and leaves should be properly trimmed. The potted plant was used to prevent the roots from being too deep. After covering the roots with soil, the roots were pounded so that the roots and the soil were tightly attached. Water management should also be done well. Water was sprayed on the hackberry tree once every morning and evening to keep the soil around the stump moist. 4. * * Post-planting Management (for general cultivation)** - After planting, they had to maintain a suitable temperature and humidity, and they were usually covered with plastic film. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
When planting dense white birch trees, the main consideration should be the local actual climate and land environment. It should be combined with the local actual climate. The following are some planting methods and technical points: ** I. Planting planning ** 1. ** Planting Area Selection ** - Half-slope land with high acidic soil was the priority area for planting. Because white birch trees liked acidic soil, although they liked light and warmth, direct sunlight was not the most suitable. The conditions such as light on the hillside were relatively suitable. - Soil and climate research was the prerequisite for large-scale planting. According to the soil and climate characteristics, the planting area should be rationally arranged to avoid some problems that may be encountered during planting and reduce losses. 2. ** Unsuitable planting area ** - It should not be planted on the side where the sun shines directly. It should not be used as a roadside tree. It can be used as a landscape or courtyard tree, but it must be planted in a shady area. ** 2. Seed treatment ** 1. ** Seed selection ** - Seeds of better quality should be selected and treated with the soaking method. Usually, they should be soaked for 24 hours and disinfected with chemical soaking for about 2 days before they could be planted. - When planting, the seedling seeds could not be directly covered on the surface of the soil. Instead, a thin layer of suitable soil should be attached to the surface of the seeds to prevent the sand from blowing them off. ** 3. Planting techniques (spring and autumn planting)** 1. ** Planting target selection ** - Choose a small tree (about 3 cm) as the planting target. 2. ** Selection of transplant area ** - It was the best in the plains of the northern border. The survival rate was very low in areas with slightly higher altitudes. 3. ** Earth Ball Requirement ** - When transplanting, the soil ball should be 10 times the diameter of the tree. 4. ** Soil Requirement ** - Adapt to slightly acidic soil. If the soil quality does not match, improve the soil. In order to save costs and achieve results, planting holes were generally used for soil improvement, so that the PH value of the planting soil reached 5.0 - 7.0. It was mixed with organic fertilizer and slag to increase the nutritional content and breathability of the soil. In addition, white birch trees should not be soaked in water and needed to be drained well. 5. ** Planting depth ** - When planting, it should not be buried too deep, and should be consistent with the original planting depth. 6. ** Fertility ** - When planting, a small amount of organic fertilizer (sheep manure: must be fermented mature fertilizer) was put at the bottom of the pit. Because sheep manure was slightly acidic, it could improve the soil quality. 7. ** Watering ** - To ensure the timely supply of water. ** 4. Management ** 1. ** Transplant Management ** - The transplanting method was to transplant the surviving white birch seedlings on a large scale. When transplanting, pay attention to the main climate characteristics of the intended transplanting site, consider the soil characteristics, and transplant with soil. - The transplanting method had to be in line with the growth characteristics of the tree itself. It could not be transplanted with a "root system". After transplanting, it had to ensure that the soil depth of the planting ground was similar to the original growing ground. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
The following is the price list of the clumped hackberry (different crown sizes, market prices will fluctuate, you need to consult): - 20-centimeter clumped hackberry trees were priced between 1800 to 2200 yuan. - 30 cm thick clumps of hackberry trees were priced between 2000 to 4500 yuan. - A 40-centimeter clumped hackberry would cost 3500 to 6800 yuan. - A 50-centimeter clumped hackberry would cost 4000 to 8000 yuan. - A 60-centimeter clumped hackberry would cost 5000 to 12000 yuan. - A high-quality clumped hackberry with a diameter of 20cm would cost 3200 yuan when sent to the construction site. - A 25-cm chest high-quality clumped hackberry, 4500 yuan per tree; - 3 - 4 cm, 5 stems, native non-mixed planting, 6 meters tall clumped small hackberry, 160 yuan/plant; - 50 - 120 cm clumped hackberry, 2400 yuan per tree; - 30 - 100 cm clumped hackberry, 3200 yuan per tree; - 25 - 40 cm clumped hackberry, 850 yuan per tree; - 8 - 9 meters of clumped hackberry, 3000 yuan per tree; - 5 70cm clumped hackberry trees, 3500 yuan per tree; - 3 - 6 trunks, 50 - 120 cm, 6 - 12 meters tall clumped hackberry, the price varies according to quality and other factors; - The original clumped hackberry trees were 9 - 12 meters tall, and the price was one tree. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
The clumps of hackberry trees are tall trees. It was a large-scale decidual-leaf tree that could grow to about 20 meters long. It had a beautiful tree shape and a wide crown. It was planted all over the country and was often used for many purposes such as landscape planting. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
The price of the clumped hackberry had a large fluctuation range. Whether its price was expensive or not depended on many factors, such as specifications, quality, market supply and demand, etc. Judging from the specifications, the prices of clumps of hackberry trees with different breast heights were obviously different. For example, a clumped hackberry tree with a diameter of 20 cm would cost about 1800 - 2200 yuan; a tree with a diameter of 30 cm would cost 2000 - 4500 yuan; a tree with a diameter of 40 cm would cost 3500 - 6800 yuan; a tree with a diameter of 50 cm would cost 4000 - 8000 yuan; and a tree with a diameter of 60 cm would cost 5000 - 12000 yuan. There were also some prices for clumped hackberry trees of different specifications and quality on the market. For example, the price of clumped hackberry trees of 10 - 12 cm was 2100 yuan per tree, 3500 yuan per tree, and so on. There were also clumped hackberry trees of 100 cm, but the exact price was not specified. In terms of market supply and demand, due to factors such as the sluggish real estate market, the sales volume of Pu Shu had decreased significantly, and the price had also fallen by more than 40%. Under such circumstances, the price had decreased compared to before. Therefore, it could not be simply said that the clumps of hackberry trees were expensive or not expensive. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
If you want to plant the clumps of hackberry trees correctly, you can do it according to the following steps: 1. " Sapling selection: Choose healthy saplings with well-developed roots and beautiful tree shapes to ensure their survival rate and growth effect. 2. " Locating the planting location: Choose a location with sufficient sunlight and air circulation, and consider the impact of the trees on the surrounding environment and buildings after they grow. 3. Dig the planting pit: The depth and width of the planting pit should be adjusted according to the size of the sapling and the root system to ensure that the root system can be fully expanded. 4. Fertility: sprinkle a suitable amount of organic fertilizer in the planting pit to provide nutrients for the growth of the saplings. 5. Planting: Put the sapling into the planting pit, hold the trunk with one hand, and gently put the root into the pit with the other hand until the soil in the pit covers the root. 6. Compacting Soil: Gently compress the surrounding soil to stabilize the sapling. 7. Watering: Watering in time to keep the soil moist and promote the growth of the saplings. 8. Trimming: After planting, the branches and roots that are withered, dried, and damaged by pests and diseases are trimmed regularly to keep the tree clean and tidy. Note: 1. Clumping hackberry trees like warm and humid environments, so they should avoid prolonged cold, low temperatures, and dryness. 2. During the growth of the saplings, there may be a phenomenon of trunk competition. It needs to be trimmed in time to ensure that the trunk grows vertically. 3. The crown of the clumped hackberry tree was dense. It was necessary to trim the pests, dead branches, etc. in time to ensure the health and beauty of the tree. In addition, one could also choose smaller hackberry seedlings to be planted together. This kind of planting did not have high technical requirements, and the seedlings were not affected by temperature and season, so it could be carried out throughout the year. "Life Like a White Birch" is equally exciting. Everyone is welcome to click and read it!
The planting methods and techniques of crabapple flowers included the following points: 1. [Soil choice: Begonia flowers like to grow in loose, fertile, well-drained soil.] One could choose loose and fertile soil with good ventilation and drainage to plant crabapple flowers. 2. Light and temperature: crabapple flowers like a semi-cool environment, but they also need sufficient sunlight. When planting, choose a place with good shade and environment for planting. The most suitable temperature for crabapple flowers to grow was 15 - 28 ° C. 3. Watering and fertilizing: Begonia flowers had a high requirement for water, but they could not be overwatered to avoid causing the roots to rot. Under normal circumstances, watering 2-3 times a week to keep the soil moist was enough. In terms of fertilizer application, you can choose organic fertilizer or compound fertilizer to apply. You can apply fertilizer once or twice a month, and pay attention to avoid excessive fertilizer application. 4. Trimming and maintenance: The trimming of crabapple flowers can promote the growth of its branches and flower buds. It is usually trimmed in spring and autumn. At the same time, they should pay attention to the prevention and control of pests and diseases, discover them in time and take corresponding prevention and control measures. In short, planting crabapple flowers required choosing suitable soil, providing appropriate water and sunlight, regular trimming and maintenance, and paying attention to the control of pests and diseases. These techniques and precautions could help the crabapple flower grow and bloom healthily.
The planting techniques of the Muscat Grape were as follows: 1. ** Seedlings selection **: Choose an annual seedling with a stem diameter of more than 0.4 cm, more than 5 lateral roots, and 3 - 5 flower buds. 2. ** Seedlings treatment **: 1 - 2 days before transplanting, soak the roots of the seedlings in clear water for 12 - 24 hours, so that the roots can absorb enough water. 3. ** Land selection and preparation **: Choose a plot of land with fertile soil, convenient drainage and irrigation, moderate underground water level, neutral or slightly basic loam, gentle slope, and flat terrain. Before planting, dig deep into the soil, remove debris, and dig planting ditches with a depth of 80 - 100 cm. The ditches were filled with a mixture of 20 cm thick straw crop debris and topsoil, and 3000 - 5000 kg of decomposed farmyard fertilizer was applied per mu. After the filling, the ridge was repaired, water was added, the soil was compressed, and fine harrowing was carried out. 4. ** Transplanting time **: Generally, the seedlings should be transplanted at the end of November or the beginning of April of the next year. It is suitable to raise seedlings in the nutrition bowl in April to May. 5. ** Transplanting method **: Dig a hole according to the depth of the seedling. For large areas, you can use a hole cutter. After planting, water the soil on time. " Rose Fragrance Shadow: The Story of Sweetheart's Growth " was equally exciting. Everyone was welcome to click and read it!
Longan fruit tree planting techniques included the following aspects: ** 1. Build a garden ** 1. ** Garden selection ** - ** Terrain **: avoid areas where there are often strong winds (especially northwest winds), or areas where cold air is easy to accumulate. - ** Soil requirements **: Choose red loam, yellow loam, sandy loam, alluvial soil, etc. with loose soil, deep soil layer, good ventilation, and strong water and fertilizer conservation ability. - ** Water Source Condition **: Choose a location close to the water source to build the garden. Good irrigation conditions are the guarantee for the high and stable yield of the longan. If water could be diverted to build a pond to ensure better spraying and drought irrigation, the hillside could also be developed if it could meet the irrigation conditions. - ** Climatic conditions **: Frost is the main factor limiting the cultivation of longans. Temperatures below-2 to 3 degrees will cause serious frost damage. Longans should be avoided in areas with severe frost. 2. ** Selection of Cultivars **: The selection of cultivated varieties mainly depends on the market demand, the adaptability of the variety in the cultivation area, and the level of cultivation techniques. For example, Chuliang, Shixia, Gushan No. 2, and Shuanggemu were all excellent varieties. 3. ** Planning and construction of the garden ** - ** Road Setting **: Arrange main roads and tractor roads that are conducive to transportation according to the terrain. - ** irrigation system **: Longan cultivation requires a large amount of water. Establishing a complete irrigation system (including water source, water lifting equipment, reservoir, manure tank, water pipeline, etc.) is conducive to the high-yield cultivation of longan. - ** Construction of terraces **: Before planting in hills and mountains, horizontal terraces should be built, or after planting along the contours, horizontal terraces should be built to improve the soil's water and fertilizer conservation ability. 4. ** Planting ** - ** Planting density **: Longan planting should not be too dense, 30 - 50 per mu is suitable, and the plant spacing is 4.5 meters x 5 meters, 4 meters x 3 meters. - ** Pre-planting preparation **: The size of the planting hole mainly depends on the amount of organic fertilizer used for soil improvement. It should not be less than 0.8×0.8×0.6 m in length × width × depth. Topsoil, weeds, pond mud, garbage, pig and cattle manure, and chicken manure can be used as the base fertilizer for filling holes. It can be layered or mixed to fill holes. Generally, it can be retting for 1 - 2 months after filling before planting. - ** Selection of seedlings **: The requirements are pure breed, strong growth, dark green leaves, developed roots, no pests, and more than two mature branches above the transplanting port. ** 2. Planting time **: Choose the best varieties that are suitable for the local environmental conditions and plant them in spring and autumn. It is better to plant in spring before the spring buds appear and after the late frost, or after the spring shoots grow and enrich, it is easier to survive. ** 3. Grafting Technique ** 1. If the sprout is not smooth, it needs to be flattened several times. After cutting the whole wood, insert the sprout and press it with your fingers. 2. He wrapped the film with the Grafting Film, rolled it four or five times, and then pulled the Grafting Film into a line to tie it. He wrapped each bud eye, and normally, two to four bud eyes were enough. Finally, he tied a knot to complete the Grafting.
" Potato Planting Technique and Management Teaching Plan and Reflection " Teaching plan: First of all, potatoes had to be planted in a good land. Loose, fertile, and well-drained land was the best. Before planting, you have to cut the potatoes into pieces. Each piece has to have bud eyes. Then, he dug a trench, put the potato pieces in, and covered it with soil. It was also important to apply fertilizer. The base fertilizer had to be applied sufficiently, such as organic fertilizer. As for watering, it could not be too much or too little. It had to be determined according to the humidity of the soil. During the growing period, they had to pay attention to weeding. Weeds would snatch the nutrients of the potatoes. There was also the control of pests and diseases, such as late plague, which had to be treated in time. Reflection: In the process of teaching, he found that some parts were not detailed enough. For example, the size of the potato slices was not too precise, which might affect the sprouting and growth of the potatoes. There was also the amount of fertilizer. It only said that the base fertilizer was applied, but it did not specify how much was appropriate. This was not easy for the actual grower to grasp. He had to add in these details in the next lesson to make the lesson plan more complete. That way, it would be easier for everyone to learn. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The planting and management techniques of machine-picked tomatoes in Xinjiang included the characteristics of seedling transplanting and the "two heavy and two light" water and fertilizer management techniques. In terms of seedling transplanting, generally in the greenhouse at the beginning of March, 128-hole plates were used. The seedling age was 45 - 50 days. When the seedling had 4 - 5 true leaves (mid-late April or early May), it was transplanted to the field and harvested from late July to September. Due to the small holes in the plug and the long seedling cultivation time, the root development of the seedlings was hindered, and a large amount of nutrients and water were urgently needed after transplanting. The key points of the "two heavy and two light" water and fertilizer management technology are as follows: 1. ** Before transplanting **: Accumulate enough water to ensure that the transplanted seedlings have sufficient water and no wilting and dehydration. 2. ** After transplanting the seedlings (Stage 1: During the seedling recovery period, after transplanting the seedlings to before the first bloom)** - ** Characteristic of fertilizer requirement **: During the root growth stage, the ability of the root system to absorb water and fertilizer is weak. However, it is the critical period of nutrition, so the need for fertilizer is urgent. The lack of fertilizer will affect the growth and yield in the middle and later stages. It is difficult to make up for it with fertilizer in the later stages. - ** specific management measures **: top dressing once, the amount of fertilizer applied is about 20% of the total amount of fertilizer applied. The amount of fertilizer applied to fields with different fertility was different. For fields with good soil fertility, 6 - 8kg of carbolic acid +4kg of monocrescent acid +3kg of potassium-sulfuric acid were applied with water droplets every 667m2; for fields with medium fertility, 8 - 10kg of carbolic acid +5kg of monocrescent acid +4kg of potassium-sulfuric acid were applied with water droplets every 667m2; for fields with poor fertility, 10 - 12kg of carbolic acid +6kg of monocrescent acid +4kg of potassium-sulfuric acid were applied with water droplets every 667m2; 25 - 30 m cubic per 667 m squared. When the fertilizer was applied with the water droplets, according to the amount of water and soil conditions, the fertilizer was applied 0.5 - 1.0 hours before the end of the water droplets, so that the fertilizer gathered around the tomato roots to improve the absorption and utilization rate of the fertilizer. In addition, the planting area of machine-picked tomatoes in Xinjiang is mainly concentrated along Tianshan Mountain in northern Xinjiang and Yanqi Basin in southern Xinjiang. This area is dry and rainy in summer and autumn, with sufficient sunlight, suitable for tomato growth. At present, seedling transplanting and planting were basically realized in production. However, the previous water and fertilizer management used the direct sowing planting method, which had the phenomenon of heavy nitrogen and phosphorus, lack of calcium and potassium in fertilizer application, and heavy late stage and light early stage in management. The "two heavy and two light" technology could solve such problems and promote the fruit to mature in a concentrated manner, shorten the maturity period by 5 - 10 days, and realize the concentrated harvesting of the whole field. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>