Model and specifications of hw steel
According to the current national standard "Hot-rolled H-shaped steel and split T-shaped steel"(GB/T11263 - 2005), the specifications of HW-shaped steel (wide-edge H-shaped steel) ranged from 100mmx100mm to 400mmx400mm. The model specifications were expressed as hw250 *250*9*14, where HH represented the wide wing H-shaped steel, the first 250 represented the height of the H-shaped steel was 250mm, the second 250 represented the width of the H-shaped steel was 250mm, 9 represented the thickness of the web, and 14 represented the thickness of the wing plate. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Square steel model, specifications size
Square steel specifications and sizes are 15*15, 20*20, 25*25, 30*30, 35*35, 40*40, 45*45, 50*50, 55*55*(0.5 - 6)，60*60，65*65，70*70，75*75，80*80，85*85，90*90，95*95，100*100，105*105，110*110，115*115，120*120，125*125，130*130*(1.5 - 10)，140*140，150*150，160*160，170*170，180*180，190*190，200*200，210*210，220*220，230*230，240*240，250*250，260*260，270*270，280*280，290*290， 300*300 - 500*500*(3 - 14)。In addition, there are commonly used specifications such as 6*6mm and 5*5mm, as well as different cold-drawn seamless square steel pipe sizes such as 12O.8 and 141.0 (including basic size, cross-section area, theoretical mass, moment of inertia, cross-section coefficient and other related parameters). The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
300* 300h steel specifications
The following are the specifications of some 300*300 H-shaped steel: - A typical size in China was 300×300×10×15 (unit: mm), and the corresponding weight was 22.1 kg/m. - The European standard H-type steel HEB300 (300*300*11*19) has a section height of 300mm, a width of 300mm, a web thickness of 11mm, a thickness of 19mm, and a yield strength of not less than 300N/mm2 (some information mentioned that the yield point was not less than 325MP, but the mainstream information was not less than 300N/mm2). The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-shaped steel specifications
The size specifications of the hot rolled H-shaped steel can be extracted from the specifications of the national standard, which includes H (height), B (width), t1 (web thickness), t2 (wing thickness), r (process corner) and other parameters to determine its specifications. The specifications of the European/British/German standard H-shaped steel include HEA100-HEA1000, HEB100-HEB1000, HP200*53.5 -HP 400 * 231, HD 260 *68 - HD400*231, UA 127 *76 -UA 1016*305, UA 127*76 -UA 356 * 368, UA 203*203 -UA 356*368, and UA 920*344 -UA 1100. The implementation standards are EN10025 - 2, EN10025 - 4, and EN10025 - 5. The materials are S235JR/J0, S275JR/J0/J2, S355JR/J2/K2/M/MT/TL/J0XP/J2XP/J0W/J2W, S450J0, and S460M. However, only some common specifications were provided, and it might not cover all the specifications of H-shaped steel. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Steel specifications and weight list
The following is the specifications and theoretical weight of some steel sections: 1. ** Round Steel **: - For size 6, the weight per meter was 0.222kg/m; for size 7, the weight per meter was 0.3848kg/m; for size 8, the weight per meter was 0.395kg/m; for size 9, the weight per meter was 0.499kg/m; for size 10, the weight per meter was 0.617kg/m; for size 11, the weight per meter was 0.746kg/m; for size 12, the weight per meter was 0.888kg/m, etc. 2. ** Flat steel **: - 20*4, 0.63kg/m; 22*4, 0.69kg/m; 25*4, 0.79kg/m; 25*5, 0.98kg/m; 30*4, 0.94kg/m; 30*5, 1.18kg/m, etc. 3. ** Channel steel **: - Model 5, 5.44kg/m per meter; Model 8, 8.04kg/m per meter; Model 10, 10.00kg/m per meter; Model 12, 12.06kg/m per meter; Model 14a, 14.53kg/m per meter; Model 14b, 16.73kg/m per meter, etc. 4. ** I-beam **: - Model I10, weight per meter: 11.261kg/m; Model I12, weight per meter: 13.98kg/m; Model I22a, weight per meter: 33.072kg/m; Model I22b, weight per meter: 36.524kg/m; Model I25a, weight per meter: 38.105kg/m; Model I25b, weight per meter: 42.035kg/m. 5. ** H-type steel (HH series)**: - HW100x100x6x8, weight per meter 16.9kg/m;HW125x125x6.5x9, weight per meter 23.6kg/m; HW150x150x7x10, weight per meter 31.1kg/m, etc. 6. ** H-type steel (HN series)**: - HN248x124x5x8, weight per meter 25.1kg/m; HN250x125x6x9, weight per meter 29kg/m;HN298x149x5.5x8, weight per meter 32kg/m, etc. 7. ** H-type steel (Hm series)**: - HM148x100x6x9, weight per meter 20.7kg/m; HM194x150x6x9, weight per meter 29.9kg/m; HM244x175x7x11, weight per meter 43.6kg/m, etc. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
HW500 steel weight comparison table
The following are some of the HW500 steel weight data: - HW500 *350, weight per meter 146 Kg; - HW500 * 350A, weight per meter 179kg; - HW500 *400, weight per meter 162kg; - HW500 * 400A, weight 199kg per meter. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
50A I-beam specifications, model size
The specifications and dimensions of the 50A I-beam were as follows: height 500mm, leg width 158mm, waist thickness 12mm, middle thickness 20mm, inner arc radius 14mm, and leg end arc radius 7mm. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
Common specifications of rectangular steel pipe
There are many common specifications for rectangular steel pipes. The following are some common ones: 1. 10 cm by 20 cm by 0.3 cm- 1.2 cm; 2. 20 cm x 50 cm x 0.6 cm- 1.6 cm; 3. 6 cm x 10 cm x 0.25 cm- 0.6 cm; 4. 10 cm x 30 cm x 0.4 cm- 1.2 cm; 5. 30 cm by 50 cm by 0.6 cm- 1.6 cm; 6. 6 cm by 12 cm by 0.25 cm- 0.6 cm; 7. 15 cm by 20 cm by 0.3 cm- 1.2 cm; 8. 40 cm by 60 cm by 0.6 cm- 1.6 cm; 9. 400 times 600 times 6.0 - 16; 10. 150 times 200 times 3.0 - 12; 11. 60 times 120 times 2.5 - 6.0; 12. 300 times 500 times 6.0 - 16; 13. 50 times 100 times 1.5 - 5.0; 14. 60 times 80 times 2.0 - 5.0; 15. 80 times 120 times 2.5 - 8.0; 16. 100 times 200 times 3.0 - 12; 17. 200x200 - 1400x1400 (6 - 40mm wall thickness); 18. 10*10*0.8 - 1.5 to 500*500*10 - 25. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Common H-shaped steel specifications
The following are some common H-shaped steel specifications: - The domestic H-shaped steel specifications (execute the national standard for H-shaped steel). For example, the wide-flanged HH series has specifications of 100×100, 125×125, 150×150, 175×175, etc. - European standard H-type steel HFA series has HFA 100 (size 100×100×6×10), HUA 120 (size: 120×120×6.5×11), HUA 140 (size 140×140×7×12), etc.;HEB series has HEB100 (size 100×100×6×10), HEB120 (size 120×120×6.5×11), HEB140 (size 140×140×7×12), etc. The HEM series includes HE120M (size 140×126×12.5×21), HE140M (size 160×146×13×22), HE160M (size 180×166×14×23), etc. Different series of H-beam steel had differences in height, width, and thickness of the edge, and different specifications and models would be used for different engineering needs. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-shaped steel 200x150 specifications and parameters
The specifications of H-shaped steel 200x150 were different under different standards: - For the high-frequency welding H-shaped steel 200x150x4.5x6, 200 represented height, 150 represented width, 4.5 represented web thickness, and 6 represented wing thickness. - The Japanese standard H-shaped steel 200 x 150 was 19…(The information is not fully displayed, but from the other specifications of the Japanese standard that have been given, it should be similar to the previous representation method, 19... Part of it should be complete data on the thickness of the web and wing plates). - For the European standard H-shaped steel, it was commonly expressed in the form of "H height ×B width ×T web thickness ×R bending radius"(R was omitted in some cases). The specific complete data under the 200 × 150 specifications was not found, but it could be speculated that if there was such a specifications, it should be expressed in this way. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
U-shaped steel specifications and weight list
The specifications and theoretical weight of the U-shaped steel are as follows: - The theoretical weight of 18UY was 18.96kg/m; - The theoretical weight of 25UY is 24.76kg/m; - The theoretical weight of 25U is 24.95kg/m; - The theoretical weight of 29U is 29.00kg/m; - The theoretical weight of 36U is 35.87kg/m; - The theoretical weight of 40U was 40.05kg/m. There were many sizes available, such as 50×30×15×2.0mm, 63×40×15×2.3mm, etc. The U-shaped steel produced in China mainly had four types: 18U, 25U, 29U, 36U, and 40U (18U and 25U were products from the 1960s, which belonged to the waist positioning; 29U and 36U were products from the 1980s, which belonged to the ear positioning. The carrying capacity of 18U was very low, and it was rarely produced now). The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!