Exterior photography parameters
When shooting outdoors, different subjects had different settings. If it was an outdoor portrait, the shutter speed was generally 1/100s, the USB was 100, and the aperture was F1.2 - 2.8. When shooting scenery, the focus could be auto-focused during the day and manually focused at night. The dimming was selected to be centered. The aperture should be F8, F9, F11, and other small apertures. The shutter speed was determined by the subject. The USB was about 100 during the day when there was sufficient sunlight. It was best to ensure that it was between 100 - 800 during the rest of the time. If it was too high, the image noise would be high. When shooting still life photos and the outdoor lighting is good, the shooting mode can be set to the LV mode, the USB is set to 100, the aperture is opened to the maximum and maintained above F4, and the focal length is determined according to the shooting scene. The closer to the subject, the more obvious the blurring. Read more exciting novels for free
Exterior photography of Hefei
There are many places in Hefei that are suitable for outdoor photography. Here are some places: - ** City Building Category **: - ** Huarun Vientiane City (camera: Amber Fifth Ring City, Building 7, rooftop terrace)**: There are the tallest east and west twin towers in Hefei, which are dazzling and charming. Together with the residential complex of the green axis plate, it can form a group of charming urban scenery photos. - ** Wulidun Teleportation Building (camera position: Wanke·Jinyu Huafu Building 15 roof terrace/Xinpeng Building 30 floor, 31 floor terrace)**: Wulifei Rainbow and Teleportation Building are landmark buildings in Hefei. It was once the tallest building in Hefei. It was one of the top ten sights and classic covers in Hefei, attracting many foreign photographers. - ** South Fei River Peninsula (camera: Yujing Bay West Gate Building 1 rooftop terrace)**: South Fei River flows through the city and flows into Chaohu Lake. There are many beautiful scenery along the way. The Peninsula formed by the tall buildings and the Fei River can be used to take beautiful photos of the city scenery. - ** West Second Ring Road and Huangshan Road Overpass (camera position: rooftop terrace of Boao Liyuan Building 7)**: Although it is not as spectacular as the large overpasses built later, the neat and symmetrical layout makes it beautiful. It is a classic camera photo shooting location. - ** Shouchun Road Bridge (camera position: Huaihe Road Bridge)**: Standing on the Huaihe Road Bridge, you can take pictures of Shouchun Road Bridge. The reflection in the water adds color. This bridge from the late 1980s is even more eye-catching under the city lighting project. - ** Swan Lake (Multiple cameras: City Square viewing platform, South Bank Beach, Sports Park, Xindi Building)**: Swan Lake is the iconic location of Hefei, known as the "Gate of Anhui". The viewing platform on the north bank of the city square, the beach on the south bank of Swan Lake, the sports park, the Xindi Building, and other places were all very good cameras. They could capture the beautiful scenery of the office buildings, the new center of the broadcasting and television station, and the reflection in the lake. Different weather and time periods had unique shooting effects. - The Advanced Research Institute of the University of Science and Technology of China: The buildings here have the aesthetic form of a geometric composition. One hour before and after sunset, the sky will enter the Blues moment. The research institute in the distance and the nearby Qu River will form a close-up view of the scene. The main body will stand out. Coupled with the changing sky, it is easy to take beautiful photos. - [An Nong University: There are spiral stairs in the teaching building of An Nong University, which is suitable for architectural scenery and portrait photography. Many beautiful photos have been taken here. Pay attention to the composition to highlight the geometric shape of the stairs.] - ** Emerald Lake Bridge **: Emerald Lake was one of the classic holy places for photography in Hefei. - ** Natural Landscape Category **: - Nanfei River: As the mother river of Hefei, there are many wonderful scenic spots along the way, such as the scenery of the Peninsula, which is a good element for outdoor shooting. - ** Swan Lake **: Swan Lake itself is also a place with a good combination of natural landscape and urban landscape. Its lake scenery, surrounding beaches, parks, etc. can be used as a scene for outdoor photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Exterior photography in Zhang Jiakou
There were many places suitable for outdoor photography in Zhang Jiakou. For example, Tianmo Film and Television Base in Huailai County, Qinghe Film and Television Base in Qiaoxi District, and Nuanquan Ancient Town in Yu County were selected as key film and television outdoor shooting locations in Hebei Province. Wanquan Youwei Castle could also be used as a filming location. In addition, there was also a professional photography service team that provided outdoor photography services. The service content included natural scenery, urban scenery, architectural photography, etc. The service area covered the districts and counties under Zhang Jiakou. The photographer would formulate a shooting plan according to the needs and venue conditions. There was also a professional post-production team that could edit, color, special effects, and other processes. They also had advanced equipment, paid attention to quality and details, and adhered to the principle of customer first. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Exterior photography rental in ningbo
The following is the location rental information for the photography studio in NingBo: - There is a 5513 PM manor in Haishu District of Ningbothat provides outdoor rental services. The market price for outdoor shooting in the manor (within 8 hours) is 10000 yuan per scene, and the VIP price is 8000 yuan per scene. If it is an advertisement outdoor shooting (within 8 hours), the market price is 1500 yuan per scene, and the VIP price is 1200 yuan per scene. The market price for the interior shooting of the manor (within 8 hours) is 1500 yuan per scene, and the VIP price is 1200 yuan per scene. The market price for bar interior shooting (within 4 hours) was 750 yuan per scene, and the VIP price was 600 yuan per scene. The exterior shooting in the manor (within 8 hours) was 2500 yuan per scene (market price) and 2000 yuan per scene (VIP price). Requires a deposit of 5000 yuan. Large filming projects and activities involve external electricity (cables). Electricity charges need to be settled separately.(The total electricity management fee + electricity fee is 1000 yuan; if the actual electricity fee exceeds 1000 yuan, it will be charged according to the commercial electricity fee standard: 1.5 yuan/kWh), and all shooting projects are set to be one session. If it is less than one session, it will be counted as one session. The excess will be accumulated at 280 yuan per hour. Horse shooting will be charged separately. The number of people shooting Short videos and flat advertisements will be limited to 10 people. - Fuming, Yinzhou District, Ningbo-Building 12, Xintiandi Business Building, Fuming Road, Yinzhou District, Ningbo City is a studio for rent. The studio price is 50 - 100 yuan per hour, starting from 4 hours. The basic equipment includes black and white curtains, air-conditioning, small full-length mirrors, shelves, projector, sofa, drinking water, audio, broad-band, refrigerator and other facilities. If you need more time or lighting equipment, the price will be calculated separately. The shooting area is 30 square meters, suitable for shooting people, Taobao, interview videos. funny videos or food clips. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Exterior lighting props for photography
There were several types of lighting props for photography: 1. ** Reflecting Plate **: - The silver-faced reflective board reflected strong light and reflected white light. It was suitable for making up for shadows when the sun was strong. - The gold surface had a high reflective rate and reflected warm light. It was suitable for topics that required the skin of the characters to be warm. - The white surface reflected less light, but the light was soft, which was good for showing the details of the skin. - There was also a black light absorbing surface that could absorb some light when placed next to a person's face, increasing the three-dimensional effect. Some of the reflective panels also had a soft light screen, which could filter light when the light was hard, making the skin look more delicate. When there was no shadow on the character's face but the eyes were dull, the reflective panels could be used to increase the light in the eyes. The multi-functional five-in-one reflective board was more practical. 2. ** fill light *: - ** Flash **: It is a common photography light that instantly emits a strong light to provide light for the subject. It is usually connected to the camera through the camera's hot shoes or sync cable. - ** Continuous Light **: Continuous light, can provide a stable light source for the subject, can observe the light effect at any time to adjust the direction and intensity of the light, suitable for shooting static objects. - ** Soft Light **: It softens the light and provides soft light for the subject, making the photo more natural and soft. It is suitable for taking pictures of people, scenery, etc. - Reflective Umbrella: Reflects light onto the subject, making the photo brighter and more layered. It can control the direction and intensity of light. It is suitable for shooting people, still life, etc. - There were also high-end fill light like the Aitux STORM 1200x, which had many features. For example, there were many types of lamp beads that could mix different lights, a wide range of color temperatures (2500K-10000K), and the brightness fluctuations of each color temperature were small. There were also different modes such as CIE daylight and blackbody daylight, waterproof, and high-speed photography mode. - Hobolite Mini fill light, power 20W, up to 1600 Lumen, 0 - 100% infinitely variable or 25% in one gear, color temperature 2700 - 6500K infinitely variable or 25% in one gear, color rendering index 96+, built-in color temperature filter, can create a variety of fill light scenes through the magnetic suction kit, easy to operate, there are fast charging, long battery life versions, there are also quick-release combination design. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
furniture photography parameters
When shooting indoor furniture, the key parameters were as follows: 1. ** Shutter Speed **: When shooting static furniture, you can choose a slower shutter speed to capture more light and show the details of the furniture. If the furniture or environment has dynamic elements, such as curtains fluttering, you should choose a faster shutter speed to freeze the action. 2. ** Aperture size **: Aperture affects the depth of field of the photo. If you want the furniture to stand out from the background, you can choose a larger aperture (such as f/2.8 or larger). If you want the front and back to be clear, you can choose a smaller aperture (such as f/8 or smaller). 3. ** Iso-value **: When there is sufficient light, you can choose a lower Iso-value (such as 100 or 200) to reduce noise. When the light is dim, you can increase the Iso-value appropriately, but pay attention to noise. 4. ** Focus mode **: You can choose the single-point focus mode to control the focus point more accurately. If the furniture is larger, you can choose the area-focus mode. 5. ** White balance **: The indoor light may be yellowish or bluish. You can correct the color deviation by adjusting the white balance. If you cannot confirm it, you can choose automatic white balance. Other than that, there were also things to note: 1. ** Composing **: Use composition principles such as the rule of thirds or the golden ratio to make the furniture more balanced and harmonious in the photo. 2. ** Lighting **: Try to use natural light. If you need supplementary light, you can choose soft light or a reflective board to avoid using flash directly. 3. ** Angles **: Try shooting from different angles, including bird's eye view, side view, 45-degree angle, etc., to show different sides of the furniture. 4. ** Shooting environment **: Try to keep the shooting environment simple and avoid too many background elements from interfering with the line of sight. 5. ** Post-processing **: You can adjust brightness, contrast, saturation, etc. through post-processing software to make the furniture photos more beautiful. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Portrait photography parameters
The following are some of the key settings for portrait photography: * * 1. Basic parameters in different scenarios ** 1. * * Exterior Portrait **: Shutter speed is usually 1/100s, with an IS of 100 and an aperture of F1.2 - 2.8. 2. * * In-room portrait **: Shutter speed: 1/80s, USB: 1500, Aperture: F2.8 or below. 3. * * Baby/Pet Shooting **: Shutter speed of 1/200s or above, with an aperture of F1.4 - 5.6, and an IS of 100 - 800. 4. * * Still life/gourmet shooting **: Shutter speed between 1/80s-1/200s, USB 100 - 400, aperture 1.2 - 4. 5. * * Star Chaser/concert shooting **: Shutter speed greater than 1/1000s, the range of the USB is 100 - 800, and the aperture is F2.8 - 5.6. 6. * * Night scene shooting **: Shutter speed: 10s-20s, USB: 100, Aperture: F10 - 22. * * 2. Mode Selection ** 1. * * Aperture priority mode ** - In the three major support items of aperture, speed, and sensitivity, the aperture size setting was first determined, and then the camera would set the speed and sensitivity parameters according to the shooting situation. This is suitable for controlling the depth of field in portrait photography. For example, if you want to blur the background and highlight the main body, you can use a large aperture such as f/1.4. If you want more background focus or want to maximize the image clarity, you can lower it by two or three gears to f/4, f/5.6 or f/8. 2. * * Automatic mode (P-grade shooting)** - For beginners, when learning photography, the focus should be on composition and light practice. The automatic mode can meet the basic shooting needs, and the aperture and speed settings should be put aside first. Although the images shot in this mode may lack personality, it can help the novice shoot first. 3. * * Speed priority mode ** - It was suitable for poor lighting conditions. First, the speed was determined. Then, the camera would set the aperture and sensitivity parameters. Under normal circumstances, it was recommended that the speed should not be lower than 1/100 second. When the shooting stability of the novice hand was poor, the speed could be set to about 1/200 second. As the shooting stability improved and the scene required, the speed could be gradually reduced to 1/80 or even 1/60 second. 4. * * Manual Mode (M)** - Beginners are not recommended to get involved. Most people think that this is not a good starting path for beginners to learn photography. * * 3. Natural Light Portrait Shooting ** 1. **ISO** - You should almost always choose the basic options of the camera, such as Iso100, Iso160, and Iso200, to avoid excessive noise and obtain the best image quality. When shooting in low light, you can first expand the aperture and reduce the shutter speed before considering raising the USB. 2. * * Shutter Speed ** - After setting the USB, he chose the appropriate shutter speed. You can check the light meter inside the camera, then adjust the shutter speed until you get a central (good exposure) reading. Take a test shot and check the camera's LCD screen and the bar chart to make sure that the bar chart is as far to the right as possible without the highlight being highlighted. If the light was too bright, he would continue to increase the shutter speed; if the image was too dark, he would increase the shutter speed. The general rule is to set the shutter speed to twice the focal length of the lens (or faster). For example, when using a 100mm lens, the minimum shutter speed can be set to 1/200. However, if you use a tripod, the camera's built-in stabilization function, or a lens with built-in stabilization function, you can use a slower shutter speed to shoot. * * 4. Flash Portrait photography ** 1. * * Shutter Speed ** - Simply set the shutter speed to flash sync speed, usually 1/200 second (if the sync speed is exceeded, a dark band will eventually appear at the edge of the image). 2. * * Aperture ** - Aperture was one of the three variables that controlled the exposure of a flash portrait (the other two were the USB and flash power). Technically speaking, the aperture could be selected according to the depth of field, but the larger the aperture, the lower the flash power needed to get a good exposure. It was generally set to around f/8, but it could be adjusted according to aesthetic (or exposure) needs. 3. **ISO** - Just like the natural light portrait, it was best to keep the USB to the lowest possible value to reduce noise and obtain a more detailed image quality. 4. * * Strobe Power ** - After determining the shutter speed, aperture, and Iso-level, you can adjust the stroboscopic power until you get a good effect. In addition, when taking photos indoors, to avoid or reduce the shadow of the flash: 1. Keep the character as far away from walls or objects as possible. 2. Choose a bright background. 3. The camera was positioned higher and more upright. 4. Block the flashes appropriately. 5. Use slow sync flash mode. Finally, it is recommended to set the brightness level of the camera's LCD screen to 4 or 5 and keep it unchanged. Don't set it to automatic, which will help measure the exposure value. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Exterior lighting renderings for costume photography
When shooting clothes on location, it was easy to be limited by objective natural light. Artificial light (photography lights) could supplement and correct natural light. For example, using the Lucceo led photography light to fill in the light of the main body, the shape, color, and texture of the main body could be accurately expressed, allowing the main body to stand out from the background or decorate the main body to create an atmosphere. At the same time, we must pay attention to the coordination and balance of artificial light and natural light, control the light ratio, pay attention to simplicity and practicality, and should not be too complicated. However, based on the current information, it was impossible to provide more specific content related to the lighting effects of the outdoor scene of clothing photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Clothing photography parameters setting
The following are some examples of clothing photography parameters: - When shooting a minimalist style clothing scene, the camera could use Canon 6D, 24 - 105mm lens, 100mm, f10 aperture, 1/100 shutter, 200 USB, 84mm focal length, 5500K white balance, two 400W SKII flashes, one standard mask, and a bunch of cube background props. However, it was important to note that when the lighting environment and light output were different, the parameters should be adjusted. The focus was on learning the lighting method rather than memorizing the parameters. - If the photo was taken on a cloudy day, the aperture (F) could be set to 8 and the sensitivity (USB) could be set to 400. If it was taken outdoors on a sunny day, the sensitivity could be set to the lowest value. - There were also corresponding parameters for different photo styles of the Sony-made camera. For example,"Fresh Green Tones": White Balance 4700K (B+1,G+4), creative appearance: Fresh, Sharpness Range +1, Saturation +2, Clarity +1, contrast-2, Sharpness +1, Fade +1, Highlights-2, Shadows +2."Fuji-like NG" White balance 5000K (B+1,G+3), creative appearance is fresh, sharpness range +2, saturation-2, clarity +1, contrast-1, sharpness +2, fade +1, highlight-2, shadow +1."Advanced Street Sweeper": White balance 4800K (B+1,A+0), creative appearance is neutral, sharpness range +2, saturation-2, clarity +2, contrast +2, sharpness +1, fade +2, highlight-3, shadow +2." White balance AWB(B+2,G+0.5), creative appearance is TL, sharpness range +2, saturation-2, sharpness +1, contrast +3, sharpness +1, fade +2, highlight-3, shadow +2. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The parameters of indoor conference photography
If the lighting in the meeting was good, he had to lower the IQ as much as possible. Otherwise, there would be a lot of noise when adjusting the lighting in the later stages. The aperture was usually around 8 - 11. When shooting indoor conference scenes, you can first use the automatic mode to check if the light measurement is normal, and then change to manual mode. The aperture is medium, the sensitivity is not too high, and the shutter is set between 1/125 and 1/250. The color temperature was determined according to the lighting of the scene, and was generally set at around 4000. If you use a flash, you can set the camera to aperture priority. First, set an aperture value to test the shot. If you are overexposed, adjust the aperture. If you are underexposed, adjust the aperture. There is no need to adjust the shutter. In addition, the camera could also use aperture 2.8 - 5.6, auto, shutter 1/125, auto white balance, and flash E/TL mode. The most practical shooting mode was shutter priority and exposure compensation +1 or so. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
iPhone photography adjustment parameters
Here are the settings for iPhone photography: 1. ** Picture composition assistance **: Open the phone settings-the grid lines in the camera can help you find the horizontal line and assist in composition. You can place the main body at the four intersection points of the grid (similar to the golden section point) to make the picture more beautiful. At the same time, he turned on the four options for composition to help him find the angle. He also turned on lens correction to prevent the image from being distorted. 2. ** Recording video parameters **: - In the phone settings-camera-recording video, you can choose 1080P60 frames, turn off HVR video, return to recording and choose the best format. - If you want to get a clearer picture quality, try to choose the largest format for recording video and recording slow motion parameters, but it will take up more memory. 3. ** HPR function **: Turn on smart HPR, which can combine different exposure parts during shooting, so that there are details in the light and dark parts, and balance the details in high-contrast scenes (such as backlit portraits or landscapes). 4. ** Shooting mode related parameters **: - ** Time-lapse photography **: Keep the phone charged and stored with sufficient memory and set it to flight mode to avoid interference. Find a suitable position to fix the phone and shoot. - ** Slow-motion **: The flash in the upper left corner is normally off; the 120. HD position in the upper right corner affects the clarity of the picture. You can choose between 120 and 240 frames. The more frames, the clearer the picture and the higher the video continuity. The video settings are similar to time-lapse photography. There are options such as 4K/HD picture and 30/60 frame rate. - ** Portrait shooting (if the phone supports manual aperture adjustment)**: Set a small f-value (such as f/2.0 or lower) to obtain a shallow depth of field, making the background soft and fuzzy, and the main body prominent. - ** Night scene shooting **: At night or in low-light environments, try to lower the USB to reduce noise, and extend the shutter speed according to the brightness of the environment (such as 1/10 second or longer). You can use a tripod to maintain stability. - ** Dynamic Capture **: When shooting a fast-moving object, switch to Shutter priority mode (S or Tv) and set a faster shutter speed (such as 1/500 seconds or faster) to freeze the action. - ** Long exposure **: In professional mode, set a slower shutter speed (such as 1 second or longer) and use a tripod to shoot a flowing silk effect or a traffic light track. - ** White balance adjustment **: By manually adjusting the white balance under different light sources, the color can be restored more realistically. - ** Shooting in raw format (if supported by the phone)**: Shooting in RAW format can preserve more raw data and allow more room for adjustment during post-processing, such as exposure, color, and detail restoration. 5. ** Picture adjustment for specific models (iPhone 16)**: click on the small square in the upper right corner. The standard version can adjust the color tone to 22 and the color to-54 (a small difference in the parameters will not affect it, and can also be slightly adjusted to 0.3). 6. ** Enhancement of Pieces **: Turn on the switch in the upper right corner when taking a photo to take a 48-million-pel photo with more details. 7. ** Photographic Style Setting **: You can set your favorite photography style according to your needs. If you want colorful, you can use the high contrast style. If you want to shoot food, you can use the warm tone style. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>