The principles of live photography
The principles of taking photos on the spot were as follows: 1. ** Principle of being timely, comprehensive, objective, and accurate **: The shooting should reflect the relevant scenes in a timely, comprehensive, objective, and accurate manner. 2. ** Equipment preparation principle **: The required equipment and equipment must be prepared properly so that they can be put into use in time after receiving the mission. 3. ** Principle of Order and Cooperation **: Observe the investigation order, obey the unified command, and coordinate with other technical investigations. 4. ** Principle of Planning and Conception **: Before shooting, you should plan and conceive the content and presentation of the shooting. During shooting, you should follow certain steps and order to carry out the shooting in a coherent and orderly manner. 5. ** Comprehensive shooting principle **: Take the initiative to take a comprehensive and detailed shot of all the scenes and details at the scene. For traces and items that are difficult to identify at the moment, they should also be shot according to the requirements. 6. ** Principle of clear theme **: The theme of the shot should be clear and prominent. If other inspectors require the shot, they should take the initiative to ask if they don't understand the shooting intention and theme. 7. ** Principle of avoiding irrelevant images **: Especially for the general picture of the scene and the photography of the key parts of the scene, try to avoid the inspection personnel, investigation equipment, vehicles, etc. from entering the picture. 8. ** Principle of Clear and Precise Reflection **: The aim is to clearly and accurately reflect the subject content of the scene being photographed, and the type of light source and angle of illumination should be reasonably selected. When using flash or other lighting, prevent reflections and bad shadows from damaging the theme of the picture. 9. ** Photometering and exposure principle **: Before shooting, the subject should be measured. For important scenes and evidence, a series of exposure should be carried out to avoid exposure errors. 10. ** Important material evidence confirmation principle **: Important material evidence must be taken by the witness. Read more exciting novels for free
Live photography download
If you want to do a live photography broadcast, you can consider downloading the Xiangpaiyun photography live broadcast platform app. It was an all-rounded retouching and live streaming tool with a powerful video content management engine. It could not only meet the daily use of ordinary users, but also meet the needs of enterprise level offices. It was suitable for conference shooting, wedding shooting, travel shooting, research shooting, sports events, news interviews, cultural performances, exhibition and many other scenes. It had a variety of functions, such as instant photo transfer (supports connecting to the camera through a data cable (requires an OTL port) or Wifi (requires the camera to have Wifi function). The photographer can press the shutter, and the photos can be uploaded to the exclusive cloud photo album through the Xiangxiang App.), instant repair, instant repair, instant enjoyment, instant enjoyment, and so on. The software could be downloaded from their official channels. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The necessity of live photography
There were many necessities for taking photos at the event site. First of all, from a memorial point of view, the event site photography could record the scenes, people, and moments of the event, leaving memories for the participants. Secondly, in corporate events and other scenarios, the live photography of the event could play a role in promoting the company. For example, taking photos or videos containing corporate logo, corporate leaders, and company-related activities could help to enhance the image and popularity of the company. In addition, for some specific events, such as photography exhibition, the live photography of the event was also an important way to show the results of the event and the works, so that more people could understand the content and significance of the event. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Live photography lecture
Here are some of the topics that might be covered in a live photography lecture: ** 1. Picture composition ** 1. ** Scenery location arrangement ** - When there were many scenes in the picture, they had to be arranged reasonably. For example, the brighter spots could be arranged at the golden nodes. If one side of the screen is empty, you can introduce elements in the background, such as trees and stones, to make the screen richer. 2. ** Picture Scale ** - The scale of the scene had to be determined according to the situation at the scene. For example, the proportion of the sky and water in the picture. If the light was too strong and the sky was exposed to the white board, the sky could be reduced and other elements such as the forest could be retained to make the picture more effective. 3. ** Using the framework ** - Learn to discover and use frame elements such as door frames and window frames. For example, when taking photos inside and outside the house, the contrast between light and dark was used to increase the storytelling and tension of the photo. 4. ** Comparatively applied ** - For example, in a landscape photo, the person was far away from the background and the photo was small. The person was in the middle with his back to the camera. The trees in the distance could enhance the extension, layering, and three-dimensional effect of the photo. - The contrast between the real and the virtual was to focus on one side of the picture and make the other side virtual, so as to avoid the feeling of emptiness caused by a large area of white space. - There was also color contrast, such as blue background and orange clothes to form a contrast between cold and warm, red embellishment to attract attention, and so on. ** 2. Shooting Techniques ** 1. ** Shooting time ** - Choosing the right time to shoot could make the scene more comfortable and gentle. For example, when taking a photo of the dewy ground in the morning, lowering the phone and focusing on the grass in the front would make the grass in the front clear and the houses in the background blurred. 2. ** Special Technique ** - For example, the color layering method of the multi-exposure layering technique used the three primary colors of red, green, and blue to add color to the colorless image to express the theme and style. - People who used the slow door to shoot sports could make the long hair and splashing water give people a sense of freedom. ** 3. Enhancement of aesthetics (helps to understand photography)** 1. ** Dimension of Reading Works ** - You can read a work from the composition, light, color, clothing, movements, photographer's thoughts, expression, and other dimensions. For example, he learned the composition from the photos of the streets with a sense of depth. The model was in the middle, and the teenager behind him rode past. The contrast between the two clothes and state brought a sense of story. He learned the light and shadow from the photos of the light passing through the rattan chair, and the light that illuminated the part made it more mysterious. 2. ** Ways to obtain high-quality works ** - Reading books, such as "History of World Photography","On Photographs","My Distance from the World","The Character of Color","The Beauty of Photographs","The Pleasure of Good Photographs","Photographs as Modern Art","Revelation of Photographs", etc. - Reading magazines, such as GOGUE (Fashion Festival, the world's most influential independent art magazine), Fudge and Popeye (Daily wear can be learned), Elle (Focus on the combination of fashion and life), dossier (Combining traditional culture and fashion), etc. - Watching movies, such as Out of Africa, Assassination of Kennedy, The English Patient, The Last Emperor, Inception, Life of Pi, Birdman, Apocalypse Now, Oppenheim, etc. - Looking at world-famous paintings (Can be understood through easy-to-understand methods like Xiao Gu talking about comics). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Online celebrity photography live video
The live video of the internet celebrity's photography showed many situations. Some of the internet celebrity photography sites, such as Sister Dongbei Yu's filming site, had professional equipment and crew members. Although Sister Yu herself appeared to be at a loss, she was also cooperating with the filming. This reflected the situation of the internet celebrity's careful operation from grassroots to professionalism. There were also scenes like the shooting of the million-star OK Sister. The lights were set up, and OK Sister had already applied for a venue before changing her clothes and was equipped with a fire extinguisher. However, there were also some indecent internet celebrities shooting scenes. For example, some female internet celebrities made some embarrassing and uncomfortable shooting actions to attract likes. In addition, at the funeral scene of the internet celebrity " Yunnan A'Kui," it should have been a solemn and sad occasion, but it was surrounded by some anchors to take photos to gain popularity. This also reflected the chaos of traffic chasing behind some of the scenes shot by internet celebrities. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Live light, artificial light, photography
Here are some key points about live and artificial light photography: ##1. Artificial Light photography 1. ** Light source selection and characteristics ** - Flash was a commonly used portable artificial light source that could provide strong light in an instant. It was suitable for shooting in low-light environments or filling in shadows, but one had to pay attention to the direction and intensity of the light when using it. - The continuous light was also an artificial light source option. - Soft light boxes are often used to change the characteristics of artificial light. For example, using LED panels and soft light boxes can create softer shadows in still photography. 2. ** Artificial Light Usage Technique ** - Dimmer: When taking photos in a small space (such as a home studio), you can use a dimmer (self-made or buy a lamp with a built-in dimmer) to control the light to adjust the lighting to suit the scene you want to capture. - Observe the size of the light source: a larger light source casts a smaller, weaker shadow. Conversely, a smaller light source casts a clearer shadow. - The use of light regulator: Use light regulator made of white translucent material to adjust the artificial light source. It can make the light emitted by the flash pass through the material to form a new, larger light source, making the light effect more natural. - Consider the distance between the light and the object: the closer the light source is to the object, the brighter it is; the bigger the shadow, the darker it is; the farther away the shadow is, the brighter it is. If you want to take a magnificent photo, you can bring the light closer to the object; if you want a light and natural appearance, you can put the light further away. ##2. Live photography 1. ** Natural light related ** - ** Natural light type and application ** - Prime time (after sunrise and before sunset): The sun has a soft golden-yellow tone, and the light angle is low and soft. It is suitable for taking warm and dreamy photos. - Blue Time (before sunrise and after sunset): The light is cool blue, suitable for shooting quiet and cold scenes. - Noon light: Strong and direct, producing strong contrast and shadows. It is suitable for high-contrast photos, but you must pay attention to avoid overexposed and too hard shadows. - ** Natural Light Shooting Techniques ** - Faint Light: The light source comes from behind the photographer and shines directly on the subject, illuminating the subject evenly. It is suitable for taking photos with rich details (portraits or still life), but the picture may lack layering. - Side light: The light source shines on the main body from the side, creating a clear contrast between light and dark, enhancing the three-dimensional and layered feeling, suitable for expressing texture and contours. - Backlight: The light source comes from behind the subject. It can create a dreamy and translucent effect. You need to pay attention to controlling the exposure to avoid the subject being too dark or the background being too bright. - Bring a reflective board: When the sun is shining, if you take a photo, you can use a clip to fix the reflective board to a tree or building (if there is no reflective board, you can use a white shirt or white cloth instead) to reflect the light to the object. - Make the model face the light: When shooting a portrait with natural light, making the model face the light can create a soft image. Backlighting or backlighting (when the light is strong) can also produce a similar effect. - Wearing a hood outside: It helps to block unwanted sunlight in the image and reduce lighting noise. - Shooting in RAW format: More customizations can be provided during post-shooting to avoid losing image information due to shadows or excessive light. 2. ** Mixed Light (Live light may include a mixture of natural light and artificial light in the existing environment) - Mixed light shooting was challenging, such as when bright sunlight shone through the window and artificial light was overhead. However, he could use some techniques to deal with it, but the reference materials did not mention these techniques in detail. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Principles of Revenge
Here are some principles for recommending revenge novels: 1. [Death Scripture: This is an absolutely dark story of revenge. The story is filled with a dark atmosphere from the beginning to the end.] 2. " Abandoned Wife Reborn, Di Daughter Fighting at the House Gate ": This was a novel about rebirth and revenge. It told the story of the female protagonist's struggle with the house gate after her rebirth. 3. " The Vengeance ": This is a revenge novel, telling the story of the heroine returning in blood and settling the grievances of the past. 4. " A Reborn Daughter Is a Top Student ": This was a revenge novel. The female protagonist used her top student ability and wisdom to take revenge and met a domineering CEO who doted on her to the bone. 5. The Count of Monte Cristo: This is a long novel with revenge as the central clue. It tells the story of the Count of Monte Cristo punishing evil, repaying kindness and taking revenge. These novels all involved the plot of revenge and could be read according to personal preferences.
Principles of Cultivation
The principles of cultivation involved many aspects. First of all, from the perspective of consciousness, human consciousness is divided into unconscious, subconscious, and consciousness, namely the eighth consciousness, Alaya consciousness, the seventh consciousness, and the sixth consciousness. The eighth consciousness, Alaya consciousness, had the function of collecting and remembering. It would collect information about all external things, and this information would affect one's cognition and behavior. The seventh consciousness was related to the sense of self and would affect one's consciousness. From the perspective of life patterns, there was no accident in life. Everything was inevitable. Life situations were projected by life patterns, just like how film determined images. And cultivation was to adjust the life pattern of this bottom level to change the circumstances of life. In terms of specific cultivation methods such as chanting scriptures, one was to understand the wisdom of Buddha and the meaning of cultivation through the scriptures. The second was to use the form of chanting scriptures to control one's mind, change one's state of mind, and correct one's delusional mind. The purpose of cultivation methods such as chanting Buddha or Sanhuohua was to become Buddha. The chanting of the Buddha's name was a path of cultivation. It was a combination of self-cultivation and cultivation of other forces. For example," like a mother remembering her son, like a son remembering her mother ", the Buddha would chant to all living beings, and all living beings would chant to remember the Buddha. Then, they would definitely see the Buddha and become a Buddha. When the Buddha's name was mentioned, all the troubles would naturally be stopped. In addition, cultivation also involved the cultivation of one's nature. For example, by reducing unnecessary social interaction, getting close to nature, trying static activities such as calligraphy, meditation, yoga, learning the wisdom of traditional Chinese culture, and paying attention to health preservation, one could achieve inner peace and calmness, reduce troubles, and improve concentration, thus achieving the purpose of cultivation. "Who told him to cultivate!" The novel is equally exciting. Everyone is welcome to click and read it!
Primitive principles
The primitive principle was the jungle principle. Under this principle, personal interests came first, showing the characteristics of strong meat and weak food. The novel " Primitive Law " is equally exciting. Everyone is welcome to click and read it!
Computer Principles
Computer principles covered many aspects: ** 1. Basic operation mode of the computer ** 1. ** The three steps of hardware input, calculation, and output ** - Computer hardware was made up of a large number of integrated circuits (IPs), and the pins of the IPs were used for input and output. The normal operation of a computer required three steps: input, operation, and output. First of all, the computer itself could not generate information and needed external data (input). Second, the computer had to process and calculate the input data (operation), which was its core value. Finally, the processed data had to be displayed (output) so that the user could know the result. These three steps were closely linked and were indispensable. 2. ** The Essence of Software-A Collection of Orders and Data ** - The essence of a program was a collection of instructions and data, and it had nothing to do with the complexity of the program. An instruction was a command that controlled the computer to input, calculate, and output. The data in the program is divided into input data that is the object of instruction execution and output data that is obtained from the result of instruction execution. For example, in a personal computer, the content of an executable program file with the.Exe extension was a list of values. Each value was either an instruction or data. 3. ** The difference between computer processing and human thinking habits ** - The computer used numbers to represent all information, which was different from human thinking habits. For example, humans used "blue" and "red" to describe colors, while computers used numbers. For example,"0,0,255" represented blue, and "255,0,0" represented red. The computer would first convert the text into the corresponding numbers (character codes) before processing. ** 2. Computer structure composition ** 1. ** Internal and External Storage ** - The internal and external memory was a component that realized the memory function. It was used to store the calculation program and various data involved in the calculation. 2. **CPU structure and functions ** - ** Arithmetic Unit **: It is composed of an arithmetic logic unit, ALU, general purpose register, and data temporary register. The program status word register accepts the commands of the controller and performs actions. It is responsible for the processing and processing of data, namely the arithmetic and logic operations of data. - ** Controller **: Composed of program counter PC, instruction register AR, address register AR, data register Dr, instruction translator, etc. It is responsible for analyzing the control information specified by the program, controlling and coordinating input and output operations or memory access. - ** Register Group **: The register function is to store the binary-code. It is composed of flip-flops with storage function. Registers, buffer, and memory were in close proximity to the CPU. The closest to the CPU was the register, then the buffer, and finally the memory. When the CPU operated, it first read the data from the hard disk into the memory, and then read the data that was about to be used into the register. The CPU prioritized reading and writing the register, and then the register exchanged data with the memory. The buffer existed between the register and the memory, because frequently manipulating the same address data in the memory would affect the speed, and the extraction speed from the buffer was much faster than the memory. - ** bus **: It is the common channel for the CPU, memory, input and output devices to transmit information. The components of the host are connected through the bus, and the external devices are connected to the bus through the corresponding interface circuit. ** 3. Concepts related to commands and programs ** 1. ** Command ** - An instruction was the smallest unit of program control for a computer. The collection of all instructions was called the computer's instruction system. 2. ** Program ** - A program is a set of instructions written in a certain language to complete a specific task. ** 4. Concepts related to the finite-state machine ** 1. ** Basic Concepts ** - The finite-state machine (FSM) was also known as the synchronous finite-state machine. All the state jumps were performed under the effect of the clock, and the number of states was limited. Each state represents an event, and going from one event to another is called a state jump or transition. 2. ** Constitution and expression ** - It is composed of a state register group and a combination logic circuit. The state register group has k bits, that is, there are k state register, and the state is encrypted into k bits, which can represent multiple unique states. The input has m bits and the output has n bits. The trigger condition for a state change is the arrival of the rising edge of the Clock signal. According to whether the output is related to the input conditions, it can be divided into Moore state machines (the output of the combination logic only depends on the current state and has nothing to do with the input state) and Mealy-type state machines (the output depends not only on the current state but also on the input state). "A Short History of the Future: Legends of the Intelligent Era" was equally exciting. Everyone was welcome to click and read it!
Zi photography photography
According to the reference materials, Zi photography was located at the intersection of Huanghai 2nd Road and Haibin 2nd Road, Shijiu Street, Donggang District. It served customers with high-end custom-made products. There was also a mention of Hua Hua, the technical director of Zui Tang Feng of A Lai Se Group, but there was no more detailed information about Zi photography's special photography style, field of expertise, or other related businesses. Therefore, he could not accurately answer the specific situation of Zi photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>