Pre-laid anti-sticky self-adhered waterproof membrane in Dalian City
The pre-laid anti-stick self-adhered waterproof membrane was sold in the Dalian City. For example, the price of the reinforced waterproof membrane of the pre-laid anti-stick self-adhered inner layer of the thermo-plastic polyene was 23.0 yuan, and the price of the reinforced P-type anti-root puncture pre-laid self-adhered walkway board was 18.0 yuan. These pre-laid anti-sticky self-adhered waterproof membrane coiled materials had some characteristics. For example, when the pre-laid anti-sticky method was used for construction, the coiled material was directly laid on the base layer with the sticky layer facing upward, and the concrete was directly poured on the surface of the coiled material. After the concrete was cured, it formed a complete and continuous bond with the sticky layer. The self-glue was used as a transition layer between the self-waterproof main structure and the sheet, achieving a very strong bond effect and effectively preventing water from flowing. The waterproof protective layer could not be set up to reduce the cost. The pre-laid anti-sticking method was adopted to reduce the damage of the waterproof layer caused by the base layer's distortion or settlement. The requirements for operating conditions were low, and there was no need for leveling or drying. The site environment and weather conditions would not affect the construction, and the construction period would be guaranteed. It was green, environmental friendly, and safe. The scope of application includes basement floor, basement side wall, subway, tunnel and other engineering parts that may cause external waterproof tearing due to geological activities. It is also especially suitable for waterproof projects where open flames are prohibited and the base is difficult to dry. Read more exciting novels for free
Code for construction of pre-laid anti-sticking waterproof membrane
The construction specifications of the pre-laid anti-sticking waterproof membrane are as follows: ##I. Pre-construction preparation 1. ** Grass-roots Requirements ** - The construction could be carried out when the strength of the base concrete cushion reached the standard of people. - The surface of the base layer should be clean and basically flat without obvious protruding parts. - The Yin and Yang corners need to be painted into a circular arc. - During construction, there is no clear water on the base surface, and the accumulated water can be removed before construction. 2. ** Material preparation ** - Make sure that the pre-laid anti-sticky waterproof membrane (such as the high-molecular self-adhered waterproof membrane) meets the requirements, such as the national standard 1.2mm reaction sand non-asphalt high-molecular self-adhered waterproof membrane (pre-laid) waterproof membrane. ##2. Construction process 1. ** Grass-roots cleaning ** - The base layer should be solid, flat, without clear water and debris. The stones and dust on the surface of the base layer were cleaned up. 2. ** Reinforcement of nodes (such as trenches, ponding platforms, bearing platforms, post-pouring belts, etc.)** - Sticking the reinforcement layer by wet laying method. - The isolating film was pasted on both sides of the coiled material, and the additional coiled material was pasted on the joints after the plain cement paste was applied, and the isolating film was torn off after the joints were rolled tightly. 3. ** Rolls laid ** - The control line for laying the coiled material shall be set on the base layer, and the coiled material shall be laid on the base layer facing the control line. Except for the reinforced parts and nodes, the isolating film shall be kept. - The lapping width of the long and short sides of the adjacent coiled materials shall be 100mm, and the deviation shall not be greater than 10mm. The isolation film of the lapping area shall be removed before the lapping, and it shall be pressed tightly after the laying to ensure that there are no bubbles, folds and warps. - For the lapping of the long side, correct the first coiled material, and then lap the two coiled materials according to the lapping guide line. The width shall not be less than 80mm and shall not exceed the lapping guide line. When lapping, remove the isolation film at the lapping area to ensure that it is clean, dry and dust-free. Then use a roller to squeeze out the bubbles. First, the short sides were glued together, then the isolation film was torn off and the long sides were overlapped. - For short edge lapping, the short edges of two adjacent materials shall be bonded together to form a complete and continuous waterproof layer with a width of 160mm. - For T-type lapping, the T-type joint shall be sealed with a single-sided self-adhered tape (cover strip) with a diameter of about 80mm. - Facade laying: - Dry the base surface: Remove the isolation film on the surface of the double-sided self-adhered tape, directly stick the tape on the base surface, and then remove the isolation film on the other side of the tape to bond the coiled material. - Slightly wet the base surface: directly fix the tape on the base surface, and then remove the isolation film on the other side of the tape to bond the coiled material. - Moist base: Nail the cement to the edge of the reserved lapping edge of the coiled material and fix it on the base surface. The next coiled material shall be overlapped to cover it. 4. ** Yin-Yang Corner node processing ** - According to the specific situation of the yin and yang corners, it should be handled according to the corresponding specifications and design requirements. 5. ** Stake head node processing ** - After the cement-based infiltration crystallization is dried, the coiled material is laid, and the pile head is dried and coated with sealing paste. 6. ** Exterior wall joint processing (side wall and base plate lapping, etc.)** - According to the materials used for the outer wall (such as self-adhered asphalt, asphalt, etc.), the corresponding bottom plate lapping treatment shall be carried out. ##3. Repair Damage 1. ** The surface of the coiled material has damage points such as steel bar jabs ** - Use a marker to mark the reinforcement repair parts, and use a steel wire brush to remove the loose particles on the surface of the coiled material. - The sand cover strip was cut into a shape without sharp edges (round, rounded, rectangular, square, etc.) and covered on the reinforcement repair part. The isolating film was torn off and pressed with a roller. 2. ** When the sand cover strip cannot completely cover the damaged point ** - The anti-sticking layer on the sand surface needs to be removed in advance before the double-sided tape can be adhered (the hot melt shovel can be pre-heated and the glue layer can be removed with the shovel). - The size of the patch should meet the requirement that there should be a complete lap of more than 100mm outside the damaged perimeter. It can be cut into a circle, oval, or rectangular or square shape with rounded corners. - Use double-sided tape to completely adhere the patch to the coiled material (roll compression), and finally use a sand-faced tape to completely cover the seams around the patch (roll compression). ##IV. Construction Notice 1. During vertical and horizontal transportation of steel bars, handle them gently. Temporary protective measures such as wooden boards shall be used at the hanging points of steel bars to prevent the steel bars from piercing the coiled materials and mechanical damage caused by the steel bars being dragged directly on the coiled materials. 2. First, remove the isolation film of the first layer of the coiled material, then use glue to dry paste the waterproof coiled material. When laying, stagger more than one-third of the width. 3. Finally, he tore off the isolation film outside the roll, sprinkled cement powder on it, and swept it evenly with a broom to avoid sticking to his feet. 4. After the completion of the construction, self-inspection, acceptance, and protection of the finished product were carried out. Then, the subsequent processes such as binding the steel bars and pouring the concrete were carried out. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Construction plan and process of pre-laid reaction glue film waterproof roll
The construction plan and process of the pre-laid high molecular self-adhered waterproof membrane are as follows: ** I. Construction preparation ** 1. Check whether the site has the paving conditions and require the workmanship to be complete. 2. Check the specifications and models of the incoming materials. The packaging and appearance must be intact. It is strictly forbidden to use damaged packaging materials. 3. Check whether the tools needed for paving are complete and in good condition. 4. According to the drawings and the actual situation on the spot, the overall effect of the entire paving was considered, and possible contradictions were resolved in advance. ** 2. Basic-level treatment ** 1. The maintenance of the base layer must meet the requirements of the design and specifications. Before the construction of the waterproof project, the quality of the previous project must be checked and accepted. The construction can only be carried out after it is qualified. 2. All kinds of pre-buried pipe fitting shall be pre-buried according to the design and specifications, and sealed. 3. The surface of the base layer was clean and basically flat without obvious protruding parts. 4. The internal and external corners of the base surface shall be painted into a circular arc shape. The minimum radius of the internal corner shall be 50mm, and the minimum radius of the external corner shall be 20mm. 5. During construction, there was no clear water on the base surface, so the construction could be carried out after the accumulated water was swept away. ** 3. Construction process ** Base cleaning → waterproof treatment of pile head → paving coiled material → coiling material lapping → organizing acceptance → binding steel bars, pouring concrete, and constructing subsequent structural layers. ** IV. Construction precautions ** 1. The waterproof layer shall be constructed with cold work. Open fire shall not be used after the materials enter the working face. In case of sparks caused by the welding of steel bars, temporary protective measures shall be set up on the coiled material surface at the welding place. 2. Pay attention to the follow-up protection after the coiled material is laid. The steel cage should be placed lightly to avoid dragging on the waterproof layer and damaging it. 3. The short-side joints of two adjacent rows of coiled materials should be staggered by more than 300mm to prevent the overlapping of multi-layer joints, causing the coiled materials to be pasted unevenly. 4. The construction area shall be protected by necessary and eye-catching measures and provide necessary passages. Unrelated personnel are prohibited from walking and trampling. 5. During the process of binding the steel bars, if a crowbar is used, a wooden backing plate should be placed under it for temporary protection to avoid damaging the waterproof layer. 6. During the subsequent construction of the waterproof layer, if the waterproof layer is accidentally damaged, it should be repaired in time. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What if the self-adhered bag is too big?
If the self-adhered bag was too big, it could be cut to fit the size of the novel. When cutting, it was basically five centimeters wider than the edge of the book. It could be used as long as it was cut straight. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Sunlight room self-adhered aluminum foil reflective film
Self-contained lens membrane shell s16
I'm not sure about the specific situation of the " one-piece shell with lens film S16 " that you mentioned. It looks like a one-piece shell with lens film for the S16 model phone, but you can tell me more about this one-piece shell, such as its material, color, characteristics, or experience. Then I can recommend it according to your requirements. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Xiaohei Mountain, Dalian City
Xiaohei Mountain was located in Shihe Street, Jinzhou District, and was a famous scenic spot in the northern part of Jinzhou District. The main peak of the Little Black Mountain was 469.1 meters above sea level. The mountain was towering and steep, especially in the east and south. There were dense jungles, deep streams, and rugged paths here, forming a unique natural landscape. If you came to Xiaohei Mountain in mid-late April or early May, you could enjoy the blooming wild azalea flowers, which were red all over the mountains. In addition, there were also some strange stone caves on the mountain, such as Bandao Well, Big Turtle Stone, Cloud Mist Cave, and General Platform. Xiaohei Mountain was also one of the most important water conservation areas in Dalian City. In general, the Little Black Mountain in Dalian City was a scenic spot worth visiting.
Self-help tour of the tourist guide in Dalian
The following is a self-help tour guide for the city of Dalian: ** I. Pre-departure preparations ** 1. Sunscreen products: Dalian ultraviolet-rays, you need to prepare sunscreen-type items. Note that the sunscreen-type spray exceeds 100ml and the bottle is marked as flammable and explosive. Do not take it on the plane. 2. Transportation APP: Before taking the subway, download the " e-Travel of Dalian subway ", and download the " E-Travel " for public transportation. 3. Clothes: Prepare comfortable sneakers for walking. If you go to the zoo or other places, remember to bring insect repellent. ** 2. Transportation ** 1. Self-driving tour was not recommended because there were too many people on the road, especially during the morning and evening rush hour. You could leave the car at the hotel and take the subway and bus to play. 2. If you take a plane, you can take the bus and subway. Line 2 of the subway can be transferred to Line 1 at Xi'an Road. If you leave from the railway station, it is located in the urban area. Line 2 of the subway can be transferred to Line 1 at Xi'an Road. Line 3 of the subway can go to Jinshitan in Jinzhou Development Zone. The bus is also very convenient. There is also the Qingniwa business district, snack street, scenic spots, parks, hotels, etc.; From the North Station of Dalian, you can take Line 1 of the subway and transfer to Line 2 at Xi'an Road. The bus is also more convenient. ** 3. Tour Route ** 1. ** First day ** - Xinghai Square: The largest seaside square in Asia. It is a famous landmark building in Dalian. The buildings are spectacular, and there are beautiful seascapes and charming night scenes. You can feed seagulls and watch the Xinghai Bridge on the square. The tour time is 1 - 2 hours, and the tickets are free. If you want to see seagulls, you can bring your own ham sausages. Pay attention to the way you throw food to avoid being pecked. - ** Xinghai Park **: Beside Xinghai Square, the environment is beautiful. You can enjoy the sea breeze and listen to the waves. The tour time is 1 - 2 hours. The ticket is free. - ** Dalian Shengya Ocean World **: The location is good but the venue is small. You can get close to small animals and watch animal performances. 2. ** The next day ** - ** Fu Village **: A good place to see the sea. - ** Binhai Road **: The scenery along the way is beautiful, with the sea and trees, but the journey is long. It is not recommended to walk. You can drive or rent a car and park at a convenient place to watch. - Fisherman's Wharf: There are many fishing boats and seagulls, as well as a lighthouse. You can buy seafood at a reasonable price on the beach next to it. - ** Bangchui Island **: The island is blue, green, and clear. The sea and sky are the same color. The water quality is good, and there is a cobblestone beach. - ** Venice Water City **: The night view is beautiful. If there are too many people during the day and you don't want to take a boat, you can go at night. It's economical and suitable for taking photos. 3. ** The third day ** - ** Golden Pebble Beach **: This is a full beach, suitable for tourists who are looking for beach fun. You can also go to the Kingdom of Discovering. ** IV. Scenic spots recommendations ** 1. ** Lotus Mountain Park **: Overlooking the panoramic view of Dalian, free tickets. 2. ** The Forest Zoological Garden in Dalian **: Large scale, many animals, and even giant pandas. There is a Ferris wheel in the park. It is recommended to take a ride in the evening to enjoy the scenery and watch the sunset. 3. ** Tiger Beach Ocean Park **: It's close to the mountains and the sea. There are a large number of rare marine creatures. There are a total of 5 venues. You can visit them in the order of Coral Pavilion, Polar Pavilion, Joyful Theater, Sea Beast Pavilion, and Bird's Whispering Forest. The tour time is 3 - 5 hours. The entrance fee is 220 yuan. It's a good place for parents and children to play. ** 5. Delicacy recommendations ** 1. Discovered the Kingdom's Hot Squid. 2. Lingzhi girl, oyster rice noodles. 3. Zhang Huijian smoked meat pancake. 4. Roast chicken in the Four Clouds Pavilion. ** 6. Points to note ** 1. You must eat the seafood in Dalian, but don't eat too much from the first time you go. It may cause you to be acclimatized. 2. Don't buy squid and other food near the train station. The quality is not good and the price is expensive. 3. Don't take photos with cartoon characters at any place. They have to be charged. 4. You can take photos on the Russian style street, but it is not recommended to buy things. 5. Xi'an Road Commercial Street is not recommended. The facilities are old and the traffic is chaotic. 6. Don't go to the place recommended by the driver to eat, lest you get scammed. 7. In terms of diet, seafood should be cooked thoroughly, avoid gluttony, and avoid eating with vitamins C, foods containing aconic acid, and beer. 8. If you go to Xinghai Square, don't drive there. It's hard to find a parking space. If someone was promoting hotel accommodations, ignore them. The environment was usually bad. 9. You can try the streetcar once when you come to Dalian. You need to prepare change. Dalian is the only city in the country that has never stopped using the streetcar.
What is 'sticky a self love story' about?
Since the title is rather ambiguous, 'sticky a self love story' could mean a variety of things. It might be a narrative where the concept of self - love is intertwined with something that is tenacious or difficult to detach from. For example, it could be a story about a person who has had a difficult past and is trying to love themselves. The 'sticky' part could be the remnants of the past that keep creeping into their self - love journey, but they gradually learn to embrace themselves fully despite these obstacles.
Green city, bright moon Dalian
There are projects related to Green City in Dalian, such as Green City·Mingyue Tinglan, which is selling ordinary residential houses, commercial and residential apartments, residential shops, etc. On December 14,2023, the reference average price is 25000 yuan/square meter. The house type has 85 - 128 square meters of 2/3 bedrooms. The surrounding facilities are relatively complete. There are many subway stations, bus stations, kindergarten, primary school, middle school, first-class and above hospitals within 3km. There was also Greentown·Bright Moon on the Sea, which was located in the C-shaped super bay core and limestone mine EOD ecological habitat. It provided a living experience in the form of a TOD ecological swimming pool residential area. It was built into a low-density bungalow courtyard with a maximum floor space of about 60 meters. The layout was "one axis, three views, four gardens". It had a double-storey main entrance hall, a high-end school at 4:30 pm, a unit entrance hall, an underground entrance hall, and other carefully designed spaces. It was also equipped with an endless open-air swimming pool. The multi-functional park could meet the needs of all ages. For example, there was a themed children's activity area, a plastic jogging track, various fitness equipment, and professional sports venues.
Self-driving tour strategy of Xiaohei Mountain in Dalian
Dalian Mountain was a tourist destination suitable for self-driving trips. There were a few self-driving routes to choose from. One of the routes started from the Dalian City and took the Shenhai highway, then the Yanshang highway, and then the road to Xiaoheishan Forest Park. The other route was to enter Minzheng Street from Dalian, then turn right into Huanghe Street, and finally go along the northeast expressway to Xiaohei Mountain. According to the search results, there were no tickets for the Little Black Mountain Forest Park and it was open all day. In addition, it also mentioned the weather forecast and some scenic spots of the Little Black Mountain. However, the search results did not provide detailed self-driving travel guides, such as scenic spots, parking information, and so on. Therefore, for more detailed self-driving travel strategies, he needed to further search or consult relevant tourism resources.