Space Station Model Making Manual
The following are some of the ways to make a space station model by hand: 1. ** Print and produce using a PDF-file (using the Tiangong space station model as an example)**: Alfonso X Moreno of Argentina made a model of China's Tiangong space station. The 1:100 replica model's PDF-file (including the "Tianhe" core module and the "Tianzhou-2" cargo spacecraft part, and more will be listed in the future) can be downloaded for free on their website. After downloading, the design drawings can be printed out for cutting and assembling, but the design drawings are more complicated. 2. ** Made of PVP pipe (Using the Ask the Heavens experiment module as an example)**: - Prepare materials such as PVP pipes (large water pipes are used to make the cabin part with a diameter of 4.2 meters, such as 40 water pipes for the interface), thick packaging boxes, conical paper hats, 502 glue, etc. - The Sky-Seeking experiment module had three sections: the resource module, the airlock module, and the work module. During production, the interface could be fixed by cutting out a ring from a thick box and then putting on a conical paper hat as a transition surface. The airlock module was made in a similar way. Note that it had a square experimental platform and one piece was missing (the hatch for the astronauts). Since the resource module needed to be installed with solar wings (the actual solar wings were about 56 meters wide, and it was difficult to control the structure), some self-made devices could be used to make it sturdy and easy to disassemble. The outer shell of the working cabin could be sliced with a water pipe. After drilling, the hollowed-out shape would be dug out with a utility knife. The hole of the extra-cabin experiment platform would also need to be drilled and repaired. The hatch, various small accessories (such as the charger, attitude adjustment propeller, relay antenna, and extra-cabin handrail) would be installed. Finally, the aerospace logo and flag would be attached and the solar wing module would be installed. 3. ** Made with common materials (Take beverage bottles as an example)**: - Like Wang Yin, a primary school science teacher, he used common materials such as beverage bottles, bamboo sticks, plastic cards, and small wooden blocks. These materials were glued together like building blocks. They could be made according to the concept map of China's space station. The various cabins of the model could also be taken down and connected. During production, they could consult information to assist. 4. ** Made from mineral water bottles, cardboard, etc. **: - The cabin was made by wrapping a mineral water bottle with aluminum foil, and the bottle mouth was wrapped with a blue sticker a few times. - Cut the blue cardboard into a rectangular card of a specific size, and use a silver acryl marker to draw the lines of the solar panel to make the solar panel. - He inserted a bamboo stick into the hole in the cabin and painted it silver. Then, he used double-sided tape to stick the solar panel and the bamboo stick together. - The old toy gun parts were painted with silver self-paint, and the three manufactured cabins were fixed on the old toy gun parts with 502 glue and pasted with a flag sticker. - The top and bottom of the large mineral water bucket were cut off and glued together with double-sided tape. Then, they were wrapped with aluminum foil to make the lunar base. Finally, the space station module was placed on the lunar base and glued with glue and blue sticker. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Aerospace model making manual tutorial
The following are some aerospace model making manuals: ** 1. Rocket Model Making Guide ** 1. ** Material preparation **: - Rocket models might use simple materials such as cardboard, paper tubes, tape, watercolor pens, plasticine, etc.(refer to the materials in Jingxin community activities), or waste materials such as beverage bottles and cardboard. 2. ** Production Steps **: - ** Method 1 (Use beverage bottles and cardboard)** - The first step was to design the blueprint of the space shuttle model equipment cabin. - The second step was to design the size and drawings of the four wings of the space shuttle. - The third step was to design the blueprint of the space shuttle's tail cabin. - The fourth step was to cut out the various parts of the space shuttle according to the drawings. - The fifth step was to assemble the various parts of the space shuttle. The space shuttle model was completed with beverage bottles and cardboard. - ** Method 2 (cardboard, paper roll, etc.)** - According to the shape and structure of the rocket, the main shape of the rocket was cut out from the cardboard, such as the conical head and the cylindrical body part. The paper tube could be used as the main structural part of the rocket. - Using tape, he stuck the cut cardboard in the appropriate position of the paper tube and assembled it into the shape of a rocket. - You could use a watercolor pen to paint the rocket, or you could use plasticine to make small parts, such as the rocket's windows, thrusters, etc., and paste them on the rocket to add details. - ** Method 3 (Use bottles to make rockets)** - He prepared the necessary tools, cut off a part of the bottle, and drew a semicircle with a radius of about ten centimeters on the cardboard. - After that, he stuck the cardboard into a cone shape and applied a circle of glue on the mouth of the bottle to stick the cone. - Cut a rectangular shape according to the circumference of the bottle and stick it on the bottle. - Cut three ladders, stick the double-sided tape, and fold the double-sided tape to stick it on the bottle; - Finally, he cut three circles and stuck them on the bottle. The handmade rocket was completed. ** 2. Satellite model making tutorial (Take a satellite model that turns with light as an example)** 1. ** Material preparation **: - Generally, the production materials would be provided in a complete set, which might include a motor, solar panels, etc. There would also be a live video, graphic instructions, and other auxiliary materials. 2. ** Production Steps **: - First, fix the motor; - Then install solar panels; - According to the tutorial to complete the installation of other components, the child can exercise his hands and brain skills during the assembly process. He can also learn physics knowledge, understand the basic composition and working principle of solar energy, and finally complete the production of the satellite model, which can be used as a decoration. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
China space station model picture
At present, the content of the Tiangong Space Station was available from the video released by the China Aerospace Science and Technology Corporation, but no specific pictures were found. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou spaceship model manual
The model of the Shenzhou spaceship could be made by hand using a variety of simple materials. For example, a paper tube, a straw, white paper, a ruler, a pencil, scissors, double-sided tape, colored pens, and other tools could be used to make a model of the Shenzhou-12 manned spacecraft. The manufacturing steps included drawing specific patterns on white paper.(1 big circle, 4 small circles, 1 national flag) and cut it out. The pen should be light, and the handwriting should be light enough to be seen clearly. Then, paint the corresponding color on the pattern, make the rectangular paper into a cylinder as the main body of the spacecraft, cut out two radiuses from the circle (note not to cut), make it into a cone, and fit it to the size of the cylinder as the top of the spacecraft. Then, add a long strip to the big cone. You could also wrap the paper bucket with paper, wrap it with a blue ribbon at both ends, draw a mark with a red pen, fold the paper into a cylinder and glue it together. You could also wrap the Sprite bottle with paper, wrap it with a blue ribbon, and then put the folded and glued paper cylinder together. In some activities, students could use cardboard, paper tubes, tape, watercolor pens, plasticine, and other materials to make aerospace models. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Pure manual transmission model recommendation
Here are a few recommended pure manual transmission models: 1. The Toyota 86 was a model jointly developed by Toyota and Subaru. It used a pure manual transmission. It had an active driving style and was suitable for drivers who liked drifting and tail flicking. 2. Ford Focus RV: As the most powerful Focus model, the Focus RV was equipped with a 2.3T engine, which produced 350 horsepower and 440 Newton. It was equipped with a six-speed manual transmission, a high-performance manual transmission. 3. Sagitar: The Sagitar was a model launched by the Volkswagen, equipped with a 1.2T turbine engine. The manual transmission version was excellent in terms of space and comfort. It was a manual transmission model suitable for family use. 4. Polo: The Polo was a Volkswagen model with a 1.5L naturally aspirated engine and a five-speed manual transmission. It had German genes and provided a pure manual driving experience. It should be noted that the above recommended models may only be a part of it. If you need more choices, it is recommended to consult professionals or refer to other reliable sources of car information.
Spaceship model making
There were several ways to make a spaceship model: 1. ** Self-made "Shenzhou 12 Manned Spaceship" model ** - Tools: Paper tube, straw, white paper, ruler, pencil, scissors, double-sided tape, colored pens. - Production steps: - Using a piece of white paper, draw a big circle, four small circles, and a flag. Cut them out (when drawing with a pencil, the pen should be light and the handwriting should be shallow. It's good that it can be seen clearly, especially the flag), and then paint the corresponding colors. - He made the rectangular shape into a cylinder (as the main body of the spaceship), cut the circle into two radiuses (be careful not to cut it), and made it into a cone shape. He had to fit the size of the cylinder (as the top of the spaceship), and add a long strip to the big cone. 2. Using old cardboard boxes to make a space station model (Take Liu Jin, a 27-year-old boy from Yangji Town, Xiayi County, Shangqiu City, Henan Province, as an example): You can use old cardboard boxes to make a space station model, such as a 4-meter-long, 2.5-meter-wide, 1-meter-high space station model. Children can participate in the whole process. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Rocket Model Making
The following are the key points for making a rocket model: ** 1. Initial preparations ** 1. ** Understanding Rocket Engine ** - The diameter of the rocket engine had to be specified because a suitable "engine cylinder" had to be set on the rocket to ensure that the engine was tightly fitted to the rocket to prevent the engine from passing through the rocket or falling off during the process of pushing the rocket up. During the production process, using a second-hand engine might be a good choice. 2. ** Obtain relevant information and packages ** - If it was the first time he was making a rocket model, looking at the simple rocket set would help him understand the content involved in making it. You can find cheap kits at nearby hobbyist stores, or you can go to the local library to find books on making rockets, such as Van Milligan's Model Rocket Design and Construction and 69 Simple Science Fair Items with Model Rockets (although the actual effect is uncertain, there are recommendations on the website). - Some websites are also helpful. The National Rocket Teachers Association website has a cheap design (paper tiger) and guidance on cheap launch pads.(But it's not detailed enough, you need to think about the construction of the launch pad yourself);NASA's website has a rocket model diagram and a chart of the force acting on the model; Searching for the "Rocket Model Project" can find many websites with plans or model rocket diagrams, but be aware that some websites that use tissue rolls, PVP tubes, and other materials to make rockets may have unsafe suggestions (such as putting fireworks in the rocket tube, fixing the engine with tape, etc.). ** 2. Material sample (Take one situation as an example)** - The production materials could include cardboard, white cardboard, cotton, small roll cores, colored paper and paper strips, bottle caps with the same inner diameter as the roll cores (cardboard scissors could also be used), paint and brushes, scissors, double-sided tape, woodworking glue, hook pens, etc. ** 3. Production process (Take a specific model as an example)** - Since there were no detailed general production steps, based on some common ideas, the design of the main structure of the rocket must first be determined according to the rocket engine, such as embedding the engine cylinder into the main body of the rocket (such as a rocket launcher made of cardboard and other materials). - According to the design, use the corresponding materials to assemble, such as double-sided tape or woodworking glue to stick the parts, and use scissors to cut the materials of the appropriate shape. If a multi-stage rocket model was made, most of the time, the two engines would be placed next to each other or attached with something. The hot air from the explosive material on the top of the first-stage engine would hit the bottom of the second-stage engine and ignite it. When the second-stage engine ignited, the first-stage engine would be pushed back to the ground (this was a relatively simple way to ignite the second-stage engine without complicated internal electronics). You can also buy a multi-stage rocket kit to learn how it works and get inspiration for its production. - As for the exterior decoration of the rocket, it could be drawn or pasted with colored paper and paper, paint, and brushes. It could also add components such as duck wings (for stable flight) and parachutes (for landing). ** 4. Points to note ** - Making a rocket model may be dangerous and you have to bear the risk yourself. If you want to launch anything higher than a small rocket model with an approved engine or a small bottle rocket, you need to get permission (but you don't know the specific operation and restrictions, you need to ask further). When launching a rocket of your own design, check if it is balanced and follow the relevant safety code (such as the NAR safety code). The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Space Station
There were some science fiction novels about the space station that could be recommended. For example," Visit the Stars " was a Chinese science fiction story inspired by the space station. In addition, EVE: The First Space Station was also a novel about a space station. It told the story of a person building and playing games in the interstellar era. However, the other search results didn't mention any novel recommendations about the space station.
Manual of Making Bamboo Man
The method to make a bamboo man was as follows: First, prepare the materials, including the brush rod or thick straw, thread, small saw, drill, and pen. After that, he sawed the brush rod or straw into a section for the head and body, and then sawed it into eight sections for the limbs. He made a hole on one side of his body to pass through his arm. Next, he used the thread to tie the four limbs together. The order was left arm, left leg, right leg, and right arm. Finally, he put on makeup for the bamboo person. He put on the nose, eyes, eyebrows, and mouth. After making it, one could insert the bamboo man's thread into the seams of the table, pull the thread to make the bamboo man move, or let two bamboo men fight. If he wanted to add weapons to the bamboo people, he could prepare crochet needles, popsicle sticks, and so on.
Making a small globe model
Here are some ways to make a model of a globe: - ** Basic Material Production Method ** - ** Hemispheric mold plaster method **: First, use a hemisphere mold and pour the mixed plaster material into it. He then held the mold and shook it evenly. This required a certain amount of arm strength and patience. Because the plaster solidified faster, shaking it evenly could make the model smoother. After the plaster was completely removed, the first half of the globe was completed. As the first layer of the globe was relatively fragile, in order to increase its toughness, a layer of plaster mixed with paper could be added. After it was fully formed, half of the Earth was removed from the mold by pumping air, and the other half was made in the same way. Finally, he used glue to perfectly bond the two halves, and then polished them. First, he brushed a layer of sealing and damp-proof glue to strengthen the ball, and then he used a fine cloth to polish it by hand, especially the connecting parts of the halves. When cutting the pattern, divide the sticker into 12 pieces. After applying glue on the globe sticker, scrape the surface flat and scrape off the excess glue. After it was completely pasted, a layer of lacquer was sprayed on the surface to prevent water from forming. Then, the base was installed, and the globe was completed. - [Simple Material Making Method: You can use small objects in your life, such as a wire and a ping pong ball, to make a simple globe model after drawing. You can also use foam, sea balls, plasticine, and other materials to simulate and make the Earth. On this basis, you can mark the latitude and longitude, the North and South Poles, and the continents.] - [Special Material Making Method: If wood is used, epoxy can be poured into it, and it can be used to make a globe vase.]
Weird money-making model
He recommended a few novels. " My Interstellar Industrial Empire." The author was like an eagle spreading its wings. It was a sci-fi interstellar civilization genre. Shi Lei had transmigrated to Mars during the early interstellar era, and he had managed to build a mechanical factory and become an industrial empire. New book seeking support, QQ group 523304758 can give suggestions. " I Transmigrated to Become the Villain of a Female Channel's Fictions." It was a fantasy about immortals written by the Otaku Hamster. Su Mo dressed up as the villain in the book he had written and wanted to change his fate as the main character. In the middle and late stages, he was super sweet, and his daily life was warm and funny. The author had promised to update the novel normally and have a happy ending. " Road to Money " was an urban life genre created by Zhao Nie. After Fan Wan left home, she struggled alone, showing the dangers of society and the nature of business. " Unlimited Money Swiping System ", the urban lifestyle genre written by Er Fa Liang. Ren Yan had to farm the money system indefinitely. He made money from everything he did. His writing style was funny and humorous. It was a fresh and refined work of a tycoon. Although it was lacking, it looked relaxed. There was also " Transformed Loli NPC." It was a light novel that was written without paying a salary. The main character turned into an NPC and was raised by the players. The writing style was not bad. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>