How about Pinduoduo's photography fill light?
There were a variety of photography fill light to choose from. The price range was wide, and different fill light had different characteristics. For example, the Jiahuacai color photography light was priced at 29.9 yuan and was suitable for mobile phone selfies, live video broadcasts, photography, and DSLR cameras. According to some user feedback, purchasing the fill light in Pinduoduo may encounter problems such as product damage. If someone receives a rotten fill light, although the platform's customer service promised to only refund it, it did not fulfill it. However, there were also fill light could meet the basic needs of photography. In general, the quality and experience of Pinduoduo's fill light varied according to the specific products and merchants. Read more exciting novels for free
How to do photography with Pinduoduo
If it is Pinduoduo panoramic camera, you can set it up as follows: First, open the Pinduoduo panoramic camera APP and select the "settings" option; In the settings page, you can adjust the shooting mode.(For example, panoramic, panoramic + flow of time, panoramic + macro, etc.), shooting quality (high, medium, low three grades), USB (usually set to automatic), white balance (usually set to automatic), exposure compensation (increase can make the picture brighter, reduce can make the picture darker), time shooting (such as setting a delay of 5 seconds to automatically shoot), time-lapse photography (such as taking a photo every 5 seconds), anti-shake (can be turned on to reduce shooting shake) and other parameters. If it was about the camera permission settings of Pinduoduo, he could open the phone settings to enter the privacy option, then select the camera option, and finally open the option behind Pinduoduo. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light for solo photography?
There were many ways to look good in solo photography: - ** Using a Reflecting Device to Replenish Light ** - [Type and Effect of Reflectors: Reflectors are a simple, cheap, and basic way to fill in the light.] For example, there were different types of multi-functional mirrors such as silver, gold, white, and black. The silver surface reflected light and was white, suitable for filling up the light when the sun was strong; the gold surface reflected light and was a warm color, suitable for shooting where the character's skin was warm; the white surface reflected light was weak but soft, which was good for showing the details of the skin; the black surface was a light absorbing plate, which could increase the three-dimensional effect when placed next to the face. The soft light screen could filter the light when the light was hard to make the skin delicate. - ** Usage **: First set the main light to shape and illuminate the subject, determine the ideal exposure setting, evaluate the shadow area caused by the main light, and then place the reflective device roughly opposite the main light source. - ** Use flash or studio flash to fill up the light **: In addition to the main flash, you can use the standard flash or studio flash as the fill light. It was more controllable than a mirror and could fine-tune the exposure and shape of the fill light with greater precision. - ** Use other items to fill in the light **: When there is no professional equipment, you can use white clothes, white cardboard, mirrors, and other daily items to fill in the light. For example, on a cloudy day outdoors, the small white fan in the model's hand could be used to fill in the light on the face. In the dim light indoors, a pure white picture on another mobile phone (the brightness was turned to the maximum) could be used to fill in the light on the upper side of the face to avoid shadows. - ** Choose a suitable shooting position and use natural light to fill in the light **: If you are shooting in a restaurant or coffee shop with dim light, you can choose a position near the window and use the light coming in from outside to fill in the light for the face. If you feel that the light is not enough, you can shoot in a place with better light near the door. When filling in the light, you also need to pay attention to the lighting ratio. The brightness ratio of the main light and the fill light will affect the effect of the picture. Compared to the main light, the fill light is usually under-exposed. A lower lighting ratio will create a low-contrast image, so the shadows are filled up. A higher lighting ratio will produce a higher contrast and more dramatic effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light in outdoor photography
There were several ways to fill in the light for outdoor photography: 1. ** Using natural light sources to supplement the light ** - ** Choose the right time to shoot **: The light in the morning or evening is softer and warmer, and the angle of illumination is low. The shooting effect is good at this time. For example, when taking portrait photos outdoors, the light would be soft from 9:00 a.m. to 10:00 a.m. and 3:00 p.m. to 5:00 p.m., which could reduce problems such as facial shadows. - ** Choose a suitable shooting location **: In a poorly lit environment, such as a restaurant or coffee shop, you can choose to take a photo near the window and use the light coming in from outside to make up for the face. If you feel that the light from the window is not enough, you can walk out of the store and take a photo near the door with better light. 2. ** Using small props to fill up the light ** - ** White Item Illumination **: When there is no professional lighting equipment, you can use white clothes, white cardboard, and other small props to achieve a certain lighting effect. For example, when taking photos outdoors on a cloudy day, the small white fan in the model's hand could be used to fill in the light on the face and brighten the skin color. - ** Reflect light using a mirror **: The mirror can reflect light and direct it to the subject that needs light. - ** Using another mobile phone to fill in the light **: In a dimly lit room, you can download a pure white picture from another mobile phone. Turn the brightness of the mobile phone to the maximum to fill in the light of the face. The angle of the fill light corresponds to the upper side of the face to avoid shadows. 3. ** Use the fill light tool to fill the light ** - ** Reflecting Plate Refill Light **: - [Silver Mask: Extremely reflective, reflecting white light. It is suitable for making up for the shadows when the sunlight is strong.] - ** Gold Face **: High reflective rate, anti-warm color light, suitable for subjects that need the character's skin to appear warm. - ** White Surface **: The reflection is weak, but the light is soft. It can make the character's skin more delicate and show the details of the skin. - ** Light Absorbing Plate (Black Surface)**: When you need to increase the three-dimensional effect of the character, you can place the black surface next to the face to absorb some light. - ** Soft Light Screen **: When the light is very hard, the soft light screen can filter the light and make the light soft, making the skin look delicate. - **LED photography fill light and fill light stick **: These two types are external constant light sources. They are easy to carry. You can adjust the parameters and color temperature. You can see the shooting effect when you place them properly. - ** Flash fill light **: The flash is an external light source. It can be used when there is no sunlight or when the light is not good and needs to fill the light. There were two ways to flash on the top of the machine or off the machine. Off-machine flash was more desirable. When using it, be careful not to directly aim at the face. You can install a soft light cover or adjust the angle of the light to avoid the light being stiff. - ** Zhiyun Power King G60 fill light (Small fill light example)**: Small size (Rubik's cube size), light weight (300g), power up to 60W, enough to meet outdoor shooting needs, high compatibility, can use its own power charger to supply power, also supports up to 100W PD protocol Tyre-C fast charging power supply (can be powered by power bank), also equipped with a patent electronic back pressure cooling system, even if it is lit for a long time, it will not be overheated due to insufficient heat dissipation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light evenly in photography
Here are some ways to achieve uniform fill light in photography: - Use the soft light screen: The soft light screen can filter the light when the light is very hard, so that the light becomes soft, which helps to make the light evenly distributed. For example, when shooting a portrait, the light received by the skin of the character can be more uniform, and the skin condition can be presented delicately. - Choose the right reflective board: The white side of the reflective board is weaker and softer. This soft reflective characteristic is conducive to making the fill light more uniform, making the light on the surface of the character or object look more natural and uniform. - Multi-light source fill light: use multiple light sources to fill light from different angles, adjust the brightness, angle, distance, and other parameters of each light source, so that the light can complement and fuse with each other, avoiding obvious shadows and highlight areas, thus achieving a uniform fill light effect. For example, when shooting badges, while using side backlighting to outline the outline, the front or side light was used to eliminate the overly strong shadows. Through the cooperation of this multi-directional light source, the effect of uniform light was achieved. - Whether it was a flash, a continuous light, or a soft light, the right angle and distance were crucial. For example, keep the flash or other light source at an appropriate distance from the subject and adjust it to a suitable angle to avoid the light being too concentrated in a certain area. This would allow the light to cover the subject more evenly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light for outdoor photography
The following methods can be used for outdoor photography: ** 1. Choose a suitable shooting time ** From 9 to 10 in the morning and from 3 to 5 in the afternoon, the light was soft and warm, and the angle of illumination was low. It was the ideal time for outdoor portraits. ** 2. Use the natural environment to fill in the light ** 1. ** Close to the light source ** - In an open environment with insufficient light (such as cloudy or dimly lit places), if there is a window nearby and there is light in the room, the subject can be close to the window and use the indoor light to fill in the light. If it is in some places with street lamps and other light sources, the subject can also be close to the street lamps and other light sources. 2. ** Looking for reflections ** - Using white building walls, beaches, and other natural reflections to reflect light onto the subject. For example, when shooting near a white building, the light reflected by the white wall could illuminate the shadow of the character. ** 3. Refill the light with the help of the light filling tool ** 1. ** Reflecting Plate Replenish Light ** - Reflective panels had different surfaces such as silver, gold, white, and black (light absorbing panels). The silver surface had a strong reflection, which was suitable for filling up the light when the sun was strong; the gold surface had a high reflection rate and reflected warm light, which was suitable for shooting that needed warm skin; the white surface had a weak but soft reflection, which could make the skin of the character delicate. - When using it, the reflective board should face the light source and adjust the angle so that the reflected light hits the face or body part of the character that needs light. For example, when there was a shadow on the face of a character, the reflective board was adjusted to a suitable angle to allow the reflected light to eliminate the shadow. 2. ** fill light Fill-up Light ** - The LED photography fill light and light stick were external light sources that were constantly bright. They were easy to carry and could adjust the parameters and color temperature. When in use, the direction, angle, brightness, and color temperature of the light can be adjusted according to the needs. For example, the Zhiyun Power King G60 had a power of 60W, small size (the size of a Rubik's cube), light weight (300g), high compatibility, and could supply power in many ways and dissipate heat well. The Luming W100R had a power of 100W, weighed more than 300g, and had a large light-emitting area of 31mm. It had a built-in reflective cover, and the color temperature was adjusted from 2700K to 6500K. It had a flexible power supply method and good heat dissipation effect. It could be used with soft light boxes, soft light covers, and other accessories to improve the shooting effect. - When the flash was used to fill the light, there were two ways to flash it: from the top of the camera or from the camera. The off-camera flash was preferred. It was necessary to avoid directly aiming at the face. A soft light cover could be installed or the angle of the light could be adjusted to prevent the face from being too bright and the light from being too hard. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What fill light good for outdoor photography?
The following are some suitable fill light for outdoor photography: - Tucuang's 100W fill light: This is an outdoor fill light with dual color temperature and built-in battery. It has a built-in 18000 mAh battery and can last up to 60 minutes at full power. - Liadi's fill light stick C2: It's an LED fill light. It's portable and has a maximum illumination of 14200Lux. It's suitable for macro photography and food photography. It can also be used indoors to fill in the light flexibly. It can also meet some shooting needs outdoors. It came with an external light control kit, which could quickly switch between strong light, anti-glare, and soft light. It supported the intelligent light control of the APP. The temperature of cold and warm light could be finely adjusted by 74 levels. There were up to 36000 colors in the full color range. There were also 21 kinds of scene special effects lights built in. - Youlan mini fill light vl49 rmb: It's a small full-color fill light that can be placed in your pocket. It's suitable for artistic portraits, light painting photography, product lighting, live broadcast fill light, and other scenes. It has Hsl color mode and provides 359 colors to choose from. It can also be used for outdoor photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light effect for solo photography
The best way to achieve a good effect in solo photography was as follows: ** 1. Use the Reflecting Device to fill in the light ** 1. ** Reflectors 'characteristics ** - This was a simple, cheap, and basic way to fill in the light. It had a wide range of uses. It was a piece of reflective material. If placed carefully, it could reflect the main (key) light back into the shadow, creating a diffuse reflection filling effect. - It was very suitable for beginners in portrait photography. High-quality mirrors were cheap, easy to use, and quick to set up. They only needed to move a little beside the subject. 2. ** Use of different surfaces of the reflective board (Take the 5-in-1 reflective board as an example)** - [Silver Mask]: Extremely reflective, reflecting white light. It is suitable for making up for shadows when the sunlight is strong. - ** Gold Mask **: High reflective rate, reflecting warm light, suitable for shooting subjects that require the skin of the character to appear warm. - [White Face]: The reflection is relatively weak, but the light is soft, which is good for showing the details of the character's skin and making the skin more delicate. - ** Black Face (Light Absorbing Plate)**: When a three-dimensional effect is required, it can be placed next to a human face to absorb some light. - ** Soft Light Screen **: When the light is very hard, it can filter the light and make the light soft, achieving the effect of delicate skin. ** 2. Use flash or studio light to fill in the light ** 1. ** Specialties ** - In addition to the main flash, one (or more) standard flashes or studio flashes can be used as fill light. This kind of special fill light was more controllable than a projector. It could fine-tune the exposure and shape of the fill light with precision that the projector couldn't achieve. 2. ** Instance * - Zhiyun's 5x F100 light stick had a unique advantage in portrait photography. In the daytime portrait shooting scene, its 100W high power and high brightness can offset the problem of facial dullness caused by natural backlighting. It can not only keep the background pure and natural, but also clearly shoot the main body. In the dark environment at night, it can brighten up parts and body contours, creating a sharp contrast between the building background and the people. ** 3. Use surrounding objects to fill in the light (non-professional lighting equipment)** 1. ** White objects fill up the light ** - In daily shooting, if you don't have professional light filling equipment, you can use white clothes, white cardboard, and other white objects to fill in the light. For example, on a cloudy day, when the outdoor light was too dark and the face was not white enough, the small white fan in the model's hand could be used to fill in the light on the face to brighten the skin color. 2. ** Phone screen fill light ** - In a dimly lit room, you can download a pure white picture from another mobile phone and turn the brightness of the mobile phone to the maximum to fill the light on the face. The angle of the fill light corresponds to the upper side of the face to avoid ugly shadows on the face. In addition, he also needed to understand the illumination ratio. The brightness ratio of the main light and the fill light would affect the image effect. For example, when the main light was twice as bright as the fill light, the light ratio was 2:1. The higher the light factor, the higher the contrast of the image and the more dramatic it was. The fill light is always under-exposed compared to the main light, but it can create a low-contrast image. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Is it useful to fill in the light for photography? How much is one?
Filming was very useful in photography. In the process of photography, light was a key factor, and fill light could make up for the lack of natural light or adjust the lighting effect according to the photographer's creative needs. For example, when shooting portraits, fill light could reduce the shadow of the face, making the skin color of the character look more natural and the facial features more three-dimensional; when shooting still life, it could highlight the details and texture of the object; when shooting videos, it could make the picture clearer and brighter. The price of the fill light for photography varied greatly. There were cheaper ones, such as the Shenniu LED36 camera video fill light, which cost 80 yuan; the Reima YB-RH510 mobile phone camera equipment fill light, which cost 299 yuan; the Beiyang LED49 live broadcast equipment fill light, which cost 58 yuan, etc. There were also medium-priced ones, such as Fengke's MCL60R (suitable for mobile phones, cameras, and video cameras), which cost 1199 yuan, and Luming's MCL100X hand-held fill light, which cost 1199 yuan. There were also more expensive fill lights, such as the 20,000-yuan Aitux 1200x fill light. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill light for outdoor photography during the day
When outdoor photography is done during the day, you can consider the following types of fill light: - Tucuang 100W fill light: This is a dual-color temperature built-in battery fill light. It has a built-in 18000 mAh battery and can last up to 60 minutes at full power. - Some of the more portable and high-performance fill lights, such as the Hobolite Mini fill light, had a power of 20W and a brightness of up to 1600 Lumens. It could be infinitely adjusted from 0 - 100% and could also be adjusted at 25%. The color temperature could be infinitely adjusted from 2700 to 6500K, and the color rendering index was as high as 96+. It came with a color temperature filter, which helped to restore white balance and create an atmosphere during photography. It could also create a variety of supplementary light scenes through the light barrier, honeycomb board, soft autumn cover, and four-color filter in the kit. There were also a variety of control methods, which made it easy to operate and had good battery life. The battery capacity of 3000mAh could be used for more than an hour under 50% brightness. It also supported fast charging and could be used while charging. When using the fill light for outdoor photography during the day, the parameters of the fill light (such as brightness, color temperature, etc.) should be flexibly adjusted according to the actual shooting scene (such as the subject, light direction and intensity, etc.) and the shooting requirements (such as the desired light and shadow effect, etc.). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to fill in the light for studio photography to make it look better?
To achieve a good effect in studio photography, you can start from the following aspects: ** I. Use of different types of lights ** 1. ** Support light (fill light)** - Its function was to supplement the lighting of the shadows and make them lighter. You can use the same soft light box as the main light, and control the light ratio with the main light by adjusting the illumination distance or output power. For example, if the fill light's exposure was 3 apertures less than the main light, the light ratio would be 1:3, and the shadow would be darker; if the fill light's intensity was close to the main light (about half an aperture difference), the shadow would be very light. 2. [Backlight] - It was used to brighten the background and give the picture a sense of space. When the subject was far away from the background and the background was dark, a background light was needed to distinguish the subject from the background. However, factors such as the color of the background, distance, and lighting angle must be taken into account. Sometimes, two lights may be needed to evenly illuminate the seamless background. 3. ** Contour Light ** - The light coming from the back of the subject. It could isolate the main body and the back of the same color, increase the details of the hair, and make the subject's head have a beautiful outline against the dark background, separating it from the background. When using it, be careful not to let it shine on the main body's nose, lest the nose looks abnormal. 4. ** Glow ** - The hair was polished to make it shiny and three-dimensional. The light source was located behind the main body and could outline the shape and layering of the main body. 5. ** Light in my eyes ** - The light on the eyeball could brighten the eyes by reflecting light, making the eyes more lively. ** 2. Selection and use of light filling equipment ** 1. ** Soft Light Box ** - Modern film studios often used soft light boxes as the main light. The light they emitted was more uniform and easy to control. It was to put one or several light bulbs into the box and illuminate the subject through a soft light box cover (usually made of plastic or textile) that could scatter light. The larger the box, the more light bulbs, the stronger the power, and the wider the illumination range. 2. ** Reflecting Plate ** - Reflectors were also commonly used light replenishment equipment. There were five-in-one reflective panels on the market, which were easy to carry. There was also a white foam board (rice pineapple), which had a good reflective effect and was soft, but it was inconvenient to carry around. When choosing a reflective board, don't just look for cheap, choose a good fabric. The white reflective board had a high reflective rate, and the golden reflective color was a warm color, suitable for topics that required the character's skin to be warm. 3. ** Other substitutes ** - When there was no soft board, a piece of white paper could also soften the light and soften the shadows. White walls and white cloth were also good choices, and they were easy to fold. ** 3. Lighting method example-Rembrandt lighting method (supplementary lighting in the classic lighting method)** - The main light source lit up half of the character's face, forming a shadow on the protruding part of the character's nose and across the cheek. Through the shadow of the brow bone, a triangular bright area was formed at the angle of the nose and eyes. At the same time, there was an auxiliary light source that increased the brightness of the dark parts from another direction. The main light source is usually high, causing the shadow of the nose to have a downward trend to form a beautiful triangular bright area. The brightness of the main light source was usually four or eight times that of the auxiliary light source, forming a contrast between light and dark. This lighting method usually used a dark background to highlight the contrast between light and dark. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>