Shenzhou spacecraft model picture structure introduction
The Shenzhou spacecraft used a three-compartment structure, consisting of an orbital module, a return module, and a propulsion module, as well as additional sections. The orbital module was located at the front of the spacecraft and was the living area of the astronauts. It was equipped with various on-orbit support equipment, including some measurement sensors for rendezvous and docking. The return capsule was located in the middle of the spacecraft. It was a sealed structure with a bell-shaped blunt inverted cone. It was where the astronauts 'main living space and life support system were located. The astronauts were located in the return capsule during the launch, rendezvous, and return phases. The propulsion module was located at the bottom of the spacecraft, providing power for the spacecraft. There was a pair of solar panels on the wall that could rotate like wings. There were also four engines at the bottom for attitude control, orbital change, and braking. The Shenzhou spacecraft was nearly nine meters long and weighed about eight tons. It had three passengers and six cubic meters of free space for astronauts. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou 15 spacecraft model
There was a Shenzhou-15 manned spaceship building block model. It was a China aerospace toy satellite model that was suitable as a boy's gift. The selling price was 115 yuan, with a minimum of two pieces. The place of origin was China, and the brand was Qimeng. The item number was 10219. The material was plastic/plastic (ABS plastic). It was a small particle building block with a number of 400 - 800 pieces. The net weight of the building block was 1.5kg. It was suitable for teenagers aged 7 - 14 years old. It was supplied by Yiwu City's Qing 'er E-Commerce. The courier fee was 3 yuan. The delivery would be arranged within 2 days after payment was successful. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
The structure diagram of the Shenzhou spacecraft
The Shenzhou spacecraft used a three-module structure, consisting of a return module, an orbital module, a propulsion module, and an additional section. In the three-module structure, the orbital module was located at the front of the spacecraft, the return module was located in the middle of the spacecraft, and the propulsion module was located at the bottom of the spacecraft. The return capsule was a sealed structure with a bell-shaped blunt inverted cone. It provided the astronauts with the main living space and life support system. The astronauts were in the return capsule during the launch, rendezvous, docking, and return phases. The propulsion module provided power for the spacecraft. On the wall of the module was a pair of rotating solar panels that looked like wings. There were also four engines at the bottom for attitude control, orbital change, and braking. As for the additional section, the data did not give more detailed information about its specific location relationship with other sections. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou-13 spacecraft model design
The Shenzhou spacecraft had a three-module structure, which consisted of a return module, an orbital module, a propulsion module, and an additional section. The main structure of Shenzhou-13 was composed of an orbital module, a return module, and a propulsion module. The return module was in the middle of the three-module plan. However, there was no exact information about the specific design details of the Shenzhou-13 spacecraft model. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou-10 spacecraft launch rocket model
The Shenzhou-10 spacecraft was launched by a modified Long March 2F launch vehicle. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou spacecraft or Shenzhou spacecraft
The correct name was Shenzhou spacecraft, not Shenzhou spacecraft. The Shenzhou spacecraft was a manned spacecraft developed by China to transport people and materials to and from the world. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Introduction to the launch process of the Shenzhou-14 spacecraft
At 10:44 on June 5,2022, the Long March 2 F-Yao-14 launch vehicle ignited and launched the Shenzhou 14 manned spacecraft at the Jiuquan Satellite Launch Center. After the rocket was ignited, it rose from the ground. Instead of flying vertically, it turned by gravity and flew into outer space. During this process, it experienced the separation of the thrusters, the separation of the first and second stages, the throwing of the fairing, the opening of the sun by the arrow, and the opening of the solar panels. About 577 seconds later, the Shenzhou 14 manned spacecraft successfully separated from the rocket and entered the predetermined orbit. The flight crew was in good condition and the launch was a complete success. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Shenzhou 18 spacecraft
Shenzhou 18 was the 18th spacecraft launched by China's manned space program. It was successfully launched at Jiuquan Satellite Launch Center at 20:59 on April 25,2024. The combination of the Shenzhou 18 spacecraft and the Long March 2F Yao 18 launch vehicle had a total weight of more than 400 tons and a total height of nearly 60 meters. The spacecraft was made up of three astronauts, Ye Guangfu, Li Cong, and Li Guangsu. They would stay in the space station for about six months, during which they would perform tasks such as space station management, maintenance, and experiments. The Shenzhou 18 spacecraft was equipped with a fault detection system and an escape rescue system to ensure the safety of the astronauts. The spacecraft would perform an autonomous rapid rendezvous and docking with the space station assembly and rotate in orbit with the Shenzhou 17 astronauts. The Shenzhou 18 spacecraft is expected to return in late October this year.
Shenzhou 17 spacecraft
The Shenzhou-17 spacecraft was the second manned spacecraft after the Chinese space station entered a new stage of application and development. It adopted the autonomous rapid rendezvous and docking mode and successfully docked at the forward port of the space station and the core module about 6.5 hours after entering orbit, forming a three-cabin three-ship combination. The mission objectives of Shenzhou 17 included completing the on-orbit rotation with Shenzhou 16, staying for about six months, carrying out space science and application load on-orbit experiments, carrying out astronauts 'extraterrestrial activities and load extraterrestrial activities, and for the first time carrying out extraterrestrial maintenance and installation of extraterrestrial loads. During their stay in orbit, the Shenzhou 17 astronauts would also welcome the Tianzhou 7 cargo spacecraft and the Shenzhou 18 manned spacecraft. He planned to return to Earth around April next year. This mission was the 30th mission since the implementation of China's manned space project, and it was also the 12th manned mission.
Shenzhou spacecraft trajectory
The trajectory of the Shenzhou spacecraft included launching into the predetermined orbit, performing a series of mission operations in space, and gradually decelerating to return to Earth. During the launch phase, the Shenzhou spacecraft was launched from the Jiuquan Satellite Launch Center by the Long March 2F launch vehicle and entered the scheduled orbit. For example, when the Shenzhou 17 manned spacecraft was launched, it successfully separated from the rocket about 10 minutes later and entered the predetermined orbit. During the space mission, the spacecraft would fly around the Earth. For example, Shenzhou 17 would fly around the Earth during the space mission. Astronauts would conduct space experiments and equipment maintenance in space. During the return process, the spacecraft needed to gradually reduce its speed to zero. Taking Shenzhou 17 as an example, it used advanced rapid return technology. After leaving the space station, it first flew around the Earth five times, which took about 7.5 hours. During this period, it made several attitude adjustments and reverse rocket braking. Then, by accurately adjusting the re-entry angle and timing, it landed accurately on the scheduled landing site about one and a half hours later. The whole process took about nine hours. "Legend of the Flying Apsaras" is equally exciting. Everyone is welcome to click and read it!
Shenzhou spacecraft album
There were many types of Shenzhou Spaceship Commemorative Booklets that were related to different Shenzhou Spaceship missions. For example, Shenzhou V had a precious souvenir book, and Shenzhou 14 had two versions of the manned flight mission souvenir book. One version contained a refined identification armband, a number of souvenir stamps, and a postcard with an astronaut's portrait. The other version did not have an identification armband but a metal souvenir badge. Some of these albums were popular and had a lot of pre-orders. Some were even given to others as gifts. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!