How to set the parameters of the black card camera

The following is a comparison of the parameters of some black card cameras: - ** Black Card 1**: Made in 2012. It has a 1-inch sensor with 20.2 million pixels. The wide-angle aperture is F1.8. It has good sensitivity for dark light shooting, but it doesn't have a flip screen. It's not suitable for multi-angle shooting (can't take selfies). The body doesn't support Wifi connection to the phone, so it's inconvenient to transfer photos. - ** RX10 (first generation)**: released on October 16, 2013, about 20.2 million pixel-based back-illuminated LCD. F2.8 constant aperture, 24 - 200mm equivalent focal length anti-shake lens; closest focusing distance W (wide-angle end):3cm / T (telephoto end): 30cm; equivalent magnifying power W:0.45x / T:0.38x;7-blade aperture, built-in 3-stop ND lens, driven by DDSSM motor; support 1080 60p 50mps video capture;3.5mm audio input/output; dust-proof and splash-proof body. - ** RX100M3 **: It is equipped with an equivalent 24 - 70mm f/1.8 - 2.8 lens, a pop-up EVF viewfinder, and the camera screen can be flipped up 180 degrees. It used a 1-inch Exmor R back-illuminated LCD sensor with an effective resolution of 20.1 million. The sensitivity range was from 125 to 25600. The new Bionz X processor greatly improved the image processing speed, with a continuous shooting speed of 10 frames per second and 1080p video recording. The new lens had a built-in ND filter. It had a built-in pop-up 1.44-million-pel EVF electronic viewfinder. The flash was moved to the middle of the top of the camera, and the hot shoes were removed. The back of the camera was a 3-inch 1.23-million-pel foldable LCD screen, which could be used for self-timer functions. - ** RX10M2 **: Released on June 10, 2015, upgraded to about 20.2 million pixel-stacked LCD. Support up to 1/32000 second low-distortion electronic shutter and 14FPS high-speed continuous shooting; Support 4K 30p 100Mbps video capture (full sample); Support S-Log2; Support 1000fps HFF video capture; Upgrade to 2.36 million point OLED viewfinder, larger LCD screen folding angle; Support USB power supply. - ** RX10M3 **: released on March 29, 2016, replaced with an anti-shake lens with an equivalent focal length of 24 - 600mm and an aperture of F2.8 - 4. The closest focusing distance W:3cm / T: 72cm; the equivalent magnifying power W:0.42x / T:0.49x;9-blade aperture, 4.5-stop anti-shake effect (removed built-in ND); provides a zoom ring, a focus ring, and a focus hold button. - ** RX10M4 **: released on September 12, 2017, upgraded to a 315-point phase detector. After the upgrade, it supports real-time eye AFs and animal eye AFs, continuous focus and continuous shooting at up to 24FPS, focus distance limit switch, touch focus and sliding focus point, recording longer HFF high-frame-rate videos, and S-Log3. - ** Black card RX100 sixth generation **: released in June 2018. The image processor has a higher speed, improved image resolution, reduced noise, and achieved more accurate facial and eye-controlled AF-tracking performance. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The parameters of the camera memory card were mainly as follows: 1. ** Memory Card Type **: - **SD card **: The most common, used by most cameras and card machines. It was featured by a write protection switch. When it was dialed, the file could only be read but not written. When it was dialed up, the protection could be removed and the copy file could be written. - **TF card (Micro-SD card)**: Usage scenarios include drones, sports cameras, panoramic cameras, driving cameras, etc. - ** CFast card **: Very rare. Only some high-end micro-cameras support it. It has the highest transmission speed and performance. There are three types: Type A, Type B, and Type C. Currently, the most commonly used card on the market is Type B. 2. ** Memory card capacity **: There are usually 32, 64, 128, 256, 512, etc., and there are also 2G to 2T of different capacity. For ordinary photography users, the mainstream SD card is recommended to choose 64 or 128GB capacity (128GB is the best choice for frequently shooting Vlogs or videos). 32GB is not cost-effective, and 256GB is expensive. For professional photographers or those with sufficient budget, you can choose a larger capacity as needed. 3. Speed parameters: - ** Read and Write Speed **: Memory cards have two speeds, read and write. The write speed directly affects the continuous shooting experience and video recording. The read speed is usually faster than the write speed. In the early days, it was marked with Class level, but now it was commonly seen as Class 10 (C10), which was faster. Later, the Uhs standard became popular, with U1 (minimum write speed of 10mb/s) and U3 (minimum write speed of 30mb/s) indicating the minimum write speed. The maximum reading speed of the UHS-I card was 104MB/s, the UHS-II card was 312MB/s, and the UHS-III card was 624MB/s. If there was a need for continuous shooting, it was recommended to buy a card with a write speed of 150mb/s or more; if there was a need for video shooting, at least buy a U3 card. - ** Speed of different types of cards **: The theoretical maximum speed of a normal UHC-I SD card is 104mb/S, and the theoretical maximum speed of a compact flash card is 167mb/s (1100x). For example, Leksha's 2000X SD card could read 300mb/s and write 260mb/s, while Tianshuo's 256GB XKD card could read 1850mb/s and write 1400mb/s. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The following are some of the parameters of the Casio camera: ** 1. Basic parameters ** 1. ** White Balance **: Choose the corresponding white balance mode according to the shooting environment to ensure the color of the photo is accurate. 2. ** exposure **: adjust the exposure value according to the light intensity and the brightness of the subject to ensure that the brightness of the photo is moderate. 3. ** Focus **: adjust the focus mode and focus point according to the position and distance of the subject to ensure that the photo is clear. ** 2. Adjusting the parameters in different shooting scenes ** 1. ** Portrait or background blurring effect required (such as close-up of flowers, etc.)** - Aperture: You can set a larger aperture (the f-value is smaller, such as f/1.8 - f/2.8). This way, you can shoot a blurred background and highlight the main body. The depth of field under the large aperture was shallow, and the background blur was obvious. - Shutter speed: If you shoot a static character, it can be more than 1/100s; if the character has some movements, it can be increased to 1/200s. A fast shutter speed could make the shooting of moving characters clearer, while a slow speed could easily cause drag. - [Light sensitivity: 100 - 400 to ensure the clarity of the image.] The higher the IQ, the more noise the camera would have, and the more sensitive the camera would be to light. 2. ** Scenery Shooting ** - Aperture: It is recommended to set a small aperture (a large f-value), such as F8 or above, so that you can shoot a large scene. - Shutter speed: It depends on the light. When shooting with a hand-held camera, the shutter speed should not be lower than 1/80s. Otherwise, the photo may be blurred. If a tripod was used, the shutter speed could be adjusted according to the actual light and the desired effect. - <strong></strong> 3. ** Night Scene Shooting ** - Aperture: Can be set to F8, a small aperture can shoot starlight. - Shutter speed: Due to the dim light, a longer shutter speed may be required, such as 3s - 5s (when shooting fireworks). Use a tripod to prevent blurring. - "Light sensitivity: Pay attention to control it. If it's too high, it will affect the image quality. Generally, it should not exceed 6400. In addition, some of the scene modes of the Casio camera (such as automatic) would automatically adjust the parameters according to the surrounding environment. There were also some cameras that had HVR mode, which could be used to take more balanced photos in high-contrast scenes. Some Casio cameras had a variety of built-in filter, which could make the photos more vivid. After shooting, the camera could also adjust the color saturation, contrast, and other parameters of the photo to achieve better results through the camera's built-in color adjustment function. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

There was a " professional mode " in the photo function of WeChat. After clicking on this mode, the camera parameters could be adjusted. For example, the CPU represented the camera's sensitivity, the shutter speed determined the exposure time, and the aperture affected the amount of light entering the camera. When the light is dim, the value of the light sensitivity can be increased by increasing the value of the light sensitivity; when the light is strong, the value of the light sensitivity can be reduced to avoid overexposed. Shooting sports scenes requires a fast shutter speed to capture the moment; shooting scenery requires a large aperture to obtain a beautiful depth of field effect. In addition, the " White Balance " in " Professional Mode " could adjust the color balance, the " contrast " could adjust the contrast between light and dark, and the " Saturation " could adjust the color brightness. At the same time, when sending photos to WeChat friends, you can press and hold the word [album] in the [+] sign at the bottom right corner of the chat interface to open the phone's own camera to change the shooting parameters. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

Here are some of the Canon camera's parameters: ** 1. Photo-style related parameters ** 1. ** Enter the photo style settings ** - He clicked on the menu in the camera dashboard, then swiped to the second option to find the photo style. 2. ** System Preset ** - After clicking Set, there were default options such as standard and portrait. The sharpness and other parameters of the portrait were different from the standard plan. For example, the sharpness of the portrait was lower than the standard plan. 3. ** Self Setting ** - If he wanted to adjust it himself, he could click on info in one of the default programs and enter the independent settings to adjust the sharpness, saturation, and other parameters. - In terms of sharpness, it was not necessary to set the sharpness too high when shooting portraits in order to make the skin look soft, but it could be set higher when shooting products. - In terms of saturation, the scenery could be brighter. If the skin color of the person was too bright, it might be uncomfortable. It needed to be adjusted according to the actual situation. - In terms of color tone (color temperature), cold colors were more suitable for shooting in winter and rainy days (such as setting the white balance to about 4500K to shoot fresh photos), and warm colors were suitable for sunny days and spring and autumn. ** 2. Iso-related parameters ** You could register an 800-degree setting first, then register the camera parameters. This way, when you usually use the 100-degree setting in the A range, when you suddenly want to use the 800-degree setting, you just need to switch the wave wheel to the C range, and it will immediately become 800. It was more convenient than switching manually. ** 3. Reflecting Plate Pre-lift-related parameters ** You can set the pre-lift of the reflective board to switch at any time. When the reflective board was pre-raised, the stability of the hand-held shooting was improved. The hand-held shooting could reach a shutter speed of 1/8 second without blurring, and the squatting shooting could reach a shutter speed of 1/4 second. If it was troublesome to switch this setting through the Fn menu, it could be set to C to facilitate the operation. This setting might be often used when sweeping the streets at night. ** 4. Color temperature setting (Some mid-range and above)** 1. After selecting the shooting mode, he clicked on the shortcut setting button to enter the setting interface and select the white balance setting. 2. He entered the white balance setting interface and switched to the K mode. 3. He clicked to enter K mode, where he could set a detailed color temperature value and switch the color temperature through the dial wheel. ** 5. Shooting mode related parameters ** 1. ** Audition mode (suitable for small fresh shooting)** - When taking fresh photos, you can use the AR mode and add a bit of exposure compensation (slightly overexposed), but you have to pay attention to the safety shutter. At the same time, he used a large aperture to blur the background, but he had to pay attention to the problem of anti-shake. 2. **M (suitable for still life shooting)** - When shooting still objects, it was recommended to set the gear to M, and then adjust the parameters such as the shutter, aperture, and so on according to the brightness you wanted. The larger the aperture (the smaller the F value), the more obvious the blurring effect caused by the distinction between the front and back scenes. This feature could be used to create. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

If it was a scene of pedestrians fogging up in the market: - For mobile phone users who use the "Pedestrian Fog" function, the default shooting time is 4 seconds. However, in order to obtain pedestrians with a smear effect, it is recommended to switch to "B" to manually control the start and end of the shutter. The normal shooting time is about 2 seconds. During the process, hold the phone with both hands and keep it stable. If you want to get a more continuous and natural fogging effect through low-speed and slow-door shooting, you can turn on the professional mode during the day and set the USB to the lowest. The shutter time is set to 1/20 second, but the photo will be slightly brighter. As long as it is not exposed, you can adjust the exposure later. If it is still overexposed, you can choose 2x or 5x telephoto shooting to lower the exposure. - If it was a close-up shot of a person in the market, there was no specific mention of the camera's parameters. It was more about the composition and shooting techniques, such as using "over-shoulder shots" and "low-angle shots". In the background selection, attention should be paid to avoid the messy background elements. - As for market photography as a whole, the reference materials did not give a unified camera setting for market photography. However, some general setting principles for general scenery photography and people photography could be referred to. For example, if you want to set the USB to a lower value to ensure the quality of the image, you can set the focus point to 1/3 of the image if there is no clear subject in the picture. If you don't want to have a clear tone style display, the camera's white balance color temperature can be set to automatic. Otherwise, set the white balance according to the desired tone style and use the white balance drift to achieve the best tone effect. If you use a tripod to shoot steadily, the shutter speed can be flexibly adjusted according to the actual situation. If you hold the camera, you should pay attention to the safety shutter speed to prevent the camera from blurring. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

If you want the camera to shoot with a small aperture (large f-value), the following are some examples of camera parameters for different scenes: ** 1. Scenery Shooting ** 1. ** Focus and Metering ** - During the day, it would focus automatically, and at night, it would focus manually. - For Metering, choose the center-emphasized Metering option. 2. ** Aperture, Shutter, and USB ** - Try to choose F8, F9, F11 and other small apertures. The shutter speed was determined by the subject. For example, the "silky feeling" of the waves might require a shutter speed of 20 seconds or even longer. When taking photos at night, the USB should be adjusted according to the light of the scene. The common parameters for shooting stars were aperture F2.8, shutter 25s, USB 1000 - 3200, and the rest of the time, it was best to ensure that the USB was between 100 - 800. ** 2. Multiple portraits (such as group photos)** 1. ** Focus and Metering ** - With autofocus, you can choose to focus on the center or spot. 2. ** Aperture, focal length, etc ** - The aperture could be set to a small aperture of F8 or above to ensure that everyone's face was clear. If it was an environmental portrait, to ensure that both the model and the background were captured, a smaller aperture such as F2.8 or F4 could be used. The focal length could be selected at the wide-angle end of 24mm or 35mm. ** 3. Still Life Shooting (Take Delicacies as an example)** 1. ** The camera lens and shooting angle ** - Generally, a macro lens (such as 60 micro, 100 micro) or a common large aperture circle focal lens (such as 50mmF1.4) could be used for overhead shots. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The camera settings for capturing night scenes are as follows: 1. ** Aperture **: - In order to ensure the depth of field (front and back clear), you can choose a small aperture, the recommended aperture number is F8 - F13. If you want to shoot the starlight effect, the smaller the aperture, the better. However, if the aperture is too small, it will affect the quality of the image, and the small aperture is easy to cause the phenomenon of refraction. The best aperture is generally F8 - F11. In some cases, the aperture could even reach F16 or above for the "starlight" effect. If the aperture priority mode was used, it was generally necessary to shoot at F5.6 (the index value was larger and the aperture was smaller) to get a larger depth of field. 2. ** Iso-sensitivity **: - Generally, it was set to the original minimum sensitivity, such as 100 or 200 (the minimum sensitivity of different cameras was different). If the sensitivity was too high, it was easy to produce noise. During long exposure times, to ensure the quality of the shot, try to use a low value of the USB. In theory, the lower the USB setting, the better the quality. It could also be flexibly controlled according to the actual shooting scene. 3. ** Shutter (exposure time): - If you use the A-V aperture priority, the camera will automatically measure the light and calculate a reasonable exposure time. For example, when the shooting time was late, the exposure time might be longer, requiring 20 - 30 seconds; when the sky was dark, it might be 5 - 10 seconds. For the first time or if you don't have enough experience, you can take a few more photos and gradually increase the exposure time until you are satisfied with the results. If you hold the camera, you can first open the aperture to the maximum, then set the shutter to the focal length of a second.(For example, if the current focal length is 30mm, set it to 1/30 seconds), and then control the exposure of the photo through the sensitivity. If you use a tripod, you can first set the sensitivity to 100, then reduce the aperture by a few stops, and then set the shutter to control the exposure of the photo. However, the shutter time may be longer. After pressing the shutter, the camera will go black and it will take a few seconds to finish shooting. During this period, do not touch the camera. When shooting at night on the phone, you can choose the highest exposure of 30 seconds, and the time can be selected according to the traffic or light source effect of the shooting environment. 4. ** Compensation for exposure **: - When the camera's light measurement was not accurate or could not meet the requirements, exposure compensation could be used. If it was dark, exposure compensation could be added, and if it was bright, exposure compensation could be reduced. When shooting a city night scene, due to the large difference in the brightness of the scene, in order to obtain more accurate measurement data, you should usually choose the center-focused or spot measurement mode, and then choose the area that is slightly weaker than the brightest area in the picture for measurement. If necessary, reduce the exposure compensation by 0.3 - 1 to show the deep night. 5. ** Focus setting **: - Because it was a night shot, autofocus might not be able to identify the subject, resulting in a failed focus. Therefore, it was recommended to use manual focus. For close-up shots, you could use a strong flashlight to illuminate the subject's focus and then press the camera autofocus button. 6. ** Other settings **: - Prepare a tripod, fix the camera on the tripod, and then turn off the VR setting of the camera (turn it OFF), that is, turn off the anti-shake function. There is no need to turn on the anti-shake function when there is a tripod. If you used the B-door long exposure to shoot night scenes (long exposure usually refers to an exposure time of more than 1 second, generally used for night shooting, light trace photography, water scenery photography, etc.), the camera required the function of the B-door, and must bring a tripod and shutter release to support the camera. For equipment, he could also prepare black cardboard, batteries with sufficient power, flashlights, etc. For portraits, he needed a camera top flash. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The settings for the shooting ratio of the sony camera are as follows: 1. Enter the camera menu: Turn on the camera and press the menu button to enter the camera settings menu. 2. Find the picture settings: In the menu, find the "picture settings" or "picture format" option, usually under the shooting settings or image settings. 3. [Screen ratio selection: There are different screen ratio options in the screen setting menu, such as 16:9, 4:3, 1:1, etc. You can select the desired ratio by scrolling the selection button or pressing the left and right keys.] 4. Confirm settings: After selecting the ratio, find the "Confirm" or "apply" option in the menu, press the capture button or confirm the settings. 5. [Take photos: After confirming the settings, you can exit the menu and take photos according to the set ratio.] Different proportions would affect the composition and cutting of the picture. For example, 16:9 was suitable for shooting scenery, 4:3 was suitable for shooting people or still life, and 1:1 was suitable for shooting square pictures. In addition to selecting the ratio during shooting, you can also cut and adjust the ratio during post-processing, but some picture information may be lost, so it is recommended to determine the ratio setting during shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

For setting the parameters of the Apple camera, you can do the following: First, he opened the phone's "settings" option and entered the "camera" option. In the "camera" settings page, you can set the format (such as "best compatibility"), grid (can be turned on for easy framing), priority shooting (such as lens correction to reduce blur and lens distortion), retain settings (can turn on functions such as camera mode, smart control, exposure adjustment, live photos, etc.), record video (such as 1080P HD, 60fps, etc.), and so on. At the same time, under the "display and text size" option in the "auxiliary functions" in the "settings", he could adjust the "reduce white point value" to 25% and choose "hue" in the "color filter" option. In addition, after turning on the camera, he could also edit and adjust some parameters in the upper left corner, such as exposure. You can also adjust the color tone and other parameters by clicking the relevant icons on the screen in the shooting interface (for example, in the iPhone 16, you can adjust the standard version in the small square in the upper right corner to 22 tones, color- 54, etc.). Moreover, he could pull down the control center and press the brightness adjustment button to turn off the original color display. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>