Night scene parameters of a hand-held DSLR
When shooting night scenes with a hand-held DSLR, the following parameters can be used: 1. ** Light sensitivity (USB)**: Set the sensitivity to auto. If you use a full-frame camera, you can set the sensitivity between 3200 - 6400 in the settings. There is basically no noise within this range. 2. ** Focus mode **: Single-point focus mode is used. The focus point is placed in a bright place. As long as there is light, the camera can focus successfully. 3. ** Shooting Mode **: - Aperture priority mode can be set. The aperture size is determined according to the subject. For example, if you want to blur the background of a person, use a large aperture. If you want to shoot a stationary object at night, use a small aperture (such as F10 or smaller aperture) to ensure the depth of field. - You can also use the shutter priority mode, adjust the shutter speed, and the aperture will be automatically adjusted by the camera. 4. ** exposure compensation **: Check the exposure level on the camera display in real time and adjust the exposure compensation to control the brightness of the image. If the hand shook and the camera was not stable, you could consider using a tripod to assist in shooting; if you were shooting a portrait at night, you needed a low shutter speed (shooting)+ flash (filling light); if you wanted to shoot the night light drag effect, you would use a low shutter speed; if you wanted the starlight effect, you would shrink the aperture + low shutter speed, or add an astral lens. Read more exciting novels for free
Commonly used scene parameters for DSLR cameras
How to set the parameters of the night view DSLR?
The following are some of the parameters for shooting night scenes with a DSLR: 1. ** Light sensitivity (USB) setting **: - It could be directly set to automatic. For full-frame cameras, it could also be set to adjust the range between 3200 - 6400. There was basically no noise within this range. In some cases, such as when the Nikon D850 was shooting night scenes and could not leave the city, the USB could be set to 400 - 800; if you wanted to take special situations such as taking photos of the Milky Way, you needed to increase the USB. However, the higher the IQ, the more noise there would be in the image. If possible, he could use a flash to fill in the light. 2. ** exposure compensation adjustment **: Check the exposure level in real time through the camera display, and then adjust the exposure compensation to control the brightness of the screen. 3. ** Focus mode **: Single-point focus mode is used. The focus point is placed in a place with light. As long as there is light, the camera can focus successfully. 4. ** Shooting Mode and Aperture Shutter Setting **: - ** Aperture priority mode (shooting still objects)**: The aperture size is determined according to the subject. If you want to blur the background, you can use a large aperture. The shutter speed is automatically adjusted by the camera. - ** Shutter priority mode **: After adjusting the shutter speed, the aperture will be automatically adjusted by the camera. - **M (Manual)**: - Night scenes (such as when using a tripod): With an aperture of F8 or above (such as F11), the light will appear as starlight. Pay attention to the safety shutter. If you want to purify the scene and extend the exposure time (such as F22, with an aperture of 10 - 30 seconds), pedestrians can disappear from the picture without leaving a trace. At the same time, you can use a pre-raised reflective plate to reduce the vibration of the machine. - Night portrait shooting: F2.8 - 8, using slow sync flash and rear curtain flash mode. When shooting, you can look for neon lights, street lamps, and other light sources to fill up the light. If it's a night portrait, you can also use a low-speed shutter (shooting)+ flash (filling up the light). - If you want to shoot the night light drag effect, use a low shutter speed; if you want the star effect, you can shrink the aperture + low shutter speed, or add a star lens; delayed exposure requires a tripod and a shutter release. - If you want to take a large picture of the moon, such as occupying most of the photo, when the 500mm focal length is not enough, you can set the camera to APS-C mode (that is, only the middle area of the sensor is used for imaging), which can get the equivalent effect of 750mm focal length. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR English parameters
The following are some common English parameters for DSLR: 1. ** Metering Mode **: It can be divided into Spot Metering, Matrix Metering, and Center -weighed Metering. 2. ** Iso-Mode **: Iso-is the sensitivity (International Standard Organization). The value can be adjusted. 3. ** Shutter Speed Mode **: S represents Shutter Speed. 4. ** Exposure-Value Mode **: Exposure-Value means exposure compensation. 5. ** AF-mode (auto-focus Mode)**: This is the auto-focus mode, which can be divided into active and passive modes. 6. **AWB Mode **: White Balance Mode. 7. Aperture: The English name is Aperture. The F value is often used to indicate the size and is used to control the amount of light entering. 8. ** NEP (RAW)**: An image format, 12-bit or 14-bit, can be compressed or compressed without loss. 9. **JPEG**: Common image format, fine (approx. 1:4), average (approximate. 1:8), basic (approximate. 1:16) compression. 10. DFC (Design Rule for Camera file system): 11. **Exif (Exchangeable Image File Format for Digital Still Cameras)**: Exchangeable image file format (for digital cameras). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR dimming parameters
According to the available information, the dimming parameters of the Silver Swallow SY-28As flash for the Sony-grade single-lens reflex were mentioned. The flash control had two automatic apertures, F2.8 and F5.6, and the flash index was 28 (100, 50mm focal length). However, this was only the dimming parameters of the specific flash. Generally speaking, the dimming of an DSLR camera was related to parameters such as aperture, shutter speed, and sensitivity. The aperture size directly affected the amount of light entering. A large aperture would enter more light, and a small aperture would enter less. A slow shutter speed would allow the light to enter longer, and a fast shutter speed would allow the light to enter shorter. The higher the sensitivity value, the more sensitive the camera was to light. However, high sensitivity might bring about an increase in noise. Under different shooting scenes and needs, these parameters needed to be adjusted to achieve the appropriate dimming effect. For example, when shooting portraits, a larger aperture (such as F1.8 - F5.6) may be used to obtain a shallow depth of field to highlight the main body of the character, but pay attention to the accuracy of the focus to avoid losing details; when shooting scenery, a small aperture (such as F8 - F16) may be used to ensure a larger depth of field to make the whole picture clear. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Basic parameters of DSLR
The following are the basic settings for common DSLR scenes: ** 1. Portrait Shooting ** 1. ** Still Portrait ** - Shooting mode: Aperture priority mode (LV) can be selected, and the aperture is set to a large aperture, such as F2.8 or larger. - Focus: Focus on the person's eyes. - [Light sensitivity: Daytime light sensitivity can be set between 100 - 400.] - [Focus: Use a focal length of 50mm or above.] - [Shooting distance: Depends on full-body, half-body, and headshot.] 2. ** Portrait in motion ** - [Shooting mode: Shutter priority mode (TV), shutter speed set to 1/250s.] ** 2. Scenery Shooting ** 1. ** Ordinary scenery ** - Shooting mode: You can use P or Aperture priority mode, and the aperture is set to F5.6 or smaller. - [Shot: It is recommended to use a wide-angle lens to accommodate more scenery.] - [Light sensitivity: For example, the clear day's light sensitivity can be set to 100, and the cloudy day's light sensitivity can be set to around 400.] - "Picture composition: avoid placing the most attractive scenery in the middle of the picture. You can use the three-point composition, frame composition, symmetrical composition, diagonal composition, white space composition, etc. 2. ** Special parameters (M file) Shooting on a sunny day ** - It had a shutter speed of about 1/200, and a cloudy day with a shutter speed of 400. ** 3. Flower Shooting ** - [Shooting mode: Aperture priority mode (LV)] - "Lenses: You can choose a large aperture lens or a 100-micro lens. The aperture should be large to highlight the main body and make the depth of field shallow, making the picture softer. - [Composing: You can use the central composition or the nine-square composition to place the main body in the center of the picture.] ** 4. Pet Shooting ** 1. ** Method 1 ** - [Shooting mode: P-grade automatic, continuous shooting function activated.] 2. ** Method 2 ** - [Shooting mode: Shutter priority mode (TV). Shutter set at 1/200s or higher.] ** 5. Night Scene Shooting ** - [Shooting mode: Aperture priority mode. Use a small aperture, such as F10 or smaller.] - [Light sensitivity: Normally set to 100.] - Shutter speed: Can be set to 1/30s. - Metering mode: Set it to the evaluation mode (Matrix Metering mode) and reduce the exposure compensation as appropriate. - [Ancestors: With the help of a tripod, you can use the shutter release to shoot.] ** 6. Silhouette Shooting ** - [Shooting Mode: P-file] - Metering: Use spot photography to measure the brightness of the light. Then, add or subtract the exposure according to the actual needs. Place the focus on the bright spot to measure the brightness. The dark part will become a black silhouette. ** 7. Shooting of still small things like flowers, birds, and insects ** - Shooting mode: Aperture priority mode (LV), the aperture is best to be f5.6 or larger. - [Focus: 50mm and above.] - [Shooting distance: Try to shoot within 1 meter, to blur the background.] ** 8. Portrait Shooting at Night ** - [Shooting mode: Aperture priority mode, f8 aperture.] - Light sensitivity: 100 - 400. - "Anciliaries: Use a tripod, set up automatic or custom white balance, and use slow sync flash (the flash flashes once when the shutter is pressed, and flashes again before the end of the exposure. You can't leave when you're shooting). ** 9. Shooting of moving objects ** 1. ** Method 1 ** - When the light is good, use Aperture priority mode (UA). A small aperture below f8 can get a large depth of field; a shallow depth of field can be obtained above f8, and continuous shutter can be selected. 2. ** Method 2 ** - If you want a dynamic effect, use the shutter priority mode (TV), set the shutter to about 1/30, focus, press the shutter, and at the same time, the lens will follow the target at an appropriate speed. In addition, you also need to pay attention to the photo size, format, and image quality settings. In special scenes, you may need to customize the white balance, set the shooting style, choose the appropriate focus mode, and the basic settings such as sensitivity (you can also directly set the sensitivity to the STAR position and let the camera adjust according to the scene) and exposure mode (M, aperture priority, shutter priority). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Huahai DSLR parameters
If you were to use a single-lens reflex camera to shoot the sea of flowers, you would need to consider the following parameters: 1. ** Choice of lens **: If you want to shoot a large area of colorful flowers, you usually need to use a wide-angle lens; if you want to shoot the details of a flower at a close distance, you can use a telephoto lens, and it is best to use a macro lens. This can achieve the ideal definition and make the details of the subject clear, which is not available in ordinary lenses. 2. ** Aperture Setting **: Aperture can be adjusted according to your needs. For example, if you want to blur the background and highlight the main body of the sea of flowers, you can increase the aperture; if you want to make the whole sea of flowers appear clearly, you need to adjust the aperture size according to the actual situation. 3. ** Focus **: If you are shooting a large scene, autofocus is usually fine. However, if you are shooting a close-up close to the flower, autofocus may not work well. You can switch the AF-autofocus on the lens to MTF-manual focus, and then turn the focus ring to focus. 4. ** Photometering **: Generally, you can choose average dimming, which will take into account the exposure of the subject and the background at the same time. However, if the flower is light-colored and the surrounding is dark-colored, using this dimming method may cause the flower bud to be overexposed. In this case, you can use partial dimming or spot dimming. Spot Metering would consider the exposure of the main body and its surroundings, but the main body had a higher weight. Spot Metering only considered the exposure of the main body, and could be applied flexibly according to the actual situation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR macro parameters
The following are some of the key parameters for DSLR macro photography: 1. ** Scene Selection **: - Common macro lenses had focal lengths of 50mm, 60mm, 90mm, 105mm, and 200mm. - Short focal length lenses below 70mm had a shorter focusing distance, suitable for shooting still life details; macro lenses above 100mm were suitable for shooting moving objects such as insects because they could be farther away from the subject and reduce interference;70 - 100mm focal length was between the two, covering both static and dynamic scenes. 2. ** Aperture **: - Unlike daily shooting where a large aperture was used to create a small depth of field, macro photography often chose a smaller aperture, such as F8 - F11, or sometimes even F16, because the depth of field of the macro lens was shallow and the depth of field would decrease when the lens was close to the subject (there was a background blurring effect). However, there were also cases where F2.8 - F4 was used to create a background blurring effect to highlight the main part of the macro. 3. ** Shutter: - When shooting agile objects such as insects, a high shutter speed, such as 1/250, was needed to capture the moment. Moreover, when not using a tripod (it is more troublesome to set up a tripod when taking a photo), the slight shake of the hand will affect the clarity of the macro photography, and a higher shutter speed will help the clarity of the shot. 4. ** Replenishing Light **: - In macro photography, a small aperture (less light per unit of time) and a high shutter (less light per unit of time) were often set. Forcefully raising the IQ would affect the image quality and produce high noise, so it was necessary to fill in the light appropriately. Although it was simple to use a flash, the light was too strong. The contrast and brightness of the object were too obvious. A better method was to choose to use a diffusing device or a miniature reflective plate to fill in the light for the main body. 5. ** Other shooting modes and parameters **: - When shooting small things such as flowers, birds, and insects, you can use the Av file. The aperture is best to be f5.6 or larger, and the focal length is above 50mm. Try to shoot within 1 meter to achieve background blurring. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR exposure parameters
The exposure parameters of an DSLR mainly included the following aspects: 1. ** exposure compensation **: Expressed in the word 'EV', it is an exposure control method to further adjust the brightness of the photo. If the environment is dark (the photo taken is dark), you can increase the exposure value (the scale line on the display screen moves to the right, which is the positive direction), and the photo will be brighter than when the EV is 0; otherwise, it will be darker. 2. ** Flash compensation **: Also indicated by the SUV value. The brightness of the photo can be changed by changing the brightness of the camera's built-in flash. It is generally used to fill in the light for people in portrait photos. 3. ** The three elements of exposure **: - ** Aperture **: Aperture size affects the amount of light entering and depth of field effect. If the aperture was opened wide, the exposure would increase and the background would blur; if the aperture was closed, the exposure would decrease and the background would be clear. For example, if you need a shallow depth of field (background blur) effect for portraits, you can choose an aperture value of f/2.8 or higher. - ** Shutter Speed **: Slow down the shutter speed to increase the exposure, allowing for a slow-motion effect; fast up the shutter speed to reduce the exposure, making it suitable for shooting moving objects. - ** Light sensitivity (USB)**: Increase the sensitivity, increase the exposure, but increase the noise; decrease the sensitivity, reduce the exposure, and improve the image quality. On sunny days, the outdoor CPU can be set to 100 - 400; on cloudy days or indoor natural light, it can be set to 400 - 1600; at night or in low light, it can be set to 1600 or above, depending on the required shutter speed and acceptable noise level. 4. ** Reciprocity Law **: When the exposure is determined, adjust one of the exposure parameters to increase or decrease the exposure. The other two parameters must be adjusted accordingly to reduce or increase the exposure to maintain the same exposure. For example, if the aperture was F4, the shutter speed was 1/60 seconds, and the sensitivity was 800, then if the aperture was increased by 3 stops to F1.4 (the exposure increased by 3 stops), the shutter speed could be increased by 3 stops to 1/500 seconds or the sensitivity could be lowered by 3 stops to 100 to maintain the exposure. 5. ** White Balance (AWB)**: This is the default setting for the white precision generated after changing the three primary colors of red, green, and blue in the environment. AWB is the default setting of the camera. 6. ** Automatic brightness optimization **: The camera automatically processes photos. 7. ** Metering mode **: There are four types of measurement: evaluation, spot, spot, and center weight average. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Various DSLR photo parameters
The following are the parameters of the DSLR photos in different shooting scenes: ** 1. Portrait Shooting ** 1. ** Aperture **: Use an aperture of f5.6 or larger to blur the background and highlight the main character. 2. ** focal length **: 50mm or above. The shooting distance depends on different requirements such as full-body, half-body, and headshot. 3. Focus: Focus on the person's eyes, making the character look more lively. 4. ** Light sensitivity (USB)**: The daytime USB is 100, and the maximum is 400. ** 2. Scenery Shooting ** 1. ** Shooting Mode **: Aperture priority mode (Av). 2. Aperture: You can use an aperture of f8 or smaller to obtain a larger depth of field and ensure the overall clarity of the picture. ** 3. Shooting of still small things such as flowers, birds, and insects ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: F5.6 or higher is best. 3. ** Focus **: 50mm or more. 4. ** Shooting Distance **: Try to shoot within 1 meter to blur the background. ** 4. Night Scene Shooting ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: A small aperture below f8 can create a starlight effect. 3. ** Light sensitivity (USB)**: Within USB 200. 4. ** Shutter Speed **: Slow down the shutter speed and extend the exposure time. This way, the person walking past will disappear from the picture. If you use a hand-held camera, it is recommended to use a tripod or place the camera on a fixed object (such as a stone, stool, etc.) to prevent the image from blurring due to hand shaking. ** 5. Night Portrait Shooting ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: Around f8. 3. ** Light sensitivity (USB)**: USB 100 - 400. 4. ** White Balance **: Sets automatic or custom white balance. 5. ** Flash **: Use slow sync flash (the camera's default night portrait flash mode). The flash will flash once when the shutter is pressed and once again before the exposure ends. The person cannot leave during the shooting. ** 6. Shooting of moving objects ** 1. ** When the light is good ** - [Shooting Mode: Av] - Aperture: A small aperture below f8 can get a large depth of field, and above f8 can get a shallow depth of field. - Shutter: Continuous shutter option. 2. ** When you want a dynamic effect ** - [Shooting Mode: TV] - Shutter: Set it to about 1/30. When you focus and press the shutter, the lens will follow the target at an appropriate speed to create a dynamic effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Sony DSLR lens parameters
The following are some of the parameters related to common Sony-grade DSLR lenses: ** 1. Focus ** 1. ** SonyMDT18 - 135mmF3.5 - 5.6Sam**: The focal length range is 18 - 135mm. 2. ** PE PZ 28 - 135mm F4G OSS**: focal length 28 - 135mm. 3. ** ESF-S 18 - 200**: The focal length range is 18 - 200mm. 4. ** Sony70 - 400mm F4 - 5.6G SSM**: The focal length range is 70 - 400mm. 5. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: The focal length range is 24 - 240mm. 6. ** SonyFE24 - 70mmF2.8GM**: The focal length is 24 - 70mm. 7. ** SonyFE24 - 105mmF4 **: The focal length range is 24 - 105mm. ** 2. Maximum aperture ** 1. ** SonyMD18 - 135mm F3.5 - 5.6Sam**: It is a floating aperture lens, and the maximum aperture changes between F3.5 - 5.6. 2. ** PE PZ 28 - 135mm F4G OSS**: A constant aperture lens with a maximum aperture of F4. 3. ** ESF-S18 - 200**: The maximum aperture is F2.8. 4. ** Sony70 - 400mm F4 - 5.6G SSM**: It is a floating aperture lens, and the maximum aperture varies between F4 - 5.6. 5. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: It is a floating aperture lens, and the maximum aperture changes between F3.5 - 6.3. ** 3. Identification and characteristics of the lens type ** 1. ** PE **: E-mount full-frame lens, suitable for all E-mount devices. 2. **E**: E-mount APS-C frame lens, can be installed on all E-mount devices, but when paired with a full-frame camera, there will be frame trimming by default (only the central part of the CPU is used). If the image is not trimmed, there will usually be obvious halation or black blocking. 3. **G**: Inherited from Minolta's high-end lens logo, most of them have nano-coating. 4. **ZA**: A lens product jointly developed by Sony and Zeiss. The lens body and packaging have the double logo of Sony and Zeiss, all with T* coating. The lens may also have the words representing the lens structure (such as Warrio-Tessar, Planer, Distagon, Sonnar, etc.). There is no new product since July 2016. 5. GM (G-Master or "G-Master"): It was the highest-end lens product line from Sony, and all of them were nano-coated. ** 4. Other characteristics ** 1. ** PE PZ 28 - 135mm F4G OSS**: It has a power zoom function, which can provide smooth angle conversion and anti-shake function. 2. ** ESF-S18 - 200**: Automatic focus and anti-shake support. 3. ** Sony70 - 400mmF4 - 5.6G SSM**: It has SSM (ultrasonic motor), which is good for autofocus operation. 4. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: With OSS (optical image stabilization system). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>