What are the parameters to pay attention to when choosing a DSLR?
The following are some of the parameters that you need to pay attention to when choosing an DSLR: 1. ** Focus mode related parameters **: For example, AF-ON focus mode setting parameters. A good focus mode setting function can easily switch between single-shot focus, autofocus, and servo-autofocus, which helps to accurately focus on the subject. 2. ** Depth-of-field button related parameters **: If this button can be easily set to a photo style (such as portrait or landscape shooting style), you can use this button to quickly adjust the shooting style when shooting different subjects, which is more practical. 3. ** Multi-function button (M-GN) related parameters **: If you can set M-GN to drive mode, focus mode, white balance, light measurement mode and other functions, and you can easily switch these settings during the shooting process, it will increase the convenience and flexibility of shooting. 4. ** Image confirmation related parameters **: For example, the setting of the time for the photo to stay on the camera to check the effect of the shot after the shot (generally, it can be selected as 2 seconds). A suitable image confirmation time can help you quickly check the shooting effect and adjust the shooting strategy. 5. ** Light sensitivity (USB) parameters **: includes the minimum and maximum values that can be set. The maximum value corresponding to the best imaging effect that the equipment itself could withstand was an important reference, because the noise of the photo would increase if the value was exceeded. A reasonable sensitivity range could adapt to the needs of shooting in different lighting environments. 6. ** Lens-aberrations correction related parameters **: The parameters related to peripheral brightness correction, distortion correction, and digital lens optimization are very important. For example, the peripheral light correction could reduce dark corners, the distortion correction could be turned on, and the digital lens optimization selection criteria could help improve the image quality. 7. ** High Iso-noise reduction function parameters **: In dark environments, the high Iso-noise reduction function can adjust the brightness of the screen, but it is not a long-term solution. Learn about the settings of the high IQ noise reduction function (such as the strong setting) and the effect when purchasing it, which will help you shoot in special lighting environments. 8. ** Shutter release parameters without a memory card installed **: This is related to whether the shutter can be pressed when the memory card is not installed. In order to avoid shooting accidents (such as shooting an event or wedding without a memory card and thinking that the shooting was successful), it is more reliable to choose to turn off this function. 9. ** Gridline setting parameters **: Gridlines are helpful for composition. If you can set a 3x3 grid line, it can be used as a reference for composition during shooting to facilitate composition. This is also a consideration. In addition, the resolution was also a factor that needed to be considered. A higher resolution might bring a clearer image effect. There were also different shooting modes, such as AR (Aperture priority mode), TV (Shutter priority mode), P (Automatic), etc., that needed to be considered in different shooting scenes. At the same time, different aperture sizes will bring different depth of field effects. When purchasing, you also need to pay attention to the camera's support range for the aperture and the image quality under different apertures. Read more exciting novels for free
Pay attention to the connection of the DSLR to the computer
There were the following points to note when connecting an DSLR to a computer: 1. ** Data cable connection **: Use the matching data cable to connect the DSLR camera to the USB port of the computer. Make sure that the DSLR camera has enough power before turning on the power switch. 2. ** Memory Card Selection **: Choose the corresponding memory card on the display screen. When the computer screen showed that the connection was successful, he clicked on the camera's memory card. 3. ** Search and copy files **: Enter the folder below the memory card in order. In the "Avchd" folder, copy the required information according to the order of the shooting time. 4. ** Live broadcast connection (if used for live broadcast)**: If you want to use a DSLR camera to get a clearer picture, you can connect the camera to the capture card through the USB cable, then connect the capture card USB to the computer, open the live broadcast/recording software on the computer, and select the capture card as the image/audio input device. 5. ** wireless transmission (if wireless transmitter is used)**: If you want to use CamFiProPlus to connect the DSLR camera to the computer, you must first connect the hot shoe screw to the camera's hot shoe, and then connect the DSLR camera through the data cable. After the camera is connected, you can build your own 5G Wi-Fi network to connect to the computer to transmit data. However, note that after the data cable is installed, the dust cover on the side of the DSLR camera cannot be closed. At the same time, he had to pay attention to the signal indicator lights of the transmitter. From left to right, there were power lights, battery lights, 5G Wi-Fi lights, USB lights, and so on. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Basic parameters of DSLR
The following are the basic settings for common DSLR scenes: ** 1. Portrait Shooting ** 1. ** Still Portrait ** - Shooting mode: Aperture priority mode (LV) can be selected, and the aperture is set to a large aperture, such as F2.8 or larger. - Focus: Focus on the person's eyes. - [Light sensitivity: Daytime light sensitivity can be set between 100 - 400.] - [Focus: Use a focal length of 50mm or above.] - [Shooting distance: Depends on full-body, half-body, and headshot.] 2. ** Portrait in motion ** - [Shooting mode: Shutter priority mode (TV), shutter speed set to 1/250s.] ** 2. Scenery Shooting ** 1. ** Ordinary scenery ** - Shooting mode: You can use P or Aperture priority mode, and the aperture is set to F5.6 or smaller. - [Shot: It is recommended to use a wide-angle lens to accommodate more scenery.] - [Light sensitivity: For example, the clear day's light sensitivity can be set to 100, and the cloudy day's light sensitivity can be set to around 400.] - "Picture composition: avoid placing the most attractive scenery in the middle of the picture. You can use the three-point composition, frame composition, symmetrical composition, diagonal composition, white space composition, etc. 2. ** Special parameters (M file) Shooting on a sunny day ** - It had a shutter speed of about 1/200, and a cloudy day with a shutter speed of 400. ** 3. Flower Shooting ** - [Shooting mode: Aperture priority mode (LV)] - "Lenses: You can choose a large aperture lens or a 100-micro lens. The aperture should be large to highlight the main body and make the depth of field shallow, making the picture softer. - [Composing: You can use the central composition or the nine-square composition to place the main body in the center of the picture.] ** 4. Pet Shooting ** 1. ** Method 1 ** - [Shooting mode: P-grade automatic, continuous shooting function activated.] 2. ** Method 2 ** - [Shooting mode: Shutter priority mode (TV). Shutter set at 1/200s or higher.] ** 5. Night Scene Shooting ** - [Shooting mode: Aperture priority mode. Use a small aperture, such as F10 or smaller.] - [Light sensitivity: Normally set to 100.] - Shutter speed: Can be set to 1/30s. - Metering mode: Set it to the evaluation mode (Matrix Metering mode) and reduce the exposure compensation as appropriate. - [Ancestors: With the help of a tripod, you can use the shutter release to shoot.] ** 6. Silhouette Shooting ** - [Shooting Mode: P-file] - Metering: Use spot photography to measure the brightness of the light. Then, add or subtract the exposure according to the actual needs. Place the focus on the bright spot to measure the brightness. The dark part will become a black silhouette. ** 7. Shooting of still small things like flowers, birds, and insects ** - Shooting mode: Aperture priority mode (LV), the aperture is best to be f5.6 or larger. - [Focus: 50mm and above.] - [Shooting distance: Try to shoot within 1 meter, to blur the background.] ** 8. Portrait Shooting at Night ** - [Shooting mode: Aperture priority mode, f8 aperture.] - Light sensitivity: 100 - 400. - "Anciliaries: Use a tripod, set up automatic or custom white balance, and use slow sync flash (the flash flashes once when the shutter is pressed, and flashes again before the end of the exposure. You can't leave when you're shooting). ** 9. Shooting of moving objects ** 1. ** Method 1 ** - When the light is good, use Aperture priority mode (UA). A small aperture below f8 can get a large depth of field; a shallow depth of field can be obtained above f8, and continuous shutter can be selected. 2. ** Method 2 ** - If you want a dynamic effect, use the shutter priority mode (TV), set the shutter to about 1/30, focus, press the shutter, and at the same time, the lens will follow the target at an appropriate speed. In addition, you also need to pay attention to the photo size, format, and image quality settings. In special scenes, you may need to customize the white balance, set the shooting style, choose the appropriate focus mode, and the basic settings such as sensitivity (you can also directly set the sensitivity to the STAR position and let the camera adjust according to the scene) and exposure mode (M, aperture priority, shutter priority). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR dimming parameters
According to the available information, the dimming parameters of the Silver Swallow SY-28As flash for the Sony-grade single-lens reflex were mentioned. The flash control had two automatic apertures, F2.8 and F5.6, and the flash index was 28 (100, 50mm focal length). However, this was only the dimming parameters of the specific flash. Generally speaking, the dimming of an DSLR camera was related to parameters such as aperture, shutter speed, and sensitivity. The aperture size directly affected the amount of light entering. A large aperture would enter more light, and a small aperture would enter less. A slow shutter speed would allow the light to enter longer, and a fast shutter speed would allow the light to enter shorter. The higher the sensitivity value, the more sensitive the camera was to light. However, high sensitivity might bring about an increase in noise. Under different shooting scenes and needs, these parameters needed to be adjusted to achieve the appropriate dimming effect. For example, when shooting portraits, a larger aperture (such as F1.8 - F5.6) may be used to obtain a shallow depth of field to highlight the main body of the character, but pay attention to the accuracy of the focus to avoid losing details; when shooting scenery, a small aperture (such as F8 - F16) may be used to ensure a larger depth of field to make the whole picture clear. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR English parameters
The following are some common English parameters for DSLR: 1. ** Metering Mode **: It can be divided into Spot Metering, Matrix Metering, and Center -weighed Metering. 2. ** Iso-Mode **: Iso-is the sensitivity (International Standard Organization). The value can be adjusted. 3. ** Shutter Speed Mode **: S represents Shutter Speed. 4. ** Exposure-Value Mode **: Exposure-Value means exposure compensation. 5. ** AF-mode (auto-focus Mode)**: This is the auto-focus mode, which can be divided into active and passive modes. 6. **AWB Mode **: White Balance Mode. 7. Aperture: The English name is Aperture. The F value is often used to indicate the size and is used to control the amount of light entering. 8. ** NEP (RAW)**: An image format, 12-bit or 14-bit, can be compressed or compressed without loss. 9. **JPEG**: Common image format, fine (approx. 1:4), average (approximate. 1:8), basic (approximate. 1:16) compression. 10. DFC (Design Rule for Camera file system): 11. **Exif (Exchangeable Image File Format for Digital Still Cameras)**: Exchangeable image file format (for digital cameras). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Huahai DSLR parameters
If you were to use a single-lens reflex camera to shoot the sea of flowers, you would need to consider the following parameters: 1. ** Choice of lens **: If you want to shoot a large area of colorful flowers, you usually need to use a wide-angle lens; if you want to shoot the details of a flower at a close distance, you can use a telephoto lens, and it is best to use a macro lens. This can achieve the ideal definition and make the details of the subject clear, which is not available in ordinary lenses. 2. ** Aperture Setting **: Aperture can be adjusted according to your needs. For example, if you want to blur the background and highlight the main body of the sea of flowers, you can increase the aperture; if you want to make the whole sea of flowers appear clearly, you need to adjust the aperture size according to the actual situation. 3. ** Focus **: If you are shooting a large scene, autofocus is usually fine. However, if you are shooting a close-up close to the flower, autofocus may not work well. You can switch the AF-autofocus on the lens to MTF-manual focus, and then turn the focus ring to focus. 4. ** Photometering **: Generally, you can choose average dimming, which will take into account the exposure of the subject and the background at the same time. However, if the flower is light-colored and the surrounding is dark-colored, using this dimming method may cause the flower bud to be overexposed. In this case, you can use partial dimming or spot dimming. Spot Metering would consider the exposure of the main body and its surroundings, but the main body had a higher weight. Spot Metering only considered the exposure of the main body, and could be applied flexibly according to the actual situation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Sony DSLR lens parameters
The following are some of the parameters related to common Sony-grade DSLR lenses: ** 1. Focus ** 1. ** SonyMDT18 - 135mmF3.5 - 5.6Sam**: The focal length range is 18 - 135mm. 2. ** PE PZ 28 - 135mm F4G OSS**: focal length 28 - 135mm. 3. ** ESF-S 18 - 200**: The focal length range is 18 - 200mm. 4. ** Sony70 - 400mm F4 - 5.6G SSM**: The focal length range is 70 - 400mm. 5. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: The focal length range is 24 - 240mm. 6. ** SonyFE24 - 70mmF2.8GM**: The focal length is 24 - 70mm. 7. ** SonyFE24 - 105mmF4 **: The focal length range is 24 - 105mm. ** 2. Maximum aperture ** 1. ** SonyMD18 - 135mm F3.5 - 5.6Sam**: It is a floating aperture lens, and the maximum aperture changes between F3.5 - 5.6. 2. ** PE PZ 28 - 135mm F4G OSS**: A constant aperture lens with a maximum aperture of F4. 3. ** ESF-S18 - 200**: The maximum aperture is F2.8. 4. ** Sony70 - 400mm F4 - 5.6G SSM**: It is a floating aperture lens, and the maximum aperture varies between F4 - 5.6. 5. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: It is a floating aperture lens, and the maximum aperture changes between F3.5 - 6.3. ** 3. Identification and characteristics of the lens type ** 1. ** PE **: E-mount full-frame lens, suitable for all E-mount devices. 2. **E**: E-mount APS-C frame lens, can be installed on all E-mount devices, but when paired with a full-frame camera, there will be frame trimming by default (only the central part of the CPU is used). If the image is not trimmed, there will usually be obvious halation or black blocking. 3. **G**: Inherited from Minolta's high-end lens logo, most of them have nano-coating. 4. **ZA**: A lens product jointly developed by Sony and Zeiss. The lens body and packaging have the double logo of Sony and Zeiss, all with T* coating. The lens may also have the words representing the lens structure (such as Warrio-Tessar, Planer, Distagon, Sonnar, etc.). There is no new product since July 2016. 5. GM (G-Master or "G-Master"): It was the highest-end lens product line from Sony, and all of them were nano-coated. ** 4. Other characteristics ** 1. ** PE PZ 28 - 135mm F4G OSS**: It has a power zoom function, which can provide smooth angle conversion and anti-shake function. 2. ** ESF-S18 - 200**: Automatic focus and anti-shake support. 3. ** Sony70 - 400mmF4 - 5.6G SSM**: It has SSM (ultrasonic motor), which is good for autofocus operation. 4. ** SonyFE24 - 240mmF3.5 - 6.3OSS**: With OSS (optical image stabilization system). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The role of various parameters of the DSLR
The following are the common parameters of the DSLR and their functions: ** 1. Focus related parameters ** 1. ** AF-ON (autofocus start button)** - It can be set to switch between single focus, autofocus, and servo-autofocus. When taking photos, you can directly use this button to select the focus mode, which is convenient to adjust the focus mode according to different shooting scenes and objects. For example, you can choose single focus when shooting still objects, and you may need to use servo-autofocus when shooting dynamic objects. 2. ** M-GN (multi-function button)** - It can be set to drive mode, focus mode, white balance, light measurement mode, etc. During the shooting process, the button could be clicked to switch the settings at will, allowing the photographer to quickly adjust the shooting parameters to adapt to different shooting needs. 3. ** AF-M (autofocus and manual focus mode)** - Usually, it was set to AF-autofocus mode, and the camera could automatically adjust the focus. However, when the light at night is too dark and the contrast of the snow in winter is low, the camera may not be able to accurately autofocus, or when you need to deliberately use manual focus to shoot a blurry effect (such as shooting at night), you can switch to M manual focus mode. ** 2. Image display and confirmation of relevant parameters ** 1. ** Depth of field button ** - It could be set to a photo style. Through this setting, one could use this button to choose whether to shoot a portrait or a landscape. Different photo styles would affect the color and contrast of the picture. 2. ** Image confirmation ** - After the photo is taken, it will stay on the camera for a certain period of time (can be set, usually 2 seconds) to check the effect of the photo, allowing the photographer to quickly determine whether the photo meets the expectations, such as whether the composition is suitable, whether the desired picture is captured, etc. ** 3. Image quality related parameters ** 1. ** Light sensitivity (USB)** - You can set the minimum and maximum values. During daily shooting, the camera would automatically adjust according to the surrounding light when the sensitivity was set to AUTO. The higher the sensitivity, the more sensitive the camera was to light, but too high a value would increase the noise in the photo. The equipment itself had a maximum value that allowed it to produce the best image. If this value was exceeded, the noise in the photos would increase significantly. 2. ** High Iso noise reduction setting ** - In extremely dark environments, when there is no light, no tripod, and the exposure time cannot be extended, you can set the high Iso-noise reduction to adjust the brightness of the picture. However, this was not an ideal long-term solution. When the environment was not bright enough, it was best to use a light filling device. 3. ** Picture size, format, and quality (such as large size, medium size, small size, JPG, and RAW format)** - Different photo size were suitable for different scenes. For travel photography, large size (L), high quality (Fine) JPG with RAW as the default storage format was better. RAW was used for archive and refinement, and JPG was used for batch processing and fast rendering. For scenes that required a large number of shots, such as news photography, medium size (M) and small size (S) were more useful. Small size could save storage space and shorten transmission time, but after shooting, it had to be adjusted back to large size, otherwise it would affect the quality of the next shot. ** 4. Lens-related parameters ** 1. ** lens aberrations correction (peripheral brightness correction, distortion correction, digital lens optimization)** - Turning on the peripheral light correction could reduce the dark corners of the photos taken, and turning on the distortion correction and digital lens optimization selection standards could improve the image quality and reduce the image distortion caused by the lens. 2. **OS ON/OFF (anti-shake switch, Canon says IS and other brands have different names)** - The anti-shake function was used to compensate for the shaking of the hand-held camera. When the anti-shake function was turned on, the safety shutter could be increased by about 3 stops when shooting with a hand-held camera. For example, when shooting with a 200mm focal length, the anti-shake function could be turned on at a shutter speed of 1/60s to ensure that the photo would not be "blurred." ** 5. Other parameters ** 1. ** Memory card not installed, release shutter ** - If it was set to not close, the shutter could be pressed without a memory card, but if it was set to close, the shutter could not be pressed without a memory card. When shooting important scenes such as events or weddings, be sure to set it to off to avoid mistakes of not installing a memory card to shoot the entire process. 2. ** Gridline Setting ** - When gridlines were turned on (such as 3x3 gridlines), a "jing" line would appear on the camera display, which could be used as a reference line for composition. It would help both novices and veterans in composition. 3. ** White Balance ** - It was important to set a custom white balance in a specific lighting environment (such as when taking a portrait in a room with pink or yellow lights). By setting the pure white photo you just took as the reference white, you can let the camera take photos of natural colors in the same environment. However, every time you set the custom white balance, you have to return to the default value (automatic white balance) after the shooting is completed because this setting is only applicable to the current environment and lighting conditions. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Various DSLR photo parameters
The following are the parameters of the DSLR photos in different shooting scenes: ** 1. Portrait Shooting ** 1. ** Aperture **: Use an aperture of f5.6 or larger to blur the background and highlight the main character. 2. ** focal length **: 50mm or above. The shooting distance depends on different requirements such as full-body, half-body, and headshot. 3. Focus: Focus on the person's eyes, making the character look more lively. 4. ** Light sensitivity (USB)**: The daytime USB is 100, and the maximum is 400. ** 2. Scenery Shooting ** 1. ** Shooting Mode **: Aperture priority mode (Av). 2. Aperture: You can use an aperture of f8 or smaller to obtain a larger depth of field and ensure the overall clarity of the picture. ** 3. Shooting of still small things such as flowers, birds, and insects ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: F5.6 or higher is best. 3. ** Focus **: 50mm or more. 4. ** Shooting Distance **: Try to shoot within 1 meter to blur the background. ** 4. Night Scene Shooting ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: A small aperture below f8 can create a starlight effect. 3. ** Light sensitivity (USB)**: Within USB 200. 4. ** Shutter Speed **: Slow down the shutter speed and extend the exposure time. This way, the person walking past will disappear from the picture. If you use a hand-held camera, it is recommended to use a tripod or place the camera on a fixed object (such as a stone, stool, etc.) to prevent the image from blurring due to hand shaking. ** 5. Night Portrait Shooting ** 1. ** Shooting Mode **: Av file. 2. ** Aperture **: Around f8. 3. ** Light sensitivity (USB)**: USB 100 - 400. 4. ** White Balance **: Sets automatic or custom white balance. 5. ** Flash **: Use slow sync flash (the camera's default night portrait flash mode). The flash will flash once when the shutter is pressed and once again before the exposure ends. The person cannot leave during the shooting. ** 6. Shooting of moving objects ** 1. ** When the light is good ** - [Shooting Mode: Av] - Aperture: A small aperture below f8 can get a large depth of field, and above f8 can get a shallow depth of field. - Shutter: Continuous shutter option. 2. ** When you want a dynamic effect ** - [Shooting Mode: TV] - Shutter: Set it to about 1/30. When you focus and press the shutter, the lens will follow the target at an appropriate speed to create a dynamic effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR character photo parameters
When shooting a DSLR portrait, the parameters would vary depending on the shooting situation. If you want to shoot a close-up of a person, you can refer to still life shooting. Set the sharpness to moderate, pay attention to the eyes or important parts of the person, and use the middle composition. If you want to shoot a portrait outdoors, the shutter speed can be set to 1/100s, Iso100, aperture F1.2 - 2.8. For indoor portraits, the shutter speed can be set to 1/80s, Iso1500, aperture F2.8 or less. When shooting people in motion, using aperture priority mode (audio file) may not meet the requirements. In this case, you can use shutter priority mode (TV file), and the shutter speed is set to about 1/250s. This way, it is not easy to make the photo blurry. If you want to shoot a person with a background, use a medium aperture F8 to highlight the background and the character. The focal length is the widest. The composition can be based on the three-point method or the golden section method. The lowest possible setting of the USB is 100. Save it in the RAW format. Pay attention to the correct exposure of the face. The color of the character's clothing should be different from the background. If the other parts are too black or overexposed due to insufficient tolerance, you can pull it back through the curve later. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
DSLR party parameters setting
If the party was filmed without a lamp: - ** static characters and scenery (suitable for on-stage speeches, guest check-in, group photos, communication, and other scenes with small movements)**: - [Mode: M mode] - [Shutter: 1/60 second.] - Aperture: F4 - F5.6. - <strong></strong>Because in this scene, the shutter did not need to be too high, and if the light was bright, the USB could be turned on automatically, and the aperture was above F4 to ensure the clarity of the person in the photo. - ** Dynamic Character Scenery (suitable for programs, dances, lottery draws, awards, toasts, and other scenes with strong interaction)**: - [Mode: M mode] - [Shutter: Set to 1/125 - 1/160 seconds. If necessary, it can be increased to 1/200 seconds.] - Aperture: F4 - F5.6. - <strong></strong>Everything was done to capture the main character clearly. As it was a dynamic scene, the shutter speed could not be too slow, and the USB had to be controlled below 3200. In addition, if there was a stage electronic screen in the party scene, since the output frequency of the electronic screen was about 50 Hertz, in order to avoid the appearance of blurred screens and shadows when shooting non-continuous images, you could use a speed of about 1/50 second, speed priority mode, and the sensitivity setting to automatically shoot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>