Uncle's homemade Pikachu handmade tutorial, simple picture
The following is a simple Pikachu crafting tutorial: Materials: Colored paper (yellow, black, white), scissors, glue or glue sticks, colored pens or watercolors, eye sticker or small beads (used to make eyes). Steps: 1. He drew the outline of Pikachu on the yellow paper. 2. If it was an origami Pikachu, you could choose a 15-centimeter square yellow paper and follow the steps below: - Turn out the middle line. - Fold both sides to the middle line. - He flipped it down according to the picture. - Fold the top two sides in half toward the center. - He opened all the folded ones. - Folds according to a specific diagonal line (similar to the red diagonal line). - Folds according to a specific dotted line (similar to the red dotted line), and the intersection of the two dotted lines stands upright. - Fold the vertical corner down according to the picture. - The left side was folded in the same way. - He opened up the corners on the top and pressed them down to form a square shape. - Fold the two sides of the square in half. - Fold the top corner down. - He opened the 10 - 12 steps folded piece and opened the inside. - After opening it, fold the two sides inward along the dotted line, and then turn the sharp corner forward (as shown in the picture). - The sharp horn on the top bent down a little. - Fold the top down to the dotted line. - Then, he followed the dotted line and flipped it downwards. - Turn right to left. - I turn it over to the dotted line. - Then, he flipped back to his original spot. - The left side was folded in the same way. 3. If you use a square yellow colored paper 10*10cm folding paper: - First, he folded the basic rice shape (diagonally and diagonally). - Fold it into a small square according to the crease. - Then, he folded the corners of both sides to the center line, both front and back. - He opened it and folded it inside. - Fold the bottom corner upwards, align the bottom corner with the inside corner and fold it upwards (the reverse folding method is the same). - The lower corner was folded into a crease. - He turned it over and folded the two corners. - He just needed to draw a cute expression with a watercolor pen. 4. After the production was completed, he could use colored pens or watercolors to describe the details as needed, such as applying blush to the Pikachu, and then use eye sticker or small beads to stick it on as eyes. A Pikachu was completed by hand. However, he did not find the picture content of this tutorial. Read more exciting novels for free
Uncle's homemade Pikachu handmade tutorial is simple
Here are some simple Pikachu crafting tutorial: ** 1. Paper Pikachu (No scissors or glue needed)** 1. [Materials: 10*10cm square yellow colored paper, watercolor pen.] 2. Steps: - First, he folded the basic rice shape (diagonally folded and folded on the opposite side), and folded it into a small square according to the crease. - Fold the corners of both sides to the center line (both sides are folded like this), then open it and fold it inside according to the crease. - Fold the lower corner upwards, align the lower corner with the inner corner, and then fold it upwards (the reverse folding method is the same). - The lower corner was folded into a crease, and the upper two corners were folded over. - After folding it, he used a watercolor pen to draw a cute expression. The cute Pikachu was done. ** 2. Paper 3D Pikachu ** 1. [Material: 15 cm square yellow paper.] 2. Steps: - Take a 15-centimeter square yellow paper, fold it according to the picture, and fold both sides to the middle line. - He folded the top part according to the picture, then folded the top two sides toward the center, and then unfolded the folded parts. - The folding was done with a specific diagonal line (red diagonal line in Fig. 5) and dotted line (red dotted line in Fig. 6, the intersection of the two dotted lines is vertical). - Fold the corner down according to the picture. Fold the left side in the same way. - He opened the top corner and folded it down into a square shape. He folded the two sides of the square into the middle. - Fold the top corner down, then open the 10 - 12 steps folded corner and open the inside. - After opening it, fold the two sides inward along the dotted line, and then turn the sharp corner forward. - The sharp corner on the top was folded down a little, and the top was folded down to the dotted line, and then folded down along the dotted line. - Turn the right side to the left (fold it to the dotted line and then turn it back), and fold the left side in the same way. - Fold along the horizontal line to form an obvious dotted line. Fold the left and right sides up (insert them into the gap between the two sides). - He turned the work to the other side and folded the two sides in half to form two slanted lines. - Turn the work to the other side and fold the right corner outward (until the dotted line, this is the Pikachu's ear). During the process of folding the ear, the end of the ear should pass the red line, and the left side should be folded in the same way. - He flipped the work to the other side and opened the top as shown in the picture. After opening it, he folded it down and opened the two sides and the top. ** Three, balloon Pikachu ** 1. [Materials: 260-centimeter long yellow balloon, black pen.] 2. Steps: - He made a single-ear knot the size of a finger, then twisted a long bubble about four fingers long, then twisted a single-ear knot the size of a finger and a long bubble about four fingers long, connecting them with the first single-ear knot. - Using the same technique, he made a set of four finger-long bubbles around the two single-ear knots and tidied them up. - With the center of one of the long bubbles as the dividing point, two long bubbles were made on average (using Qi as the two legs of Pikachu). - Using the center of the other group's bubble as the dividing point, he pushed the balloon to the middle and made a Pikachu ear. - He took a suitable length and tied it into a knot. Then, he tied the remaining part into a knot and twisted it into another ear knot. - He continued to catch his breath and twisted his ear together. - Using a black pen, he drew two semicircles on the two ears of the balloon, followed by the eyes and mouth. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Uncle's homemade Pikachu handmade paper box is simple
The following is a simple way to make a handmade Pikachu paper box: First prepare a square yellow colored paper (for example, 10*10cm), then fold it into a small square according to the crease. Then fold the corners on both sides to the middle line (both sides do the same), open it and fold it inside. Fold the lower corner upwards (align the lower corner with the inner corner and fold it upwards again, the reverse folding method is the same), fold the lower corner to the crease, turn it over and fold the upper two corners. Then, you can use a watercolor pen and other tools to draw the characteristics of Pikachu, such as cute expressions. If there were any steps in the production process that he could not understand, he could refer to similar video tutorial for more detailed instructions. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Uncle's homemade Pikachu manual tutorial video is simple
The following is a Pikachu handmade tutorial: Materials: Colored paper (yellow, black, white), scissors, glue or glue sticks, colored pens or watercolors, eye sticker or small beads (used to make eyes). Steps: 1. Drawing the outline: First, draw the outline of Pikachu on yellow paper. You can refer to the Pikachu pictures on the Internet to ensure that the shape is accurate. The outline included the head, body, ears, and tail. 2. Cut: Carefully cut out the outline with scissors. 3. Add details: Cut out Pikachu's eyes, nose, and mouth using black paper and glue them onto the yellow outline. There was also an origami Pikachu tutorial: 1. Take a 15-centimeter square yellow paper and fold it according to the picture. 2. Fold both sides to the middle line. 3. He flipped it down according to the picture. 4. Fold the top two sides in half toward the center. 5. He opened all the folded ones. 6. Fold the red slanted line in Figure 5. 7. Fold the red dotted line in Figure 6, and the intersection of the two dotted lines will stand upright. 8. Fold the vertical corner down according to the picture. 9. The left side was folded in the same way. 10. He opened up the corners on the top and pressed them down to form a square shape. 11. Fold the two sides of the square in half. 12. Fold the top corner down. 13. He opened the 10 - 12 steps folded piece and opened the inside. 14. After opening it, fold the two sides inward along the dotted line, and then turn the sharp corner forward (as shown in the picture). 15. The sharp horn on the top bent down a little. 16. Fold the top down to the dotted line. 17. Then, he followed the dotted line and flipped it downwards. 18. Turn right to left. 19. I turn it over to the dotted line. 20. Then, he flipped back to his original spot. 21. The left side was folded in the same way. In addition, you can also use a small program to create Pikachu: 1. First, he found a small program that could draw the pixel-like image. He opened WeChat> Discovered> Small Program and entered "You are cute and have magic spells." 2. After entering the small program, click the "Drawing" icon at the bottom, and then click the "Drawing" button to enter the drawing interface. 3. When drawing a line, one could choose a color and apply it directly on the canvas area. 4. He could fill in the original color, determine the brightness, highlight, and so on. Of course, he could also choose the drawing method according to his personal habits or style. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to make a Pikachu Umbrella Handmade tutorial is simple
There was a simpler way to make a Pikachu umbrella. First, prepare a large paper clip and cut off the excess parts, leaving only the " J " shaped part. Prepare a round paper card and cut a gap. After applying hot melt glue, stick the paper clip. Then, insert the umbrella handle into it and apply hot melt glue on it. Then, he prepared a beautiful umbrella cover, folded it in half, and then folded it again. He folded the folded part along the center line, then turned the remaining part over and folded it, and then used scissors to cut a concave arc. There was also a method to make an origami Pikachu umbrella. This was a combination of origami. The difficulty was 2 stars, but the specific steps were not given in detail. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade Pikachu tutorial
Here are some handmade Pikachu manuals: - * * Origami Pikachu (Plane)**: - Prepare a 10 * 10 cm square yellow colored paper. First, he folded it into a small square. - Fold the corners of both sides to the center line, both front and back, then open it and fold it inside according to the crease. - Fold the lower corner upwards, align the lower corner with the inner corner, and then fold it upwards. The reverse folding method is the same. - The lower corner was folded into a crease, and the upper two corners were folded over. - Finally, he used a watercolor pen to draw the expression. - Origami Pikachu (3D): - Prepare a piece of 7.5cm * 7.5cm square paper and a colored pen. - First, he folded the square paper into a "Mi" crease, then used a colored pen to draw Pikachu's eyes, nose, mouth, and blush in the center of the square paper (the upper half of the "Mi" was drawn for the eyes, and the lower half was drawn for the other parts). - Turn the paper over and fold it inward along the crease on the opposite side of the eye and mouth, creating a double-layered triangle. - The side with the mouth on it was facing up, and the left and right corners of the triangle were folded up toward the center line, and then the left and right sides were folded toward the center line. - The left and right corners were folded back, and the small triangle was inserted into the big triangle to be fixed. - Turn to the back and repeat the previous step. - He folded up the left and right corners and used a black pen to draw Pikachu's ears at the tip of the corner. - He blew into the opening to make it bulge and fold it. - * * Pikachu: - Prepare a 260-centimeter long yellow balloon. - He made a single-ear knot the size of a finger, then twisted a long bubble about four fingers long, then twisted a single-ear knot the size of a finger and a long bubble about four fingers long, and connected them with the first single-ear knot. - Using the same technique, he made a set of four finger-long bubbles around the two single-ear knots and arranged them. - Using the center of one of the long blisters as the dividing point, two long blisters were made on average (as the two legs of Pikachu). - Using the center of the other bubble as the dividing point, he pushed the balloon to the middle to make a Pikachu ear. - He took an appropriate length and tied a knot. Then, he tied the rest of the knot to another ear knot and continued to twist it together with the previous ear. - He used a black pen to draw two semicircles on the two ears of the balloon, then drew the eyes and mouth. - * * Self-made Pikachu mini bag (not the whole process of making the bag, but to display the Pikachu theme of the items in the bag)**: You can prepare some Pikachu-related items and put them into the self-made mini bag, such as Pikachu cleaning spray, Pikachu lipstick, Pikachu mirror, Pikachu puzzle, Pikachu homework, Pikachu bank card, etc. - * * Pikachu Charger (complete production process not specified, materials required)**: Requires clay, portable power source, iron wire (tail), hot melt glue, heat gun heating, expansion foam, clay, paint, and other materials. - * * Using AI to make Pikachu animation videos **: - Use Kimi to generate hints for plot scenes (For novices, the creative design phase is difficult, so you can use AI). - Using the AI video tool to generate an animated video, click on the "AI Image" function, copy and paste the image scene prompt words generated by Kimi into the input box, select the 3:4 size and the number of generated, and click generate. He selected one of the generated images and clicked on the "Create Video" function at the bottom right corner. Then, he copied Kimi's prompt into the input box and clicked on the "Create Video" function. - He used editing to edit the Pikachu animation video generated by Kling. He edited it according to the plot order, added Pikachu sound effects and background music, and then released it. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Pikachu handmade simple
Here are a few simple ways to make Pikachu by hand: ** 1. Paper Pikachu ** 1. ** Material preparation ** - Colored paper (yellow, black, white), scissors, glue or glue sticks, colored pens or watercolors, eye sticker or small beads (used to make eyes). 2. ** Production Steps ** - ** Draw the outline **: First, draw the outline of Pikachu on yellow paper. You can refer to the pictures online to ensure the shape is accurate. The outline includes the head, body, ears, and tail. - ** Cut **: Use scissors to carefully cut off the drawn outline to ensure that the cut edge is smooth. - ** Add Details **: Cut out Pikachu's eyes, nose, and mouth with black paper and glue them to the yellow outline. You can use white paper to make the highlight of the eyes to make them look more vivid. - [Complete: Finally, check the overall effect to ensure that all the details are in place.] He could use a colored pen to add some additional decorations on Pikachu's body, such as small electric shock symbols. ** 2. Origami Pikachu (No need to cut and stick)** - He took a 10*10cm square piece of yellow colored paper and folded it into a small square according to the creases. - Fold the corners of both sides to the center line (both sides are folded like this), open it and fold it inside according to the crease. - Fold the bottom corner upwards (the bottom is aligned with the inner corner), and then fold it upwards. The reverse folding method is the same. - The lower corner was folded into a crease, and the upper two corners were folded over. - After folding it, he used a watercolor pen to draw a cute expression. The cute Pikachu was done. ** Three, balloon Pikachu ** - Prepare a 260-centimeter long yellow balloon. - He made a single-ear knot the size of a finger, then twisted a long bubble about four fingers long, then twisted a single-ear knot the size of a finger and a long bubble about four fingers long, connecting them with the first single-ear knot. - Using the same technique, he made a set of four finger-long bubbles around the two single-ear knots and tidied them up. - With the center of one of the long bubbles as the dividing point, two long bubbles were made on average (as the two legs of Pikachu). - Using the center of the other group's bubble as the dividing point, he pushed the balloon to the middle and made a Pikachu ear. - He took a suitable length and tied it into a knot. Then, he tied the remaining part into a knot and twisted it into another ear knot. - He continued to catch his breath and twisted his ear together. - Using a black pen, he drew two semicircles on the two ears of the balloon, then drew the eyes and mouth. A Pikachu was done. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Superhero handmade tutorial is simple and beautiful
Here are a few simple and good-looking superhero crafting guides: ** 1. Making superheroes with twisting sticks, felt, and other materials ** 1. Materials: Twister stick, felt, paper straw, eyes, beads, wooden beads, glue, scissors, marker. 2. Production steps: - He drew the hair and the hero's face on the wooden bead, then glued the eyes and drew the mouth. - He twisted the three twisting sticks together from the middle to adjust the shape. - He strung three beads onto two twisting sticks as body parts. - Cut a straw into eight small pieces. Each superhero needs two straws. String the beads and each small piece of straw on the twisting stick to build each limb. - Bending the ends of the twister into hands and feet and trimming the excess. - He strung the head to the two twisting rods at the top and fixed it, then trimmed off the excess parts. - Cut the cloak out of felt and stick it on the back to complete the production. ** 2. Cardboard superhero mask ** 1. Materials: Cardboard, scissors, glue, colored pens, and string. 2. Production steps: - Draw the corresponding shape according to the superhero image you like on the cardboard and cut it out with scissors. - Use a colored pen to paint the mask in your favorite color and add details. - He glued the two sides of the mask together, leaving the eyes and nose on both sides. Finally, he added a string to make it easier to wear. ** 3. Use oatmeal boxes to make a superhero wristband (can be matched with a simple mask)** 1. [Material preparation: Oatmeal box, paint (red, blue), paint brush, scissors, carving knife, 2 stars, felt (used to make wrist guards and possible simple masks).] 2. Production steps: - Cut out two sides of the box and paint the main color blue on both sides. - After the main color dried, the edges of the cuffs were painted red. - After the paint was completely dry, cut the opposite ends of the cuffs according to the size of the wrist. - Sticking a decorative yellow star on the wrist guard to complete the production. If he wanted to make a simple mask, he could cut it out of the remaining felt and tie it with an elastic rope. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Pikachu sketching tutorial, pictures, simple strokes
The following is a simple tutorial for a Pikachu sketch: 1. Tools: 32K cardboard, pencil (HH, 2B, 6B, 8B), eraser. 2. Starting line shaping (HH, 2B, 4B): First, use a 2B pencil to draw a simple field grid. Pay attention to the use of the pen to be light, so that the outline can be erased during later adjustment. 3. Pikachu had a round body, big eyes, long black ears, a small mouth like the number 3 on the side, small power pockets on both sides of its cheeks (which could be represented by simple lines), black eyes, and two red circles on its cheeks. 4. After refining the outline and facial features, you can use different types of pencil to express the light and dark relationship of Pikachu. For example, use a softer pencil (6B, 8B) to draw the shadows to show the three-dimensional feeling. Since you haven't found a tutorial with pictures, you can enter "Pikachu sketching tutorial pictures" in the search engine to get more tutorial with picture examples so that you can draw better. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Origami Pikachu label tutorial is simple and beautiful
The following is a simple and beautiful Pikachu Bookmark Origami tutorial: 1. [Prepare materials: A piece of square paper (such as 7.5cm*7.5cm square paper) and a colored pen.] 2. Fold: Fold a square piece of paper into the word "Mi". 3. Draw the face: Use a colored pen to draw Pikachu's eyes, nose, mouth, and blush in the center of the square paper. To be specific, the Pikachu's eyes could be drawn in the upper part of the character, and the other parts could be drawn in the lower part. 4. Begin folding: Turn the paper over and fold it inward along the crease on the opposite side of the eye and mouth, creating a double-layered triangle. 5. Continue to fold: the side with the mouth on it was facing up. Fold the left and right corners of the triangle up to the center line, then fold the left and right sides to the center line. After that, he would make some adjustments and improvements based on the shape of the Pikachu, such as folding the lower corners upwards. A Pikachu bookmark would basically take shape. Finally, he could use a watercolor pen to make the Pikachu bookmark more beautiful. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to draw a simple picture of Pikachu
Here is a simple way to draw Pikachu: 1. He started with the eyes, drawing two round eyes. 2. He drew a small black dot between the two eyes as the nose, and then drew the mouth below the nose. 3. The ears were drawn by extending the curves from the two sides above the eyes. Pikachu's ears were longer and the tips were black. 4. The outline of his face was outlined. Pikachu's face was fat. 5. Draw a hand in front of Pikachu's chest, then draw another raised hand. 6. The outline of his body was outlined. 7. Draw on your feet. 8. He drew a semi-circular blush on both sides of his face. This was the power bag of Pikachu, plus a lightning-shaped tail. 9. Finally, the Pikachu could be painted yellow, the tip of the ears, eyes, and tail black, and the blush red. Or the following steps could be used: 1. He first wrote two sixes, then two zeros, and then drew two leaves as ears. 2. First, he wrote two 1s and then four 0s to represent eyeballs. 3. He drew the nose and mouth, then connected the two sides of the body. 4. He drew the buttocks, four 1s for the arms, and his pinky. 5. He drew a lightning-like tail and then colored it. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>