The reason why the floor drain is blocked and the water will turn back?
There were the following reasons why the floor drain would turn back if it was blocked. First, the diameter of the sewer pipe was too small to meet the drainage needs, and water would come out from the floor drain. Secondly, if the sewer pipe was blocked, it would cause poor drainage, especially when the water from the floor drain had dirt and an unpleasant smell. This blockage was more obvious. Third, when the washbasin and the floor drain shared a pipe, the water pipe could not withstand the water flow, and the water would overflow from the floor drain. In addition, if there was construction waste blocking the sewer pipe, or if the owner and the property were negligent in maintenance during the use, if there were large objects and non-decomposing sundries thrown into the sewer, or if the kitchen food residue oil was directly poured into the sewer, it would cause the sewer pipe to be blocked and lead to the floor drain. Especially in old houses, the sewer pipe had been used for a long time. The dirt and impurities stuck to the inner wall of the pipe, making the pipe diameter smaller, and it was easy to cause water to flow back. Also, during the renovation of second-hand houses, if the design and construction of the drainage pipe had problems such as the diameter of the pipe being thin, the bottom horizontal pipe being too long, the angle of the bend being too sharp, and the slope being insufficient, resulting in insufficient drainage capacity, or the construction waste being directly discharged into the sewer pipe during the construction and renovation stage, causing blockage, it would cause the floor drain to reverse. Read more exciting novels for free
The floor drain pipe is blocked and water is flowing out
If the floor drain pipe is blocked and the water is reversed, the following treatment methods can be taken: 1. ** Draining and dredging method **: First, flush the floor drain continuously, then choose the U-shaped iron wire to extend into the floor drain and rotate it continuously to rotate the blocked foreign matter down. Finally, flush it away with clean water. 2. ** Air pumping method **: Prepare a pump, put the rubber tube of the pump into the drain pipe of the floor drain, seal the surroundings of the floor drain, and then put enough water into it. Use this space to pump air into the floor drain to quickly clear the drain. 3. ** Vinegar and baking soda method **: First pour baking soda into a bowl, then add vinegar and a small amount of water. After mixing it, he poured it into the drain. After a while, the drain would clear itself. 4. Soda plus vinegar dredging method: pour half a cup of cooked soda into the blocked floor drain, then pour half a cup of vinegar. The soda and vinegar will react to remove the grease adhered to the pipe, thus clearing the pipe. 5. [Alkaline dredging method: Throw the kerosene into the sewer pipe and pour some hot water into the pipe. When the kerosene meets the hot water, it will undergo a chemical change, causing the temperature in the pipe to rise rapidly. The grease in the pipe will melt and be discharged with the water.] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How was the low-level floor drain blocked?
If you want to block the floor drain, there are several ways: 1. Directly plug the floor drain: Open the floor drain cover and fill the floor drain with cement mortar, but this method may have some hidden dangers. 2. Blocking the drainage pipe connected to the floor drain: First, remove the installed floor drain from the pipe, clean the surrounding, then choose a pipe cap made of PVP material that matches the water pipe, install the pipe cap on the pipe with PVP glue to block it, and finally use cement mortar to seal the ground. This method is more reliable and safe. 3. Downstairs operation: Find the drainage pipe of the floor drain, cut it with a saw, choose a pipe cap of the same material, and directly apply the PVP glue to seal the pipe. This way, the floor drain can be blocked. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Why did the toilet and the floor drain turn back together? How to solve it?
The toilet bowl and the floor drain may be reversed for the following reasons: 1. The main sewage pipe was blocked. This was a relatively common reason. When the main sewage pipe was blocked, the drainage was not smooth, causing the sewage to be unable to be discharged normally when the toilet was flushed and the floor drain was drained, resulting in the phenomenon of water reversal. 2. The design and construction problems of the drainage pipe: the diameter of the pipe is relatively thin, the bottom horizontal pipe is too long, the turning angle is too sharp, the slope is not enough, the distance between the lowest horizontal straight pipe and the bottom horizontal pipe of the vertical pipe is not right, and the bend radius of the vertical pipe is too small when turning the horizontal pipe. These factors may lead to insufficient drainage capacity, causing the toilet and floor drain to reverse. 3. Construction waste blockage: During the renovation of second-hand houses, construction waste (such as cement, glue, etc.) may be directly discharged into the sewer pipe, causing the pipe to be blocked, or the sewer pipe of an old house may be used for a long time. Dirt and impurities will stick to the inner wall of the pipe and make the diameter smaller, affecting drainage and causing water to reverse. 4. Inappropriate use by individuals or others: The owner and the property are negligent in maintenance. Large objects and non-decomposed sundries are thrown into the sewer. The kitchen food residue and oil are directly poured into the sewer, causing the main sewer to be blocked and causing water to reverse. The solution was as follows: 1. Simple dredge method - Soda and vinegar: Dissolve soda and vinegar and pour them into the sewer. Then pour in white vinegar and use the effect of their reaction to dredge. - Dredging with logs: Prepare a round wooden stick similar to the size of the pipe and insert it into the pipe. Put in enough water and pull the wooden stick. - Water pipe dredging: Directly insert the water pipe into the floor drain and use water to flush the stains in the pipe. - "Clean the toilet bowl: Use the toilet bowl to suck at the sewer pipe and suck a few times repeatedly to clear the blockage. - Blockade: Use a wet cloth to block the entrance of the sewer pipe, and then use a chisel to clean the dirt in the pipe. - [One Gun Clear: Use the One Gun Clear divine artifact. After adding water, follow the instructions to clear the air.] 2. professional treatment - If the above methods do not work, or the blockage is serious, you should contact a professional sewer technician to deal with it. 3. precautionary measures - Pay attention to daily maintenance, avoid throwing large objects and non-decomposed sundries into the sewer, and dispose of kitchen waste reasonably. - Some preventive measures can be taken at the bathroom floor drain, such as using wire balls, stockings or special floor drain mats to prevent hair and stains from falling into the pipe. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What is the reason for the toilet flushing floor drain to be reversed?
How to disassemble the submarine floor drain?
The dismantling method of the submarine floor drain is as follows: 1. If the floor drain is directly embedded, you can directly take out the cover plate and filter net, and then rotate the floor drain core counterclockwise to take it out. 2. If the floor drain was fixed with a screw, you would need to use a Screwdriver to unscrew the screw and then take out the floor drain core. 3. You can also aim the screw at the side of the floor drain and slowly pry it open. Then use a chisel to chisel away the cement next to the drain pipe. Then use a rag to wrap the drain pipe to prevent debris from falling into the pipe and causing blockage. Finally, take out the inner core of the floor drain. 4. If it was a water-sealed floor drain core, the round cover in the middle of the floor drain could be opened and the floor drain core could be hooked out with iron wire. The novel " Flood Dragon " is equally exciting. Everyone is welcome to click and read it!
Basement floor drain in rainy season
What is the cause of the kitchen floor drain
The kitchen floor drain was usually caused by the following reasons: 1. ** Blocking factor ** - ** Residue accumulation **: When cleaning kitchen items or ingredients, the residue or waste may block the floor drain, causing the sewage to be unable to be discharged smoothly, resulting in the phenomenon of water reversal. - ** Sewer pipe blockage **: If the water from the floor drain has dirt and an unpleasant smell, it is likely to be caused by a blockage of the sewer pipe. 2. ** Pipeline-related factors ** - ** The diameter of the water pipe is too small **: When the diameter of the water pipe is too small and cannot reach the required drainage capacity, water will come out from the floor drain. - ** Water pipes used together **: This situation usually occurs in the bathroom, but there may be similar situations in the kitchen. For example, multiple drainage devices share a pipe. When the pipe cannot withstand the water flow, the water will overflow from the floor drain. 3. ** Air pressure difference factor **: When the sink is higher from the floor drain or the sink is directly connected to the sewer without a bend, the waste gas and sewage may be discharged from the floor drain together when the pressure difference between the upper and lower is large. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to solve the problem of the floor drain in the building
The floor drain of the building can be solved by the following methods: 1. ** Regarding blockage of drainage pipes ** - If you suspect that the sewer pipe is blocked, you can first use the method of draining it. First, continue to flush the floor drain, then use the U-shaped iron wire to extend into the floor drain and rotate it continuously to spin down the blocked foreign matter, and finally wash it away with clean water. You can also use a physical cleaning tool such as a pipe cleaner or a water pressure toilet dredge to insert it into the drain and unblock the blockage by rotating or pushing it. Or you can buy a pipe dredge, pour it into the floor drain according to the instructions, and wait for a while before rinsing the pipe with water. However, wear gloves and masks when using chemical cleaners and follow safe usage methods. - The pumping method could also be used to dredge. Prepare a pump, put the rubber tube of the pump into the drain pipe of the floor drain, seal the surroundings of the floor drain, put in enough water, and then pump air into the floor drain to dredge the sewer. - He used a mixture of vinegar and baking soda to clear the drain. First, he poured baking soda into a bowl, then added vinegar and a small amount of water. After mixing it well, he poured it into the drain. 2. ** Floor drain filter related ** - Clean up the floor drain filter because the floor drain filter will accumulate dirt and debris over time, resulting in poor water discharge or even water reversal. Remove the floor drain cover, take out the filter, clean it with water or cleaner, and then install it again. 3. ** Equipment installation related ** - Add a floor drain reverse valve, remove the floor drain cover plate, and install the floor drain reverse valve device into the floor drain to ensure that the valve can be flexibly opened and closed, effectively preventing sewage from flowing back. 4. ** Damage to drainage pipes ** - If the drainage pipe was damaged and caused the floor drain to reverse, it was best to have a professional pipeline maintenance personnel repair or replace the damaged part after checking the damage. 5. ** Daily maintenance related ** - Clean the floor drain regularly, remove the floor drain cover every once in a while, and clean the inside of the floor drain to remove dirt and debris, which can effectively prevent the floor drain from turning back. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Why did the sewer on the first floor turn against the water?
The sewer on the first floor could be flooded for the following reasons: 1. Damped or frozen pipes: The first floor is prone to moisture. Under certain circumstances, the pipes may freeze (such as when the temperature is low and the occupation rate is low), which will affect the discharge of water and lead to water reversal. 2. Blocked pipe: - Falling into a foreign object or a mistake in the installation of a new pipe could cause a blockage. - After the sewer pipe was used, it would scale up, causing the inner diameter of the pipe to become thinner and affecting the discharge of the sewage. - The main pipe was blocked. The main sewers on the first to seventh floors were more likely to be blocked. The blocked position was usually at the 90-degree turn from the sewer cover to the first floor. - Upstairs residents threw large objects that were not easy to decompose into the toilet, such as sanitary napkins, big bones, etc., which might block the part connecting the sewage well and the thick horizontal pipe, or corrode the pipe and make its diameter thinner, which would cause the water on the first floor to reverse. 3. The problem with the drainage system: If the floor drain returns water, it may be that the drainage pipe is not smooth, and the sewage will flow back to the floor drain closest to the blockage point. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Submarine floor drain official service phone number
The official service number for the submarine floor drain is 400 - 657 - 1282. The service time is from Monday to Sunday 9:30 - 17:30. The novel " Flood Dragon " is equally exciting. Everyone is welcome to click and read it!