How to take photos of lighting products
The following are some of the key points for taking photos of lighting products: ** 1. Lighting arrangement ** The placement of the lights was the key decision. The main lights and the fill light had to be placed. ** Second, avoid reflection and ensure color accuracy ** 1. ** Reflection problem ** - Many products, such as jewelry, metal, glass, etc., have good reflective properties. Their smooth surfaces will reflect surrounding light, interfere with lighting settings, and cause shadows. To prevent the product from reflecting and distracting the viewer, you need to carefully observe and think, and be prepared to move the light along multiple angles until you find the ideal position to avoid reflection. 2. ** Color accuracy problem ** - In any type of product photography, accurate color is very important, because many customers buy products based on the color shown in the product picture. Due to the different color calibrations of each person's screen, the colors observed on the phone, TV, or laptop may be different. Make sure to use light bulbs and flashes that emit true white light (phototoning lamps) so that they don't cause color distortions, such as blue or green fluorescent lights, orange shadows in warm light, and so on. ** 3. Special product shooting techniques (such as luminous products)** 1. The camera was stabilized on the tripod. 2. The aperture was opened to the maximum. 3. The shutter was adjusted according to the brightness. 4. White Balance used the "cloudy" mode. 5. The background should be a black cloth that absorbs light. ** 4. Lighting Selection and Usage ** 1. You can choose a photography lamp like the Jinbei P80 photography lamp that has a certain power (80W), soft light adjustment, and long battery life, which can improve the brightness and brightness of the shooting. 2. For example, when shooting a person's makeup, two shields could be used to illuminate the background, and a spotlight could be used to illuminate the person's face in front of the person. 3. You can also use a small solar lamp to create a warm color tone, and add a cold light source to achieve a color contrast effect. For example, when taking a product photo, you can use the live light outside the window, and adjust the aperture and speed according to the surrounding light. You can also use the ring light to fill the light. When shooting, you can choose the lamps according to the color effect you want to create (such as the warm color of the sunset). Later, you can simply increase the saturation and brightness of the photo to reflect the color tone you want to highlight. Read more exciting novels for free
Take photos of products on TMALL
How to take photos of metal products
When taking photos of metal products, you can refer to the following methods: 1. ** Light Source Selection and Usage ** - Use soft light sources, such as soft lights and soft boxes, to evenly illuminate the entire scene and reduce the excessive reflection caused by the strong reflection of metal materials. - Backlighting could be used to place the light source behind the camera so that the light shone on the object from behind. This would highlight the outline and edges of the metal and increase its three-dimensional sense and texture. - Pay attention to avoid too much light and adjust the exposure appropriately to prevent the metal material from producing high light and overexposed to maintain the details of the picture. 2. ** Angular adjustment ** - He adjusted the angle of the light source and the camera to find the best shooting angle to maximize the luster of the metal. 3. ** Avoiding reflection interference ** - Pay attention to the reflective objects in the surrounding environment to avoid affecting the luster of the metal. Pay special attention to not taking pictures of the photographer himself. 4. ** Lighting is based on product features ** - According to the size and structure of the product, the lighting, background, lens, and light were arranged reasonably. He set the color temperature and shooting angle of the light to reach the appropriate sensitivity of the product, thus reflecting the texture of the metal product. 5. ** Solve the reflection problem ** - Use a soft box or soft paper to reduce the reflection of light on the surface of the product. 6. ** Selection of background ** - Choosing a color background that had a strong contrast with the product could better highlight the product in the picture, allowing the audience to clearly understand the material, color, and shape of the product. 7. ** Special considerations for shooting product promotional videos (if it is to produce promotional videos)** - If it was a promotional video for a metal product company, in addition to focusing on the product itself, it could also add corporate culture elements, such as the cultural content, development status, future vision, etc. of the company. However, if the film was to be displayed on an e-commerce platform, it was necessary to understand the video upload rules of the platform, because some e-commerce platforms had restrictions on the corporate culture elements in the product video. At the same time, he had to focus on the product and highlight the product. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to take photos of small products
Here are some ways to take photos of small products: 1. ** Equipment preparation ** - ** Shooting Equipment **: You can choose a full-frame or half-frame camera. It is recommended to start with a 24 - 85mm focal length zoom lens. This can satisfy many types of shooting. As most small products need to be shot clearly, a large focal length lens is not very practical. - ** Lighting Equipment **: It is necessary to fill in the light when shooting products. For beginners, the flash system was complicated and costly. It was recommended to buy a few LED fill light, light sticks, and so on. If you wanted to shoot an e-commerce white background map, buying a still life box was a cost-effective choice. - ** Scene Material **: Various texture background papers are very practical. You can also buy some small good-looking objects such as gauze, linen, plates, cutlery, small mirrors, books, etc. to match with the main body according to your preferences to improve the shooting effect. 2. ** Reality Shooting ** - ** Color matching: This is an important part. You have to abandon your previous habits of taking photos. For example, when shooting dark red cherries, it had a good effect with a grayish-black background. This color scheme could also create a retro atmosphere. - ** Pre-shooting preparation **: You can combine the table lamp and LED light stick to supplement the light to ensure that the light is evenly illuminated. Find a suitable platform for shooting, paste the background paper, place the small products that you want to shoot, and use the M file to shoot, manually adjust the white balance, so that it is convenient for mass adjustment later. - ** Adjusting parameters **: If you are not sure how to place the object to look good, you can refer to the still life composition in the sketch. Imagine the shooting space as a long right triangle ruler and put it into the triangle according to the height of the object. - ** Shooting creativity **: Different small products have different attributes and characteristics. You can take more pictures on the photography platform, take more photos and imitate more to accumulate experience and bring forth new ideas. For example, small cups could be used to create a variety of shapes; for small fruit products, in addition to individual shapes, they could also be matched with water, such as using a transparent glass cup to receive water, letting the cherries fall freely from a height and using high-speed continuous shooting to capture. - ** Communicate with the merchants **: You must understand the products you are shooting and grasp the key points of the shooting. After choosing the theme color, choose the appropriate props as soon as possible, check the relevant works online in advance, and make a good idea so that the shooting can proceed smoothly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Take photos to identify foreign products
Here are some ways to identify foreign languages: 1. ** King of Palm Identification **: This is a software for Optical Character Recognition and image to text conversion. First, he installed it on his phone, opened the software, and then selected [Photograph Text Identification] to enter the shooting page. He took the English picture that he wanted to translate, adjusted the recognition frame of the photo so that the English that needed to be recognized was in the frame, then clicked [Identification] to get the English in the picture. Then, he clicked the translation button at the bottom to see the English Chinese translation result. 2. ** WeChat **: Open WeChat, click on the "+" sign on the top right corner of the page, select the [Sweep] function, find the [Translate] function on the right side of the scan and select it. Then, aim at the English content that needs to be recognized and take a photo. You can scan the picture and recognize English as Chinese. 3. ** Translator camera **: This is a free translation software. Take a picture of the text that needs to be translated. The software can automatically recognize and translate it into the required language. It supports multi-language translation. 4. ** Tibetan Translator **: Although the main function is Tibetan translation, it also has popular functions such as image translation. He opened the app and found the " photo translation " function. He aimed at the content that needed to be translated. In addition to Tibetan and Chinese translation, it also supported dozens of popular languages. 5. **Naver Papago**: A powerful photo translation software that supports translation in 13 languages, including Korean, English, Japanese, and Chinese. 6. **iTranslate**: The photo translation function is one of its core functions, and it supports translation in more than 100 languages. The user opened the app and clicked the photo button. The system would automatically recognize and translate the text in the photo. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to take photos of WeChat products
To take good photos of WeChat products, you can start from the following aspects: 1. ** Light usage **: Light is the soul of photography. It is necessary to select suitable lighting equipment according to different environments, adjust the position and angle of the light, and use the light to create a unique atmosphere and texture. 2. ** Basic photography **: - ** Picture composition **: Carefully conceive the layout of the picture to highlight the main body of the product. - ** angle **: Choose a suitable angle to show the characteristics of the product. - ** Use of Light **: In addition to lighting, you should also be good at using natural light to achieve the best lighting effect. 3. ** Item features **: - It was necessary to accurately convey the key points of the product. For example, when shooting metal products, try to highlight the outline and texture of the metal while avoiding unnecessary projections. When shooting clothes, use soft light to highlight the softness of the fabric. Put the product on a certain inclined stage and shoot the entire product vertically from top to bottom. Pay attention to the shooting angle and the position of the item. - The product's characteristics, essence, and various aspects of information, such as texture, appearance, color, etc., were perfectly displayed. This might require a good planner to set up a suitable shooting scene. 4. ** Equipment usage **: Although the photography function of mobile phones is becoming more and more powerful, if you want to pursue higher quality pictures, you can also consider using other equipment. At the same time, you must understand the use of equipment, such as mastering the basic knowledge of lighting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Take photos of products with mobile phones
Here are some tips for taking pictures of mobile products: 1. ** In terms of lighting ** - Light was a key element in photography. It was important to ensure that there was sufficient light but not excessive exposure. If the light was not enough, the photo would be dark, and if the light was too strong, it would be dazzling. - Try to use natural light to take pictures of products. On sunny days, you can use the morning and afternoon sunlight, but avoid direct sunlight (especially white items, which can easily cause overexposed). - If you can't use natural light, you can use artificial light sources such as table lamps and flashlights. However, artificial light was not conducive to shooting when it was too strong. Paper towels, plastic bags, etc. could be used for soft light treatment to obtain better shooting results. 2. ** Outstanding aspects ** - To ensure that the background of the shoot was clean, clean here meant that there were not too many messy elements, so that the goods could be highlighted. The background should not be overwhelming. - By blurring the background appropriately (through the focus action of the phone, rather than the blurring function in the photo retouching software, to avoid stiffness and distortion caused by technical problems), it could not only highlight the main body, but also increase the atmosphere of the photo. At the same time, he had to pay attention to the effect of distance on the focus when the phone was auto-focusing. He needed to adjust the distance manually to ensure that the subject was clearly displayed on the screen before shooting. 3. ** In terms of shooting angle ** - According to the characteristics of the product, choose to shoot from above, flat, or 45 degrees. It would be best to shoot the front, side, back, and other angles of the product. This would allow the buyer to have a more comprehensive understanding of the product's appearance and increase the click conversion rate. For those who were not familiar with composition and the golden ratio, they could try to shoot from above. Placing the subject in the middle of the picture could effectively highlight the product and avoid the imbalance of the picture. 4. ** In terms of post-editing ** - Later retouching could make up for the small flaws in the photo, making the photo closer to the real thing and more attractive. However, there were two misunderstandings to avoid. One was that one thought that retouching was difficult and never retouched the picture. In fact, the current retouching software (such as Xingtu and Meitu Xiuxiu) was easy to operate and could be learned by following the prompts. If you wanted to make the photo tall and uniform, you could use the template on the software. If you only wanted to adjust the lighting and composition, the editing tools on the phone could complete the brightness and contrast adjustment. The second was to overuse the filter. Too many filter would cause the color to change too much, causing the product to be distorted and reducing the customer's trust in the real shot. 5. ** Other aspects ** - You can use all the functions of the phone camera, not just limited to the basic functions. For example, functions such as reference lines, watermarks, HVR, and document correction (if the phone had these functions) would help to take clearer and more layered photos. - Put more effort into framing and composition to avoid problems such as messy backgrounds, unclear main and secondary subjects, and lack of understanding of choices. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How bright is the lighting for photography? It's good to take photos
The appropriate brightness of the photography light depended on many factors, and there was no fixed value. First of all, sufficient brightness could ensure the clarity and texture of the image quality, because the use of light effect accessories (such as soft light box, focusing device, beam tube, sulfuric acid paper, etc.) during the photography process would reduce the light intensity. If the light itself was not bright enough, it might affect the shooting effect. Light intensity had a lot to do with the quality of the photo. If the light intensity was too high, it would lead to overexposed, and the bright parts would overflow, making the picture white. If the light intensity was too low, it would lead to underexposed, and the dark parts would be completely dark. Therefore, the appropriate brightness was the brightness that could achieve the correct exposure. The photographer could control the light intensity entering the lens by setting the aperture size, shutter speed, and the sensitivity level of the camera to adapt to different shooting scenes. In addition, different shooting scenes and subjects would also affect the brightness requirements. For example, when shooting portraits, one needed to adjust the light intensity according to the desired effect (such as showing three-dimensional sense, avoiding flat faces, etc.); when shooting blue sky and white clouds, a specific light intensity might be needed to obtain better color saturation. In short, the appropriate lighting brightness needed to be adjusted according to the specific shooting needs and environment. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Food, photos, lighting
The following are some key points for taking photos of food: 1. [Fairing light: The light in the same direction as the camera is fairing light. This kind of light will make the subject have no obvious light and dark changes. It lacks layering and three-dimensional sense. It is rarely used in food photography.] 2. ** Top Light **: When the light shines from the top of the food, it is the top light. The top light will cause vertical shadows and affect the beauty of the food. It is generally not recommended to be the main light. However, in the overhead shot, the object itself has more details or the light is slightly angled. It can be used to capture the texture of the food. 3. ** Footlight **: The footlight is illuminated from the ground. It is usually not used for food photography. However, to show the fresh and tender texture of fruits and vegetables, fruits and vegetables can be placed on a professional shooting platform that can be transparent. The scattered light is used as the main light, and the footlight is used as the supplementary light to show the translucent crystal effect and enhance the texture and three-dimensional feeling. 4. Backlight: When the light source shines from the backlighting direction, it is backlighting. This kind of light has a strong artistic sense and expressiveness. It can create bright and transparent outlines for food. It is a commonly used light in food photography. 5. ** Front Light **: It has a certain three-dimensional effect and can better highlight the main form. When shooting food with light colors such as rice or noodles, it can capture bright grains. It is also suitable for shooting food and still life details. You could also use a three-point lighting method, such as using a high-power movie lamp with a fast-loading strip-shaped soft box as the main light, placed on the right front side of the lens to highlight the layering of the food, and matched with a grill to control the light; using a movie lamp with an controllable color temperature to arrange on the left back of the table, matched with a beam tube to produce a hard backlight to outline the outline light; and then using a reflective plate to supplement the dark areas where the food area could not be illuminated. For photography enthusiasts who had not been in contact for a long time, they could use LED cloth lamps for lighting. Commercial gourmet photography would use flash for shooting, and they could also use flash and continuous light source to create lighting effects. In addition, according to the characteristics of the food to be photographed, various props should be considered, and the appropriate focal length of the lens should be selected. For example, to show the exquisite details of the food, a macro lens was usually used to shoot close-ups. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How do you take photos of small products standing up?
Here are some tips for taking photos of small products: - Equipment: - It was possible to choose a full-frame or half-frame camera. It was recommended to start with a 24 - 85mm focal length zoom lens. This kind of lens could be used for a variety of shots, because most small products needed to be clearly presented as a whole. Large focal lenses were not very practical. If you were a student, self-employed, or just started a photography related job and had a limited budget, you could also choose the lowest price or even second-hand shooting equipment. If you had a sufficient budget, you could buy the best equipment within your ability. For light replenishment, if it was a beginner, the flash system was complicated and costly. They could buy a few more LED fill light, light sticks, and so on. If he wanted to shoot a white background map of an e-commerce company, he could just buy a still life box. It was cheap and easy to use. In addition, you can also use a table lamp or an LED light stick to fill in the light. - ** Pre-shooting preparation **: - Choose a suitable background. A variety of texture background paper is more practical. It can also be matched with some small items such as gauze, linen, plates, tableware, small mirrors, books, etc., but pay attention to matching them appropriately. At the same time, he had to find a suitable platform for filming, paste the background paper, and place the small items on the table. When shooting, it is recommended to use the M file to shoot and manually adjust the white balance to facilitate the batch adjustment later. - ** Composing and Shooting **: - You can imagine the shooting space as a long square triangle and use the still life composition method in the sketch. Pay attention to the light evenly illuminating the main body of the small commodity. You can adjust the angle and output of the light, such as using a constant light bulb (if there is one) to find the best light distribution angle. You can also activate multiple lights and adjust the light ratio and light distribution angle between the lights to achieve the desired effect. For example, the left light was used to create an atmosphere, while the right light was used to light up a small area of the object. If there was enough light, a better photo could be taken without the need for light filling equipment. Generally, the effect was better on sunny days, indoors and outdoors. When the light was insufficient, the light should be filled. The photo taken with too much light was not ideal. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Lighting arrangement inside the studio for small products
The following methods can be used for lighting arrangements in a small product studio: 1. ** Main light arrangement **: The main light is the most important light in the studio. It plays a role in shaping the subject, so the main light must be arranged first. 2. "Setting up the auxiliary light: The auxiliary light and the main light form a light ratio. After the main light is set up, the size of the light ratio is determined by the auxiliary light. This concept is critical to the success of the shoot. 3. ** Backlight arrangement **: Depending on the subject and the color of the background, you can choose to use the backlights (the lights that shine on the background) or not. 4. ** Contour light arrangement **: Contour light is generally backlit, about 135 degrees from the camera lens axis. It is usually shot on the back of the subject to give the subject a certain sense of contour. 5. ** Lighting arrangement **: This kind of lighting is usually arranged with a beam of light. The shooting range is small and the shooting angle is small. When shooting people, it can play the role of highlight (although this is a product studio, the decorative light can also be used to highlight some local features of the product). 6. ** Other arrangements **: If there are special requirements, such as special materials or texture on the surface of the product that needs to be emphasized, you can also consider adding other special lighting arrangements. For example, for products with strong reflective properties, you may need to add polar mirrors or use special reflective plates to control the light reflection. At the same time, attention should be paid to avoid creating too many shadows or reflecting light spots to affect the display effect of the product. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>