How to deal with the post-production of color photography to look better
Here are some ways to make color photography look better: ** 1. Illumination and contrast adjustment ** 1. ** Exposing adjustment ** - If you want the photo to be brighter, you can increase the exposure, but you have to be careful not to overexpose it and cause the picture to lose details. For example, in Japanese style post-processing, increasing the exposure could make the photo brighter. In order to highlight a specific subject (such as a glowing object), it may be necessary to lower the exposure. For example, in some night photos, lowering the exposure can highlight the main body such as lighting. If the exposure is raised, the elements outside the main body will be too bright and cover up the main body. In the ancient style of processing, a moderate reduction in exposure (such as setting the exposure to-0.3 to-0.5 in Adobe lighthouse) can make the image appear dim and add a sense of history. 2. ** contrast adjustment ** - Lowering the contrast could make the color of the photo softer and avoid too strong color contrast. However, in some cases, such as when the picture was not transparent enough, the contrast could be increased appropriately, and the gray in the middle of the picture could be suppressed to increase the brightness ratio of the picture. For example, in the ancient style processing, the contrast can be set to +5 to +10. ** 2. Color saturation and brightness adjustment ** - Lowering the saturation can make the color more elegant. For example, in the post-processing of the ancient style, you can set the saturation to-10 to-20 and the vibrant color to-5 to 0 in Adobe lighthouse. However, if he wanted the color of the picture to be richer, he could increase the saturation. ** 3. Illumination, shadow, black and white adjustments ** - When processing photos, you can increase the highlight to affect the brighter areas of the picture, or you can increase the value of the white bar. At the same time, suppressing the black and shadows can highlight the bright areas in the picture, but you must pay attention to avoid over-suppressing the shadows, causing the middle gray to be greatly suppressed and causing the details of the picture to be lost. For example, when the main character was highlighted, it could be achieved by darkening the shadows, but it had to be adjusted locally to prevent the overall effect of the picture from worsening. ** 4. Color temperature and tone adjustment ** - A slightly warmer color temperature could give people a warm feeling. For example, in some night photos, warm colors could increase the atmosphere. The color tone could be adjusted in the direction of green. During adjustment, the colors of the screen could be simplified by adjusting the natural saturation, color temperature, tone, and tone. - In terms of color tone separation, the highlight tones could be adjusted to warm colors to create a special visual effect. ** 5. Color mask and hue adjustment ** - In the color splitter, colors other than the main color could be blocked. For example, in a photo with red, orange, and yellow as the main colors, the saturation of green, cyan, and blue could be reduced or even eliminated. He could also adjust the hue of the main colors such as red, orange, and yellow. For example, he could make the red color lean a little closer to orange, and the yellow color would also be slightly adjusted in the direction of orange to make the color look better. ** 6. Alignment and Unification ** - In Lighthouse or PowerPoint, you can perform color correction. For example, in Lighthouse's correction function, you can pull the blue color to the left to achieve a quick unification of the color of the picture, and then pull up the saturation to make the main color (such as orange) more obvious. ** 7. Use the color option command (in Photoshop)** - He found the color option in the layer adjustment menu at the bottom of the layer panel. There were nine colors that could be adjusted. The last three colors, black, white, and gray, could be adjusted for the highlights, shadows, and midtones in the image. For example, to make the red color in the picture redder, one could move the opposite color (cyan) to achieve this. Because red and cyan were opposite colors, reducing cyan was equivalent to increasing red. Read more exciting novels for free
How to deal with the post-production of color photography
Here are some good post-processing methods for color photography: - ** Color adjustment ** - ** Color adjustment option **: You can find the option color command in the layer adjustment menu at the bottom of the layer panel. There are 9 colors that can be adjusted. The last three colors, black, white and gray, can be adjusted according to the highlight, dark part and middle tone of the picture. For example, to make red redder, you could reduce cyan (red and cyan are the opposite colors), or move the yellow and magenta-colored slide bars to the right by the same amount (red = yellow + magenta-colored). The black slide was used to adjust the brightness of the selected color. Moving it to the right would make the color darker and richer, and moving it to the left would make it fresher and brighter. This method could be used to adjust a color individually, and was often used to precisely portray a specific color. - ** Color balance adjustment **: Find the color balance adjustment layer from the adjustment layer menu at the bottom of the layer panel. - ** Hue Saturation adjustment **: click on the "Gesture Symbol" in the interface, and the pointer will move to the picture and become a straw tool to adjust the sample. - ** Natural saturation adjustment **: For example, in the case of the Camera Raw color adjustment, the natural saturation can be reduced as needed to simplify the color of the picture and highlight the main body. - ** Light and shadow adjustment affects color presentation ** - ** Illumination adjustment **: Lower the exposure to highlight the main body of the light in the picture, to prevent the main body from being covered by the bright background. - ** contrast adjustment **: Increase the contrast to darken the gray in the middle, increasing the ratio of light to dark in the picture, making the picture more transparent. - ** Highlight, Shadow, Black, and White adjustment **: Increase the brightness to affect the bright areas of the screen, and increase the white slide bar appropriately. Darken the black and shadow to enhance the layering of the screen and make the main body more prominent. - ** Color temperature and color adjustment **: If you adjust the color temperature to a warm place and the color tone to a green tone, you can change the overall color style of the picture. - ** Special color adjustment ** - ** Use of Color Mix **: In the Camera, you can use the Color Mix to block colors other than the main color, such as keeping red, orange, and yellow to highlight the main color. - ** Alignment adjustment **: If you pull the blue color to the left, you can quickly unify the image to a main color (such as orange), and then increase the saturation to make the main color more obvious. - ** Increases color adjustment related to the image texture **: Increase the texture and clarity in the effect to create a high contrast between the bright and dark dots of the image, making the image clearer. The difference can be used to darken the gray dots near the middle to increase the image texture. During the curve adjustment, the dark parts would appear gray, and the highlights would not be too dazzling. It could also increase the texture of the picture. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to deal with the color problem in the post-production of photography
There were many ways to deal with color problems in post-production: ** I. Color matching basis and direction ** 1. ** Based on aesthetic ability ** - Color adjustment could not be based on feeling alone, because the display was inaccurate and the feeling changed at any time. One had to have their own aesthetic standards and clear ideas before they could have a direction for color mixing. For example, he needed to look at more excellent color mixing works and analyze the color mixing ideas to establish aesthetics. 2. ** Clear purpose ** - If one did not have a clear purpose for toning, it was easy to get lost. For example, they might feel that the color adjustment effect was correct at that time, but after changing the monitor or after a while, they would feel that it was wrong. ** 2. Tools and Operation ** 1. **Camera Raw (Photoshop plug-in)** - In the post-production process of photography, when it came to exposure and toning, learning the Camera Raw could solve 80% of the problems. For example, when dealing with a photo with a signboard, light box, or a moving vehicle, you can reduce the exposure to highlight the light and other luminous objects, because raising the exposure will make the main body covered by the surrounding buildings and ground. If the picture is not transparent after lowering the exposure, you can increase the contrast appropriately and darken the middle gray to increase the contrast of the picture. He adjusted the color temperature to make it warmer, and the color tone to be green to reduce the natural saturation. You can also block colors other than the main color in the color splitter, such as retaining the three colors of red, orange, and yellow (when the main light box advertisement is composed of these three colors), adjust the hue of these three colors to make it more beautiful, unify the color of the picture and increase the saturation to make the main color more obvious, and increase the texture, clarity, and difference in the effect to make the picture more realistic, and fine-tune the dark part, highlight, and overall contrast in the curve. 2. ** Colors to choose (adjust the layer with Photoshop)** - It could be found in the color adjustment menu at the bottom of the layer panel. There were nine colors that could be adjusted. Black, white, and gray could be adjusted according to the highlights, shadows, and midtones of the image. For example, to make the red in the picture redder, move the cyan slide to the left (because red and cyan are opposites), or move the yellow and cyan slide to the right according to the color mixing formula (red = yellow + cyan). The black slide could adjust the brightness of the selected color. Moving it to the right would make the color richer and darker, and moving it to the left would make it fresher and brighter. This tool could be adjusted individually for a certain color in the picture, and was often used for fine carving of certain colors. 3. ** Color balance (adjust the layer with Photoshop)** - It could be found in the layer adjustment menu at the bottom of the layer panel. By adjusting the color balance, the color of the picture could be changed. 4. ** Hue Saturation (Photoshopped)** - Usually, he would click on the "gesture symbol" in the interface, move the pointer to the image, and change it into a straw tool to adjust the sample. 5. ** Antique style photos (Adobe lighthouse)** - In terms of saturation, he reduced the saturation to-10 to-20, and the brightness to-5 to 0, so that the color was light and not intense. - In terms of color separation, the highlight tones were adjusted to +5 to +15 to make it warmer, and the shadow tones were adjusted to-5 to 0 to make it colder. - You can also adjust the exposure (reduce it appropriately, such as-0.3 to-0.5), the contrast (increase it slightly, such as +5 to +10), add graininess (grain amount +5 to +10, size 5 to 10, coarseness 0 to +5), and slightly adjust the clarity (but not too high) to create a classic charm, delicate color tone, and nostalgic feeling. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Post-production photography of the stairs
The following are some common operations in the later stages of staircase photography: 1. ** Tune adjustment **: You can adjust the tone in ACR (Adobe Camera Raw), such as increasing the dark details and white brightness, while reducing the contrast to make the picture more uniform and bright. 2. ** Secondary composition and trimming **: You can re-compose the picture in PS (Adobe Photoshop), trimming and rotating the excess parts to find a suitable layout structure. 3. ** Color adjustment **: - If the original photo in the RAW format was dark yellow and gray, if you wanted to achieve a transparent glass texture, you could first remove the color and then color it, adjusting the image to a grayish blue and a little purple. - For photos of stairs taken with mobile phones, you can use color adjustment parameters such as filter-La La Land + milk green, brightness-10, light perception-15, shadow-10, saturation +10, sharpening +15, structure +10, color temperature-10, fade +10. - When dealing with portraits and stairs, you can import the "Wake Up" APP and adjust the brightness, contrast, and other parameters of the picture in the "Adjusts" section. You can also choose the appropriate filter stack in the "filter" to adjust the color tone. For example, first select the "Pear Cloud" level in the "Landscape" to adjust to 38, then stack the "GT3" filter level in the "Film" module to adjust to 24, and then continue to stack the "KCP2" level to adjust to 53. 4. ** Details processing **: Spend time to repair the stains, uneven arrangement, and excess parts of the wall and spiral staircase in the image with tools such as masks, imitation, and filling brushes; brighten the soft light of the spiral staircase to make it more transparent and comfortable, and at the same time, slightly contrast it with other parts. 5. ** Denoise and Sharpen **: Denoise the entire image and perform high-contrast sharpening to improve the image quality. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Solo photography and post-production
Single-lens photography referred to photography using a single-lens reflex camera (such as the Nikon D800). The post-production process was the process of processing the photos after the filming was completed. In stand-alone photography, the photographer needed to consider factors such as composition, light, color, and so on to obtain the ideal original photo. For example, he had to choose the appropriate aperture, exposure time, and focal length according to the shooting scene. Post-processing was very important to the results of stand-alone photography. First of all, post-production helped to adjust the exposure. If you adjust the exposure after toning, the color will change due to the change in exposure, causing the previously adjusted color to change. Therefore, it is usually better to adjust the exposure first to better display the details and colors of the picture. Secondly, color adjustment was also an important part of the post-production process. Whether it was in the format of JPG or RAW, or photos taken with a mobile phone or camera, there might be color cast problems. Proofreading the color cast and adjusting the color according to the theme of the photo (such as making the food photos warm to increase appetite) was the main content of the post-production color adjustment. In addition, making local adjustments to the details of the photo could improve the beauty of the photo. Some retouching software had features such as masks, parts, and brushes to achieve this purpose. Finally, the second composition was also a part that might be involved in the later stages. However, in order to avoid damage to the image quality and repetitive work, the accuracy of the composition in the early stages also needed to be paid attention to. In summary, stand-alone photography and post-processing complemented each other. The stand-alone photography provided the original material, while post-processing could improve the quality and expressiveness of the photos. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What to do in the post-production of photography?
In the later stages of photography, one could start from the following aspects: - Color adjustment: - The color tone was unified to turquoise and the saturation was reduced. - You can add blue and green color temperatures to the photo to give it a bluish hue. At the same time, you can increase the exposure, reduce the black, increase the shadow, and increase the clarity to make the photo more transparent. When you operate the curve, you can reduce the brightest and increase the darkest in the black and white curve. Add a little green to the bright part of the green curve, and add a little blue to the bright part of the blue curve to give it a bluish hue. - In the color adjustment section, the red color in the hue was changed to orange, increasing the orange-red-blue saturation, reducing the green saturation, increasing the red-orange-yellow lightness, changing the green color to cyan and increasing the blue saturation of the picture. In the adjustment section, the red primary color, green primary color, and blue primary color were added (such as the red primary color increased by 6, the green primary color increased by 50, and the blue primary color increased by 14) to increase the saturation of the three primary colors to make the picture more natural. - In terms of light management, pay attention to controlling the facial light. For example, when taking photos in the bamboo forest, the facial light that may be reflected as yellow-green should be adjusted well. - Color unification: For example, when shooting the castle in late autumn, the yellow leaves and the castle's colors were unified to make them visually echo each other. The sky and water were added with a bluish hue to increase the contrast between cold and warm colors to render a cool atmosphere. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the free photography post-production software?
Here are some free post-production software: - Lighthouse: A powerful and intuitive photo editor. It's a good free photo editing and filter software. - Snapseed: This is a very powerful image processing tool that can easily process many images. It also has an auto-correction function that can make the image look more vibrant without damaging the image quality. - [Wake Up: An excellent photo retouching tool for mobile phones. It performs well in beauty, acne removal, skin polishing, face thinning, and other effects.] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
About the enlightenment and harvest of post-production of photography
Does the international photography award allow post-production?
Different international photography awards had different rules for post-production. Some competitions allowed the use of certain methods to enhance the performance of the photos without changing the nature story, picture content, and original scenery content contained in the original work. These methods included HVR (high dynamic range image), depth of field synthesis, fade/deepen technology, and also allowed the removal of the effects and elements caused by the camera, such as removing dust, digital noise, and film scratches. In certain competitions, such as the documentary category, moderate photo processing was allowed, but it could not be excessive post-production or beautification of the work, causing the real situation of the shooting scene to be lost. There were also competitions that stipulated that photos could be processed appropriately, but the original appearance could not be changed. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to write about the insights of post-production photography
The following are some thoughts on post-production photography: ** I. Understanding the importance of post-production photography ** The post-production stage was crucial in the entire photography system. As the master of landscape photography, Ansel Adams said,"Shooting is composing music, and post-production is performance." It was a supplement and sublimation to the pre-shooting. Different types of photography depended on the post-production to a different extent. For example, in landscape photography, the proportion of shooting and post-production was 50 - 50, because the camera could not fully display the rich effects seen by the human eye, and the post-production needed to restore the scenery according to the natural color change law. Art photography post-production could be freely adjusted according to the imagination on the basis of ensuring the original film. Commercial photography post-production accounted for a large proportion, up to 70% - 90%. As for documentary photography, sports photography, portrait photography, and ecological photography, they used as little or no post-production as possible to restore the original appearance of things. ** 2. Comprehension of post-production techniques ** 1. ** Adjusting exposure ** - This was an important step in the post-production process. You couldn't adjust the color first before adjusting the exposure. Otherwise, the previously adjusted color would change due to the change in exposure. If the photo had a large contrast between light and dark, such as a photo with a large contrast between the sky and the shadows of the building, the exposure needed to be adjusted first. For example, in Snapseed, the "RAW development" tool could be used to increase the exposure, reduce the highlights, and enhance the shadows for the RAW photo. For the JPG format photo, the "adjust picture" tool could be used. The degree of adjustment could refer to the Histogram or visual experience. 2. ** Color adjustment ** - No matter what format or equipment the photos were taken with, there might be color cast problems. It was necessary to check the color cast. At the same time, the color adjustment should be used to strengthen the theme expression service. For example, the food photos should be adjusted to warm colors to increase appetite. In the software, you can use tools such as saturation, white balance, curves (such as snapseed), hue/saturation, color balance, and tone separation (such as MIX) to adjust the color. 3. ** Adjusting Details ** - After the overall adjustment of the photo, if you want to make it more beautiful, you need to adjust the parts separately. For example, Snapseed's "local","brush", and mask functions allowed most tools to adjust parts of the photo. 4. ** Second composition ** - Take Snapseed as an example. Tools like "Clipping,""Rotation,""Perspective," and "Unfold" could be used for secondary composition. For novices, putting the second composition at the back could avoid repetitive work, but experienced people could also do it in advance, but they should be aware that trimming the photo would damage the quality. ** 3. Experience of artistic creation in post-production ** 1. ** The adjustment of the transparent color tone ** - The transparent color was the favorite color of photographers and many people. The principle of adjusting the transparent color was to deal with the relationship between black and white (control the contrast between light and dark to ensure that the bright parts should be bright, and the dark parts retain details and contrast) and adjust the color (the color was full, not oversaturated, and the transition was natural). Take a small fresh photo as an example. If the original photo was gray and had no layers, you could first brighten the picture in VR, control the highlights, and brighten the shadows to make the exposure comfortable. 2. ** Focus the image ** - When adjusting the focus of the picture, such as in a photo with heavy shadows and to highlight the character, you can first adjust the overall tone, darken the shadows and black, and slightly reduce the exposure. However, you must pay attention to avoid the large area of the middle gray being over-suppressed and causing the picture to be dirty. Then use local adjustment tools (such as the mask in the camera, brush, etc.) to carefully smear the shadow. When smearing, pay attention to the feather value of the brush to control the edge effect. For the highlight parts that are accidentally smeared (such as the character hat), you can correct them by deducting. ** 4. Thoughts and gains on the overall post-production of photography ** Post-production was a process of continuous exploration and accumulation of experience. It was not only the application of technology, but also an extension of artistic creation. In the post-production of different types of photography, technical means should be used flexibly according to the purpose and subject matter of the shoot. A balance should be found between restoring reality and artistic creation. Through post-production, one could better express their understanding and feelings of the subject, making the photos more infectious and expressive. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to write about the feelings of post-production photography
Here are some thoughts on post-production: ** I. Understanding the purpose of post-production of photography ** 1. ** Perfect the pre-filming ** - It was difficult to achieve perfection in the early stages of shooting. Whether it was light and shadow, such as in an environment where the shadows were alternated between light and dark, it was easy to appear that the dark parts were under-exposed and the bright parts were over-exposed or the photos were gray. In portrait photography, it was difficult to ensure that the light and shadow of each photo were just right due to the time limit of the model's state and the change of the outdoor lighting. Colors were also difficult to accurately replicate. For example, the color of the sky might not achieve the desired effect when a normal character was exposed. Moreover, there might be objective flaws or aesthetic flaws in the photo, such as excess objects or uneven horizontal lines. Post-production was to adjust the small problems that existed in the early stages of the shoot to make the photos closer to the ideal state. 2. ** Realizing creative ideas ** - Post-production was an important way for photographers to express their aesthetic preferences and ideas. For example, for the same group of photos, they could choose to keep the original color or process it into a black and white style. They could adjust it to a warm tone, a cold tone, or a contrast between cold and warm colors. These were all ideas for the final effect after the shooting was completed and realized through post-production. ** 2. Comprehension of post-production in different types of photography ** 1. ** Landscape photography * - In landscape photography, it was difficult for cameras and mobile phones to achieve 100% WYSIWYG. The rich visual nerves of the human eye often made it impossible to completely restore the scenery after shooting. This required the restoration of the scenery at that time according to the law of color changes in nature. The proportion of shooting and post-production in landscape photography was half and half, and the two complemented each other. 2. [Art photography] - In the field of art photography, as long as the original film was kept, the creator could freely adjust it in the later stages. Art photography allowed the creator to be unrestrained and add his own ideas to the original film to form a unique work. For example, the effects of the characters floating in the air and leaping in creative photography were all forms of artistic expression and should not be simply regarded as fraud. 3. ** Commercial photography ** - The post-production of commercial photography took up a large proportion, with 70% to 90% depending on post-production. Although most photography enthusiasts didn't have much contact with it, it also reflected the importance of post-production in commercial photography. 4. ** Post-production types such as documentary photography ** - The documentary photography, including news documentary, street photography, etc., was mainly to restore the original appearance of the incident and the true reaction of the relevant people and things. There were also sports photography, portrait photography, and ecological photography that didn't require too much post-production. This type of photography focused more on capturing the authenticity of the moment. Too much post-production might go against its original intention. ** 3. Understanding of the relationship between the fun of photography and post-production ** 1. ** The fun in the early stages of shooting and the balance in the later stages ** - The fun of photography was completely different from the experience of editing in the early stages. The early stage of the shoot could bring about discovery, waiting, and finally the satisfaction of taking a satisfactory photo. For example, the sense of accomplishment of waiting for an hour or two in a place to take the photo you wanted. Over-reliance on post-production might make the photographer lose this pleasure and even hate photography because post-production retouching was relatively boring. Therefore, he should balance the pre-production and post-production. He should try his best to shoot well in the pre-production, and use less in the post-production as a means to remedy the shortcomings of the pre-production. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>