Jade Carved with a Carving Knife
The following is some relevant knowledge involved in carving jade with a carving knife. In terms of carving techniques, there were several common techniques related to carving: - [Line carving: This is the most basic one.] The sculptor used a carving knife to show the pattern on the surface of the jade. However, this technique seemed to be basic, but it was not easy to master. To use extremely thin lines to perfectly present the pattern on the jade, to achieve richness and layering, it would take years of practice to grasp the essence. - [Thin carving: When carving with a carving knife, the depth is relatively shallow. Most of the lines are very shallow, just like drawing on paper with a pen.] This technique required the sculptor not only to understand calligraphy and seal carving, but also to understand the principles of painting. Only in this way could the jade be artistic. - [Concave carving (Yin carving): Using a carving knife to carve a downward concave pattern on a flat surface. This technique tests the proficiency of the carving craftsman in the carving knife technique, as well as the proficiency in the control of the lines and depth. It is a very testing skill.] From a historical point of view, jade carving had a long history, which could be traced back to the Stone Age. It had different characteristics in different dynasties. In the development of the carving process, the carving knife had always been an important tool. From the early simple jade products to the later complex and exquisite jade articles, the carving knife carving technology continued to develop. In terms of artistic value and evaluation, the value of a work carved with a carving knife could be evaluated in terms of meaning, creativity, color, finesse, strangeness, and so on. In terms of meaning, the content of the carving was required to have an auspicious and beautiful cultural heritage; the creativity was reflected in excavating the bright spots according to the characteristics of the material and avoiding the shortcomings; the beautiful color and clever carving were the intuitive standards for evaluation; the fine work involved the degree of craftsmanship and the handling of defects; the strangeness was aimed at the special aspects of the jade material itself and the artistic level after the craftsmanship. Read more exciting novels for free
Jade Carving
There were many forms of jade carvings. From the material point of view, there are ice jade, natural Xiuyan jade, Qinghai green material and so on. Among them, the ice jade box was made of high-quality jade. It was crystal clear and translucent. Although it was not big, it was small and exquisite. The design implied happiness and good fortune. The top half was skillfully colored, and the emerald green gradual change was carved into winding vines. There was a pair of quails on the vines, and there was a goldfish inside the box. They symbolized good luck, living and working in peace, having more than enough money every year, and being filled with gold and jade. Furthermore, the hollowed-out carving details were meticulous, carving a lifelike shape on a small jade material. The jade carvings made of green jade from Qinghai were like small praying mantises made of green jade. The jade was soft and delicate, bright and moist, well-proportioned, clean and refreshing. The overall perfection was high. After the new national standard of Hetian jade added the color of green jade, Qinghai green jade became the new favorite of players. Its green color fullness was balanced with the brightness of white jade, and it was a good material for beautiful carving. In terms of meaning, goldfish were homonyms for "gold and jade", so jade carvings with goldfish elements were often given the meaning of "gold and jade". There were also a variety of jade carvings related products on the market, with different prices, such as imitation purple mica-carved round pendant, natural Xiuyan jade stone, creative office decoration, goldfish jade pendant, etc. The novel " Gilded Palm " is equally exciting. Everyone is welcome to click and read it!
Nuwa Jade Carving
Nuwa's jade carving could be described from the following aspects: - [Design Concept: When carving Nuwa jade, one must follow the principle of "figure integration". According to the shape, color, texture, cracks, flaws, etc. of the jade raw material, a feasible process concept should be carried out.] For example, there was a piece of jade that was bright and smooth in color, and the top part of it was green. According to this feature, the picture of Nüwa mending the sky could be designed, emphasizing the green part to reflect the fearless spirit reflected by Nüwa mending the stone. - ** Production process **: - Drawing: Drawing on the jade is the first step. Draw the corresponding pattern on the jade according to the design concept. - Cutting and positioning (stabbing): Use a thallium-based piece to cut off the excess parts, so that the corresponding surface appears on the surface of the jade. This is the key process of jade carving production. From the raw material to the accurate appearance of the image, it mainly depends on this process. - ** Carving Details **: For example, when carving the jade carving of Nüwa, the lower left part of the initial idea was to carve the front and back of the dragon circling. In practice, it could be changed into waves, symbolizing Nüwa's brave and fearless spirit of leaping over the sea and standing between heaven and earth. Next was the fine blank (finding the fine) process, which used the hook to carefully engrave the fine details of the character's image, such as outlining the obvious creases such as the folds of Nuwa's skirt and hair, and then refining the engravings to make the bumps and joints complete and smooth. - ** Polishing and Grinding (Roughening)**: The surface of the semi-finished jade carving will be polished to be more delicate, and then the leather will be dipped in polishing powder to brighten it. - ** Cleaning **: After cleaning the jade, it can be shipped to achieve the effect of value for money. While waiting for the TV series, you can also click on the link below to read the classic original work of "Dafeng Nightwatchman"!
Jade Laser Carving
Jade laser engraving was a type of laser engraving, which used laser equipment to engrave jade. Before processing, preparations had to be made, including the preparation of materials and the adjustment of equipment. When preparing the materials, it was necessary to select the appropriate jade raw materials and carry out pre-treatment such as cleaning. The equipment adjustment should be based on the characteristics and requirements of the jade, select the appropriate laser equipment and tools, and adjust the laser power, speed, frequency and other parameters to ensure normal operation. Then, it was image processing. The design, modification, and adjustment of the patterns or text to be laser engraved were then converted into a format that could be recognized by the laser equipment using professional software to ensure that the details such as the patterns and font of the laser engraving were clear. After that, the jade was positioned and carved. The jade was placed in the correct and stable position of the laser engraving machine, and the machine was started to carve according to the designed pattern or text. The laser beam etched the required pattern or text on the surface of the jade according to the instructions. Finally, there was post-processing. After the carving was completed, the jade articles were cleaned and trimmed to remove the remaining materials and flaws on the surface. Some jade articles might need post-processing such as painting and polishing to increase their wear resistance and aesthetics. There were two methods of laser engraving: dot matrix engraving and digital cutting. Matrix engraving was similar to high-resolution dot matrix printing. The laser head moved left and right to carve lines made of dots, and then moved up and down to carve a full-page image or text. It was suitable for fine patterns and text engraving. The cutter was carried out on the outer outline of the image. It was often used to penetrate and cut on wood, paper, acryl, and other materials or to mark the surface of various materials. It was suitable for scenes that required precise cutting or marking in jade laser engraving. However, laser engraving technology was basically only used on some low-grade jade. Because of the high temperature of the laser, it was difficult to control the details, and it was easy to cause damage to the jade. Moreover, laser engraving was repeated through a fixed template. It could not be targeted to avoid cracks and wrinkles like manual engraving. Its works might appear stiff. Jade articles of good quality, especially unique ones, were mostly carved by hand, so that they could use skills such as exquisite carving and delicate adjustment. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jade carving restoration
The following are some common methods of repairing jade carvings: 1. [Bonding of fracture]: It is suitable for situations where the jade is broken, and it is not cost-effective to cut it into two, or it cannot be carved again. During the operation, the gem-specific glue was used to re-glue the fracture along the fracture. The fracture was required to be relatively complete and perfectly pieced together. 2. [Gold and Jade Embedding]: This is a traditional technique. When repairing jade, it can be used to connect the broken parts with gold and silver patterns. Not only could it help with piecing together, but it could also hide cracks. It could also give jade articles new patterns. It had a wide range of applications. For example, when jade and white jade bracelets were broken, a gold or silver hoop could be wrapped around the broken ring; for jade with cracks, gold or silver threads could be pressed into the cracks. 3. ** Divide into two (or one piece into multiple pieces)**: The designer will analyze the original shape of the jade according to the damage of the jade, and divide it on the basis of the original after ingenious conception. For example, the broken carving was divided into two or more independent or related small pieces, or the broken jade was divided into multiple independent small pieces through the design and carving of the restoration craftsman. This method could reduce the number of discarded items. The value of the repaired jade was sometimes not lower than the original, but it required a high level of design and innovation ability of the technician, and the workload was also large. 4. ** Re-repair **: Re-create with the premise of covering up and repairing the damage of the jade. The masters of art had many methods to remedy and repair, such as "removing the high to make up for the low","removing the fat to make up for the thin","making up for the bad with the bad","making up for the broken with the broken", etc. A simple re-repair could grind and polish the damaged jades at the edges and corners, but it might affect the proportion and coordination of the original shape. A complicated re-creation of the original work according to the damaged parts was required. This method required a lot of work and was difficult to create. However, if the creativity was unique, the overall effect might be the closest to the original work and the degree of restoration would be perfect. 5. [** Gaps Filled **: Used when the jade pendant is only missing a small piece.] Generally, synthetic resin mixed with chalk powder was applied to the missing parts and modified by sculpting. In order to make the color of the repaired part consistent with the color of the surrounding jade, it would first be ground into powder with the same color of raw materials (such as malachite, lapis lazuli, etc.), or mixed with the same color of raw materials in the filling before filling. 6. Mortise and Tenon Repair: Use the structure of mortise and tenon to repair the jade carving. Choose the appropriate materials and color to achieve a better repair effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jade Mechanical Carving
The mechanical carving of jade was carried out using a specialized jade carving machine. Jade engraving machine was an industry classification of stone engraving machines. It was a new type of numerical control equipment, and its working principle was similar to that of a numerical control milling machine. It could be divided into flat jade engraving machines and three-dimensional jade engraving machines. Its working process is to first use the engraving programming software to convert the content to be carved into the standard G code that the engraving machine control software can recognize, and then make the three axes of the control machine automatically move in a continuous way, thus achieving automatic engraving. It can complete the Yin carving, Yang carving, line carving, embossed and other text or pattern effects on the jade, and is also suitable for jade, jewelry and mold processing. According to the control method, it could be divided into computer controlled jade engraving machine and panel controlled jade engraving machine. The price of computer controlled jade engraving machine was relatively cheap, and the stability of the panel controlled jade engraving machine was higher. According to the hardness and precision requirements of the customer, it could be divided into high and low configuration jade engraving machine. The finished product of mechanical carving of jade had the advantages of saving time and effort, high yield, low cost, and less error. However, the disadvantage was that the product lacked spirituality and couldn't be carved with beautiful colors. The outer shape was basically similar, and most of it was reflected by the technical parameters on the computer. It lacked characteristics. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jade carving beauty
Jade carvings of beautiful women were commonly seen in jade carvings. When sculpting beautiful women, one could design them from the six dimensions of point, line, color, shape, meaning, and rhyme. They could use hollowing, Yang carving, Yin carving, round carving, embossed carving, and other techniques to magnify the beauty of different types of beautiful women. The dots and lines create a delicate feeling, the beautiful colors create a beautiful shape, the shape presents a dynamic feeling, and the meaning adds a mysterious color. The images of beautiful women in different dynasties had their own characteristics, such as Xi Shi's graceful beauty, Wang Zhaojun's sad beauty, Diao Chan's tenacious beauty, and Yang Yuhuan's gentle beauty. It was also reflected in the jade carving works. For example, Shi Zhongwei's creative jade carving studio used Qinghai materials to carve female images of different eras, different clothes, and different identities. They integrated the inspiration of ancient sundial into simple shapes to interpret the understanding of time and beauty. They combined traditional China line drawing techniques with Western anatomy and perspective to make the characters three-dimensional and profound. From an aesthetic point of view, the image of beautiful women in different eras had different aesthetic characteristics. Beauties in the Tang Dynasty paid attention to realism and truthfulness. They were plump and strong, graceful and noble, and their clothes were magnificent. Beauties in the Qing Dynasty revealed the charm of a small family. Beauties in the Republic of China had fashionable curly hair and printed cheongsams. They smiled elegantly and charmingly. Women in the 21st century reflected the characteristics of self-confidence, independence, and generosity. The beautiful women in the jade carvings had various postures. Some were dressed in fluttering clothes, some were gentle and quiet, some were shy and reserved, some were plump and noble, some were beautiful from a small family, and some were amorous. Moreover, the image of a beautiful woman in the jade carvings had the saying of "Jade Noble", which was homonym to "meet a noble". It meant that life had the help of a noble, good luck, and smooth sailing. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jade carving 4D
4D Hetian jade referred to jade that was collected in the Hotan Prefecture through modern technology to perform three-dimensional scanning, digital model generation, and three-dimensional carving. There was a debate about whether 4D Hetian jade was regarded as real jade or fake jade. Some people thought it was real jade, while others did not think so. To distinguish the authenticity of 4D Hetian jade, one needed to understand the physical and chemical characteristics of Hetian jade, its color, and other aspects of knowledge. Combined with the identification of professional appraisal agencies, as well as a variety of understanding and comparison, one also needed to pay attention to the merchant's publicity channels, prices, and so on. One should not easily believe the merchant's promotional phrases such as " absolutely authentic " and " 1:1 simulation ". <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jade Carved Fish Lotus
The meaning of the combination of fish and lotus in the jade carving mainly came from the homophonic method. Fish was a homonym for "Yu", and lotus was a homonym for "Lian". The two together meant "Lian (Lian) Nian Yu (Fish)", which expressed the China people's desire and sustenance for a better life. It was a wish for a rich life and a happy family. For example, it was popular to eat fish every year during the Spring Festival to ask for "Nian Nian Yu" and "Lian Nian Yu". From the perspective of cultural symbolism, fish was regarded as a symbol of favorable timing and geographical location in the eyes of the Chinese people because of its speed of movement. It was also a symbol of happiness and human yearning for a peaceful life. Lotus had a noble and elegant meaning and was regarded as a holy flower in Buddhism. When the lotus leaves spread out, the dewdrops rolled, and the fish swam in the jade carving, it could bring infinite auspicious blessings to people. It had the beautiful meaning of making money, attracting blessings, blocking disasters, avoiding disasters, and so on. This combination of pictures was elegant, lively, and interesting. It not only showed the breath of life in the world, but also perfectly combined with the jade quality, allowing the viewer to feel the inner peace. While waiting for the TV series, he could also read the exciting content related to this site!
Jade scraps carved into the sky
It was a very creative and valuable way to carve a flying bird with jadeite scraps. If the leftover materials were good, the jade carver would design and draw according to the characteristics of the material, then carve the design and modify the details. In the process of carving, one had to consider how to skillfully use the shape, texture, and other characteristics of the leftover materials. For example, for some defective or special shapes, by carefully designing the flying posture, clothing, and other elements, the defects could be transformed into features or avoid unfavorable factors. After the carving was done and polished, the finished product could display a unique artistic charm, like " fluttering long sleeves dancing in the spring breeze, delicate and slender waist swaying people's souls ". The original value of the leftover materials might not be high, but after such a clever carving, its value would be greatly increased. The novel "Ledge" is equally exciting. Everyone is welcome to click and read it!
White Jade Carved Bow
The White Feather Carving Bow was created by the Black Lotus Strategy Manual (Transdimensional Book), which was an epic fantasy genre. The style was relaxed and included elements such as eliminating demons and protecting the Dao, attacking sick women, and so on. The original novel Eternal Night Galaxy was also written by him. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>