Second-hand High Pressure Reaction Kettle
The price of second-hand high-pressure reactors varied due to many factors. According to the data, the price of a second-hand 5-ton high-pressure reactor was: if it was one piece, it would be $15,000.00, and if it was more than two pieces, it would be $14,500.00. However, this was only the price of some manufacturers. The price setting of second-hand high-pressure reactors by different manufacturers would also be affected by factors such as the age of the equipment, the year of production, and the performance of the equipment. Read more exciting novels for free
Xi Xian Local Second-hand High Pressure Reaction Kettle
There was no direct information about the second-hand high-pressure reactor in Xi Xian. However, there was information about the recycling of high-pressure reactors and the sale of second-hand reactors, such as the recycling of high-pressure reactors of various specifications (including 1 - 20 tons). The online price of second-hand stainless steel reactors was 400 - 500 yuan, and the factory direct price of reaction pots was 60 - 100 yuan. It was not mentioned whether it was targeted at Xi Xian. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Mini High Pressure Reaction Kettle Operation Rules
Second-hand Enamel Reaction Kettle Recovery Quanzhou City
There were many equipment recycling businesses in Quanzhou City, including the recycling of second-hand porcelain reactors. The city was recycling a variety of factory equipment, such as chemical plants, pharmaceutical factories, oil refineries, starch factories, flour factories, beverage factories, milk factories, etc. All kinds of reactors (including porcelain reactors), cyclones, etc. were included in the recycling. However, the specific process and more detailed price of the second-hand porcelain reactor in Quanzhou City were not explicitly mentioned. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Industrial reaction kettle
Industrial reactors can be divided into three types according to their structural forms: open (open), closed (closed), and semi-open and semi-closed; according to the heat transfer method, they can be divided into external circulation type, internal circulation type, and direct flow type; according to the heating medium, they can be divided into water-cooled, oil-cooled, and air-cooled jacket heating types. The materials of the reactor were carbon steel, stainless steel, and so on. The process includes putting the materials into the stirring tank for heating and stirring. After reaching the set temperature, close the feeding valve and then open the discharge valve. The materials transfer heat to the cooling tank through the heat exchange and then enter the splitter. The magnetic stirring rod in the splitter is used to clarify the liquid phase. After the liquid phase is filtered, it enters the measuring tank and then is recycled through the return pipe. The concentrated solid particles are processed. When cleaning, open the discharge valve and wash with a high-pressure pump. After checking that there is no problem, it can be put into use. If you need more information about industrial reactors, you can further consult the relevant information. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Second-hand 3 tons Yang Yang Enamel Reaction Kettle, long-term recycling
If you want to recover the second-hand 3-ton Yang Yang porcelain reactor for a long time, it is important to choose a professional equipment recycling company. For example, recycling companies such as Baros may provide convenient and fast equipment recycling services to provide you with professional solutions. Moreover, recycling second-hand porcelain reactors was an environmental friendly method. It could make full use of resources, reduce waste generation, reduce the risk of environmental pollution, and save costs for companies in need. In addition, second-hand porcelain reactors were widely used in the oil, chemical and other industries. When chemical companies considered upgrading equipment, the recycling of second-hand porcelain reactors could reduce unnecessary expenses without affecting production quality. When companies recycled, they could also get a certain discount, reduce purchasing costs, and improve their corporate image. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Reaction kettle reconstruction construction plan
The following are some common construction plans for the reactor: ** I. Electromagnetic heating modification plan for the reactor ** 1. ** Power calculation and selection ** - First of all, the known conditions must be clear, such as the material, size (diameter, height, thickness, etc.), weight, effective volume, material weight, material mixing heat, heating temperature requirements, time requirements, etc. - According to the heat calculation formula,[Q = cm/Delta t+km](where [c] is the specific heat capacity,[m] is the mass, and [Delta t] is the temperature difference), the specific heat capacity [J/(KG* ° C)], the temperature difference [° C], and the mass [KG] are substituted into the formula and divided by the time [S] to obtain the power [W]. - For example, the known atmospheric pressure reactor, material 304, the external dimensions of the kettle body are 2 meters in diameter * 3 meters in height (8mm in thickness), the weight is about 1000kg, the effective volume is 7 m3, the material weight is 7 tons, the reaction material is a certain liquid material mixed specific heat according to the requirements of 4200J/kg* ° C, and it is required to be heated from 20 ° C to 280 ° C within 3 hours. After calculating the theoretical power, it is necessary to consider the loss (generally increase the loss by 20%) to determine the actual matching power. For example, the theoretical power of the above example is 708KW, and the actual matching is 708KW *1.2 = 850KW. Seven sets of 120KW electromagnetic heater can be used for parallel heating. 2. ** Steps to design the plan ** - Understand the original structure and working principle of the reactor, including the size, shape, material, working temperature and other parameters of the reactor. Then, according to the actual situation and needs of the reactor, the electromagnetic heating scheme was designed. ** II. Upgrade plan for the support and foam plug at the bottom of the reactor ** 1. ** Selection of Upgrade Materials ** - High-quality steel was used to ensure the bearing capacity and corrosion resistance of the lower support and foam plug. 2. ** Pre-construction preparation ** - The original lower support and foam plug were first cleaned, and then disassembled to facilitate the installation of new materials. 3. ** installation process ** - After determining the size of the new material, he drilled a hole and installed it gently. Then, he adjusted the reaction kettle to ensure that the new support and foam plug were stable. ** 3. Cleaning and replacement of paint containers ** 1. ** Clean paint container ** - Clean up the old paint container, use professional equipment to heat and spray it with high pressure to ensure that it is thoroughly cleaned. 2. ** Change paint container ** - A new paint container was installed, and the corresponding clamp was used to fix the container to ensure safety and reliability. ** IV. Replacing the valve and sensor ** 1. ** Replacing the valve ** - First of all, determine which valve needs to be replaced, then use professional equipment to disassemble it, and choose a suitable position for the new valve to install. 2. ** Replacing the sensor ** - Clean the original sensor, then remove it and mark it according to the location where the new sensor is to be installed. For the modification of the reactor involving the key supervision of dangerous chemical processes (such as the modification of the internal heat-conducting oil-injected electric heating reactor without cooling measures): 1. ** For the atmospheric pressure reaction process using heat medium heating ** - The reaction kettle should be equipped with automatic control valve for feed and heat medium, and the reaction temperature can be adjusted by changing the feed flow or heat medium flow. - The reaction kettle shall be equipped with a high reaction temperature alarm and interlocked to cut off the feed or the heat medium. The parallel lock shall be used to open the emergency cooling system (including the cooling medium) and emergency discharge facilities. 2. ** For the pressure reaction process using heat medium heating ** - The reaction kettle should be equipped with an automatic feed or heat medium flow control valve, which can adjust the reaction temperature and pressure by changing the feed flow or heat medium flow. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Zhoushan reaction kettle electric heating
Zhoushan electric heating heat-conducting oil furnace has been applied in the production of oil resin. In industrial production, the reaction kettle electric heating heat-conducting oil furnace had many advantages. For example, its heating system was a closed circulation system, which could quickly heat up and cool down the reaction kettle. It could be customized to a very small volume and was easy to install. It was suitable for medical research occasions. It could realize special control methods such as cascaded control to stabilize the temperature. It could also realize automatic control through remote communication or programming with a PC to provide safety for production. It also played a positive role in reducing the probability of defective products and providing complex temperature control process design solutions. Its power consumption mainly depends on the heating part and the circulating pump, and the power consumption can be reduced through measures such as pipe insulation. In the relevant application scenarios of Zhoushan, the electric heating oil furnace of the reactor could also play a similar role. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Reaction kettle oxygen concentration detection
There were many ways to detect the oxygen concentration in the reactor: 1. ** Sensing ** - ** Limiting-current type micro-oxygen sensor **: For example, the SO-D0 - 020 -A100C limiting-current type Zirconia oxygen sensor recommended by the industry mining website. The range is 0.01% - 2%, the wire length is 1 meter, and the minimum oxygen can be detected is 100pm. It is widely used in metal laser 3D printer, nitrogen production, fermentation and other fields. Its working principle was based on the carrier of the current in the zirconium dioxide bath being oxygen ions. When voltage was applied to the zirconium dioxide bath, oxygen was pumped to the positive pole, and a cover with a hole was added to the negative pole of the bath to limit the rate of oxygen flowing to the negative pole. As the applied voltage increased, the current in the bath reached saturation (limiting current), which was proportional to the concentration of oxygen in the surrounding environment. - ** Phorescent micro-oxygen transmitter **: For example, the UK's SSS fluorescent micro-oxygen transmitter-LOX-Trace- 1000 - BLX can measure the exposure to any oxygen concentration environment without damaging the sensor. It has high oxygen sensitivity and high sensitivity, fast response speed, and short purification time. It can be directly connected to the controller through the RS485 interface. - ** Electrochemical fuel cell type oxygen analyzer **: The oxygen sensor of the Southland oxygen analyzer-OMD640 is based on the principle of an electro-chemical fuel cell. The standard cell (TO2 - 133) is not affected by other background gases such as H2, He, or hydrogen. The acidic cell (TO2 - 233) works in the presence of acidic gases such as carbon dioxide or natural gas. The sensor is independent and requires little maintenance. There is no need to clean the electrodeor add an solute. 2. ** Online Analysis System ** - By installing an online analysis system for the oxygen content in the reaction kettle, the sample gas in the reaction kettle was collected, and the oxygen content value in the sample gas was detected, so as to know the oxygen content value in the reaction kettle. - The system composition of the reactor oxygen content analyzer included three parts: pre-treatment, sample collection, and analysis. In the pre-treatment part, the medium in the sample gas that affects the sensor measurement is removed or diluted to an acceptable concentration by neutralizing, thinning, or absorbing, so as to ensure the life and measurement accuracy of the analysis part. 3. ** Other instruments for testing principles ** - There were also instruments based on the principle of electrochemistry (gas in the primary battery generates an electric current to detect), such as the explosion-proof oxygen analysis system with the product model number of SC-Y500EQ. The working and counter poles were separated by a thin layer of an solute and connected to an external circuit through a small resistance. When the gas diffused into the sensor, the surface of the sensitive pole would undergo an oxidization or reduction reaction to generate an electric current. The current was directly related to the gas concentration and could be measured. - There are also instruments based on the principles of parasitism, optical, laser, etc., such as the HCC-type reactor oxygen content analyzer, which can directly measure the oxygen content in real time and accurately control it through bypass or in-place measurement. It has customized pre-treatment. It has the functions of neutralizing the sample gas with acid and base, removing organic matter, removing water, drying, stabilizing pressure, constant flow, etc., and has safety protection.(When the oxygen concentration value exceeds the first level of the pre-set alarm value, the electromagnetic nitrogen replacement will be automatically turned on until the value drops to the safe range), the nitrogen flow control (equipped with a nitrogen control box, when the oxygen concentration value is within the safe range, the large flow will be automatically cut off to realize the continuous supply of small flow to meet the micro-positive pressure in the kettle machine) and other features, which can realize automatic drainage and reduce personnel maintenance costs. In addition, traditional detection methods also used electrochemistry, ion flow, parasitism, Zirconia, laser, and other principles for detection. When there are special conditions in the reactor (such as the presence of corrosive gases, water vapor, etc.), a gas pre-treatment system may be needed to process the sample gas, remove organic liquids, water, and some impurities before analyzing the oxygen content. If the biochemical oxygen analyzer was used, it could meet the needs of ordinary customers. However, when the gas composition was too complicated to be completely processed by the pre-treatment system, the oxygen content analysis could only be carried out after the pre-treatment system. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Spray coating f30 reaction kettle
F30 can be used to spray the inner wall of the reaction kettle. For example, in some reaction kettles used for mixing, heating, cooling, and heat preservation of liquid materials, the inner wall would be sprayed with F30. The equipment used this method of spraying F30 on the inner wall and was made of stainless steel 304 as a whole, which met the medical and food hygiene requirements and could meet the standards of the standard. In addition, there are also Suvihara powder, such as ECTFE 6014, 6514, 6614, etc., which can be used for F30 anti-corrosion static spraying powder. There are related products sold in the market. In the chemical and pharmaceutical industries, by spraying ceramic coating such as F30 on the inner surface of the reactor after sand blasting and rust removal, it can replace the glass glaze coating or be used to repair the partial peeling coating of the reactor to improve corrosion resistance, prevent chemical damage to the equipment, and ensure product quality and safety. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Design of the Steam Pipelining Plate of the Reaction Kettle
The design of the reactor steam pipe signboard had to be done properly. First of all, the words 'steam pipe' had to be written clearly on the signboard so that people could know what kind of pipe it was at a glance. Then, the flow of the pipe had to be clearly marked with an arrow to see if it was going into or out of the reactor. The pressure range had to be written down, for example, low pressure, medium pressure, or high pressure steam pipe. The temperature range could not be reduced either. After all, the temperature of the steam was very important. Also, the number of the pipeline had to be included so that it could be quickly located during management and maintenance. The material could also be written down, be it stainless steel or some other material. There were also safety warning signs, such as high temperature danger, so that people would know to be careful when they saw it. With such a signboard, all kinds of information about the steam pipe of the reactor could be seen at a glance. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>