Equipment specifications of second-hand porcelain reactor in Xuancheng City
Enamel reactors were generally divided into two types: K-type (open) and F-type (closed). The naming rule of the K-type porcelain reactor is K 1 - 2/3 - 4 5 6 GB/T25027 - 2010 (Sixty-shaft seal code: mechanical seal is P, packing seal is S; Fifty-agitators code: anchor type M, frame type K, paddle type J, impeller-type Y, other N; Fourty-transmission device code: W-type is represented by W, DZ-type is represented by D, SZ-type is represented by S; Thirty-nominal diameter, mm; Two-nominal volume, L; One-inner container design pressure, Pa: 0.25, 0.6, 1.0; K -Glass-lined open stirring vessel code). The naming rule of the F-type porcelain reactor is F 1 - 2/3 - 4 5 6 GB/T25026 - 2010 (Sixth-Stirring shaft seal code: there are two types of mechanical seals (direct type is P, transition plate type is PC); there are two types of packing seals.(The direct type is S, and the transition plate type is SC.); Fifty-code of the agitators: Paddle-type J, impeller-type Y, and other N; Fourty-code of the transmission device: W for W-type, D for DZ-type, and S for SZ-type; Thirty-nominal diameter, mm; Two-nominal volume, L; One-design pressure of the inner vessel, Pa: 0.25, 0.6, 1.0; F-code of the glass-lined closed stirring vessel). However, at present, there were no special specifications for the second-hand porcelain reactor equipment in Xuancheng City. Therefore, it was speculated that its specifications also followed the specifications of the two types of porcelain reactors. Its technical parameters are mainly used under pressure (0.2 - 0.4Mpa), acid resistance (Good corrosion resistance to all kinds of organic acid, mineral acid and organic solution), Alkaline resistance (Enamel has poor corrosion resistance to acidic solution), operating temperature (The heating and cooling should be carried out slowly. The glass-lined equipment should be used at a temperature of 0 - 200 ° C, and the temperature resistance should be greater than or equal to 200 ° C), the thickness of the porcelain layer,(The thickness of the porcelain layer of the equipment is 0.8 - 2.0mm, and the thickness of the porcelain layer of the glass-lined equipment accessories is 0.6 - 1.8mm), withstand voltage (with good insulation), impact resistance (the smaller the internal stress of the glass layer, the better the elasticity, the greater the hardness, and the higher the bending and compression strength, the better the impact resistance), etc. Read more exciting novels for free
1500 liters second-hand porcelain reactor
Regarding the 1500-liter second-hand porcelain reactor, there was some relevant sales and recycling information from the reference materials. In some areas, there were second-hand 1500-liter porcelain reactors for sale. The price of a second-hand 1500-liter porcelain reactor in Liangshan County was 48,000 yuan, and a second-hand porcelain reactor in Jining City was 20,000 yuan. It can be widely used in the oil, chemical, rubber, pesticide, dye, medicine, food and other industries to complete the process of sulfur, nitration, dehydration, dehydration, condensation, etc. It is a pressure vessel, also known as a reactor, reaction pot, etc. The materials are generally carbon and steel, stainless steel, Zirconium, nickel-based (Hastelt, Monel, Inconel) alloys and other composite materials. If there was an idle 1500-liter second-hand porcelain reactor, there was also a professional equipment recycling service that could deal with it. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Selling 15 tons of second-hand porcelain reactor
How much is a second-hand three-ton porcelain reactor?
Information showed that the price of a second-hand three-ton porcelain reactor was 13000 yuan per piece, and 12500 yuan per piece for two or more pieces (including shipping to be discussed, shipped from Jining, Shandong). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Second-hand 1 cubic meter to 20 cubic meter porcelain reactor
Second-hand porcelain reactors were widely used in the fields of oil, chemical, rubber, pesticide, dye, medicine, food, etc. They were used to complete the processes of sulfur, nitration, dehydration, dehydration, condensation, etc., such as reactors, reaction pots, decomposition pots, reactors, etc. The materials were generally carbon and manganese-steel, stainless steel, zirconium, nickel-based (Hastelloy, Monel, Inconel) alloys, and other composite materials. If you want to buy a second-hand 1 cubic meter to 20 cubic meter porcelain reactor, you should pay attention to the following points: 1. Carefully check before purchase: carefully check the appearance and internal condition of the equipment to see if there are cracks, wear, rust and other problems. At the same time, check the sealing performance and stirring performance of the equipment. 2. Choose a regular supplier: A regular, reputable second-hand equipment supplier can ensure the quality and performance of the equipment, avoid buying inferior equipment, and provide after-sales service to ensure the normal use of the equipment. 3. Correct use and maintenance: After purchase, operate according to the equipment manual to avoid overloading. At the same time, perform regular maintenance and maintenance to ensure the normal service life of the equipment. However, the reference materials did not give the specific price and recycling price of the 1 cubic meter to 20 cubic meter porcelain reactor. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the specifications of the foam reactor?
If the foam reactor here referred to the air foam generator, its specifications were as follows: 1. ** Model **: Generally, there are PC - 4, PC - 8, PC - 16, PC - 24 and other models. 2. ** Mixed liquid flow rate and foam generation under working pressure ** - Model PC - 4: When the working pressure is 0.5MP, the mixed liquid is 4 liters/second, and the foam generation is 25 liters. - Model PC - 8: When the working pressure is 0.5MP, the mixed liquid is 8 liters/second, and the foam generation is 50 liters. - Model PC - 16: When the working pressure is 0.5MP, the mixed liquid is 16 liters/second, and the foam generation is 100 liters. - Model PC - 24: When the working pressure is 0.5MP, the mixed liquid is 24 liters/second, and the foam generation is 150 liters. 3. ** Working pressure range **: 0.2 - 0.5MP, and the data shows that the pressure range of the generator is 0.3 - 0.6MP, and the working pressure range is 2 - 5kg/cm <anno data-annotation-id ="00000000 - 4110 - 400a-400a-800000000000"> 2 - 5kg/cm </anno>(about 0.2 - 0.5MP after conversion). The glass is broken under the pressure of 1 - 2kg/cm </anno>(about 0.1 - 0.2MP after conversion). 4. ** Main material **: Normally, it is made of spherical cast iron and 304 stainless steel. 5. ** Connection method **: Usually screw thread, or a flange-shaped connection. 6. ** Weight **: For example, the weight of the PC4 (25 liters) is 16kg. If the foam reactor here refers to the foaming machine, its specifications are as follows: 1. ** Production **: The amount of foam produced. This amount must be higher than 20% of the required amount of foam. The lower limit is used as the basis for approval. 2. ** Installable capacity **: Total installed power. It is important to calculate the adaptability of the total power consumption of the circuit. 3. ** Equipment size **: It is a necessary element for the overall layout of the factory. 4. ** Unit diameter range **: Generally, it is compared according to the requirements of the specific product on the unit diameter. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How much is the second-hand reactor equipment in Tonghua?
Tonghua's second-hand 15000l porcelain reactor was priced at 8000 yuan. However, the price of the reactor was affected by many factors, such as the type of equipment, production process, market supply and demand, etc. The price of second-hand reactors with different specifications, materials, and usage conditions would vary greatly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Table of specifications and parameters of foam reactor
The following is some of the parameters of the foam related equipment, but not in the form of a table: - ** Air foam generator (PC series)**: - Model PC - 4: When the working pressure is 0.5MP, the mixing liquid is 4 liters/second, and the foam generation is 25 liters; the working pressure range is 0.2 - 0.5MP; the glass sheet is broken under the pressure of 0.1 - 0.2MP. - Model PC - 8: When the working pressure is 0.5MP, the mixing liquid is 8L/s, and the foam generation is 50L. - Model PC - 16: When the working pressure is 0.5MP, the mixing liquid is 16L/s, and the foam generation is 100L. - Model PC - 24: When the working pressure is 0.5MP, the mixing liquid is 24 liters/second, and the foam generation is 150 liters. - Pressure range: 0.3 - 0.6MP. - Working pressure range: 2 - 5kg/cm <anno data-annotation-id ="00000100 - 4110 - 4010 - 4010 - 8000 - 800000000000"> 2 - 5kg/cm </anno>(under another standard), glass is broken by water pressure at 1 - 2 kg/cm </anno>. - ** Low temperature immersion type photochemistry reactor **: - Power supply: AC 220V. - [Operation interface: 7-inch color LCD touch screen.] - Control System: Intelligent light source control, PID constant temperature control. - Intelligent light source: automatic trigger, warm-up, operation, cooling, automatic power compensation, intelligent adjustment of lamp temperature. - Data processing: History, history curve, USB download. - Power range: 100 - 1000W. - Light source cooling: Blower + Quartz cold trap. - [Running time: Time setting: 0 - 2400 hours.] - The temperature of the sample: -60 ° C. - [Treatment capacity: 1000ml] - <br><br> The specifications of the reactor: 500, 1000ml (or customized). - [The reactor interface: three 24#grinders as standard.] - Function of the reactor: adding liquid, venting, venting, return flow, temperature measurement. - Stirring method: Magnetic stirring, 1000 - 3000 revolutions per minute. - Chilling capacity: 2.8KW. - [Cooler: R22(R23)] - Liquid tank medium: Silicon oil. - [Liquid tank capacity: 20L] - Total power: 3.7KW - size: 550x750x1650mm - [Weight: 100kg] - ** The relevant parameters of the foaming machine **: - [Production: The amount of foam produced must be 20% higher than the amount of foam required, based on the lower limit.] - [Total installed power: Total installed power.] - The size of the equipment. - Unit diameter range. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Second-hand stainless steel reactor in Ankang City
There were many businesses or individuals involved in second-hand stainless steel reactors in Ankang. Some specialized in the sale and transfer of new and old reactors, including stainless steel reactors and other equipment. For example, Mr. Guo, Mr. Liu, Mr. Yang, Mr. Li, Mr. Lu, Mr. Zhang, etc. were engaged in second-hand chemical equipment-related business, including the sale and recycling of second-hand stainless steel reactors. They would trade second-hand reactors, cyclones, evaporating machines, condensers, driers, and other equipment. These equipment were widely used in the chemical, pharmaceutical, food, and other industries. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Yichun City second-hand stainless steel reactor for sale
Yichun City has a chemical plant and food factory that has closed down due to financial problems. It is transferring all kinds of second-hand chemical equipment, food equipment, and pharmaceutical equipment at a low price, including second-hand stainless steel reactors. The equipment is 80% new to 99% new. It can be purchased separately or packaged. If you need to contact me, please say that you saw the information on 58 City. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Baoshan City, second-hand 3 tons of stainless steel reactor recycling
Regarding the specific situation of the recycling of second-hand 3-ton stainless steel reactors in Baoshan City, there was no specific information specifically for the recycling of this type of reactor in Baoshan City. He only knew about the information about the second-hand reactors (including stainless steel reactors) in the recycling chemical plant. He also mentioned that he could search the "Hualu.com" or mobile APP to check the status of the equipment to obtain more accurate price reference. He could also consult relevant institutions or technicians to evaluate the purchase process. If there was idle equipment that needed to be recycled, it was important to choose a professional equipment recycling service. For example, Baros provided convenient and fast equipment recycling services and professional solutions. At the same time, the price of second-hand stainless steel reactors was quoted at 400 - 500 yuan, but it was uncertain whether it was suitable for the recycling of 3 tons of stainless steel reactors in Baoshan City. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>