The large-scale explosion-proof double-layer glass reactor was designed with double-layer glass. The inner layer of the reactor could be mixed with the reaction medium, and the inner layer could be heated or cooled by different cold and heat sources (such as freezing liquid, hot water or hot oil). Under the set constant temperature conditions, in a closed glass reactor, it can carry out stirring reaction under normal pressure or negative pressure according to the use requirements. It can also perform the reaction solution's return and purification. It is an ideal pilot and production equipment for modern fine chemical plants, pharmaceutics and new material synthesis. It can be used for high-temperature reactions (the highest temperature can reach 300 ° C when equipped with the corresponding circulating oil bath), low-temperature reactions (the lowest temperature can reach-80 ° C when equipped with the corresponding low-temperature freezing liquid circulation system) and vacuum reactions. It can heat or cool the materials in the reaction kettle at a constant temperature, and can provide stirring to control the evaporating and returning of the reaction solution. After the reaction, the materials can be discharged from the discharge port at the bottom of the kettle, which is more convenient to operate. Read more exciting novels for free
The double-layer glass reactor was a type of equipment used in the fields of chemical engineering, pharmaceutics, and new material synthesis. It could be used for a variety of reactions, such as high-temperature reactions (up to 300 ° C), low-temperature reactions (down to-80 ° C), and vacuum reactions. The inner layer could be filled with a reaction medium for stirring reaction, and the inner layer could be filled with different cold and heat sources (such as freezing liquid, hot water, or hot oil) for circulating heating or cooling reaction. Under the set constant temperature conditions, in a closed glass reactor, the reaction can be carried out under normal pressure or negative pressure conditions according to the requirements, and the reaction solution can be used for recycling and retorting. In some combinations, one or more glass reaction kettles were connected in series to form a reaction device, which could realize the continuity of material reaction. It could also carry out vacuum stirring reaction, constant speed operation mixing reaction, liquid separation, purification and other operations. It also had a good technological effect on plant extraction and concentration. It was convenient to feed and easy to operate. It was an ideal pilot and production equipment for modern fine chemical plants, pharmaceutics and new material synthesis. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
According to the information provided, the price of the explosion-proof digital display electric heating laboratory glass stirring reactor single-layer glass reactor in Lianyungang City was 3000 yuan, but the price of the explosion-proof double-layer glass reactor in Lianyungang was not inquired, so it could not be accurately answered. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The principle of the S212 series double-layer glass reactor was to inject a constant temperature (high or low temperature) hot solution or cooling liquid through the double-layer reactor sandwich to heat or cool the materials in the reactor at a constant temperature, and it could provide stirring. When the materials are reacting in the reaction kettle, it can control the evaporating and flowing back of the reaction solution. After the reaction is completed, the materials can be discharged from the discharge port at the bottom of the kettle. This design allowed the reaction to be carried out at a constant speed, constant force, and constant temperature. It could be used for reactions such as concentration, sublimation, recycling, separation, and purification. It was suitable for modern chemical samples, biochemistry, sample experiments, pharmaceutics, and new material synthesis. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If you want to customize a double-layer glass reactor in Suzhou, you need to consider the following factors: 1. ** Volume and size **: The capacity and size of the reactor are determined according to the experiment or production needs. If the capacity is too large or too small, it may affect the reaction effect. 2. ** Control range **: Choose the appropriate temperature control range and heating/cooling method according to the temperature requirements of the experiment or production. 3. ** Material and Corrosion Resistance **: According to the nature of the reaction system, select the appropriate glass material and its corrosion resistance. For special reactions, special glass or coating materials may be used. 4. ** Sealing performance **: If the reaction needs to run for a long time or is a high-pressure reaction, pay special attention to the sealing performance of the reactor. 5. ** Stirring and mixing **: According to the characteristics of the reaction system, select the appropriate stirring method and type of stirring device. For reactions that require a high mixing effect, special stirrers or increased stirring speed may be used. 6. ** Safety and explosion-proof performance **: Safety issues should be fully considered during custom-making, such as adding explosion-proof design, installing safety devices such as pressure gauge and thermometer to ensure the safety and reliability of the reaction process. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
First of all, before turning on the equipment, check whether the power supply, water source, and air source of the equipment are normal. If there is any abnormality, deal with it immediately. After turning on the power supply of the equipment, adjust the explosion-proof temperature control device of the reactor to the required temperature, and then start the heating or cooling system. When the equipment reached the set temperature, turn off the heating or cooling system, and then adjust the temperature control instrument to room temperature to prevent the equipment from overheating or overcooling. During the operation of the equipment, it is necessary to check the operation status of the equipment regularly. Once an abnormality is found, it should be immediately shut down for treatment. When the equipment was shut down, the heating or cooling system should be turned off first, then the equipment power supply should be turned off, and finally the equipment water source and air source should be dealt with. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The double-layer glass reaction kettle was designed with double-layer glass. The inner layer was used to place the reaction medium for stirring and reaction. The inner layer could be heated or cooled by different cold and heat sources (such as freezing liquid, hot water or hot oil). It could be stirred and reacted under normal pressure or negative pressure in a closed glass reactor under a set constant temperature. It could also be used for the reaction solution's recycling and purification. It was an ideal pilot and production equipment for modern fine chemical plants, pharmaceutics, and new material synthesis. It could be used for high-temperature reactions (with the corresponding equipment, the highest temperature could reach 300 ° C), and it could also be used for low-temperature reactions (the lowest temperature could reach-80 ° C). It could also be used for vacuum reactions. In terms of usage, for example, pay attention to heat insulation.(The heat insulation performance is relatively weak when dealing with high temperature and ultra-low temperature reactions. Heat insulation materials are needed to protect the kettle body. Pay attention to wrapping the kettle body and the liquid guide pipe and maintain a certain thickness). Choose a suitable storage location.(flat area to ensure stability), selection of temperature control medium (Choose a water bath at room temperature, an oil bath at high temperature, and pay attention to the chosen material's stickiness at ultra-low or high temperatures), and matters needing attention when adding materials.(Solid reagents shall be mixed into a solution and added, and liquid reagents shall be pumped in with supporting equipment. When feeding large reaction kettle, a moving ladder shall be equipped), electrical and operational safety (power supply voltage shall comply with regulations, idling speed shall not be too fast, and attention shall be paid to power connection stability and ground connection device, etc.), equipment characteristics and configuration (make full use of stirring, recycling, retorting and other functions and reasonably allocate relevant accessories), etc., to improve the efficiency of use. The size of the double-layer glass reaction kettle in series can be selected from 5 - 200L. The reaction device is composed of one or more glass reaction kettles in series, which can realize the continuity of material reaction. It can carry out vacuum stirring reaction, high-temperature or low-temperature reaction, constant speed operation mixing reaction, purification, back flow, concentration, negative pressure operation, liquid separation function, purification, etc. It has a good technological effect on plant extraction and concentration. The stirring separation is equipped with liquid separation equipment, and the effect is obvious. It can replace the rotating evaporating device to concentrate high-purity materials and can be equipped with ultrasonic stirring to reduce the reaction time. It is convenient to feed and simple to operate. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Chuzhou's double-layer glass reactors had different specifications and prices. For example, the price of 50L, 150L, and 200L double-layer glass reactors supplied by the manufacturer was 3350.0 RMB, and the price of Xinyu 3L double-layer glass reactor was 5000.00 RMB. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following are the prices of some double-layer glass reactor manufacturers in Henan: - The explosion-proof small speed digital display Ruihan S212 double-layer glass high and low temperature reaction kettle jacket kettle in Zhengzhou City, the price was 2375.0 yuan. - Zhengzhou Keda S212 - 10L double-layer glass reactor, the price was 14,000 yuan. - The supply of Zhengzhou Sikes double-layer glass reactor ZY -1L, the price is 2400.00 yuan. - 30L explosion-proof double-layer glass reactor (available in Zhengzhou, Henan Province), priced at 6300.00 yuan. - Shandong Laboratory Qianzheng Instrument Double-layer Glass Reaction Kettle S212 - 30L (available in Zhengzhou, Henan Province), the price was 5300.00 yuan. - 10L double-layer glass reactor (Zhengzhou Brocade Factory Direct Delivery), the price is 10.00 yuan. - The supply of double-layer glass reactor, glass reactor, reaction kettle, SP-50L, the price is 12,800 yuan. - The supplier of the double-layer glass reactor/glass vacuum reactor/Peptide reactor, the price is 15,000 yuan. - Professional wholesale double-layer glass reactor ZY -1L small reactor, the price is 2400.00 yuan. - Zhengzhou Great Wall Instrument AG-20L frequency control double-layer glass reactor, the price is 18,200 yuan. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>