What should I do if there is no response in the task bar when the laptop is turned on?
If the task bar doesn't respond after the laptop is turned on, try the following methods:
1. Open the task manager: If there is a reaction when you right-click the task bar, you can right-click the blank space of the task bar to select the task manager. If there is no reaction when you right-click the task bar, you can press the keyboard [Control +Shift+Esc] key to open the task manager. In the task manager, click the [Progress] icon, find the [Window Explorer], right-click the [Window Explorer] and select [Restart (R)], then wait for a moment. If the desktop or the task manager were abnormal after the restart, he would click [Start application] and [Run new task] in the task manager, then enter [Explorer] and click [OK].
2. To check the progress, press the combination of the keys on the keyboard,"Shift" and "Esc" to open the task manager, switch to the detailed information page, find the explorer.Exe process, click the end task at the bottom right corner, then click the file at the top left corner, choose to run a new task, and finally enter explorer.Exe, click OK. You can also press the combination key of
What is the slow response of the laptop
The slow response of a laptop may be caused by the following factors: 1. ** Hardware related ** - ** Low hardware configuration **: If the processor performance is poor, the memory capacity is small, and the type of hard disk is poor (for example, the read and write speed of a mechanical hard disk is slower than that of a solid-state hard disk), the computer's response speed will be slow. - ** hardware failure **: hardware problems such as aging or damaged memory banks, bad sectors on the hard disk, etc. will affect the operating speed of the computer. For example, I/O device errors, damaged files or unreadable files, etc. during the use of the laptop may be a bad hard disk. - ** High temperature **: Overheating will cause the processor to drop frequency, which will affect performance. For example, if the computer's heat sink was blocked or used in a poorly vented environment (such as a soft surface such as a bed or sofa), it would cause the temperature to be too high. 2. ** Software-related ** - ** Insufficient System Resources **: Running multiple programs or tasks at the same time takes up too much memory or CPU resources. For example, opening multiple large software or many background programs at the same time. - ** Software conflict **: Some software is incompatible with the system or conflicts with each other, which may affect the speed of the computer. For example, the computer would slow down after installing software from an unknown source. - ** Driver problems **: Outdated or damaged drivers (such as drivers for graphics cards and network cards) may cause performance problems. - ** System setting problem **: improper system settings will affect the performance, such as setting the visual effects to high resource consumption mode, not selecting high performance mode for the power option, etc. - ** Viruses and Malware **: Viruses, malicious software, and adware in the computer will occupy the computer's memory and computing resources, causing the computer to slow down. It may even lead to serious situations such as data being encrypted and blackmailed. - ** Caching and junk files **: As time goes by, the files in the computer, such as temporary files, and junk files, become useless and occupy the memory, causing the computer to react slowly. - ** Disk Fragment (for mechanical hard disks)**: The reading and writing of files are done on the hard disk. Every time a file is written or deleted, the data on the hard disk will be disconnected, causing the computer to slow down. - ** Too many auto-boot programs **: Many software are installed with auto-boot selected by default. The more auto-boot programs there are, the slower the computer starts and runs. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
There was no response after the Legend laptop was started.
If the Legend laptop doesn't respond after starting up, you can try the following solutions: 1. Check the power supply and battery: Make sure the power supply is connected properly, without loosening or falling off. If you are using a battery, try to replace the battery or use a power charger. 2. Forcefully restart the computer: press the power button for more than 10 seconds to forcibly restart the laptop. If you can't forcibly restart the laptop, you can try to remove the battery and re-install it. 3. To reset the computer, press the F8 key to enter the safe mode. In the safe mode, open the "System Restore" function to restore the system to its previous state. If you can't enter the safe mode, you can try to use the "One Touch Restore" function that comes with the Legend notebook to restore the system to the factory settings. 4. Seeking professional help: If the above methods cannot solve the problem, it is recommended to contact the customer service of Legend for more professional technical support and service. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What is the problem with the slow response of the laptop?
The slow response of a laptop can be caused by a variety of problems: 1. ** Insufficient System Resources **: Running multiple programs or tasks at the same time will take up too much memory or CPU resources. You can use the task manager (Windows: control + Shift + Esc; macs: Command + Option + Esc) to check the running programs and close unnecessary applications. If you want to run an application that requires a lot of memory, you can consider increasing the RAM (memory). 2. ** Hard Disk Problem **: - The lack of hard disk space, fragments, or reduced performance will affect the computer's response speed. Temporary files and unnecessary data can be cleaned to free up hard disk space. If you use a mechanical hard disk, you can use a disk defrag tool to defragment it. You can also consider upgrading to a solid-state hard disk (SPD) to improve read and write speed. - If the laptop often used sleep and hibernation mode and rarely shut down, in addition to affecting the wear and tear of the laptop itself, it may also affect the hard disk. If the laptop appears to be very slow during use, or even jump out of I/O device errors, file or folder corruption and unreadable symptoms, it may be a problem with the hard disk, and should be shut down immediately to avoid more serious damage. 3. ** Software conflict **: Some software may be incompatible with the system or conflict with its operation. It can be used to uninstall recently installed software, especially software of unknown origin, and update all installed software to ensure compatibility with the operating system. 4. ** Driver problems **: Outdated or corrupted drivers may cause performance problems. You can update key drivers such as graphics cards and network cards. You can also go to the device manager to check if any devices display error signs, and then update or re-install the relevant drivers. 5. ** High temperature **: Overheating will cause the processor to drop frequency, which will affect performance. The fan and heat sink should be cleaned to ensure good heat dissipation, and the laptop should be used in a well-vented environment. It should be avoided on soft surfaces such as beds and sofas. 6. ** System Setting Problem **: Inappropriate system settings may affect performance. You can adjust the visual effects to the best performance in the "System Attributes", check the power options, and make sure that the "High Performance" mode is selected. 7. ** Administrative Authority and Virus **: Malware or viruses may occupy a large amount of system resources. Anti-virus software is required to perform a comprehensive scan to remove malicious software and regularly update the anti-virus software to protect the system. 8. ** hardware failure **: Old or damaged hardware, such as memory sticks, hard disks, or other components, may also cause the computer to respond slowly. You can use memory testing tools (such as the Windows memory diagnosis) to check the memory, and use tools such as CrystalDisk info to check the hard disk's SMART data. 9. ** Too many boot-up options **: If too many applications are pre-installed in the boot-up menu, the boot-up and the overall response speed of the computer will slow down. Can remove unnecessary boot programs and retain programs that must be started. 10. ** Insufficient memory, aging, or damage **: If the laptop fails to start up, often crashes for no reason, automatically reboots from time to time, or fails to install programs or operating systems, it may be a memory problem. You can test it by replacing the normal memory. If there is another laptop that supports this memory, you can perform a cross-test to confirm whether it is a memory problem. If the problem is not eliminated, you need to consider other peripheral failures. 11. ** Disk space not cleared **: If the disk space usage frequently exceeds 80 - 90% and you don't have the habit of organizing files, it will increase the risk of failure and affect the computer speed. It is recommended to store unimportant data in a USB drive or a mobile hard disk to make space available. If you do not store too many files and are still overloaded, you can go to the [System and Security] → [Security and Maintain] screen of the [Control Panel] and click [Maintain]. Set the automatic maintenance function option to [Close], and check and maintain it regularly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
HP laptop keeps turning on, no response
If the HP laptop does not respond when it is turned on, it may be caused by the following reasons: 1. ** Power supply problem **: - Make sure the power charger is connected to the computer and power outlet properly, and check if the cable is intact. - If the power connection is normal but the problem is still there, you can try to unplug the power charger and battery, press the power button for 10 seconds, then release it, and then plug in the power charger and battery again to try to turn it on. In addition, using different power outlets could also help eliminate socket problems. 2. ** hardware malfunction **: - Memory failure is one of the possible factors. You can try to plug in the memory stick again and make sure that it is connected well. - Hard drive failure could also cause this situation, which could be detected using HP's self-test tool. - If the problem still exists, it may be a problem with the graphics card or other hardware components. It is recommended to seek professional help. 3. ** Software problem **: - An operating system crash, virus infection, driver problems, or system file corruption could cause the boot to be unresponsive. For an operating system crash, you can try to use the system recovery function or start the computer in safe mode to repair the system. For virus infection, use security software to perform a full scan and remove the virus. Driver problems could be solved by updating the driver. 4. **Bios setting error **: - If you suspect that there is a problem with the BIOS settings, you can try to enter the BIOS interface to restore the default settings or update the BIOS version. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Dell5471, no response when turned on
If the Dell5471 doesn't respond when it's turned on, you can check it by following these steps: 1. ** Power supply related checks ** - Make sure the power cord is firmly connected to the computer and the power outlet. For notebooks, check if the charger is working properly. You can try to change the socket. - Check the battery to ensure that it is placed correctly. If there is a problem with the battery, it may need to be replaced. You can try to unplug the power charger and remove the battery. Leave the laptop for 10 - 20 minutes before connecting the power charger. You can also remove the battery on the back of the notebook and try to turn it on by connecting it to the power charger. If it turns on normally, it may be a bad battery contact or a malfunction. 2. ** Checking hardware faults ** - Disassemble the machine and measure whether the inductors are short-circuited. Check whether the common point, 3V and 5V voltage are normal. If the 5V power supply tube is burned, it can be replaced. - Check whether the CPU voltage is generated according to the time sequence, check PG (for example, measure the instantaneous voltage of SY_SWROK at the 4-pin of U9), and check PL_ST #(for example, measure the 4-pin of U11. If U11 is not directly connected through the 0-ohm-resistance of R251, it will be converted from PC_PL_ST #). - Online measurement of Q2's D-pole voltage, ACIDRV voltage and other related indicators to determine the fault point. - If there is no response and the power light flashes, it may be a problem with the CPU, memory, hard disk, graphics card, etc. If there was an alarm when the machine was turned on, the hardware must be repaired according to the alarm. - Turn off the computer, unplug the power cord and external devices, and gently shake the computer to ensure that the internal hardware connection is normal. This can solve the black screen problem caused by poor hardware contact. - To check the memory stick, you can open the memory slot at the bottom of the notebook, remove the memory stick and plug it in again. Open the hard drive cover at the bottom of the computer and check if the hard drive is connected properly. - For some circuit faults such as boot circuit (clock, reset, power supply, MOS tube, etc.) or I/O problems, it may cause the system to fail to boot. In this case, it should be sent to the after-sales service or repair shop to repair the motherboards. 3. ** Operating System Problem Checking ** - Try to force a power off and restart. Press and hold the power button until the computer turns off, then press the power button to turn it on. - Try to enter safe mode to fix system errors or to uninstall problematic software (press F8 or other designated keys when starting up). If you can't enter safe mode, you can try to enter the bios interface to reload the system. - If the computer is turned on and the screen is black, you can do the following: - Reboot the computer, press the Forced Shut Down button on the boot page, and repeat it three times to enter the Advanced Repair page. Then, click [Trouble Settling]-[Advanced Option]-[Start Setting]-[Start Safe Mode]. After entering the safe mode, press Win+R to open the run page, enter [msconfiguration] and enter. In the [General] option of the system configuration interface, select [selective boot], and clear the [load boot option] check. Switch to the [Services] window and select [Hide all Microsoft-based services] to disable them all. After confirming to save, open the task manager to disable the boot options, and then restart the computer. - If you can't enter safe mode, try to enter the bios interface to reload the system. If you can't enter the advanced mode and the bios mode, it may be a hardware problem. You need to deal with it according to the hardware fault diagnosis method. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
No response from the Legend Wei 6 laptop when plugged in
If there was no response from the Legend Wei 6 laptop, you could check from the following aspects: 1. Checking the power connection: - Check if the power cord is loose, including the connection between the power plug and socket, as well as the connection with the laptop's power interface. - There may be a problem with the power charger. For example, there is a problem with the power charger plug or the power socket of the notebook (no connection), or the power charger is damaged. You can use the voltage meter to measure whether the power charger plug is charged. 2. Batteries: - Check if the battery has not been used up or over-pressured, causing damage to the charger. If you charge the battery before it is used up, it may cause the battery to run out of power and cause the internal voltage of the computer to go over. If the charger is found to be over voltage, the charger may need to be checked or replaced. 3. Motherboard related: - If it can be started, it may be that the power indicator light on the main board is broken; if it cannot be started, it may be that there is a problem with the main board. In this case, it is recommended to go to a professional repair station for repair. Do not open it privately. If the above methods cannot solve the problem, you can call the Legend service line 400 - 990 - 8888 for consultation (service hours are from Monday to Sunday 9:00-18:00). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
No response after reading mode is turned on
There might be several reasons why there was no response after the reading mode was turned on: 1 software or system failure: Reading mode is usually run in the operating system or reading software. If the software or system fails, the reading mode may not work properly. You can try to restart the operating system or reading software or try to turn on reading mode again. 2. Device or browser problems: If there is a problem with the device or browser, the reading mode may not work properly. You can try to open reading mode on other devices or browser, or try to change the browser version or update the browser. 3. Reading software problems: If there is a problem with the reading software, it may also cause the reading mode to not work properly. You can try to restart the reading software or try to use other reading software. If none of the above methods can solve the problem, you can try to contact the technical support of the reading software or contact the operating system or the customer service department of the reading software for help.
There's no response from the laptop keyboard. What's going on?
The reason why the laptop keyboard didn't respond at all was probably due to the following reasons: 1. ** System failure or software conflict **: A problem with the operating system or software conflict may cause the keyboard to not respond. 2. ** Driver problem **: If there is a problem with the keyboard driver, the keyboard cannot be used normally. 3. ** Physical Damage **: For example, water, falling, etc. may cause physical damage to the keyboard. 4. ** Keyboard-lock **: Some laptops have a keyboard-lock function. If the keyboard is accidentally locked, the keyboard will be unusable. In this case, you only need to restart the laptop to solve the problem. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to solve the problem of no response on the laptop's touch pad?
If the laptop's touch pad did not respond, it could be solved from the following aspects: 1. ** Checking the status of the touch pad device **: Open the device manager and confirm whether the touch pad device is working normally. 2. ** Check the touch panel switch **: Almost 90% of the laptop touch panels have an independent switch. For example, the Asus series laptop requires you to press the "Fn+F10" combination key on the keyboard at the same time to activate the touch panel. Some computers may be re-opened by pressing the "Fn+ Touch Panel Switch", or check if the touch panel was locked due to accidentally pressing the F9 key (different models may be different) of the Xiaomi laptop. You can try to press the corresponding unlock key combination (such as the Fn + F9 key) to restore it. 3. ** Check the touch panel settings **: - Search for the trackpad in the settings, and if it was turned off, choose to turn it on. - He opened the Start menu, clicked on the "Gear" icon to enter the "Setting" option, found the "Device", clicked on the "Setting" option, and found the "Touch pad" in the pop-up interface. He checked whether the touch pad was turned on or not. He could also adjust the sensitivity of the touch pad to a moderate level. He also needed to check whether the "Keep the touch pad on when the mouse is connected" was checked. If it was not checked and a separate mouse was inserted, the touch pad might malfunction. - He clicked on the windows icon, opened the settings, clicked on "Device,""Mouse,""Other Mouse options," clicked on "Clickpad enabled," and then clicked on "OK." 4. ** Upgrade the driver of the touch panel **: The operation of the touch panel depends on the support of the driver. If the driver is outdated or damaged, the touch panel may not work normally. Press the shortcut key "Win+X" to open the "Device Manager", find the "Human Interface Device" on the right side, click on the sub-category to select "Touch Panel Compliant with the HID standard", right click and select "Upgrade Driver". You can also use "Driver Life" to check and repair the computer driver. 5. ** Rollback the driver **: If a new driver has been installed recently and there is a problem, it may be due to the driver's compatibility or installation failure. You can roll back the driver. 6. ** Check whether the hardware of the touch panel is normal **: In addition to software problems, the hardware of the touch panel itself may also be faulty. If the laptop's touch pad was flooded with water or too much dust and dirt accumulated inside, it might also cause no reaction. In this case, it was recommended to find a professional computer repairman to repair it. The touch pad should also be cleaned in time to keep the surface clean and tidy. 7. ** Check system settings and special circumstances **: - He made sure that he didn't accidentally turn off the touch pad. - Changing to tablet mode on a touch screen laptop may disable the trackpad, check if it is in that mode. - If the touch pad still doesn't respond after trying the above methods, you can try to restart the computer and see if it's back to normal. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What's wrong with the slow response of the newly bought laptop?
The slow response of a newly bought laptop may be caused by the following reasons: 1. ** In terms of hardware configuration **: Even if it's a new computer, if the hardware configuration is low, such as poor processor performance, insufficient memory capacity, or poor hard disk type (for example, mechanical hard disk is slower than solid state hard disk), it will cause slow response speed. 2. ** Software-related information ** - ** Too many auto-boot programs **: When many software are installed, the "auto-boot" option may be selected by default. Too many auto-boot programs will take up a lot of system resources and slow down the computer's boot speed and overall response speed. - ** Bloated software **: The computer may be pre-installed with a lot of unnecessary software (not only the built-in software of system builders and notebook brands, but also some applications that may not be needed). These software will take up system resources. - ** Software conflict **: Some software may have compatibility issues and conflict with each other, thus affecting the performance of the computer. - ** Virus or Malware **: Although it is a new computer, it is possible to be infected with viruses, malicious software, or adware during use. These will occupy the computer's memory and computing resources, causing the computer to become slow. 3. ** System related factors ** - ** System not optimized **: If the system of the new computer is not optimized properly, such as the power settings are not reasonable (the power level is not set according to the actual needs), it may also affect the reaction speed. - ** System update **: If the operating system is not updated to the latest version in time, there may be some performance loopholes or unoptimized parts that affect the computer's operating speed. 4. ** Disk related issues ** - ** Disk Fragments **: Although it is a new computer, disk fragments may occur if a large number of files are written or deleted during the initial use. The reading and writing of files on the hard disk were carried out in a certain order. Disk fragments would cause the data to be inconsistent, causing the computer to read slower. - ** Caching and junk files **: When you use the computer to browse the web and run programs, you will generate a lot of files such as a temporary file and junk files. These files will occupy the memory over time, and even a new computer may have a slow response due to this reason. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>