Dali University is preparing the project evaluation report.
The following are the situations that Dali might be involved in the preparation of the project evaluation report: ** I. Common Project Appraisal Report Type ** 1. ** Energy Saving Assessment Report ** - In Dali-related construction projects, such as the construction project of Dali-Panzhi Freeway (Dali-Dayao Section), energy conservation assessment report preparation services were required. This involves carrying out work in accordance with relevant national regulations and technical specifications and standards agreed upon in the contract, completing the project energy-saving report within the agreed time limit, providing relevant results and information on time, and providing corresponding follow-up services according to the requirements of the owner. It will be submitted to the competent department for technical review until it passes the approval of the review expert group and obtains the approval document of the project. 2. ** Social stability risk assessment report ** - For many projects in Dali, such as industrial, transportation, energy, real estate, water conservancy, public facilities, service industry, social undertaking, municipal engineering, environmental protection projects, etc., which were listed as key investment or construction projects of the state, province, city, and county, social stability risk analysis chapters and social assessment reports must be prepared. When organizing the preliminary work of the project, the project unit should entrust a professional institution to carry out the project social risk analysis and prepare the social stability risk assessment report. When submitting the project feasibility study report and the project application report, the project social stability risk assessment report should be submitted. The social stability risk assessment report is an important basis for the approval and approval of the project by the National Development and reform commission. ** II. Business Development Method of Report Creation (refer to the general situation in other regions)** 1. ** Owner Invitation ** - After the project was released, the owner could directly invite experts to participate in the project. Enter the name of the expert in the project [Invite a service supplier] and select it. 2. ** Participating in the bidding ** - After the owner released the project, the public account and other channels would push the project information reminder. After the professional institutions or experts checked it, they could enter the website and choose the project to bid. ** 3. Industries and Project Illustrations ** 1. ** Transportation Project ** - For example, the construction project of Dali-Panzhi Freeway (Dali-Dayao Section), in addition to the requirements for the preparation of the energy conservation assessment report, such projects may also involve a variety of other project assessment contents. 2. ** Manufacturing Project ** - For example, Dali manufacturing cluster development project involved the total investment, capital composition, expected economic benefit planning objectives and other aspects of evaluation content during the project construction process. These contents may also become part of the project evaluation report. Read more exciting novels for free
What are the basic points of preparing a report?
The basic points of preparing the report are as follows: 1. ** Based on ** - It had to be compiled based on real transactions and events. - Based on complete and accurate account books and other information. - It shall follow the basis, basis, principles and methods of preparation stipulated by the national unified accounting standards, and fill in the report format and content stipulated by the national unified accounting standards. 2. ** Requirements ** - The figures were real, ensuring that the data in the report accurately reflected the actual situation of the enterprise. - The content was complete, covering all the necessary accounting elements and other information. The accounting statements included the balance sheet, income statement, cash flow statement, various schedules, and notes. - The calculation was accurate to prevent calculation errors from affecting the accuracy of the report. - It was submitted in a timely manner so that the user could obtain information in time to make decisions. 3. ** Element related ** - The definition, characteristics, and relationships of the six basic accounting elements (assets, debts, owner's equity, income, expenses, and profit) must be clarified, because these elements are indispensable information elements in the preparation of financial statements. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Preparing the fabric feasibility study report
The preparation of a fabric feasibility study report usually includes the following important parts: * * I. Introduction ** 1. * * Project Description ** - The name of the project, the nature of the construction (such as new construction, expansion, etc.), the amount of investment, and other basic information should be clearly stated. For example, for the research and development and production project of high-tech weaving, printing and dyeing high-end fabrics, the investment amount is 70 million yuan, and the construction nature is new construction; the annual output of 5000 tons of high-end knitted fabrics project investment amount is 85 million yuan, which is also a new project. 2. * * Project Unit Description ** - It introduced the basic situation of the unit in charge of the project, including its background, experience, scale, etc. in the textile industry. 3. * * Establishment basis ** - It referred to the relevant national textile industry policies, industry standards, market research data, etc. 4. * * Main conclusions and recommendations ** - The preliminary judgment conclusion of the project feasibility, such as whether the project is feasible in terms of technology, economy, environment, etc., and give relevant suggestions. * * II. Project construction background, demand analysis and output plan ** 1. * * Project background ** - The macro background of the textile industry was analyzed. For example, with the economic development and changes in consumer demand, the requirements for fabrics changed from traditional to high-end and environmental protection. For example, in the high-end new environmental protection wall cloth and industrial functional fabric production project, due to environmental protection concerns and real estate driving the development of the home improvement industry, the demand for the wall cloth market increased and the demand for environmental protection wall cloth increased. 2. * * Planning policy compliance ** - To ensure that the project is in line with national and local textile industry planning, environmental protection policies, etc. 3. * * The necessity of project construction ** - From the perspective of satisfying market demand and enterprise development strategy. For example, enterprises needed to carry out project construction in order to expand market share, improve product quality, and reduce costs. For example, the company's existing production capacity was insufficient, and it needed to expand its business scope and increase its market share. 4. * * Enterprise Development Strategy Requirement Analysis ** - Explain how the project fits with the long-term development strategy of the enterprise, such as whether it will help the enterprise achieve the goals of industrial chain extension and brand building. 5. * * Project Market Requirement Analysis ** - Study the size of the fabric market, growth trends, consumer demand characteristics, etc. For example, analyzing the trend of sales of wall coverings year by year, predicting the future market size, and so on. 6. * * Project construction content, scale and output plan ** - The construction scale of the project, such as the floor area, construction area, etc., as well as the expected output, such as the annual output of printed cloth, dyed cloth, or the output of high-end knitted fabrics. * * III. Project site selection and element guarantee ** 1. * * Project Site Selection ** - Consider the rationality of the location, such as whether it is close to the raw material supply area, the convenience of transportation, the local industrial supporting environment, etc. 2. * * Project construction conditions ** - Analyzing whether the local infrastructure conditions (water, electricity, gas supply, etc.) and geological conditions meet the project construction requirements. 3. * * Element assurance analysis ** - To ensure that the human, material, and financial resources can meet the needs of the project construction and operation. * * IV. Project Construction Plan ** 1. * * Technology Plan ** - Confirm the technology used in the production of fabrics, such as high-tech weaving, printing, dyeing technology, etc., including the advancement and reliability of the technology. 2. * * Equipment Plan ** - Make a list of the required production equipment, and consider the type of equipment and the source of purchase. 3. * * Project Construction Plan ** - Planning the construction layout of the project, such as the planning and design of workshops, warehouses, and other buildings. 4. * * Construction Management Plan ** - To formulate management measures during the construction of the project, including project progress management, quality management, safety management, etc. * * V. Project Operation Plan ** 1. * * Production and Operation Plan ** - Planning production processes, production plans, quality control measures, etc. 2. * * Security Plan ** - To ensure the safety of the production process, such as the development of safety production systems, employee safety training plans, etc. 3. * * Operation Management Plan ** - It involved all aspects of business operations, such as human resource management, financial management, marketing, and so on. * * 6. Project Investment and Finance Plan ** 1. * * Estimated investment ** - Calculating the total investment of the project in detail, including construction investment, circulating funds, etc. 2. * * Proficiency Analysis ** - Predict the profit of the project, such as sales revenue, cost, profit and other indicators. 3. * * Analysis of financial stability ** - To evaluate the financial durability of the project in the long run, such as the recovery of funds and the ability to repay debts. * * VII. Analysis of Project Impact ** 1. * * Analysis of economic impact ** - Analyzing the contribution of the project to the local economic development, such as increasing employment and driving the development of relevant industries. 2. * * Social Impact Analysis ** - Consider the impact of the project on society, such as the impact on the lives of local residents and social stability. 3. * * Analysis of ecological environment impact ** - To evaluate the project's impact on the environment, such as the discharge of waste water, waste gas, waste residue and treatment measures. 4. * * Resource and energy utilization effect analysis ** - Analyzing the utilization efficiency of resources (such as raw materials) and energy (such as electricity, steam, etc.). * * 8. Project risk management plan ** 1. * * Identification and Evaluation of the risks ** - To identify the risks that the project may face, such as market risks (changes in market demand, increased competition, etc.), technical risks (immature technology, rapid technology replacement, etc.), management risks (poor project management, etc.), and carry out risk assessment. 2. * * Risk-Control Plan ** - For the identified risks, corresponding risk response measures were formulated. For example, market risks could be dealt with through a multi-market strategy, and technical risks could be dealt with by increasing R & D investment. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Preparing the project proposal of the NanNing City
The project proposal (also known as the project establishment application) is a proposal document for a specific project proposed by the project construction unit or the project legal person according to the development of the national economy, the national and local medium and long-term planning, industrial policies, productivity distribution, domestic and foreign markets, and the internal and external conditions of the project location. It is a framework for the proposed project. The main contents include the general situation of the project, the necessity and basis of the project construction, the preliminary assumption of the proposed scale and construction site, the preliminary analysis of the resources and construction conditions, the estimation of investment funds and the assumption of loan repayment plan, the schedule of the project, the preliminary estimation of economic and social benefits (including preliminary financial evaluation and national economic evaluation), the preliminary plan of environmental protection, fire protection, safety and hygiene, and the suggestions, conclusions and attachments on whether to implement the agent construction system for the project. These requirements should also be followed when preparing the project proposal, covering the relevant content to provide a basis for the initial stage of the project development cycle. It is also the basis for selecting projects and carrying out feasibility studies. If the project involves the use of foreign capital, it can only be carried out after the project proposal is approved. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Zhongshan City Preparing Project Suggestion
Based on the available information, I only know that the maternal and child health building of Zhongshan Bo 'ai Hospital has a project proposal preparation service. However, there is not enough information about the overall situation of Zhongshan City's project proposal preparation, such as the preparation process, standard requirements, and the main fields involved. Sorry, I can't give an accurate answer. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Preparing the conditions for the evaluation of teachers 'professional titles
The conditions for the establishment of a teacher's professional title evaluation mainly included the following aspects: ##1. Basic Requirements 1. * * Political ideology and professional ethics **: support the leadership of the Chinese Party, love the motherland, abide by national laws and regulations, implement the educational policy of the party and the country, be loyal to the people's education, love their jobs, teach and educate people, be a teacher, have good political quality and professional ethics. At the same time, the annual assessment must be more than qualified since taking up the post. If the annual assessment is "basically qualified" or has been given a warning punishment, the teacher's title shall not be declared in the current year and the next year. If the annual assessment is "unqualified" or has been given a demerit or more punishment, the teacher's title shall not be declared in the current year and shall not be declared within 2 years from the next year. Those who forge academic qualifications, qualifications, achievements, plagiarize other people's achievements, etc. will be disqualified from applying for the teacher's title in that year, and will not be allowed to apply for it for three years from the next year. 2. * * Teacher Qualification **: Obtain the corresponding teacher qualification. This is the basic prerequisite for the evaluation of a professional title. 3. * * Physical health and work performance **: In good health, able to fully perform the duties of the post and complete the required teaching or research tasks. 4. * * Continuing Education **: Complete the required continuing education tasks and pass the examination. This will help improve the teacher's professionalism and teaching ability. ##2. Requirements for Education and Years of Service 1. * * Level 3 Teacher (Member Level)** - He had graduated from a college and had completed a one-year probation in primary and junior high school. - Possess a graduate degree from a secondary normal school and pass the examination after completing a one-year probation in a primary school education teaching position. 2. * * Level 2 Teacher (Assistant)** - Master's degree. - Possess a bachelor's degree or a bachelor's degree, and pass the examination after the one-year probation period. - With a college degree, and in primary school, junior high school level three teacher positions for more than 2 years. - A graduate from a secondary normal school and has been a Grade 3 teacher in a primary school for more than 3 years. 3. * * Level 1 Teacher (Intermediate)** - Possess a PhD. - Master's degree, and have been a second-class teacher for more than 2 years. - A bachelor's degree or a bachelor's degree and have been a second-class teacher for more than 4 years. - With a college degree, and in primary school, junior high school level two teachers teaching positions for more than 4 years. - He has graduated from a secondary teacher's college and has been a second-class teacher in primary school for more than 5 years. 4. * * Advanced Teacher (Deputy Advanced)** - Possess a Ph. D. degree and have been a first-class teacher for more than 2 years. - Master's degree, bachelor's degree, bachelor's degree, and more than 5 years of teaching in a first-class teacher position. - Having a college degree and teaching in primary school and junior high school for more than 5 years. - In principle, urban primary and secondary school teachers must have more than one year of teaching experience in weak schools or rural schools. 5. * * Senior Teacher (Senior)**: Have a bachelor's degree or above and have been a senior teacher for more than 5 years. ##3. Other Requirements 1. * * Education Job Requirements ** - At least 6 years as a homeroom teacher, or at least 7 years as a team counselor, instructor of extra-cursory activities group, or other educational management work. At least 2 years as a homeroom teacher, or at least 3 years as a team counselor, instructor of extra-cursory activities group, or other educational management work. He or his class, team and other student management work has been awarded more than 2 times. 2. * * Teaching Job Requirements ** - Since he started teaching, he had served as a major cycle teaching job or a minor cycle teaching job twice, or served as a graduating class teaching job for three times. Complete the required teaching workload. Every academic year, students 'satisfaction with their classroom teaching reaches more than 85%. Open classes above the school level for more than 5 times, including more than 4 times between schools or more than 2 times at the county (city, district) level. The teaching quality of the open class is high and is well received; or obtain the second prize of the evaluation class (teaching basic skills competition) at the county (city, district) level or above or the third prize at the municipal level or above. 3. * * Teaching experience requirements for rural schools (partial)** - At least 3 years of working experience in rural schools or 3 years of teaching experience in rural schools and weak schools. 4. * * Thesis and teaching requirements ** - It required high-quality academic papers that could be published in both educational journals and disciplinary journals, and the journals needed to be published with both journal numbers. Teaching quality classes, observation classes, demonstration classes, or independently writing education and teaching research papers published in the journal, or guiding students to win awards in subject competitions, etc., were also helpful in the evaluation of professional titles in terms of education and teaching level and work performance. 5. * * Requirements for specific administrative duties (if any)** - Those who have held administrative positions in middle schools, primary schools, kindergarten schools, and gardens for more than one year must obtain the corresponding level of school and kindergarten director training certificate. - Teachers of urban primary and secondary schools (excluding those of a certain age) who were promoted to senior teachers of secondary schools or primary schools should have more than one year of teaching or teaching experience in rural primary and secondary schools or weak schools, or complete the supporting tasks stipulated by the local education department, such as counterpart support, pairing guidance, sending classes to the countryside, etc. In addition, with the development of education, the introduction of new elements such as the smart education platform may also have a new impact on the evaluation of professional titles. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Work report: animation graduation project proposal report
The following is an example of an animation graduation project proposal: ** 1. Purpose and significance of the design (thesis)** 1. ** Purpose * - Through the graduation project and thesis, he would use the knowledge he had learned in university to create an animated short film independently. He would be familiar with the animation production process and train his ability to control and solve practical problems in all aspects. - Understand the overall situation, production, and economic concepts needed to produce cartoons, and establish professional design thinking and a serious work attitude. - To train the ability of literature search, data query methods, and the ability to acquire new knowledge. - Proficient in drawing, computer application and other basic skills, with experimental research ability, able to write papers and reports correctly, using national standards and technical language to explain theoretical and technical problems. - Cultivate a sense of innovation and a serious work attitude. 2. ** Meaning ** - Through the design, one could gain an in-depth understanding of the history of a specific historical period (such as the Northern Zhou Dynasty, which was related to the topic), including architectural styles, clothing characteristics, cultural development, appellation, and language habits. It expanded from local history to a larger historical background, such as the development process of the Wei, Jin, Southern and Northern Dynasties and the Sui and Tang Dynasties. - Through the thesis, I will have a macro understanding of ancient China art and culture, classify and absorb the nutrition of traditional plastic arts, and analyze the national elements in excellent foreign cartoons to deepen my understanding and experience of the plastic arts of animation. The graduation project and thesis were the last assignments in school. They were practical, comprehensive, exploratory, and applicable. They provided comprehensive training and internship opportunities to meet the requirements of animation talents and the cultivation of psychological quality. ** II. Design (thesis) task, key research content, technical proposal and schedule ** 1. ** Quest ** - He was going to do his graduation project and thesis. - Complete the script, screenshots, and design drafts. - Character design and background design. - Production of original art and animation. - Post-production editing. - Add sound effects and dialogue. - Creating the opening and ending credits. - Make an exhibition. - Print and bind the thesis into A4 text. 2. ** Key research content ** - The creation of a script should be based on historical facts, have a clear creative idea, and fully consider the orientation of the topic and the creative characteristics. - The storyboard had to describe the story clearly and completely, and it had to be recreated based on the overall idea. - Character design and scene design required historical and modern life materials to be processed into animated images, and reference to ancient murals, architecture, clothing, and other materials (depending on the topic). - Mechanics, expressions, mouth shapes, motion patterns, etc. must be considered in animation production. - The background music had to be selected according to the plot. 3. ** technical proposal **(This can be explained according to the specific animation production software and tools, such as using the Adobe Animate for animation production, Adobe premiere for post-editing, etc. Since the reference materials did not explicitly mention it, it can be supplemented according to the common animation production process) - In the aspect of character design, he used drawing software to draw the character's sketches and line drafts, and to determine the character's shape, color, and style. - For the background design, according to the needs of the story scene, use drawing tools or 3D modeling software (such as Benders for simple 3D scene construction) to create the background environment. - In the animation production process, according to the animation motion law, frame by frame drawing or using key frame animation technology to produce the character's movements. - During post-editing, the animation clips, sound effects, dialogue, and other materials would be edited and combined according to the order of the screenplay, adjusting the rhythm and the effect of the scene. 4. ** Progress **(The following is a rough example of the schedule, which can be adjusted according to the actual situation) - The first stage (topic selection and preliminary preparation stage):[specific time period 1], complete the graduation project and thesis selection, collect and study relevant information, and determine the initial story idea. - Stage Two (Script and Design Drawing Stage): Complete the script, screenshots, characters, and background design drafts. - Stage Three (Production Stage):[Time Period 3]. Production of original art and animation, including character animation, scene animation, etc. - The fourth stage (post-production stage):[specific time period 4], post-editing, adding sound effects and dialogue, and making the opening and closing credits. - Stage Five (Collate and Submit Stage):[specific time period: 5], create exhibition version, complete thesis printing and binding, and submit graduation design and thesis. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Method for Preparing Site Selection Study Report
The following are the relevant contents of the preparation methods of different types of site selection research reports: ** I. Preparing the site selection research report for the Land Rectification Project in Hubei Province ** 1. ** General Principles ** - In order to regulate the preparation of the feasibility study report of the land renovation project (including the relevant content of the site selection), the method was formulated according to the relevant policies and regulations, standards and specifications, and combined with the actual situation of Hubei Province. - The feasibility study should be based on the project's basic conditions, technology, funds, benefits, organizational management and other aspects of detailed research and demonstration. 2. ** In terms of programming ** - Sign the commission agreement: specify the project name, scope, content, etc. - Set up a working group: The members should include professionals in land, agriculture, forests, water conservancy, etc., and they should be familiar with local agricultural production and engineering construction. - Work out a work plan, including the research scope, focus, depth, progress, etc., and exchange opinions with the client. - Field survey: Collect project information. - Analysis and research: analyze the nature, social economy and other aspects of the project area, design different planning schemes, and compare and prove the selection scheme and conclusion. - Project benefit analysis: the social benefit, ecological environmental benefit, economic benefit evaluation and risk analysis of the recommended scheme shall be carried out. The indicators do not support the adjustment or re-design of the project scheme when it is established. - Prepare the feasibility study report, including the text, current situation map and planning map. - Exchange opinions with the entrusting unit: modify and perfect to form the final product. 3. ** Report content and requirements (related to site selection)** - General Remarks: - Project background: State the name of the project, the organization, the basis, the reason and process, the expected goal, and the basic conditions of the construction. - Project summary: specify the county (city, district), type, nature, location and scope, landscape type, construction scale, land ownership status, estimated newly-increased cultivated land area and newly-increased cultivated land rate, construction period, total investment and average investment per mu, etc. - Project Area: - Natural conditions: analyze topography, soil, water, and engineering. - [Resource conditions: Analysis of agricultural climate resources, water resources, biological resources, etc.] - "Social and economic status: analyze the level of economic development, population, and technological development. - Land use situation: analyze the land use structure, development and utilization degree, and economic effect of land use. - Basic infrastructure conditions: analysis of traffic, irrigation and drainage system backbone facilities, power facilities, etc. - Project analysis: - Analysis of the project's legitimacy and compliance, including whether it meets the requirements of laws and regulations, whether it meets the overall land use planning, and whether it meets the special land renovation planning. - Potential analysis of new cultivated land: State the amount and source of new cultivated land. - Water resource balance analysis: It covers irrigation water sources, water demand prediction, water supply prediction, and water resource supply and demand balance analysis. - Analysis of land use constraints: Explain the constraints and propose solutions. - Land adaptability evaluation: Explain whether land use should be adjusted, the consequences and impacts of adjustment, and how to adjust. ** II. Prepare the site selection report for the construction project (Shanxi Province as an example)** 1. ** General Principles ** - In order to regulate the preparation of the construction project site selection research report, the guidelines were formulated according to the "Construction Project Site Selection Planning Management Execution Method" and relevant regulations of the Shanxi Province Construction Department. It is applicable to the preparation of the construction project site selection research report as stipulated in the eighth article of the "Construction Project Site Selection Planning Management". Other projects can refer to it. - The site selection of the construction project should take into account the current situation and requirements of regional economic and social development, resources, environment and infrastructure conditions, and follow the principles of urban and rural planning and relevant standards, industrial policies, environmental protection, farmland protection and sustainable development, industrial development, urban and rural functions improvement, rational allocation and utilization of urban and rural spatial resources, protection of public interests, improvement of living environment, and guarantee of urban and rural public safety and project construction safety. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Is there any responsibility in preparing the feasibility study report?
The unit and staff responsible for the preparation of the feasibility study should meet certain requirements and bear corresponding responsibilities. The compiling unit shall have the qualification level certificate approved and registered by the relevant departments of the state, and have the ability and experience to undertake the preparation of the feasibility study report; the compiling personnel shall have the professional title of intermediate or above in their profession, and have relevant knowledge, skills and work experience. The compilation unit and personnel shall adhere to the principles of independence, fairness, science, and reliability, seek truth from facts, and take full responsibility for the quality of the feasibility study report provided. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Qualification for preparing chemical feasibility study report
If the purpose of the chemical feasibility study report is to be approved by the National Development and Change Committee or relevant departments, or the project owner is a state-owned enterprise, the preparation unit of the feasibility study report is generally required to have engineering credit qualification (i.e. Class A or Class B credit) or other relevant qualifications. If the project feasibility study report was only used for internal decision-making and cooperation, or if the project owner was a private enterprise or a general social organization, this kind of feasibility study report did not need professional qualifications. It was enough as long as it could meet the requirements of the project. However, for the projects of the National Development and Reformist Committee, the State Administration of Finance and Information Technology, the Commerce Committee, and the government departments (used for project establishment), bank loan projects (used for loans), and overseas investment projects (used for project establishment by the National Development and Reformist Committee), Class A qualifications are generally required. Small projects generally require Class B qualifications. Generally, projects with an investment of more than 10 million yuan require Class A engineering consulting qualifications. Investment decision-making projects (used for investment decision-making) do not require qualifications. The specifics would depend on the project and other relevant factors. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Preparing the feasibility study report of municipal projects
The preparation of the municipal project feasibility study report needed to follow certain basis and principles, and cover many aspects of content. ** I. Establishment basis ** 1. ** Regarding policies and regulations ** - National policies and regulations, such as the Law of the People's Republic of China on the Protection of the Earth, the Law of the People's Republic of China on the Conservation of Energy, the Law of the People's Republic of China on the Planning of Cities and Villages, and the Law of the People's Republic of China on the Conservation of Water and Soil, etc. - The relevant opinions of the General Office of the State Council, such as the opinions on strengthening urban infrastructure construction, and the relevant policy documents issued by local governments, such as the opinions on accelerating the development of traffic construction in Qiandongnan, Qiannan, and Qiannan autonomous prefectures, and the implementation plan of the three-year action plan for urban infrastructure construction in Qiannan Prefecture (2015 - 2017), etc. 2. ** Evaluation methods, parameters, and specifications ** - It shall be based on the current evaluation methods, parameters, and specifications officially issued by the state and local governments, such as the Methods and parameters for the economic evaluation of construction projects (third edition) and the Guide to the feasibility study of investment projects (trial edition). 3. ** Regarding technical regulations and industry standards ** - They must follow the current technical regulations and industry standards officially issued by the state and local governments. 4. ** Other Bases ** - Including the approval of the local development and reform bureau of the experimental area, other basic information provided by the project organizer, as well as basic information about nature, geography, weather, astronomy, geography, economy, society, etc. ** II. Establishment Principles ** 1. ** Planning first, scientific and reliable principles ** - According to the national technical specifications on road traffic and urban planning, with reference to local standards, the important nodes shall be planned according to the traffic organization needs. 2. ** The principle of orderly hierarchy and organic smoothness ** - Clearly divide the expressway, main road, secondary road, and branch road to form a reasonable road system. Comprehensively consider the road's horizontal line shape, vertical line shape, cross-section combination, road intersection and other factors to ensure that the technical requirements for pedestrian traffic and vehicle driving are met. 3. ** Function first, aesthetics first ** - While meeting the requirements of urban planning for the network structure of the road system and the functional needs of the traffic system, it also took into account the landscape design and aesthetic requirements, because the road had both traffic and landscape functions. 4. ** Overall consideration, principle of unification of two benefits ** - Project construction should highlight social benefits, attach importance to economic benefits, enhance development vitality, achieve sustainable development, and play the role of demonstration and driving regional economic development. 5. ** Principle of being objective, fair, and realistic ** - To ensure that the data is accurate, the content is complete, the key points are prominent, and the conclusion is scientific. On the basis of investigation and research, the evaluation and analysis are carried out strictly according to the objective reality. ** 3. Research scope and key research issues ** 1. ** Research Range ** - After being entrusted by the undertaking unit of the project, the preparation personnel shall conduct field reconnaissance and investigation on the construction site of the project, collect basic information, and discuss and communicate with the person in charge of the undertaking party. According to the regulations of the National Development and reform commission on the preparation depth of the feasibility study report of the construction project, the preparation personnel shall provide the background, necessity of construction, demand analysis, project address and construction conditions, project construction plan, environmental impact assessment, water and soil erosion prevention and control plan, energy conservation assessment, labor safety and hygiene, Project management and implementation progress, project bidding plan, investment estimation and fund raising, comprehensive benefits, social stability risks and other aspects of comprehensive analysis and demonstration, providing a basis for investment decision-making and preliminary design. 2. ** Focus on Research Questions ** - Focus on the background of the project implementation and the necessity of construction; determine the project construction scale and content according to the overall planning of the local economic development zone and the current situation of the road network in the project area; analyze the technical scheme and select a scientific, reliable and economical engineering construction scheme; estimate the total investment of the project construction and propose the fund raising scheme; comprehensively analyze the economic and social benefits of the project and make the benefit evaluation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>