The lens shift would not affect the image quality because it was a physical movement of the lens. The up and down lens shift allowed the projected image to move up and down. In the left and right lens shift, a large range of left and right lens shift could be used for side projection without losing the quality of the image. However, only high-end phones from Sony and Epson on the market had a large range of up, down, left and right lens shift. Read more exciting novels for free
Projection distance referred to the distance between the projection lens and the screen. It was usually measured in meters. It was related to the projection size. The larger the distance between the projector, the larger the image size; the smaller the distance, the smaller the image size. The calculation method of the installation distance is as follows: the minimum installation distance (m)= the minimum projection ratio × the width of the projection screen (m), and the maximum installation distance (m)= the maximum projection ratio × the width of the projection screen (m). For example, in a living room with a total area of 25 square meters, a projection size of 80 - 100 inches was more suitable. When the distance between the projection lens and the screen was less than 4 meters, the projection size was best controlled to be less than 100 inches. If it was more than 4 meters, it was suitable to project a large image of more than 100 inches. In practical applications, in order to obtain a large image in a small space, a projector with a wide-angle lens could be used, which could obtain a larger projection image size at a shorter projection distance. In the theater and auditorium, where the projection distance was very long, a projector with a telefocal lens was needed to obtain a suitable image size at a longer projection distance, so as to avoid the image from exceeding the screen size. An ordinary projector was a standard lens, which was suitable for most users. In addition, for the first time, Epson's Q series 4K laser high-end flagship home theater projector was equipped with a variety of optical lenses in home projection products. The most suitable installation distance and solution could be tailored according to different spatial environments. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The quality of Honghe's projector was very good. Honghe was a well-known projector brand with a high reputation. Its products had undergone strict quality control and testing, ensuring stability and reliability. The laser projection technology used by Honghe Laser Projecting Machine could provide a clearer and brighter projection effect. The image was delicate and realistic, with a long service life and low power consumption. It had high brightness and contrast, and could display clear images in various environments. It supported a variety of ports and projection methods, making it convenient for users to use and connect. It also provided good after-sales service to protect the rights and interests of users. For example, the Honghe Laser Projecting Machine, the RH-V1000, had built-in intelligent focusing technology that could automatically focus according to the projection distance to make the image clearer. It also had intelligent technologies such as automatic vertical correction and remote control. The Honghe Laser Projecting Machine, the HSK5021, was equipped with 3LCD high-quality color display, a 30,000-hour long life light source, a direct projection short-focus lens with a projection ratio of 0.44: 1, a zero-second instant shut down, and an ultra-portable installation and adjustment. It was super stable, reliable, and efficient. Its brightness, resolution, and other indicators all showed that the quality of the projector was excellent. " A Short History of the Future: Legends of the Intelligent Era " was equally exciting. Everyone was welcome to click and read it!
Model house photography did not necessarily require the use of a shift-axis lens. When there was no shift-lens, you could first consider using an ordinary ultra-wide-angle zoom lens (such as 17 - 40mm, 16 - 35mm) to shoot. However, the shift-axis lens had its own unique advantages in model house photography. For example, it could change the perspective of the image, achieve special shooting effects through tilting, shifting, and rotating movements, such as controlling the focal plane, changing the shooting range, and solving the problems of different magnifying rates and disparity at the far and near ends. If you wanted to better control the composition, focus, and perspective effects of the picture in the sample house photography, a shift-axis lens was a good choice. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Different single-lens reflex telephoto lenses had their own characteristics. For example, 85mm f1.2 was easy to run out of focus when the aperture was fully open and the purple edge was a little serious, but it could present beautiful pictures when shooting portraits or still lives;70 - 200mm f2.8 was one of Canon's big three yuan, with a wide focal range and no obvious shortcomings in image quality;100 - 400mm f4, in addition to being heavy and not having a large aperture, had sharp image quality; 50mm f1.8 "small spittoon" had average image quality, but it was cheap; The 24 - 70mm f2.8 Canon lens was more versatile, but the aperture was not large enough. The RF100 - 400mm F5.6 - 8IS USM lens was light and sharp. The Canon EF50mm F1.8II had a F1.8 large aperture circle focal lens, which made the background blurred and beautiful. The Canon EF40mm F2.8ATM had advantages in workmanship, overall quality, and performance, and the picture quality was excellent. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Here are some recommendations for high-quality DSLR lenses: - Canon EF70 - 200mm F2.8LIS II USM: Excellent optical performance and image quality. 70 - 200mm focal length is suitable for portrait, scenery, and short film shooting. It is cost-effective. The second-hand reference price is 6000 - 7800 yuan. It can even meet the demand of the flagship model 1DX3. - Canon EF35mm F1.4L II USM: Compared to the first generation, the overall improvement is greater. The addition of the AR lens greatly improves its quality, good color performance, excellent dispersion control, and the second-hand reference price is 5500 - 7000 yuan. - Canon EF100mm F2.8L IS USM: The autofocus speed is ideal for macro shooting. It has a good performance in both macro and portrait shooting. It is also popular in the second-hand market. The reference price of second-hand is 3000 - 3800 yuan. - Canon EF135mm F2LIS USM: 135mm focal length belongs to portrait close-up lens, which can bring a strong sense of compression and good blurring effect. It has fast focusing speed, 750g lens body weight, excellent image quality with full aperture, sharp in focus and soft outside focus. It uses two large UD ultra-low dispersion lenses, ideal dispersion control. The second-hand reference price is 3000 - 4200 yuan. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
There were advantages and disadvantages to both the LCD projector and the LCD projector. It was not easy to determine which one was better. The following analysis was done from many aspects: ** 1. Principle of imaging ** - ** DLC projector **: Based on digital optical technology, it reflects light through the PDD chip. Among them, the PDD chip was a reflective surface composed of tens of thousands of micro-lenses, each of which represented a single pel. When working, light from the light source is directed to the surface of the MDD chip, and the lens changes the slope back and forth, causing the light to be reflected to the lens path to turn on or off the lens path. In order to define the color, a color wheel containing red, green, and blue filter was needed. The color wheel rotated on the light path between the light bulb and the MDD chip, and the micro lens reflected the light in real time according to the color requirements of each pel, thus producing an image projected on the screen. In high-end professional applications, the use of three separate MDD chips (three-chip DPS technology) could achieve purer and more accurate colors, but the cost and size were also greatly increased. - **LCD projector **: It is a liquid crystal display technology. It consists of three independent LCD glass panels (corresponding to the three video signal components of red, green, and blue). The 3LCD technology is more common. Each LCD panel contained many liquid crystals, which worked like shutters or shutters. They could be arranged to open, close or partially close to control the amount of light passing through. When red, green and blue passed through different LCD panels, the liquid crystals opened and closed based on the color requirements of the pixels', and the light was adjusted to produce a projected image. There were also models with an LCD panel that were suitable for entry-level home entertainment scenes, but the brightness was relatively low. ** 2. In terms of performance indicators ** - ** Brightness ** - ** DLC projector **: Compared with 1LCD projector, the brightness index of the DPS projector is a breakthrough. The optical machine efficiency is relatively high, and the light loss is relatively low. Therefore, it can output higher brightness under the same light source. This allowed the DLC projector to have a better projection effect in a brighter environment (such as a room that was not completely blocked during the day). - **LCD projector **: The light consumption of the projector with LCD technology is relatively serious. The effective light that can be projected on the screen is often less than 3% of the total light emitted by the light source. Therefore, the overall brightness is not high. When using it, it has a high requirement for the surrounding light. Generally, it can only have a better projection effect in a darker environment (such as closing the curtains at night or during the day). However, with the development of technology, the brightness of the single LCD projector was constantly increasing. - ** Comparisons and Image Quality ** - ** DLC projector **: High contrast and image quality, and the projected image is clear, especially when displaying black parts. It can show a good sense of layering, suitable for watching movies and other scenes that require high image quality. - **LCD projector **: The contrast is relatively low, and the projected image may produce halation. The black level of the image is not very good, and the overall image quality is slightly inferior in this aspect. - ** Color expression ** - ** DLC projector **: It has a wider color range and can display richer colors, especially red and green. - **LCD projector **: The color performance is average. - ** resolution ** - ** DLC projector **: Compared to 1LCD projector, the resolution of the DPS projector is a breakthrough. In addition, the use of three-chip DPS technology in high-end applications could achieve higher resolution and make the picture more exquisite. - **LCD projector **: The resolution of a model with a single LCD panel is relatively low, but the 3LCD technology can also meet the general usage requirements in terms of resolution. ** 3. Other aspects ** - ** Service Life ** - ** DLC projector **: Its lifespan is mainly determined by the PDD chip and the color wheel. It can be used for many years and is still stable and reliable. - **LCD projector **: The lifespan of the LCD panel is relatively long, but the lifespan varies according to the brand and technology. - ** Price * - ** DLC projector **: The price of a DPS projector is 3000 or 4000 yuan, which is relatively high. However, different brands, models, and specifications would have a large price difference. - **LCD projector **: Single LCD projector is generally not expensive. Most of them are between 1000 - 2000 yuan, and some are less than 1000 yuan. The cost-performance ratio is relatively high. ** 4. Market share ** - In the first half of 2024, the single LCD projector market share was 68.6%, an increase of 5% from the first half of last year. During the 11/11 promotion period in 2024, 1LCD technology accounted for 50.1% of sales, down 20.8 percentage points from the first three quarters of 2024. The sales share of the overall online market reached 47.0%, 19.4 percentage points higher than the first three quarters of 2024. When choosing a LCD projector or a LCD projector, you need to consider the specific needs, environment, budget, and other factors. If it is often used in a brighter environment, has high requirements for color and picture quality, and has a sufficient budget, you can give priority to a DLC projector; if the budget is limited and it is mainly used in a darker environment (such as bedroom viewing), an LCD projector is also a good choice. The novel "Mars of Paradise" is equally exciting. Everyone is welcome to read it!
The inspection of the DSLR lens can be carried out in the following aspects: 1. ** Appearance ** - ** Lenses Inspection **: Slightly tilt the front and back ends of the lens to a bright spot, observe the reflected light on the surface of the lens from the side, and check if there is any slight scratch on the coating layer. At the same time, observe from all angles of light and backlighting, and use a light source to carefully check if there is any obvious trauma on the front and back lenses. In addition, when selecting second-hand lenses, a small amount of oil or traces of use were normal, but the lenses needed to be checked. - ** Mirror body stability **: Check whether the lens is loose. The ruler lines, numbers, and letters on the lens barrel and adjustment ring should be clear and beautiful regardless of whether they are directly printed or concave. - ** Aperture lever **: Check the aperture lever to ensure that the aperture is opened and closed normally without any stagnation. 2. ** Function ** - ** Zooming and focusing ring test **: Turn the zooming ring and focusing ring. Under normal circumstances, the rotation should be light and uniform. - ** Manual Focus Test **: Turn the focus ring slowly and observe whether the focus ruler in the focus window is bi-directional synchronized. Then, turn the focus ring quickly to check whether it is synchronized. If it is not synchronized, there will be a problem if the focus ring needs to be rotated quickly to focus. - ** autofocus test **: After installing the lens, cover the lens with your hand and press the shutter halfway. Under normal circumstances, the lens 'focus scale will go from infinity to the closest focus distance and then back to infinity. If there is a stutter, a shake, or a manual focus ring rotation, it is abnormal. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The image quality of the Sony24 - 105 lens was higher. It was a Master-grade lens from the Sony-G series, with clear picture quality and vibrant colors. In the user evaluation, the overall score was good. Some users thought that the imaging effect was very good and could meet the shooting needs. For example, it performed well in portraits, street photography, macro, scenery, architecture, sports, and sports scenes. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The star projector was an entertainment projector. Some of the star projector could display more than 12000 stars of magnitude 6.5 in the northern hemisphere sky, and the star projection could be viewed in the bedroom (without light pollution, air pollution, etc.) for 365 days, regardless of wind or rain. There were also products of different brands and models such as the Star Wars series Dark Warrior Star Projecting Device, with a price reference of $443. There were also some star projector for smart homes on the market. For example, the Zhizhi Yuyin star projector had high-definition cloud platform projection, mobile phone projection, mini portable and other features. In addition, the star projector was also used as a graduation gift. For example, in the 3D star projection show of the 2024 graduates of Southeast University, the names of the graduates shone one by one, turning into the brightest stars in the night sky. In this way, they sent romantic graduation gifts, hoping that the graduates would experience the power of dreams and go to the future with the love and expectations of their alma mater. The novel "Mars of Paradise" is equally exciting. Everyone is welcome to read it!
There were some channels that could obtain high-quality audio resources from Dolan's concert. For example, there was a store selling a Blu-ray high-quality car music collection USB drive for the Daolang 2024 concert. The price was 38.8 yuan, and there was also a double 11 discount (50 yuan for every 300 yuan). In addition, there was also a 32G USB flash drive that contained the songs of Daolang's new album. It contained the eleven songs of Daolang's new album, all his old songs, and all the songs of Yunduo. It had 15 times the quality of the sound without loss and had a license. It could be used on Android and Huawei phones. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>