Review of domestic camera lens
The following were the reviews of some domestic cameras: ** 1. Ming Craftsman AF75mm F2 lens ** 1. ** Basic Information ** - This was an autofocus lens launched by Ming Craftsman Optics for Sony and Nikon mirrorless cameras. It had a focal length of 75mm and was equipped with an E2 aperture. It was designed for full-frame use and was priced at about 1180 yuan. It was cost-effective. 2. ** Build Quality ** - The size and weight were moderate. It was made of metal and felt good and solid. However, the lens was not equipped with a sealing ring and did not have the function of dust and water resistance. However, the metal rear bayonet and lens cover were sturdy and durable. - There was a USB port on the side of the lens, which reserved space for the hardware update. 3. ** Operation ** - It was not equipped with an autofocus switch, but it had an aperture ring that rotated smoothly. There was a clear click sound feedback every one-third of the aperture value. However, the clicking sound when the aperture was switched was relatively light, and there were occasional situations where the operation was not completely in place. - The manual focus ring rotated smoothly, and the focus motor responded quickly and accurately. However, there was a breathing effect during autofocus, which could cause trouble during video shooting. There was a problem with the accuracy of autofocus. About 20% of the time, the camera could not accurately lock onto the subject. 4. ** Image Quality ** - On a full-frame camera (such as the SonyA7R3), the center clarity and contrast under the F2's maximum aperture were impressive, and the image quality in the corners was slightly softer. When the aperture was reduced to F2.8, the brightness of the picture increased. At F4, the contrast was enhanced and the layers were richer. However, the sharpness did not increase significantly at F4. At F11 and below, the sharpness could be maintained. At F16, the picture was slightly softer due to the influence of the refraction effect. - On a 24-million-pel half-frame camera, the center clarity and contrast were still excellent at F2's maximum aperture, but the image quality in the corners was significantly softer. When the aperture was reduced to F2.8, the image quality in the corners did not improve significantly. ** 2. Meike 50mm F1.8 lens ** 1. ** Basic Information ** - It was a double-material design with an alloy mirror body and a composite front end. Due to the low price, the aperture ring was removed, and only the focus lever was retained. It wasn't small, but it wasn't the heaviest. 2. ** optical structure ** - The optical part was composed of 7 groups of 11 lenses. There was only one low-dispersion lens, and no aspheric lens was used to correct aberrations. 3. ** Image Quality ** - It could maintain a good central sharpness under the full aperture. There was no obvious dispersion on the 45-million-pel model, but there was obvious quality deterioration at the edge of the picture. When the aperture was reduced to F4, the resolution reached an excellent level. Read more exciting novels for free
Review of domestic single-lens reflex camera and portable cloud platform
The following is the situation of some domestic single-lens reflex lenses: ** 1. Zhiyun ** 1. ** Cloud Crane M3** - Design innovation: - It had the characteristics of " small body, large load " and continued Zhiyun's " lightweight " design route. It was light and comfortable to hold. The size of the body was like holding a 550ml bottle of mineral water, but it could stably carry a full-frame non-reflective camera for shooting. - It was the first ecological solution for shooting scenes with integrated lighting and microphone. 2. ** WBEBILL 2 Smart Cloud Platform ** - Design advantage: - He could switch to the teapot mode at any time without any accessories or changes in shape. - A 2.88-inch embedded smart touch screen was added to the left side of the body, which supported flipping operation, making it convenient to monitor the experience and adjust the relevant settings directly on the screen without the need for a third-party app. ** 2. Flying Universe Stabilizer Scorpion 2** - Function: - It was specially designed for stable single-lens reflex cameras. The reference price on Jingdong was 1999 yuan. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What is the lens of the camera lens?
Based on context alone The lens of the camera lens was made up of many different types of lenses. This included a concave lens, which had a thick middle and thin edge structure. It had a converging effect on light, which helped to focus the light on the imaging plane, making the image clear. There were also concave lenses, which were thin in the middle and thick at the edges. They had a diffusing effect on light and were often used to correct aberrations. In addition, there were also aspheric lenses. These lenses were not the traditional spherical shape. They could better correct aberrations, improve image quality, and reduce image distortion and blurring. They were widely used in modern camera lenses. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
camera lens
A lens was an optical component composed of two concentric spherical surfaces surrounding a transparent medium (such as glass). It was an important component of a camera lens. It was composed of different focal lengths, lenses, and segments. Its main function was to form images, gather light, and obtain a parallel light source. It could bend and refracted light. Different focal lengths of the lens and the use of optical methods could change the perspective effect of the picture. A good lens could make the images and images clearer and more delicate. The lens of a camera could be divided into two categories: a concave lens (thicker in the middle than the edge) and a concave lens (thinner in the middle than the edge). In surveillance cameras, there are many different specifications of lenses, such as lenses with different angles (such as 9 degrees, 15 degrees, 30 degrees, etc.), different diameter, different lamp beads (such as 3030 lamp beads, 3535 lamp beads, etc.), and there are differences in materials, processing technology, and imaging effects. Some were made of optical-grade PC material and manufactured through high-precision aspheric optical processing technology. They had the characteristics of uniform light spots and no dark corners, which could effectively improve the image quality and make the camera better in different scenes to meet more needs. In addition, there was also the emerging technology of superlens technology, which used traditional semiconductor processing technology to build nanostructures on a flat surface to create lenses. This lens was very thin, only a few hundred millimeters thick, about twice the thickness of a human hair. It could also integrate the functions of multiple curved lenses into one device, helping to solve the problem of space constraints. It might bring new development directions for camera lens technology. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The camera lens changed to a projection lens
Some data showed that the telephoto projection could be used to change the camera lens into a projection lens, and a size image could be projected at a distance of 1.5 meters. He could also use a flashlight as the film's back light and a Nikon lens as the projection lens to make a simple projector and project the reverse film on the wall. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to disassemble the lens of the camera lens
If you want to remove the lens of a camera lens, here are some common steps: 1. Before doing anything, first make sure that the camera's power is turned off to avoid accidents. Prepare the necessary tools, such as a screwdriver, tweezers, and cleaning tools. 2. Removing the lens cover: The lens in front of the lens is usually protected by a lens cover, which needs to be removed first. Carefully use your fingers or tools to gently rotate the lens cover until it is loose and can be completely removed. 3. Loosening the fixing screw: Under the lens cover, there are usually a few fixing screws that hold the front lens. Use a suitable screw driver to loosen these screws, but do not completely remove them. 4. Removing the lens: After the screw is loosened, you can carefully use tweezers or fingers to remove the lens from the lens assembly. Make sure not to touch the surface of the lens to avoid leaving fingerprints or scratches. Different types of lenses might have different structures, so they needed to be handled carefully during the dismantling process. If you are not familiar with the operation, it is recommended to seek professional help. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The camera lens is expensive
In the field of photography, expensive lenses had their value. Generally speaking, more expensive lenses had higher performance in terms of optical quality, workmanship, and performance. For example, in the field of medium and long focal length lenses, Canon's RF70 - 200mm f/2.8L IS USM was priced at 16999 yuan, and the Sony70 - 200mm F2.8GM OSS II was priced at 18999 yuan. These lenses were expensive, but they could provide better imaging results, excellent focusing performance, and good durability on their respective cameras. However, with the changes in the photography market, the relationship between price and value did not completely follow the traditional principle of "you get what you pay". In the micro-monocle era, although some high-end lenses had improvements such as quieter focusing, better design, and improved electronic functions, compared to similar lenses in the DSLR era, users felt less about the improvement in optical quality, but the price generally rose. Some of the affordable entry-level lenses, such as the 50mm f1.8 lens, were no longer as affordable as before. Branded lenses of this size were even hyped up to three times the release price. 24 - 105mm f4 or similar lenses were nearly twice as expensive in the micro-single era as in the single-lens reflex era. Although the optical quality had improved, there was no particularly huge breakthrough. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The lens and camera interface
The lens and camera interface was a component used to connect the lens and the camera. Suzhou Ouka optical instrument factory specialized in the production and development of a camera interface, this interface can be connected to different brands and models of lenses, so that the camera can be used normally. There are many types of industrial camera cable ports: - **USB port **: It is a commonly used port for digital cameras. It can directly output digital image signals. USB was the full name of Universal serial bus. The interface was 4-pin, including 2 power cables and 2 signal cables. There were different versions of USB. The early USB2.0 interface was convenient and widely used, but the transmission rate was slow (480Mbit/s), the communication distance was short (5m), and the band width was mostly used for image transmission (80%). The transmission required the CPU to participate in management and consumed a lot of resources, and the interface was unstable. USB3.0 added two sets of data lines on the basis of USB2.0, which were backward compatible. The transmission speed was increased to 4.8Gbit/s, and the communication distance was extended to 10m. However, the transmission distance was still relatively short. USB interface cameras were easy to use and had a wide range of ports. They were widely used in microscopes, scientific research experiments, portable equipment, and other industries. At present, USB Type Micro-B ports were the mainstream on industrial interface cameras. In the future, USB Type C ports might be popularized. - ** IMEE1394 (Firewire Interface)**: It is a high-speed serial bus. It supports hot swapping, real-time data transmission, and uses a bus structure. It is widely used in the industrial field. It has good protocol and coding methods, and the transmission speed is stable. The 1394a's maximum transmission speed was 400mps, and the 1394b's maximum transmission speed was 800mps (3.2mps was relatively rare). Its interface was divided into 4-core and 6-core. The 4-core contained two pairs of data cables, and the 6-core had a set of power cables in addition to the data cable. This interface did not require a controller and could be used for peer-to-peer transmission. The 1394a's maximum transmission distance was 4.5 meters, and the 1394b's transmission distance was usually 10 meters (100 meters, 100 Mbit/s, when the data rate was reduced). However, the interface's penetration rate was low and it had been slowly eliminated by the market. - **Camerlink interface **: A digital image signal communication interface protocol introduced by the Aia Association. It is a serial communication protocol that uses the LVVS interface standard. It was developed from the Channel Link technology, adding the transmission control signal and defined the relevant transmission standards. The protocol used the MDR - 26-pin connection or the SAR- 26-pin connection, which had high speed (up to 6400Mbps), strong anti-interference ability, and low power consumption. However, it required a separate CameraLink interface, which was not portable, expensive, and rarely used in practical applications. - ** Gige Giga-bit ether interface **: created and promoted by Aia. It is a camera interface standard developed based on the Giga-bit ether communication protocol. It is suitable for industrial imaging applications. It can transmit uncompressed video signals over the network and can use low-cost cables to transmit images over long distances. In addition, in the field of machine vision, other data transmission ports were also developed: - **CoaXPress (CXP) interface **: launched in 2008, supports high-speed imaging applications, uses 75 Omega coax cable, supports data transmission speed of up to 6.25Gbit/s per channel, and can increase the transmission rate of multiple channels. Each cable can provide up to 13W of power. It requires the "device" and "host" to support the GenICam camera programming interface. However, the cost of installing multi-channel cable components and frame clips on a single-channel coax cable increases rapidly. - **CameraLink interface **: In 2000, it was launched by Aia Association and gradually upgraded.（2.04Gbit/s）、Medium (5.44Gbit/s) and Deca/Extended (6.8Gbit/s). Base uses an ADC- 26 pin, medium/full requires a second cable to double the capacity, Deca/Extended can transmit up to 6.8Gbit/s data, and like the CXP interface, it requires an image acquisition card that is compatible with the CameralLink power supply (PoQL) standard for power supply. It lacks error correction or resend functions. The cable setup was expensive and troublesome. - **GigE Vision standard interface **: It is managed by the Aia Association and allows the use of existing low-cost ether cables, connections, switches, and other components. Copper cables can transmit image data up to 100 meters away, and more data can be transmitted through the switch and optical fiber adapters. It has the potential to create different network topologies. Each camera can be placed on the network independently through an IP address. It can be viewed, controlled, and monitored from any PC on the network. However, the maximum 115mb/s has limitations for certain applications. However, NBUSE-T technology could increase the band width within its framework. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Surveillance camera with a lens
The surveillance camera was just a single video capture device. The resolution and resolution of the lens were higher than that of the computer's video head, but it could not catch up with professional digital cameras or DVs. In reality, cameras and lenses were mostly purchased separately. The user can calculate the focal length of the lens according to the size of the target object and the distance between the camera and the object to determine the required lens. The lens required by each user depends on the actual situation. It cannot be assumed that the camera (head) already has a lens and does not need to be equipped with another lens. The focal length of the lens determined the field of view of the camera. For example, a wide-angle lens was suitable for shooting in a large space and could capture more content. A telephoto lens was suitable for long-distance shooting and could see details in the distance. Indoors, they usually chose short focal lenses, such as 2.8mm or 3.6mm lenses, while outdoors, they chose lenses based on distance. Moreover, different focal length lenses had different imaging effects. Long focal length lenses could see more details of distant objects, but the field of view became smaller and the viewing range became narrower. Wide-angle lenses had a wide viewing range, but it might be difficult to distinguish some details. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Renting a camera lens
There were many ways to rent camera lenses in Dalian. There were some camera equipment rental companies that offered Canon, Nikon, and other brands of cameras and lenses for rent. For example, there were companies that rented Canon 5d3, 5d2, 6d, and other models as well as red circle lenses. The variety was relatively complete and the price was favorable. In addition, some professional photography studios also provided camera lens rental services. These studios had a wide variety of equipment, including single-lens reflex cameras, professional lenses, etc. They would also customize shooting plans for their customers. The scope of services covered Dalian areas. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Professional lens camera
Interchangeable lens cameras were professional in the field of photography. The following are some of the situations regarding professional cameras: The biggest advantage of an interchangable lens camera (including single-lens reflex, mirrorless, rangefinder, etc.) was that it could be used to achieve various shooting needs by changing different lenses. The rich expansibility reflected its professionalism. For example, the Senyang RS af changeable lens set, its national version has been on sale in Jingdong, providing the option of sony e-mount and supporting autofocus, priced at 2899 yuan, it can be manually changed by changing the fixed-focus lens group to switch the focal length, users can freely choose from 21mm F3.5, 28mm f3.5, 32mm F2.8 three modules. Canon's professional cameras, such as the Canon Eos C500, were high-definition cameras, interchangeable lens cameras, and professional positioning cameras. Canon was suitable for Canon's EP lens (including the ES-S lens), Canon's EP Cinema lens (the EP mount), and so on. There were also Djiang's M43 cameras with changeable lenses, such as Djiang's X5 shock-absorbing pan-tilt camera. It was equipped with related accessories such as the 12f2 aperture fixed shaft head and shock-absorbing arm. It had certain characteristics in operation, such as the default manual operation after the rubber wheel was installed. The manual glue turned on the focus assist, and it could focus while moving. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>