How to do the Tyndall effect in the later stages of photography
Here is one way to deal with the Tyndall effect in post-photography: 1. Use the software, Adobe photoshop CC, to import the original image. 2. Open the menu and choose "Color Range", then copy the selected area to a new layer. 3. Open the filter, choose Blur, and then choose "Radial Blur"(note that the range of the selection will deviate from the effect of the blur). 4. If you want to make the light source look softer, you can choose "filter" → "blur" → "Gaussian blur". 5. He pressed down on the current layer and loaded the selection again. Then, he added a curve adjustment layer to highlight the area. 6. Pressing down on the ctrl-alt-e key to imprint the layer, he performed a "Gaussian Blur", then changed the layer stack to "Color Screen", and set the Opacity to 20%. Then, he added a curve adjustment layer to brighten the light source and masked it. 7. Finally, he created a new "curve adjustment layer" and "brightness contrast adjustment layer". He darkened the ground and its surroundings, adjusted the parameters and mask according to his needs, and finally reduced the cyan saturation to make the main body of the picture more prominent. There was another method: 1. He opened the film that needed to produce the Tyndall effect into the PS software. 2. Since the Tyndall effect was mainly in the light receiving area, you could extract the highlight by ctrl-alt-2, and then ctrl-J to copy the highlight from the selection. 3. Layer 1: Filter-Blur-Radial-Blur (set according to your needs). 4. Add a layer mask to Layer 1 and use a black brush to erase the light in the backlit area. Read more exciting novels for free
What is the Tyndall Effect?
The Tyndall effect was not a novel phenomenon, but a phenomenon of light scattering. When a light beam passed through a colloid solution or other high molecular solution, a bright " path " could be observed in the colloid solution or other high molecular solution from a direction vertical to the light. The principle was that light was scattered by suspended 1 - 100mn colloid particles. If the particle is many times larger than the incident light, light reflection occurs; if the particle is smaller than the incident light, light scattering occurs. When the incident light was white, the Tyndall cone of light was often light blue, which was very common in daily life. For example, sunlight entered a dark room through the gap of the window, light shone through the gap of the leaves into the forest, and the light beam shot into the screen during the movie screening to form a light column. It could also be used in teaching experiments to identify the colloid, stage design, traffic warning, and other fields. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to create videos in the later stages of photography
Here are some ways to create a video in the later stages of photography: 1. ** Material preparation ** - He saved the photo material that he wanted to make into a video in his phone. 2. ** Choose editing software ** - For example, editing and other mobile editing software. - After opening the software, he clicked "Start Creation" and imported the photos. 3. ** Add Music ** - You can choose the music suitable for the photo by clicking on the audio-music category below, or you can use the music collected by TikTok. 4. ** Add transition effect ** - There was a small picture with a vertical line between the two pictures. He clicked on it, then clicked on the special effects. He chose the transition effect he liked and applied it to all of them. 5. ** Add Subtitles ** - He clicked on the text below and created a new text to enter the lyrics. - You can choose the style of the subtitles, the words, the entrance animation, and so on, and apply the entrance animation to all the subtitles (may need to be manually adjusted). 6. ** Exported Video ** - After editing it, you can export it. It is recommended to choose a resolution of 1080P or higher and a frame rate of 60. This way, the video will be clearer. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to adjust the aperture smaller in the later stages of photography?
Here are some ways to adjust the aperture: 1. ** Use Manual Mode (M Mode)**: Set the camera to Manual Mode first. Then, use the aperture control dial on the camera to select the desired larger f-stop value (the aperture becomes smaller). 2. ** Aperture priority mode (A or Av mode)**: In this mode, the aperture size can be manually selected. The camera automatically adjusted the shutter speed to achieve the correct exposure. By setting the aperture value to a larger value in this mode, the aperture could be adjusted to a smaller value. 3. ** Use the aperture ring on the lens (if the lens is equipped)**: Some lenses are equipped with an aperture ring. When using it, make sure that the camera is in the appropriate mode (such as manual or aperture priority mode), then adjust the aperture ring directly on the lens to increase the aperture value (decrease the aperture). 4. ** Understanding camera operation **: Different cameras and lenses may have different aperture adjustment methods. He needed to understand the operation manual of his camera and be familiar with the position of the aperture setting and how to use it. Generally speaking, the aperture control wheel is usually located at the top or back of the camera. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to add light and shadow effects in the later stages of photography?
Here are some ways to add light and shadow effects in the post-production stage: - ** Using Layer and Brush Tools **: - Create a new blank layer. - Choose the brush tool and adjust the Opacity to 30 - 50%. - Long press the keyboard's ALT key, then click the mouse on the shadow of the photo to absorb the color, and then use the brush to draw the shadow to see the effect. If you don't like the drawing effect, you can use the eraser tool to erase the areas you don't like or adjust the shadow pattern drawn. - ** Make local adjustments through masks **, such as increasing the contrast and clarity of the snowy mountains, dimming the background and softening it, dimming the sky, etc. - ** Light and Shadow Shaping for Portrait Retouching **: - Create a blank layer, choose Soft Light Mode, and set the brush to Soft Edge and Hardness to 0. - To determine the bright side of the portrait (such as determining through the observation group that the highlight area of the nose and chin is the bright side, and the other areas are the dark side), to solve the problem of facial lines, such as using a white brush that guides the downward line of the law lines and the corners of the mouth, to solve the problem of tear grooves and dark circles with a blackening pen, and to adjust the transition of the cheekbones and cheekbones to make the transition between light and dark soft. - ** Creating a special lighting effect (such as simulating the lighting of windows)**: - After the photo was imported, a new blank layer was created. - Choose the Rectangle Tool and draw a rectangular shape. - He clicked on the color level in the lower right corner and pushed the values in the middle and right of the color level to the right to make the rectangular light up to form a lighting effect. Then, he pressed the keyboard 'ctrl'+' T 'to adjust the size and direction of the light and shadow to the appropriate position, and then pressed' enter 'to confirm. - ** Other operations in PS **: - Make the background a matte texture, press the Alt + Delete key to fill in the color, and then create a new layer. - He changed the blending mode to [Overlay], changed the background color to white, and filled it with colors again. Then, he chose [Color]-[Color] and other operations. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How can I clear up the thoughts in the later stages of photography?
In order to clarify the thoughts of the post-photography, you can start from the following aspects: ** 1. Clear the main color of the screen (set the color)** 1. Colors and emotions are related - Different colors would bring different visual feelings and emotions. For example, the blue color in the picture was mostly cool, and the orange color was mostly warm. The emotions brought by the cold and warm colors were completely different. The green color had a refreshing feeling, and the dark green could create a terrifying atmosphere. Therefore, the main color of the picture had to be determined according to the emotion that he wanted to express. 2. The effect on the whole picture - The main color was the color that set the tone. When post-processing, determining the main color first would help to grasp the overall style. ** 2. Deal with the relationship between the main color and the auxiliary color ** 1. Light and shade and color contrast - There must be a contrast between the main color and the auxiliary color. This kind of contrast could make the picture more three-dimensional. For example, in a cold dusk scene with blue as the main color, the orange-red wooden house and lights formed a contrast with the blue environment, relieving the coldness and bringing warmth. This color and contrast of light and shade would cause the visual fluctuations and make the scene more full. Even if they were of the same color or similar colors, they had to make a contrast between light and dark. 2. Shaping the layers of the picture - By adjusting the relationship between the main and auxiliary colors, the audience's attention could be directed to the parts that they wanted to highlight, thereby improving the visual effect of the picture. ** 3. Decide on a suitable post-production style for the photo ** 1. avoid blindly applying filter - Although there were many styles of filter in the phone APP, not all of them were suitable for every photo. Some photos didn't look good after all the filtering because the style didn't match. For photography enthusiasts, it was not recommended to get used to wearing a filter. Instead, they had to adjust the color and other parameters themselves to enhance their understanding of color. 2. Analysis of the original film and adjustment - Before the color adjustment, the color and brightness of the original film should be analyzed first, and then post-processing should be carried out according to the situation. This way, the effect would not only be natural, but it could also quickly achieve the desired effect. ** 4. Considering the relationship between the part and the whole ** 1. overall tone adjustment - For example, when dealing with photos with shadows, if you want to highlight the focus of interest in the picture (such as people), you can first make basic adjustments to the tone of the picture in the bright part, such as dimming the shadows and black parts, and appropriately reducing the exposure. However, one had to be careful not to over-darken the shadows, or else the middle gray would be darkened, reducing the details of the picture and making it look "dirty." 2. Local details adjustment - On the basis of the overall adjustment, he made some adjustments. For example, the Mask function could be used in Camera Raw (in the old version, tools such as brushes, mirrors, and filter could be used) to process parts. When using the brush tool, you should pay attention to controlling the feather value, adjust the brush size according to your needs, and carefully smear the parts that need to be adjusted such as shadows. You can also use the add and subtract function to adjust the mask range to achieve the desired local effect. ** 5. Originality and purpose-oriented ** 1. The combination of early and late stages - In the early stages, he relied on his skills, and in the later stages, he relied on his creativity. The photos taken in the early stage provided material for the later stage, and the post-processing was to realize the unfinished creativity in the early stage or to further improve the effect of the photos. 2. Make clear the purpose of the future - The purpose of post-production should be clear, such as to highlight a certain element, create a certain atmosphere, or correct the shortcomings in the shooting. For example, to make the person in the photo more prominent, one could adjust the tone and color of the picture. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The blurred effect of photography
If you want to create a blurry light and shadow effect in photography, you can do it through photoshop. The specific method is as follows: 1. Under the filter column, he found Blur-Dynamic Blur and set the blur angle and distance. The angle was usually set according to the direction of the light and shadow. The angle was the same as the direction the light and shadow were facing. The distance was equivalent to the depth of the blur. The greater the value, the more obvious the blur effect. 2. If the effect was too strong, he only needed to lower the layer's Opacity. 3. He covered a white mask and used a black brush tool to wipe out the character. Then, he lowered the Opacity of the brush to about 25% and wiped the ground (generally, the closer to the front the ground needs to be wiped out more; the further back the ground can be wiped out). This would create the effect of the wind blowing through the forest. Of course, some light and shadow blurring effects could also be obtained by patiently waiting in the early stages of filming. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Extreme sports photography effect
Extreme sports photography had many features. In terms of visual impact, extreme sports were full of excitement and adventure, such as wingsuit flight, parachuting, stunt flying, etc. The pictures taken by photographers could often capture the thrilling moments of athletes in high-speed sports, high altitude, or special environments. For example, when shooting parachuting, they could capture athletes rolling, spinning, turning, etc. in the air, which would bring a strong visual shock to the audience. In terms of artistic expression, extreme sports photography could show the unique beauty of extreme sports. For example, in the Red Bull Extreme Sports photography competition, some photos were taken under the waves, and some were taken on the side of the cliff. Through the photographer's unique composition and use of light and shadow, the sense of power, speed, and the beauty of the fusion between man and nature could be demonstrated. From an emotional point of view, extreme sports photography could convey the challenging spirit of athletes and the focus and enthusiasm of photographers. For example, in the Arctic trekking shoot, the photographer recorded the persistence of the hikers in extreme environments. These works contained thoughts about life and could also make the audience feel the challenging spirit, making people exclaim and express respect at the same time. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Central axis photography effect
Central axis photography could produce a variety of effects. For example, the works in the "Excellent Photographic Works Exhibition of the 2021 Beijing Central Axis Cultural Heritage Inheritance and Creation Competition" showed the beautiful style of the central axis historical buildings from different angles. Some works enlarged 85% of the works to a huge scale of 3.5 meters by 3.5 meters, showing the magnificent magnificence of the central axis ancient buildings, such as the Meridian Gate plated with "golden body" under the sunlight, the Taihe Hall Square after the rain, the Temple of Heaven covered with snow and other magnificent buildings. There were also works that could make people feel the warmth of the central axis, such as the quiet and peaceful Wanning Bridge under the setting sun, the children skipping rope in the bell tower square in the morning light, the youth playing roller skating, and the grandfather and grandson playing chess, etc. A time-lapse video consisting of more than 5000 photos taken by photography blogger Ma Tao in 16 hours showed the magnificent effect of the central axis buildings after the sun turned into the night. When the Yongding Gate, drum tower, and bell tower were lit up, they were accompanied by the surging sunset and the sea of clouds at sunrise. From Yongding Gate to the north, you could see the front door, the Great Hall of the People, the National Museum, Tianamen, the Forbidden City, Jingshan Wanchun Pavilion, and other buildings. Further north, you could also see the towering Olympic Tower. The undulating mountains outside the North Sixth Ring Road and the sky gradually darkened as the sea of clouds flowed. The central axis buildings that were lit up presented a completely different scenery from the daytime. Every frame of change brought a different urban charm. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to play in the later stages of Hegemony
In the later stages of Hegemony, it was recommended for the commoner players to use the lineup of the main general Guan Yu and the deputy general Zhang Fei. Guan Yu was the first general in the game to have a biography. It was not difficult to obtain it, and the actual combat effect was also very good. Zhang Fei was a Red General that was relatively easy to obtain. His Musou skill dealt very high damage and was very suitable to be used as a deputy general. This lineup could achieve very good results in the later stages. In addition, according to the player's preferences and situation, they could choose a suitable lineup and arrange the troops reasonably to obtain an advantage.
Was Thriller Paradise good in the later stages?
There were different opinions on whether Thriller Paradise would be good in the later stages. Some comments felt that the later part of the story was weak and dragged, and some even thought that it was a bad ending. Some comments thought that the later part of the story had improved, and the freshness and setting of the early part had left a deep impression on people. Therefore, it was impossible to draw a clear conclusion.