The Craftsmanship of Curtain Wave
The following is a kind of curtain wave craft method: 1. First of all, we must consider the color and pattern of the curtain cloth. The color of the fabric should be coordinated with the living room. It is best to determine the style of the living room. At the same time, we must consider whether the color of the curtains, walls, furniture, and floors is harmonious. 2. He folded the upper edge of the curtain cloth by 1 cm and sewed it to fix it; the lower, left, and right sides of the curtain cloth were folded by 1 cm, and then folded by 1 cm and sewed. 3. He used a tailor's pen to mark the top of the curtain and made a curtain fold at the marked position. He made a total of four folds and fixed them with a bead needle before sewing them together. 4. He folded the strap in half and sewed it at the curtain's fold. The ends of the strap were tied into a beautiful bow on the front of the curtain. Another method was as follows: 1. The pleating belt was pleated in advance to the width of the curtain after completion, leaving an unpleated part at both ends of the pleating belt, one end of which was used for overlapping, and the other end was used for the turning of the curtain rod. 2. Hang the pleating belt on the installed horizontal bar, adjust the position of the pleats as necessary, fold both ends 1.3 cm inward, remove the pleating hook, and cut out various curtains based on the pleating belt. 3. The lower edge and the two sides of the curtain were folded inwards and sewed; a mark was made on the front side of the curtain 1.3 cm away from the upper edge, and the pocket was facing upwards. The upper edge of the pleating belt was pinned along the curtain marking line with a pin, so that the pleating belt overlapped with the curtain by 1.3 cm, and the edge of the pleating belt was sewed 6 mm away. 4. Fold the pleating tape inside the drapery so that it is aligned with the upper edge of the finished drapery and iron it flat. If it is marked, sew the lower edge and both sides of the pleating tape according to the instructions on the pleating tape. 5. insert the pleating hooks completely into the folds and adjust the folds between the pleating hooks. While waiting for the TV series, he could also read the exciting content related to this site!
The whole process of making the water wave curtain head
To make the wavy curtain head, the first thing to do was to cut and cuff the edges, that is, to cut the flat curtain, the wavy curtain, the flag, and the waist according to the required size, and to cuff the cut edges; Then, install the lace on the wavy curtain and the flag, and at the same time, use the rope cloth to make a pattern on the flat curtain; Finally, assemble the flat curtain, the wavy curtain, the flag, and the waist, and install the lace on the waist, so that the wavy curtain head was completed. While waiting for the TV series, he could also read the exciting content related to this site!
Immortal Craftsmanship
Immortal Craftsmanship referred to the classical craftsmanship furniture made by the capital of Chinese classical craftsmanship furniture, Xianyou. It was a clever fusion of traditional Chinese painting art, carving art and furniture making skills, continuing and innovative the classic style of Ming and Qing furniture. The main characteristics of the ancient craft furniture were elegant style, rigorous structure, and exquisite materials. Xianyou County had more than 3000 craft enterprises and more than 70000 employees, forming a cluster of a certain scale. Immortal craftsmanship furniture had a unique local style and occupied an important position in Chinese wood carving furniture. It was known as one of the four major schools of Chinese classical furniture in the Ming and Qing Dynasties. It was one of the important schools of Chinese classical craft furniture and was also a national intangible cultural heritage. It was listed in the National Traditional Crafts Promotion List. With its exquisite craftsmanship and unique artistic style, the immortal craftsmanship furniture displayed the beauty of Chinese culture and became the story of the Chinese themselves.
Heavenly Craftsmanship
The first chapter of Heavenly Creations mainly discussed the importance of agriculture and handicraft production. The author, Song Yingxing, believed that agriculture was the foundation of national stability, and it was crucial to solve the problem of food for the common people. He hoped to change people's living conditions through the development of agricultural technology, so that they could eat and wear warm clothes. This chapter also mentioned the legends related to Shennong and the ancient emperors. Tian Gong Kai Wu was the world's first encyclopedia on agriculture and handicraft production, and it had an important impact on the world.
Heavenly Craftsmanship
The craftsmanship in Heavenly Craftsmanship covered many aspects: 1. ** Agricultural Craftsmanship ** - ** Crops planting **: Including the planting of rice, wheat, millet, millet, hemp, beans and other crops, irrigation, the use of farm tools, and disaster treatment. - ** Grain grinding **: It involves the peeling, water grinding, storage of wheat and rice, as well as the grinding methods of millet, hemp, beans, etc. 2. ** Spinning and Clothing Craftsmanship ** - ** Clothing production **: From the acquisition of silk, types, taboos to the method of making ready-made clothes, such as dragon robes, cotton clothes, hemp clothes, mink fur, brown felt, etc. - ** Clothes Dyeing **: Including the production methods of red, brown, gold, green, cyan, red, blue, and other colors. 3. ** Food processing technology ** - ** Salt production **: It introduced the origin of salt, as well as the extraction methods of sea salt, pond salt, well salt, etc. - ** Sugar-making **: It recorded the types of sugar cane, planting methods, extraction methods of sugar cane, as well as the introduction and extraction methods of honey. - ** Wine Brewing **: From the selection of rice to the entire process of yeast fermentation. 4. [Porcelain Craftsmanship]: It talks about the production methods of bricks, urns, and white porcelain. 5. ** Metalwork Craftsmanship ** - ** Casting Craftsmanship **: Including the production of cauldrons, bells, cauldrons, Buddha statues, cannons, bronze mirrors, copper coins, iron coins, etc. - [Forging Technique: Such as smelting iron, smelting copper, making axes, hoes, saws, planes, chisels, anchors, needles, etc.] - [Metal Obtaining: Description of the methods of obtaining the main metals of the time, such as gold, silver, cinnabar, copper, lead, iron, and tin.] 6. ** Boat and Boat Crafting **: Including the manufacturing methods of boats, pleasure boats, sea boats, miscellaneous boats, carriages, etc. 7. ** Ore processing technology **: For example, the production of lime, the acquisition of coal, the extraction of Alum, the extraction of sulfur, etc. 8. ** Oils and Fats Obtaining Technique **: Including obtaining vegetable oil and animal oil. 9. ** Paper making process **: From the selection of paper material to the steps of cooking. 10. [Weapon Craftsmanship: Including the production of bows, crossbows, weapons, firearms, three-eyed systems, cannons, etc.] 11. ** Ink production process **: For example, the production of cinnabar, vermilion, ink, etc. 12. [Jewel Crafting]: It talked about the acquisition and production of pearls, gems, jade, and other jewelry. If you want to know more about the follow-up, click on the link and read it!
A novel of craftsmanship
I recommend Craftsman's Craftsmanship, a novel about urban life written by Scholar Ya Wan. It was a story about the inheritance of craftsmanship. The protagonist could touch the craftsmanship of the artifact. The recommendation index was three and a half stars. This book was full of practical information. The craftsman was very professional, but some chapters would make the reader bored. Occasionally, he would use too much strength, but it was not awkward. It was a pity that the later parts were like the encyclopedia, and the plot was fast. The main character got used to it too quickly. It was just a show of the craftsman's sincerity and could broaden his horizons. " Drawing the Heavens: The Beginning of the Extermination of Ghosts " was not bad either. It was a novel about the infinite heavens. After the protagonist Yan Yu was run over by the autobots, he brought the lottery system to travel through the two-dimensional plane and showed off his skills in various worlds. There were wonderful stories in worlds such as the Ghost Blade and the Incantation Battle. " Longevity Begins From Uncle Nine's World " was a novel written by You. Qin Dazhi crossed the heavens and witnessed the rise of the human race to the peak of chaos. 'Extraordinary Craftsman' was an urban supernatural novel written by Old Fruit Tree. Lu Ming used the extraordinary craftsman system to experience the world of craftsmanship. Although it was just a seedling, it was quite interesting. The other side of the coin," From King Zhou Shooting the Sky to the Rise of Civilization," was a fictional historical novel. King Zhou of Shang had been reborn, contributing to civilization and reincarnating continuously. He had done shocking things in every historical period. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Craftsmanship of spaceship
Here are a few ways to craft a spaceship: - Paper plate spaceship pendant production: First cut the paper pattern and prepare the glue and other tools (you can also buy ready-made material bags), stick the rainbow and clouds on the spaceship body, add the red heart decoration, the spaceship window, the spaceship wings, and then stick the spaceship window again. Punch a hole and thread a rope to make a decorative pendant and put on the lanyard. - Using Sprite bottles: wrap the Sprite bottle with paper, wrap it with a blue ribbon, fold the paper into a cylinder, stick the big and four small cylinder together, wrap the paper bucket with paper, wrap the blue ribbon on both ends and draw a logo with a red pen. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Heavenly Craftsmanship (1)(5)
The fifth chapter of the first volume of " Heavenly Craftsmanship " was " Saltiness Making." It mainly described the method of making salt, including the introduction of the salt production area, as well as the extraction methods of sea salt, pond salt, well salt, and so on. If you want to know more about the follow-up, click on the link and read it!
Jadeware Craftsmanship
There were many forms of jade decoration. From the perspective of the production process, it could be divided into round carving, embossed, openwork, etc. These different carving processes brought different decorative effects to the jade. Round carving was a three-dimensional carving of jade. The work could be viewed from many sides, such as Yushanzi. The embossed was carved on the surface of the jade. According to the thickness and method of carving, it could be divided into high embossed, medium embossed, and low embossed. The embossed jade works were mainly viewed from the front, and most jade ornaments belonged to this category. Open carving was also known as hollowed-out jade. On the basis of round carving or embossed, the background part was hollowed out, making the work look exquisite and transparent, like flower works, hollowed-out works, etc. There were also some special crafts used for jade ornaments. Thin jade ware required appropriate materials, exquisite processing, uniform thickness, dignified and unique shape, suitable decoration, exquisite and transparent finished products; Internal painting jade ware was to draw patterns on the inner wall of crystal, agate and other utensils with good clarity, so that the appearance was unique; Engraving jade ware was to carve poems, inscriptions, year numbers and auspicious words on the finished jade ware. The poems could often be combined with the decorative patterns of the jade ware to show the characteristics of traditional China poetry, calligraphy and painting. Gold inlaid jade ware used jade as the main body and inlaid with gold and silver thread (also known as gold and silver inlaid, gold inlaid with gold thread, etc.). The gold thread in the gold inlaid jade ware was used as decoration, which could be seen as a replacement for the decorative patterns of the jade ware itself, and it reflected each other. The surface of the jade would also be carved with decorative patterns, such as jade axes, jade shovels, and jade congs. The beast-faced jade Cong unearthed from the Liangzhu cultural site in Wujin, Jiangsu Province, had a width of 0.1 to 0.2 millimeters. The lines were straight and straight, and the shape of the object was strictly symmetrical. This showed a very high level of jade carving technology. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Zhao Lusi's Pearl Curtain Jade Screen First Wave of Public Reputation
The audience's praise for the premiere of "Pearl Curtain Jade Screen" had already been released, and the show was ridiculed by the masses. In terms of the appearance of the actors, the male lead, Liu Yuning, and the second male lead, Tang Xiaotian, caused controversy and were ridiculed by the audience. Liu Yuning was the male lead for the first time, and his appearance became the focus of the audience's complaints. Even if the official poster was edited, it still could not cover up the facial defects. Although Tang Xiaotian's facial features were exquisite, his skin was loose, and his overall appearance was difficult to impress. Zhao Lusi was also ridiculed by some netizens. Some netizens said that " ugly people are forbidden to act as ancient puppets ", while others criticized her and Liu Yuning for " gathering ugly people." Moreover, some viewers felt that Zhao Lusi had entered a routine performance mode. No matter what she acted, she would have the temperament of a gangster, so they did not approve of her acting skills. There were also many problems with the plot. The female protagonist's style did not conform to the character setting. In the story of the pearl picking slave's counterattack, the female protagonist should be sunbathing at the seaside for a long time on Dragon Boat Festival, but her skin was always fair in the play. The plot of the female protagonist selling beads was illogical, and she successfully sold the beads at a higher price after only one dance. The relationship between the male lead and the female protagonist progressed too quickly. He fell in love with the female protagonist after only one meeting. It was too abrupt and illogical. In addition, under the banner of the female protagonist, she was disguised as a Mary Sue. The key point was to rely on men to save themselves. However, the underwater scenes were one of the highlights of the show. The crew used real-life filming and there were no green screens to play with. Zhao Lusi's performance in the underwater scenes was outstanding. Her expressions and movements were natural and smooth. Her beauty in this drama was also praised by the audience to the peak. At the same time, the director's skill was shown. The plot was compact and the story logic was clear. It would not be long and tedious. Overall, the drama's flaws didn't obscure its merits, but the premiere had a bad reputation. Had he not watched enough of Long Lovesickness 2? Hurry up and read the original work of " Everlasting Lovesickness 2: A Vow of Love "!
Bamboo Man Craftsmanship
Bamboo Man crafting required the preparation of bamboo, wooden sticks, iron wires, hemp ropes, and other materials. First, he had to choose a bamboo with a diameter of about 2 centimeters, cut the bamboo into small pieces about 10 centimeters long with a knife, and then use a hammer to loosen the bamboo joints. Next, he had to prepare a wooden stick with a diameter of about 1 cm. He would use a saw to saw the wooden stick into small pieces about 30 cm long, which would be used as the skeleton of the bamboo people. Iron wires and hemp ropes were used to fix and connect bamboo joints and wooden sticks. The production steps included making the head, arms, legs, and clothes. The specific steps were to cut a section of bamboo into the shape of the head and connect the head and the body with iron wire; cut two sections of bamboo into the shape of the arm and connect the arm and the body with iron wire; cut two sections of bamboo into the shape of the leg and connect the leg and the body with iron wire; and finally wrap the body of the bamboo man with hemp rope to make the shape of clothes.