The method of using force to serve a table tennis backhand is as follows: * * 1. Basic sequence of exertion ** 1. * * Waist and hip drive ** - When you serve, you should use the waist and hip rotation, from the left back down to drive the arm or elbow horizontally (from left to right), and the wrist should be in a relaxed state. Don't just rely on your wrist to hit and rub. Many people have this habit, which leads to the serve not turning. - When the waist and hip rotate from the back left to the front right, the arm should follow the force to the front right. For example, when preparing to serve, the elbow joint was used as the pivot point. The elbow joint followed the body to drive the arm to the left and then the back, and then the force was applied along with the rotation of the waist and hip. 2. * * Arms follow ** - The movement of the arm must follow the rotation of the body. When learning how to serve the backhand, first let the elbow joint support in front of you. The elbow joint can not move first, but it can rotate with the body. The wrist should not move first. Hold the racket well and feel the arm move with the waist and hip rotation. - Gradually relax your arms, your forearms, and when you serve, draw them in a little. Then, move them down and follow your waist. When the arm rotated, the forearm was slightly retracted into the body. Then, when the waist rotated, the forearm naturally followed the waist forward and downward. 3. * * Wrist coordination ** - When the forearm exerted force, the wrist followed the forearm to exert force. The strength of the wrist was brought out by the forearm. For example, just like throwing cards, if the forearm did not exert force and only the wrist moved, the card would not have any strength when thrown. - When serving, the grip of the racket could not be too rigid or too stiff. Otherwise, the wrist would be stiff and it would be difficult for the ball to rotate. The grip should be relaxed so that the wrist could be better driven by the forearm. It was like turning a straight stick (when the grip was stiff) into a whip (when the grip was relaxed). The whip head (the racket and the wrist) could be thrown out and quickly rub against the ball. * * 2. The characteristics of different spinning serves ** 1. * * Side topspin serve (rubbing method)** - Instead of pushing the ball forward, he had to use his wrist and arm strength to rub the ball upward. - The racket had to be slightly tilted, with a certain inclination to rub the lower right side of the ball, and the racket had to be brought up from the bottom to the top, so that it could have a strong topspin. The entire movement of the arm lifting up could be slightly larger, and the swing had to be fast, and the arm was quickly lifted up. When you serve this kind of ball, you have to feel that the ball is sucked up and brought up, brought up to the upper right front, and rubbed up, so that the ball will be rubbed thinner. 2. * * Side backspin serve ** - The moment the ball touched the racket, it would rub down. - When the backspin was used, the surface of the racket would stand up more. Then, the moment the ball touched the racket, the surface of the racket would be slightly flat to rub the bottom of the ball. The position near the bottom would then be rubbed out. When the side backspin ball touched the ball, the surface of the racket became flatter, and the friction between the front and bottom was better. * * 3. The key points of using force when making different rotations in the same movement (Take side spin and side spin as an example)** 1. * * Lead Auction ** - Try to move as uniformly as possible. 2. * * Point of contact ** - When serving with a side spin, the ball's contact point on the racket is relatively low; when serving with a side spin, the ball's contact point on the racket is relatively high. 3. * * Rubbing ** - When the side spin ball touched the ball, it instantly rubbed downward to the right, and the side spin ball rubbed horizontally to the right. 4. * * Patting ** - When the side spin ball touches the ball, the racket face becomes flatter instantly; when the side spin ball touches the ball, the racket face becomes more upright instantly. After touching the ball, there is a movement of flattening the racket face, which makes the serve more like a side spin serve, maintaining the confusion of the serve and the consistent movement. 5. * * Practice Sequence ** - During practice, he would start with a side spin and rub the ball sideways, and then practice the same action of a side spin ball, but the point of contact would be lower than the side spin ball. 6. * * Adjusting Method (High-level Athlete)** - For high-level athletes, they first used their index finger and thumb to adjust the angle of the racket face at the moment of serving, and when rubbing the ball, they used the direction of the wrist force to create different rotations. Read more exciting novels for free
The following is the table tennis grip related to the situation: - ** Standard Shake-hand Grip Method **: The racket is held between the thumb and index finger of the hand. The thumb, middle finger, ring finger, and pinky naturally hold the racket handle, and the index finger naturally straightens and diagonally sticks to the rubber on the back of the racket at 45°. When the grip was deep, the tiger's mouth was close to the shoulder; when the grip was shallow, the tiger's mouth was slightly close to the shoulder. - Deep Grip: The best way to hold the racket is to straighten your right hand, place your index finger and thumb horizontally, and place the racket between your index finger and thumb with your left hand. Let the tiger's mouth press against the shoulder of the racket, and the rest of the fingers will naturally hold it tightly. The position of the index finger and thumb can be adjusted according to one's own habits. If the index finger is close to the shoulder, it is beneficial for the backhand, and if it is far away from the shoulder, it is beneficial for the press. - Shallow Grip Method: When holding the racket in a shallow grip, the middle finger, ring finger, and little finger naturally hold the racket handle. The thumb is on the front of the racket and lightly sticks to the middle finger. The index finger is naturally straightened and placed diagonally on the back of the racket. The thumb and index finger are slightly attached to the racket. The position of the web between the thumb and index finger of the shoulder pat should be adjusted according to the use of the forehand and backhand. The position of the web between the thumb and index finger should be tilted to the thumb when the forehand is used, and the index finger should be tilted to the backhand. - ** Forehand serve grip method **: Use your thumb and index finger to hold the racket, and then release the racket handle with your middle finger, ring finger, and pinky finger. These grip methods help to play a role in different hitting situations. For example, the deep grip method can better control the shape of the racket, the shallow grip method is more flexible, and the serve grip method can fully utilize the flexibility of the wrist to create rotation and force. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The first training method of backhand pull in table tennis was backhand block. Backhand push block was the foundation of backhand technique. It was mainly to experience the force of straight forward and backward. At this stage, remember not to add friction. Through backhand push block, it could help the player find the rhythm of backhand hitting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following are some common movements of the backhand technique in table tennis: 1. [Backhand Thrust: This is the basic skill of the backhand style.] During the systematic practice, you must pay attention to the starting point and high point of the opponent's return ball. It was fast and could quickly poke the opponent's diagonally, straight line, and two big corners in the game, creating opportunities for the next attack. 2. Backhand Pick: An older technique, suitable for the backspin ball that doesn't spin too much. You need to judge the rotation of the ball. It can be used with a short swing to attract the opponent to the near stage and create an opportunity for yourself to attack. 3. [Backhand short swing]: The return of the ball should be short. Try not to give the opponent a chance to attack. You must catch the ball when the return ball just bounced up and learn to borrow the opponent's strength to return the ball. It is often used in conjunction with picking and pulling. 4. [Backhand Pulling Rush]: This is the main attack method of the backhand. The main points of the movement are divided into four steps: lead, turn, head, and spread. It requires the cooperation of the entire body. 5. Backhand defense loop drive (for adult practice): The position of the forearm should be higher, and it can be used to receive the loop drive at the highest point. 6. Pulling Backspin (Laterhand Backhand): Slow dribble is the key. At the beginning, you have to find the drop point of the ball and dribble towards the navel or slightly to the left. You have to find the feeling of kicking your legs and hitting your hips in one go. 7. ** Backhand Quick Arching **: The basic requirement is that the position of the racquet should be lower than the fast play. The shape of the board should be bright and slightly forward. When hitting the ball, the wrist, arm, and fingers must exert force together. 8. ** Mid-stage pull (horizontal board backhand)**: Stand about one meter away from the stage, with your feet parallel or slightly forward with your left foot; lead the racket to the left side of your abdomen; press the board; support with your elbows outwards. At the beginning, when you hit the ball in the early stage of the descent, you should have the feeling of facing forward first when you swing. Your wrist, the inner side of your thumb, and your three or four fingers should work together. It is recommended to practice slashing first. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
There were several types of backhand table tennis skills: - [Backhand Thrust: This is the basic skill of the backhand style.] When practicing systematically, pay attention to the starting point and high point of the opponent's return. The starting point was to practice the feeling of the ball, the combination of hitting and friction, and the speed of the forearm swing, while the high point was to practice the backhand force to lay the foundation for the backhand burst. Some fans were easy to drop the ball into the net because they did not open their wrists in time when their forearms were holding the ball, resulting in the lack of an arc. - [Backhand Quick Tear]: This was an advanced technique based on the ball toss. The angle of the racket needs to be parallel to the table (180°), which is different from the pitch (45°). During practice, the sparring partner should feed the ball with an additional loop. The trainee could not retreat from the platform. The plate type should be pressed forward and rubbed. Moreover, the player must have a solid foundation of the ball. The moment the ball touched the wrist, the wrist should instantly accelerate the friction. Otherwise, it was easy to make mistakes or fall into the net. - [Backhand Strike]: It was an old technique that was commonly used in the past. It was very important to take the lead position during practice. The head of the racket should be slightly downward because the main way to hit the ball was to rub the wrist, which would leave better room for stretching. Also pay attention to the proportion of picking and hitting. When the incoming ball is high and does not turn, hit more than picking; when the incoming ball is low and relatively backspin, the proportion of picking is more than hitting; when picking diagonally, hit more, when picking straight line (because the path is short), pick more, and add more friction and arc to increase the probability of coming to the stage. - [Backhand short swing]: The return of the ball should be short to avoid giving the opponent a chance to attack. It is often used in conjunction with the pick and twist. There were two kinds of swing: "support swing" and "quick swing". The "support swing" was the level of the racket face, which was used to support the net with the force of the ball. It was suitable for the special rotation of the backspin ball. The "quick swing" was to adjust the racket face according to the rotation of the ball, and use the wrist to chop down. Like a chicken eating rice, the wrist felt shaking. - [Backhand Pulling Rush]: This is the main attack method of the backhand. It requires the cooperation of the entire body. The main points of the movement are: lead, turn, head, and spread. - ** Backhand Pushing Block **: It's easier to master than the backhand drive. It focuses on the forward and backward force, mainly to experience the impact feeling. For the upspin ball near the table, the timing of the shot is the rising period. - ** Backhand Bounce **: It can be understood as an "enlarged version" of the backhand push block. The key point is to add the shaking force of the wrist. It is mainly aimed at the no-spin ball or topspin ball near the net. The timing of the shot is at the high point. - Backhand Pick: Mainly targeted at weak backspin near the net. It can replace twisting and pulling. It is sudden and can also be used with feints to pick two lines. - Backhand Backspin: Mainly experience borrowing strength, hitting the ball in front of you and during the rising phase, and adding friction to make the ball produce an upward arc over the net. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The backhand table tennis movement included many techniques: 1. Backhand "Pushing" the ball: This was the most basic technique of backhand play, the foundation of all backhand techniques. "Poke" the ball at the starting point and high point of the opponent's return. When he pulled the racket, his wrist naturally drooped and the plate shape lit up. His forearm waved to the front right, his wrist had a shallow movement, and his waist turned from left to right. 2. ** Backhand Quick Tear **: An advanced technique based on the "Pushing the Ball". The action essentials were different from the "Poke". The angle of the racket in the "Poke" could be 45°, but the angle of the racket in the "Quick Tear" had to be parallel to the table (180°). 3. [Backhand "Picking Hit": It's an old technique that was used more often during Wang Liqin's era.] It can be used in conjunction with a short stance to attract the opponent to the stage and create an opportunity for oneself to attack. The rotation of the ball must be judged when using it, and it is only suitable for the ball that does not spin too much. 4. Backhand "Short Throw": The return of the ball should be short. Try not to give the opponent a chance to attack. It is often used in conjunction with "Picking Hit" and "Twist Pull". The key point of the technique was to catch the ball just as it bounced back and borrow the opponent's strength to return the ball. 5. Backhand Pulling and Rushing: It was the main attacking method of the backhand in table tennis. The movements were divided into four steps: lead, turn, head, and exhibition. The racquet should be lower than the ball, and it is better to lead it to the abdomen. When the racquet is led, the center of gravity is lowered. The moment the ball is touched, the right foot will step on the ground and the center of gravity will be lifted. The forearm will be swung to the right front with the elbow as the axis. The rotation of the wrist will be more obvious. 6. Backhand flick/knock: Backhand flick is similar to backhand knock. It is a move where the wrist drives the forearm to hit the ball in the middle and late stages of the ball's rise. It is mostly used to deal with high-hanging arcs or half-high balls that don't spin much. It is an oppressive defensive move. 7. Backhand Plunge: It was a technique commonly used by shake-hand players. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
In a table tennis match, a backhand and a forehand attack was a common and exciting scene. Many athletes had this ability. For example, in the quarterfinals of the men's singles at the 2020 Qatar open, there were many backhand and backhand attacks between " Big Fatty " Liang Jingkun and " Big Head " Wang Chuqin. Different athletes had their own characteristics in the backhand and backhand attacks. Some athletes might have stronger forehands and use their strength and speed to score points, while some athletes had outstanding backhand skills and could compete with their opponents 'forehands. Backhand and forehand attacks also involved some tactical use. For example, in the match between Wang Liqin and Chen Wei, Wang Liqin used the counter-attack tactic to attack the opponent's weak backhand. In addition, the serve was also related to the backhand and the forehand. For a player with a strong backhand, if he used a normal side serve, it would be difficult to play the backhand advantage when the opponent received the serve and had a high probability of receiving the forehand position. The reverse side spin serve was one of the best serving sets that could fully play the strong backhand attack. Fan Zhendong and Zhang Jike were good at using the reverse side spin serve to organize two-sided attack tactics. When the opponent received the serve, they could use a high-quality backhand straight line to attack the opponent's empty forehand. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
In table tennis, the backhand and backhand leg forces are different. For the forehands, they needed extra strength from their legs when pulling the ball. Specifically, when preparing, the center of gravity was pressed down, and then the legs were pushed up and moved forward and upward. During this process, the force of the legs was the starting part of the power transmission. The power was transmitted from the legs to the waist and abdomen, then to the arms, forearms, and wrists, providing sufficient power for the shot. However, in a conventional forward and backhand attack, if the base was stable enough, the legs could provide enough support, and there was no need to add force to the legs. This was because the force from the legs and feet would be transmitted to other parts. On the one hand, there was not enough time, and on the other hand, the attacker would easily lose balance. In terms of backhand, when preparing to catch the ball with backhand, the left foot could be slightly adjusted to the left foot slightly back in order to draw the racket and accumulate power. Although it was not clearly stated that the leg was exerting force here, this position adjustment created better conditions for subsequent force. Furthermore, the legs could coordinate with the other parts of the body through movements such as kicking the ground. The strength could be transmitted to the arms and other parts of the body to provide strength support for the backhand. However, in the backhand technique, most of the time, the forearm and wrist should be used to exert strength. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
There were many reasons for the pain in the elbow of a table tennis player. In table tennis backhand movements, if there are irregular movements such as pushing out the elbow or stretching out the elbow, it may affect the strength and cause elbow pain. For example, the habit of pushing the elbow (the elbow is pushed out nearly 90 degrees in front of the body to form a fixed axis) and supporting the elbow (the elbow is supported at the side of the body like the two sides of the crab's body) may cause problems. At the same time,"tennis elbow" may also appear in the backhand stroke of table tennis. This situation is caused by the repeated traction of the elbow tendon. It is more common in tennis, tennis, table tennis and other sports backhand strokes, which will cause forearm muscle pain. In addition, if the amount of exercise during table tennis training was too much, and the physical fitness was not enough to support such an amount of exercise, even if the movements were standard and the force was scientific, it might cause elbow pain, similar to the situation where professional athletes suffered injuries due to the excessive exercise despite the standard movements. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
In table tennis tactics, the backhand technique had an important way of integration. From the point of view of the service link, if the opponent's attack is strong and the backhand is weak, you can send more backhand backspin short balls to the opponent's small triangle area or the middle side of the forehand to limit the opponent's attack ability and create opportunities for your next board. If the opponent's forehand is weak and the backhand is strong, you can send the backhand backspin long ball to the opponent's big angle or the middle side of the forehand to let the opponent with a weak forehand handle the backspin ball and increase the probability of their mistakes. When the opponent's forehand and backhand attacks are strong, you can use the backhand backspin ball to cooperate, or use the straight line, diagonal line, long and short ball changes to disrupt the opponent's judgment and rhythm to find an attack opportunity. In terms of specific backhand technical movements, like backhand dribbling, the backhand dribble was similar to pushing and blocking. The plate shape was lit up, the forearm swung to the front right, the wrist had a shallow swing movement, and the waist turned from left to right. The backhand dribble dribble was lower than the backhand dribble, and the center of gravity was lowered. The moment the ball touched, the right foot stomped on the ground and the center of gravity was lifted. The forearm swung to the front right with the elbow as the axis, and the rotation of the wrist was more obvious. The backhand bounce was similar to the backhand strike. The wrist moved the forearm and hit the ball in the middle and late stages of the ball's rise. It dealt with high hanging arcs or half-high balls that did not spin much. These backhand techniques could be flexibly integrated into the overall strategy according to the opponent's position, technical characteristics, and the situation on the field. For example, when the opponent returned the ball to the backhand position and the quality was not high, he could use the backhand to hit the ball or bounce the ball to make a quick counterattack; if the opponent was standing far away and was ready to attack with the forehand, he could use the high-quality backhand to pull the ball to disrupt the opponent's rhythm. In addition, the backhand triangle tactic was also crucial. The essentials of a triangle serve included serving the ball with a left-hand spin. If the backhand was strong enough to change into a straight line, he could use more topspin. If the backhand was strong enough to pull the ball and spin down, he could use more backspin. He had to adjust the rotation according to his own offensive strength. When serving, the angle of the racquet face should be aimed at the starting point and the end point. The trajectory of the action should be the same as the side-down and side-up. However, when stopping the action, the direction of the racquet head must be clear. The first jump of the small triangle ball should be in the center line. The ball should deliberately find a position near the middle of the table and not too close. This could improve the accuracy of the serve. In actual combat, it could be based on the opponent's response ability, combined with subsequent offensive means, such as backhand attack, to form an effective tactical combination. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The serving technique of table tennis contained many elements and there were many types of serving. ** I. Common Key Points of Serves ** 1. ** Tossing the ball ** - The ball must be thrown steadily, including the height of the ball and the stability of the ball's rise and fall after throwing it. 2. ** Point of contact ** - The height should be appropriate. The contact point of the long ball should be lower, and the contact point of the short ball should be higher. 3. ** The ball is the first to jump on the table on our side ** - The first jump should be near the end line of the table when serving a long ball, and the middle position when serving a short ball. 4. ** Clapping ** - When holding the racket, the web between the thumb and forefinger should not be too tight to ensure the flexibility of the wrist and fingers. 5. ** Lead Auction ** - The lead, especially the wrist, had to be sufficient. 6. ** Power ** - Arm and wrist forward, downward force must pay attention to skill, to prevent the ball from falling into the net, bouncing too high or out of bounds. 7. ** Rubbing Ball ** - The part of the racket that rubbed the ball and the direction of the force must be accurate. Try to use similar movements to send out different spinning balls. 8. ** Body coordination ** - Focus on the strength of the forearms and wrists, and pay attention to the coordination of the waist to improve the quality of the serve. Take the right hand grip as an example. The center of gravity of the body moves from the right foot to the left foot when serving with the forehand, and the reverse is true when serving with the backhand. After each contact with the ball, the arm should be waved and quickly restored. ** 2. The preparation posture for the serve (Take the right hand as an example)** 1. ** Forehand serve ** - With his left foot slightly forward and his body slightly tilted to the right, he placed the ball in his left palm on the right side of his body. 2. ** Backhand serve ** - His right foot was slightly forward, his body slightly tilted to the left, and his left palm held the ball in front of his body to the left. ** 3. Main types of serve techniques ** 1. ** Forehand flat serve ** - [** Characteristic and Function **: Average speed, slight topspin. This is a basic serving method for beginners. It's easy to practice with a forehand attack or backhand push.] - ** Action essentials **: Throw the ball with your left hand and rotate your right arm inward at the same time. The racket face is slightly tilted forward to the right and back. When the ball drops from the high point to slightly higher than the net, the upper part of the ball will exert force to the left front. - ** Note **: Beginners are prone to not throwing the ball, hitting the ball inside the table, or breaking the rules. 2. ** Backhand flat serve ** - [** Character and Function **: The nature of the serve is similar to a normal serve with a forehand, but the technical movements are quite different. It is the foundation for mastering a high-quality backhand serve.] - ** Action essentials **: Throw the ball with your left hand and rotate your right arm outward at the same time. The racket face is slightly tilted forward to the left and back. When the ball drops from the high point to a little higher than the net, the upper part of the ball will exert force to the right front. - ** Note **: In addition to the common problems of a flat serve with a forearm, it is easy for beginners to cut forward and below to cause a rapid backspin. 3. ** Forehand serve with a right topspin shot (running ball)** - ** Special Effect **: Fast ball speed, long landing point, large angle, strong momentum, low flight arc and slanted to the left, strong topspin on the right, can form a stalemate with specific opponents in the middle and far distance or against opponents who are good at rubbing attacks. - ** Action essentials **: Throw the ball with your left hand and rotate your right arm inward at the same time. The racket face is slightly tilted forward. The forearm wrist naturally hangs down. The elbow joint is higher than the forearm and is pulled to the right. When the ball drops from the high point to the net height, the right side of the ball will rub to the right side. The moment the ball is touched, the thumb will press down and the wrist will shake from the right back to the left. - ** Note **: Up to two lines, slanted and straight. The angle should be as large as possible. Sometimes, it can be used to coordinate with the opponent's middle. 4. ** Backhand Quick Shot ** - [Special Effect: Contain the opponent in a match. Occasionally, you can use it to suppress the opponent's backhand and then change the forehand as a tactical cooperation.] - ** Action essentials **: Toss the ball with your left hand and rotate your right arm outward at the same time. The racket face is slightly tilted forward. The upper arm is naturally close to the left side of the body and leads the racket to the left back. When the ball drops from the high point to the middle upper part of the left side of the ball when it is lower than the net height, the forearm will accelerate and swing horizontally to the front right. The wrist will control the racket and apply force to rub the ball. The waist will rotate to the right. 5. ** Reverse spin serve ** - [** Special Effect **: Enrich the variations of the serve rotation and increase the difficulty of the opponent's judgment of the rotation. It is suitable for people who have the ability to attack with a backhand.] - ** Action essentials **: The height of the normal serve is close to the waist position, and the reverse rotation serve is at the chest position. By rubbing the racket at different positions, the topspin ball, the backspin ball, the side topspin ball, and the side backspin ball can be released. 6. ** Hook serve (topspin in the middle)** - ** Special Effect **: Strong rotation, the ball will float in an arc after landing on the stage. It is not easy for the player to parry. It can score directly or create a scoring opportunity. - ** Key points to serve **: Don't throw the ball too high. When hitting the ball, your wrist strength is greater than your forearm strength. Use your body to control the arc. The first point of the serve should be on the table and not too close to the net. When serving, the racket should be more upright. It should rub the lower side of the ball more. The racket head should be higher than the racket face. 7. ** Backhand Long Ball ** - ** Special Effect **: The ball is fast, the landing point is long, and the momentum is large. It is a big threat to the opponent when it is sent to the opponent's backhand baseline position. It can increase the opponent's area of the countertop when used with the short ball in the forehand position, thus creating scoring opportunities. - ** Key points of service **: The ball should not be thrown too high. Increase the speed of the swing at the moment of hitting the ball. The first point of impact should be as close to the end line of the table as possible. 8. ** Forehand short ball ** - ** Special Effect **: Smaller strokes, faster shots. When the ball falls on the opponent's table, the second jump will not come out, making it difficult for the opponent to pull, rush, or pull. It can restrain the opponent's speed. - ** Key points of serving **: Do not throw the ball too high. When hitting the ball, the strength of the wrist is greater than the strength of the forearm. The first point of the serve should be on the table and not too close to the net. The serve action should be similar to the long serve so that it is difficult for the opponent to judge. 9. ** Spinning and not spinning balls **: Using similar techniques to send out a ball with strong spin (usually a backspin ball) and basically no spin, making it difficult for the other party to judge. It is easy to make mistakes when receiving the serve, resulting in passive or even direct loss of points. While watching the Olympics, you can also read the wonderful novels related to the Olympics!