The main way of industrial production of sulfuric acid is the amidation method. The reaction conditions, methods, and processes are as follows: 1. ** Reaction conditions and raw material preparation ** - The raw materials were nitrogen and air, which were mixed according to the ratio of oxygen: nitrogen = 2:1. - The reaction needed to be carried out at a high temperature, ranging from 760 to 840 ° C, and required the use of platinum-titanium alloy mesh as a catalyst. 2. ** Reaction process ** - Oxidation of nitrogen: Under the conditions of high heat (760 - 840 ° C) and platinum-titanium alloy mesh, nitrogen is oxided to nitrogen dioxide (NO). - Further oxidization of nitrogen dioxide: The generated nitrogen dioxide is further oxided into nitrogen dioxide (NO <2>) by the residual oxygen after the reaction. - The preparation of sulfuric acid: the nitrogen dioxide is added into the water to prepare sulfuric acid. In addition, there was a traditional method of preparing sulfuric acid by reacting sulfuric acid with saltpeter. However, in modern industrial production, the amidation method was the main method. Read more exciting novels for free
The industrial preparation of sulfuric acid mainly has the following reaction conditions: 1. ** Reaction using nitrogen and air as raw materials ** - Firstly, using the Pt-Ru alloy mesh as a catalyst, the reaction was carried out in an oxidization furnace at 800 ° C. The reaction equation was: 4NH3 + 5O2 = catalyst, high temperature = 4NO +6H2O. - The generated NO will react with O2 to form NO2 when cooled, and the equation is: 2NO+O2 = 2NO2. - The NO2 is absorbed by water in the absorption tower and converted into sulfuric acid under the effect of excess O2 in the air. The highest concentration can reach 50%. The reaction equation is: 4NO2 +O2+ 2H2O = 4HNO3. - The 50% of the prepared sulfuric acid could be used as a water absorbing agent by using titanium or concentrated H2SO4. Distillation could obtain high concentration of sulfuric acid, or even more than 98% of "fuming" sulfuric acid. - During the production process, NO could be recycled to maximize the use of raw materials and reduce the discharge of NOX in the exhaust gas. The exhaust gas was generally absorbed by a solution of NaOx to produce an oxido-reduction reaction. 2. ** Reaction under mild conditions (new research result)** - The China Academy of Sciences Dalian Institute of Chemistry and Physics reported the direct conversion of air to nitrates under environmental conditions (25°C and 0.1 Pa) through a heterogenious and uniform electrochemistry pathway, which was mediate by the radical. Compared to the reversibility of the hydrogen at the negative pole, the conversion was carried out at a reduction potential of 0V, which could achieve a Farad efficiency of 25.37%, and had over 99% nitric-acid selectively. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reference mentioned that there were different reactions between sulfuric acid and sulfuric acid. When there was enough sulfuric acid, the reaction could proceed smoothly and produce sulfur dioxide gas; when there was a small amount of sulfuric acid, if the concentration of the two substances was not high, the reaction would be slow and no obvious phenomenon could be seen. The reaction conditions here described the influence of the amount of sulfuric acid on the reaction phenomenon and reaction process. A sufficient amount of sulfuric acid could accelerate the reaction and produce obvious phenomena, while a small amount of sulfuric acid could slow the reaction and even make it difficult to detect the reaction phenomenon. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The industrial preparation of sulfuric acid mainly uses the amidation method. The reaction types, equations, and phenomena are as follows: ** I. Oxidation of nitrogen to nitrogen dioxide ** 1. ** Reaction Type ** - Oxidation reaction. The valency of the nitrogen element in nitrogen (NH3) increased from-3 to +2 in nitrogen monoxide (NO), losing electrons and being oxided. 2. ** Chemistry Formula ** - <p></p></p></p>><p> 4NH3 + 5O2> 3. ** Phenomenon ** - Under the hot (760 - 840 ° C) platinum-titanium alloy mesh, a mixture of nitrogen and air (oxygen: nitrogen = 2:1) reacted, releasing heat during the reaction. ** 2. Oxidation of nitrogen dioxide to nitrogen dioxide ** 1. ** Reaction Type ** - Oxidation reaction. The valency of the nitrogen element in the nitrogen dioxide (NO) increased from +2 to +4 in the nitrogen dioxide (NO2), and it was oxided. 2. ** Chemistry Formula ** - \(2NO+O_2 = 2NO_2\) 3. ** Phenomenon ** - The colorless nitrogen dioxide gas reacted with oxygen to form reddish-brown nitrogen dioxide gas. ** 3. The reaction of nitrogen dioxide and water to form sulfuric acid ** 1. ** Reaction Type ** - Oxidation-reduction reaction. The chemical valency of the nitrogen element in nitrogen dioxide (<anno data-annotation-id ="00000000 - 4f00 - 4f00 - 8f000f000000"> NO2 </anno>) both increased and decreased, causing a dismutation reaction. 2. ** Chemistry Formula ** - \(3NO_2 + H_2O=2HNO_3+NO\) 3. ** Phenomenon ** - When the reddish-brown nitrogen dioxide gas was passed into the water, the color of the gas gradually became lighter, and the solution became acidic. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reaction between phosphorus and concentrated sulfuric acid was an oxido-reduction reaction. The oxidisation of concentrated sulfuric acid was more obvious under heating conditions, so the reaction needed to be heated. This reaction condition indicated that the reaction was difficult to occur at room temperature or the reaction rate was extremely slow. By heating to provide energy to promote the reaction, the reaction between phosphorus and concentrated sulfuric acid could occur according to the chemical equation 2P +5H2SO4 (concentrated)= 5SO2 + 2H2O +2H3PO4. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reaction between copper and concentrated sulfuric acid required heating. Under heating conditions, copper gradually dissolved and bubbles were formed. The gas produced could turn purple litmus red or the fuchsia solution faded. After cooling, the solution diluted and turned blue. The reaction equation was: CuSO4 + SO2 → +2H2O. At the same time, there are side reactions such as 5Cu +4H2SO4 (concentrated)(heating)= 3CuSO4 + Cu2S +4H2O. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The chemical reaction condition of the reaction between iron and diluted sulfuric acid was the presence of diluted sulfuric acid. In this reaction, iron reacted with dilute sulfuric acid to form FeSO2 and hydrogen. The chemical equation was: FeSO2 = FeSO2 + H2. The reaction phenomena included slow reaction speed, the formation of bubbles, the solution slowly turning from colorless to light green, and the gas generated in the reaction could burn and produce blue flames when burned. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Ferric acid reacted with sulfuric acid to form a light green solution, which was because the product was a hydratable iron ion. If there was more of it, it would produce chloride-ions, and the solution would turn yellow. Moreover, the addition of sulfuric acid would suppress the decomposition of iron ions. The concentration of iron ions would increase, and the yellow color should be deepened. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
There was no reaction between Na2SO4 and CH3COH. Because the acid was weak and the sulfuric acid was strong, the reaction of the weak against the strong usually could not happen. Therefore, there were no reaction equations and reaction phenomena, so it was impossible to provide a summary in the form of a table. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Under normal circumstances, there would be no chemical reaction between sulfuric acid (HQ) and alcohol (the main component of white wine is alcohol, C Chi H Oh) under normal conditions, so there would be no reaction. However, under some special conditions, such as the presence of strong oxidisers, complex reactions may occur. The products will be more complicated and not typical, and it is difficult to describe the reaction phenomenon. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
从化学原理角度看,铁粉与稀硝酸反应主要涉及硝酸的氧化性以及铁的还原性。在常温常压下即可发生反应。 1. 当稀硝酸过量时: - 反应方程式为\(Fe + 4HNO_{3}=Fe(NO_{3})_{3}+NO↑ + 2H_{2}O\)。 - 这里硝酸体现强氧化性,将铁氧化为\(Fe^{3 + }\),硝酸中的氮元素从\( + 5\)价被还原为\( + 2\)价的\(NO\)。 2. 当铁粉过量时: - 反应方程式为\(3Fe+8HNO_{3}(稀)=3Fe(NO_{3})_{2}+2NO↑ + 4H_{2}O\)。 - 过量的铁会与生成的\(Fe^{3 + }\)进一步反应,将\(Fe^{3 + }\)还原为\(Fe^{2 + }\),最终产物为硝酸亚铁。 <a href="/?from=ask_words" style="color:red" target="_blank">点击前往免费阅读更多精彩小说</a>