webnovel
How to serve a table tennis ball? It's the most difficult to receive the ball

How to serve a table tennis ball? It's the most difficult to receive the ball

2026-11-17 19:06
1 answer

Generally speaking, an active serve would cause difficulties for the receiver because it would not be interfered with by the opponent. For example, a low and short weak topspin ball. This kind of ball was short and light, and it was easy to get high when rubbing the ball. It was also difficult to deal with the short swing, which was difficult for amateurs to catch. There was also the running ball, which was fast. The receiver needed to have a fast reaction speed and swing speed, or he had to move far enough to adjust his body position before he could hit it back. In addition, when the speed of the serve is very fast, such as the fast ball, it is also more difficult to receive, because it is very difficult for the receiver to take the initiative to force the ball. It is necessary to accurately aim at the ball and use the speed to receive it. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

How to serve the table tennis ball is the most difficult to receive teaching video

There is no content specifically provided about the teaching video on how to receive the most difficult serve in table tennis. Sorry, according to the information retrieved, I don't know how to answer. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-11-06 13:18

How to serve a table tennis ball so that the opponent can't receive the ball

Here are some serving techniques that can make it difficult for an opponent to receive a ping pong ball: 1. ** Side Spinning Serve **: - Standing in the middle of the teeing ground, he threw the ball up to his waist. When the ball is level with the net, quickly hit the ball horizontally and turn your body to the right. This way, the ball would fall to one side, and when the ball bounced to the left after landing, there would be a strong topspin. This change in side spin and landing point might make it difficult for the opponent to adapt to receiving the ball. 2. ** Backspin serve **: - Standing in the middle of the teeing ground, the ball was thrown up to his waist. When the ball falls on the net, it will be hit horizontally and turn to the right to make the ball fall to one side. After the ball falls on the table, there will be a strong backspin when it bounces to the right. Backspin serves were slow and light, but the arc was low and long, creating friction when the opponent received the ball, weakening the rebound force of the ball and making it difficult for the opponent to adapt. 3. ** High Toss Serve **: - He threw the ball high up, about the same height as his head, and then used his body to drive his arm to hit the ball, mainly with his wrist, while his body turned in the same direction. This would make the ball's landing point variable, making it difficult for the opponent to judge the ball's landing point and thus increasing the difficulty of receiving the ball. 4. ** Cross Step Serve **: - Standing in the middle of the teeing ground, the ball was thrown at waist level. When the ball is level with the net, quickly hit the ball horizontally and make it fall to one side, then quickly take a step to the other side (cross step). Using this method to create an illusion to confuse the opponent, making it difficult for the opponent to judge the route of the ball. 5. ** Squatting serve **: - Standing in the middle of the teeing ground, the ball was thrown at waist level. When the ball falls in line with the net, he will quickly hit the ball horizontally and make it fall to the side. Then he will quickly squat down to create an arc to confuse the opponent, making it difficult for the opponent to judge the route of the ball. At the same time, there were some important points to pay attention to when serving: 1. ** Rubbing Technique **: To find the feeling of friction, when you serve the ball, your wrist will suddenly rub hard, and the ball will turn. 2. ** Hit Point **: The hit point is close to the body, so it is easier to use the strength of the wrist and the ball is easier to control. 3. ** Power control of serve **: When serving a short ball, you must hold your hand. 4. ** Avoiding wrong movements **: Do not send the forearm forward when serving the side spin, otherwise the ball will become a "shock wave"(running ball); if the feint after the serve is a backward swing, pay attention to controlling the shape of the board. Pay attention to the wrist force when serving the reverse rotation. The wrist should be retracted and the force should be rubbed. Don't rely on your arm to swing the racket because you are uncomfortable. When the ball was served, he could also add the force of turning the waist to make the ball spin more. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-11-04 02:42

How to serve a table tennis ball

In order to make the table tennis ball spin, you need to pay attention to the following aspects: 1. * * Racquet Lead **: The distance of the racquet lead should not be too small, just like the fist lead before the attack. A sufficient racquet lead can provide more power for the serve. 2. * * Explosive force **: Explosive force is the instantaneous force of the racket against the ball. Before the racket touched the ball, the body should be as relaxed as possible. The moment the racket touched the ball, the body should be taut to increase the instantaneous force of the racket on the ball. Although many people felt that their explosive strength was insufficient, without professional explosive strength training, there was not much difference between them. The key was the rationality of their movements. 3. The combination of the waist and the hands was something that many people tended to overlook. You can't just rely on your wrist strength when you serve. You have to use your waist strength like pulling a loop ball. By moving sideways, your waist and hands can work together. 4. * * Rubbing **: Rubbing is the key to serving. Good friction could be called "very solid and thin friction", which meant that the ball stayed on the racket for a long time. It felt like a lot of force was used, but the ball was not hit quickly, but there was sufficient friction. 5. * * Racquet Form **: The shape of the racket is different for different rotations. For example, when serving a side spin, the racket is generally upright; when serving a backspin, the racket is generally flat, which helps to reduce hitting and increase friction. 6. * * Ball contact point and ball exit point **: Including the ball contact point on the racket and the part where the racket hits the ball. For example, the head of the racket is the strongest when swinging, and the top left side of the racket (when the racket faces you) is the best contact point when the racket is flat when serving a backspin. The best part of the racket to rub the ball is usually the bottom of the ball. 7. * * Contact timing **: Choose the right contact timing to minimize the spinning loss of the ball on the stage and make the ball jump low and flat. This had three advantages: first, it reduced the spinning loss of the ball, second, the ball speed was relatively faster and more aggressive, and third, it increased the probability of the opponent getting off the net. 8. [Finger strength: This is also a point that is often overlooked.] The fingers that were in direct contact with the racket face had to use force to withstand the serve. Otherwise, even if the whole body used force, the ball would not spin. For example, when the ball was served, some people had the same movements. They only needed to adjust with their fingers. The ball would spin when they exerted force with their fingers, and the ball would not spin if they did not exert force. 9. * * Combined force **: After throwing the ball, there is a downward gravity when the ball falls. When you serve, you must combine this force with the forward direction of the force to produce a greater forward force, but it is not the combined force of a foul. In terms of the specific type of serve: - * * Side spin serve **: Set the table tennis racket upright and rub the side of the ball. If the ball was served with a side spin, after rubbing the side of the ball, the wrist quickly lifted up and rubbed forward and upward; if the ball was served with a side spin, after rubbing the ball, the wrist rubbed forward and downward, and the head of the racket touched the table tennis ball first. Pay attention to the rotation of your body when you serve. Don't hold hands, don't stiffen your arms, and sink your body. Use your body to drive your wrist to rub, and your fingers will instantly accelerate. - [Backspin Ball]: Grip the racket's shoulder and let the wrist rotate freely to increase friction and rotation. The bottom of the ball was rubbed against the rubber, and the head of the racket was rubbed against the rubber first. The longer the friction accelerated, the stronger the rotation. When hitting the ball, the ping pong ball should fall to the height of the waist, and at the same time, the waist should rotate to drive the ball. - [Reverse Spinning Serve (Right Spinning Serve): Mainly uses the body's movement. With the elbow as the pivot point, the arm swings like a pendulum to exert force, plus the instantaneous explosive force of the wrist.] For a right side topspin, touch the right side of the ball and rub it forward and upward; for a right side downspin, touch the right side of the ball and rub it forward and downward. The simplified action could be to directly pull the ball into the arms at the moment of throwing the ball. The elbow pointed to the outside of the body, and the elbow leaned against the body at the moment of the release. The hand made an outward movement to reduce the impact on the ball as much as possible, and accelerated along the direction of the racket to increase the friction effect. When practicing, you should start with a long serve. When you are close to the baseline, you should release the ball quickly and suddenly. Then, you should exert force. At the same time, you should exert force with the center of gravity. The point of contact should not be too high. After you are familiar with it, you should lower and shorten the arc. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-10-26 05:38

How to serve a table tennis ball

Table tennis serve techniques are generally composed of two parts: throwing the ball and swinging the racket to touch the ball. The key points of all kinds of serve are as follows: 1. The throw must be stable, including the height of the throw and the path of the ball rising and falling after the throw. 2. The height of the ball contact point needs to be appropriate. The contact point of the long ball should be lower, and the contact point of the short ball should be higher. 3. The first jump of the ball on the table should be appropriate. The first jump of the long ball should be close to the end line of the table, and the short ball should be in the middle of the table. 4. When holding the racket, the web between the thumb and forefinger should not be too tight to ensure the flexibility of the wrist and fingers. 5. The lead, especially the wrist, had to be sufficient. 6. The forward and downward force of the arm and wrist should be skillful to avoid the ball falling into the net, jumping too high or going out of bounds. 7. The part of the racket that rubbed the ball and the direction of the force must be accurate. Try to use similar movements to send out balls with different rotations. 8. Focus on the strength of the forearms and wrists, and pay attention to the coordination of the waist to improve the quality of the serve. Take the right hand as an example, the center of gravity of the body moves from the right foot to the left foot when the serve is performed with the forehand, and the opposite when the serve is performed with the backhand. After each contact with the ball, the arm should be waved and quickly restored. The common serve techniques were: 1. ** Forehand flat serve **: Toss the ball up with your left hand. At the same time, rotate your right arm inward to make the racquet face slightly forward, and pull the racquet to the right. When the ball descends from the high point to slightly above the net, the upper part of the ball is shot to the left. 2. ** Backhand flat serve **: Toss the ball up with your left hand, and at the same time, rotate your right arm so that the racquet face is slightly forward and the racquet is pulled back to the left. When the ball drops from the high point to slightly above the net, the upper part of the shot is exerted to the right front. 3. ** Forehand serve right side topspin long ball (running ball)**: Throw the ball up with your left hand. At the same time, rotate your right arm inward to make the racquet face slightly forward. The forearm wrist naturally droops, the elbow joint is higher than the forearm, and the racquet is pulled back to the right. When the ball dropped from the high point to the height of the net, the right side of the ball rubbed against the right side. The moment the ball touched the ball, the thumb pressed down and the wrist shook from the right back to the left. 4. ** Backhand rush shot **: Throw the ball up with your left hand. At the same time, rotate your right arm outward to make the racquet face slightly forward. The upper arm will naturally be close to the left side of the body, and the racquet will be pulled to the left back. When the ball dropped from the high point to below the net height, the upper left side of the ball was hit, and the forearm accelerated to the upper right when it touched the ball. The wrist controlled the racket to apply force to rub the ball, and the waist rotated to the right. 5. ** Reverse spin serve **: The hitting point is at the chest position (the height of the normal serve is close to the waist). By rubbing different positions of the racket, the topspin ball, the backspin ball, the side topspin ball, and the side backspin ball can be sent out. 6. ** Hook serve **: Do not throw the ball too high. When hitting the ball, the strength of the wrist is greater than the strength of the forearm. Control the arc with your body. The first landing point of the serve should be on the table and not too close to the net. When serving, the racket should be more upright and rub the lower side of the ball. The head of the racket should be higher than the surface of the racket. 7. ** Backhand Long Ball **: The ball should not be thrown too high. Increase the speed of the swing at the moment of hitting the ball. The first landing point should be as close to the end line of the table as possible. 8. ** Forehand short ball **: Do not throw the ball too high. When hitting the ball, the wrist strength is greater than the forearm strength. The first point of the serve should be on the table and not too close to the net. The serve action should be similar to the long serve. 9. ** Forehand Running Ball **: The ball should not be thrown too high. Increase the speed of the swing at the moment of hitting the ball. The first landing point should be as close to the end line of the table as possible. The hitting point should be the same height as the net or slightly lower than the net. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-11-02 07:32

The most difficult way to receive a serve in table tennis

In table tennis, it was difficult to pinpoint which serve was the most difficult to receive because it was influenced by many factors. However, some serve with complex rotation, tricky landing points, or fast speed were often difficult to receive. For example, if the server could send out a strong side spin ball, the flight trajectory of the ball would have a large sideways deviation. The receiver needed to accurately determine the direction of rotation and adjust the racket shape to receive the ball. Otherwise, the ball would easily slide away from the edge of the racket or the quality of the ball returned after receiving the ball would be very low. Another example was the serve of a spin ball. The ball spun strongly and usually fell near the net to become a short ball. This kind of ball could easily cause the receiver to rub the ball high or fall into the net. If one wanted to attack with a pick or twist, it required a very high level of skill to deal with it, because the strong spin would make the ball sink and difficult to control. Another example was the high toss serve, which combined the speed and rotation brought by the high toss. When the ball fell, the gravitational acceleration increased the speed of the ball. At the same time, the server could also add a strong rotation, making it difficult for the receiver to judge the rotation and speed of the ball, increasing the difficulty of receiving the ball. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-27 02:04

How to serve the table tennis ball with backspin

There were two ways to serve the backspin ball in table tennis: chopping and thin friction. Chop Down Spinning: - It is commonly seen in the serve of the forehand hook. It creates a backspin effect by chopping the ball downward. It can send out a long arc and a fast ball. It can also send out spinning and non-spinning balls through similar actions to confuse the opponent. However, the backspin effect was not particularly strong. If the concealment was poor or the opponent accurately judged it, the opponent might directly backhand to follow up or twist the ball. - The main point of the action was to hit the ball from top to bottom, using the direction of the racket face away from the center of the ball to produce a Tangential Force to make the ball spin. The speed of the wrist shake determined the strength of the spin, and the slow shake would weaken the effect of the spin. - If you don't perform a downward chop, you can hit the ball with the upper part of the racket face forward to make a non-spinning ball. It can speed up the ball touching action and combine it with the downward chopping action to confuse the opponent. It seems that the ball is actually pushed forward. This kind of serve was relatively easy and suitable for beginners to practice. Thin friction backspin serve: - It can make the ball produce a strong rotation and a short arc, making it difficult for the opponent to directly lift the board, but it is easy to miss the ball and it is difficult to control the landing point, which is more difficult. - When you serve, you can slightly raise the racket face, rub the lower part of the front part of the ball to produce a rotation and increase the depth of the contact area. Slightly hook the wrist, and rub the racket face to the lower part of the front part to produce a rotation effect to make the ball rebound. - Beginners can try a single action first, without adjusting the angle of the racket face, through hook practice to make the ball rebound, and then gradually add the racket action to prevent the ball from going out of bounds. In addition, there were some key points to serve using the right hand holding the horizontal racket as an example: - In terms of the shape of the board, the pure backspin ball can only be used to hit the racket face to face (no matter straight or horizontal). The board shape must be placed horizontally in front of the body and back. - Touch point (right hand as an example), if a table tennis ball is drawn on a vertical axis, the backspin ball touch point should be directly below the vertical axis. It can be slightly to the right, but not to the left. - There was also a shift in the center of gravity when serving. - In terms of the wrist, the wrist was opened when the racket was pulled. The straight plate was used to push the middle finger against the ball plate, the index finger was hooked inward to cooperate with the force, and the horizontal plate was used to pinch the ball plate. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-14 21:30

How to serve a beginner table tennis ball

The following are some table tennis serving methods suitable for beginners: ** 1. Forehand run serve ** 1. ** Special traits **: The ball is fast, the landing point is long, and the impact is strong. When the ball is sent to the opponent's right corner or left center position, it will be difficult for the opponent to receive the ball. 2. ** Important points **: Don't throw the ball too high; increase the swing speed and strength at the moment of hitting the ball; the first landing point should be close to the end line of your own table. ** 2. Short serve ** 1. ** Special features **: Small stroke, fast shot, the ball will not jump off the stage after the second jump after landing on the opponent's table, can make the opponent unprepared, the opponent's pull, rush and other actions are more difficult to deal with. 2. ** Important points **: The height of the ball should not be too high; the strength of the wrist should be greater than that of the forearm when hitting the ball; the serve position should be on the table but not too close to the net; the serve action should be similar to the longball to confuse the opponent. ** 3. Forehand serve with left side top (bottom) spin ** 1. [** Characteristic **: The left side has a strong upward (downward) rotation force. When the opponent blocks the ball, the ball will bounce upward (downward) to the right. Generally, the player will stand on the left side of the center line or serve the ball sideways.] 2. ** Important points **: When serving, keep your abdomen in and don't move the ball away from your body. Try to increase the swing from right to left to increase the strength of the side spin. When you spin up from the left side, your wrist will quickly retract and the racket will rub from the center of the ball to the upper left. When you spin down from the left side, the racket will lean back and rub from the lower middle of the ball to the lower left. ** 4. Backhand right side top (bottom) spin shot ** 1. ** Special features **: There is a strong upspin (downspin) on the right side. After the opponent blocks it, it will bounce up (down) to the left side. The best position to serve is the left side of the long ball and the right side of the short ball near the net. 2. ** Key points **: Pay attention to the abdomen and waist; make full use of the wrist rotation and forearm strength; when the ball is topspun on the right side, the racket will rub from the middle of the ball to the upper right at the moment of hitting the ball, and the wrist will hook upwards; when the ball is spun down, the racquet face will tilt backward later. At the moment of hitting the ball, the racket will rub from the middle lower part of the ball to the lower right part. ** 5. Backhand serve and backspin serve ** 1. ** Characteristics **: The ball is fast, the arc is low, and the force of the forward shot is large, forcing the opponent to retreat to receive the ball. It is conducive to aggressive attacks and is often used with fast backspin balls. 2. ** Important points **: The hitting point should be on the front left side of the body, the same height as the net or slightly lower; pay attention to the wrist swing; the first landing point should be near the terminal station of your own station. ** 6. Forehand spin and no-spin ** 1. [** Characteristic **: The ball is slow and the forward momentum is small. It mainly uses similar serve movements to create rotation changes to confuse the opponent, causing the opponent to make a mistake in receiving the serve or creating opportunities for oneself to attack.] 2. ** Important points **: Don't throw the ball too high; when turning the ball, restrain your face in the later stages and cut the middle and lower part of the ball; the more you spin the ball, the more you have to pay attention to the forward movement of your arms; when the ball doesn't turn, instantly reduce the angle of the back swing of the face and increase the force of the forward push. ** 7. Forehand high toss serve ** 1. ** Special features **: The high toss is a prominent feature. It increases the positive pressure on the racket when the ball falls. The serve speed is fast, the impact is large, and the rotation changes are many. After landing, it turns around and flies, but it is more complicated and has a certain degree of difficulty. 2. ** Important points **: When throwing the ball, don't be too far away from the table. The hitting point should be the same height as the net or slightly lower than the net. It's best to be close to the middle of the waist and slightly to the right (15cm). Try to increase the range and arc of the inward swing. The upper left spin ball and the lower spin ball are the same as the low throw ball. After touching the ball, add a recovery action to the right front to increase the opponent's judgment (combined with the right spin is more powerful). In addition, when serving with a straight board and a horizontal board grip, the horizontal board grip can lift the fingers up. There are many grip methods, and you can choose according to your own habits. The key is to turn the ball. The pattern should be maintained at 45 degrees. Practice friction first, and then determine the distance between the ball's first landing point and the net (20 to 30 centimeters). Novice players could also learn the hook serve (right side spin serve), left side spin serve, reverse spin serve, and other skills: - ** Hook serve (right side spin serve)**: When spinning sideways, use the racket head at two o'clock to rub the bottom of the right side of the ball. The moment the ball is touched, the wrist will be lifted up and rubbed, making it easy for the opponent to receive the ball out of bounds. When spinning sideways, use the racket head at ten o'clock to rub the bottom of the right side of the ball. The moment the ball is touched, the racket head will rub forward and downward, making it easy for the opponent to return the ball and drop into the net. - ** Left Spinning Serve **: When the racket is pulled, the waist will move the wrist, and the elbow joint will follow the body. When the finger touches, the finger will instantly accelerate. When the side of the ball is rotated downward, the head of the racquet touches the ball at ten o'clock. The left side of the ball is rubbed downward, and the opponent's return is easy to fall into the net. When the side of the ball is rotated upward, the head of the racquet touches the ball and rubs the left side of the ball. The opponent is easy to get out of bounds. - [Reverse spin serve (a type of right side spin): Use your body to move your wrist to form a pendulum force.] When the reverse rotation is performed, the head of the racquet touches the right side of the ball and is lifted upward, so that the opponent can easily get out of bounds; When the reverse rotation is performed, the head of the racquet touches the right side of the ball and then rubs forward and downward, so that the opponent can easily get out of the net. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-11-13 19:32

How to receive a serve in table tennis

There are many ways to receive a ball in table tennis. The following are some common points: ** 1. Receiving and Receiving Different Balls ** 1. ** Play billiards ** - The "hanging" ball was more ideal because it had an arc and the landing point was easy to control. After determining the rotation of the opponent's incoming ball, it can be changed to "pull" or "charge". Generally, when a spinning billiard ball was "hung", it could wrap the upper part of the ball during the fall or late stage of the ball. When it was stable, it could wrap the side of the ball and use a small center of gravity and small movements to rub the ball. The landing point could be controlled in the middle of the opponent's table. - If you are used to using the "rub" to catch the billiard ball, you should slow down. If you can catch the ball, let the ball come out, but not lower than the table. You should have the feeling of "cutting". When you are unclear, send it to the center line of the table. 2. ** Long ball (mostly topspin)** - Don't step back, because stepping back will lower the ball below the net. Don't take the racket down. It should be parallel to the incoming ball or even slightly higher. Don't take the racket up. In the beginning, he would first connect the joints steadily, then pursue quality on the basis of stability. 3. ** Inside the stage ** - For some balls inside the table, the straight backhand could use the method of cutting and squeezing to receive the ball along the rotation of the incoming ball. The long ball should borrow more force, and the slow and side-turning ball should be rubbed back along the rotation. It was necessary to control the shape of the ball. ** Second, the overall strategy of receiving the ball ** 1. ** Increase Change ** - The receiving of the serve should be varied, including the drop point, rotation, and technique (such as cutting or splitting long, short, picking, squeezing, pulling, throwing, rushing, etc.). The opponent should not be "standing" and should disrupt the opponent's rhythm. 2. ** Judged the incoming ball ** - He had to adjust his position according to the position of the opponent when he served the ball (generally using the diagonally opposite method), and then judge the rotation and landing point of the ball according to the direction of the opponent's arm swing, the range, the angle of the racket, as well as the flight arc and speed of the ball. In particular, he had to clearly see the position of the opponent's racket when it touched the ball and the direction of the swing, and then use the targeted technique to return the ball. 3. ** Distinguish between different spheres ** - ** Running ball and short ball **: By looking at the first landing point of the table tennis ball after the opponent serves, the landing point near the body is the long ball, and the landing point near the net bag is the short ball. - ** Spinning and non-spinning balls **: You can judge by listening to the sound of hitting the ball (the friction sound is small and the hitting sound is loud), looking at the ball mark (when the ball mark is visible for a short time, you can consider attacking), feeling the ball's trajectory (the non-spinning ball's trajectory is smooth and regular), etc. - ** Side topspin and side downspin **: Pay attention to the friction position of the opponent's racket face when serving the ball (the friction distance of the upper edge of the racket is small and it is difficult to spin the ball), and judge whether the shaking moment is downward or upward (downward is downspin, upward is topspin). While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-11-09 11:41

Table tennis training ball

There are many types of table tennis balls on the market. For example, the Double Happiness DPS had a table tennis training machine with a 40+ new material white table tennis ball; the Venison had a factory direct sale and wholesale of the new material of the three-star ABS 40+ high-elastic table tennis ball. Decathlon's table tennis training balls were 40+ABS one-star white balls, 6 sets, made of 40+ABS material. This material made the ball have excellent wear resistance, endurance and elasticity, which could guarantee good flight performance and stability after multiple hits. Its star rating was one-star, suitable for beginners and intermediate level table tennis enthusiasts to improve their skills and training effects. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-21 10:34

The table tennis ball receives the ball with a backhand spin

There were many situations and techniques to deal with the backhand spin in table tennis: * * 1. Catch the left side spin ball ** When the opponent serves a left-hand spin (the left side of the ball will produce a strong left-hand spin, and the ball will turn to the left side of the body), you should quickly step forward, decisively cut to the right side of the ball and step forward, and press down at the same time. * * 2. Receiving the right spin (reverse spin serve)** 1. Backhand Catch: Quickly step forward and cut the left side of the incoming ball. Pay attention to rubbing the ball and press your body down. 2. Forehand Connection: After stepping forward, rub the left side of the incoming ball. The racket should be open to better rub the left side of the incoming ball. * * 3. Receiving Backspin (Spinning serve)** After taking a step forward, he placed the racket flat, rubbed the bottom of the incoming ball, and sent it forward. For the backhand catch, he would also put the racket flat after taking a step forward, quickly rub the bottom of the incoming ball, and take the initiative to rotate and rub the ball out. In addition, the backhand twist and pull technique could also be used to catch the ball. The twisting and pulling was mainly applicable to the short ball sent by the other party (the ball that could not be released after the second jump). If the incoming ball has a strong side spin or back spin, it's best to touch the side of the ball (side twist); if it's a topspin or no spin, you can twist the ball directly (forward twist). The purpose of the side twist was to offset the side spin and downspin of the incoming ball. For example, when the ball was purely downspin, the racket had to stand up and touch the left side of the ball to offset the downspin. The forward twist required a high amount of strength from the fingers and wrists. It was easier for amateur players to pull the downspin ball over the net by using the side twist. There are many points to pay attention to when twisting and pulling, such as stepping on time.(When judging a short ball, take a small step with your left foot first, and then follow the table with your right foot), raise your arm (Create space for forearm and wrist to retract), Elbow forward (Draw a circle with the elbow as the center and no longer lift the arm up), wrist hook (According to the speed of the incoming ball and the situation of the step, the more the inner hook is, the more power it will exert), a large forward (after touching the ball, you have to exert force forward and experience the action of stepping on the ground and pushing forward), the racket face adjustment (the back spin racket face stands up, the top spin ball presses the racket face), and the use of the racket head to hit the ball (the upper arm is raised, the elbow is pressed against the joint, and the wrist is hooked, it is easy to realize the racket head contact with the ball, and the power will be more sufficient), and finally the instantaneous power (the previous action is relaxed, and the power is released instantly). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-11-11 13:33
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z