webnovel
There was no reaction from the Legend computer when it was turned on.

There was no reaction from the Legend computer when it was turned on.

2026-11-20 10:52
1 answer

If there is no response when the computer is turned on, you can try the following methods: 1. ** Safe mode adjustment **: Check whether the power cable of the monitor is loose. If the cable between the computer and the monitor is not properly connected, the monitor may not display normally. If the monitor power light is on, try to click F8 to enter the safe mode. In the safe mode, you can unload the recently installed software or drivers, or perform a virus scan. If you can't enter the safe mode, it may be a hardware failure or a complete system crash. You need to seek the help of professional maintenance personnel. 2. ** Release battery static electricity (for laptop)**: First, cut off the battery and power cable of the laptop, so that the laptop is completely unpowered. Then, press the power button repeatedly 6 - 8 times for 6 - 8 seconds each time to clear the internal static electricity of the laptop. Then, reconnect the power cable and try to turn it on. If the computer still can't be turned on normally, you can try reinstalling the system with a USB flash drive (if you don't have a USB flash drive, you can use other people's equipment to make it), and reinstall it through the USB flash drive when the computer starts up. 3. ** Check the hard disk and memory **: Turn off the computer power first and check if the hard disk and memory stick are loose, because long-term use may cause them to be loose and make the computer unable to turn on. He could find a clean eraser to wipe the metal part of the memory stick to remove dust and avoid poor contact. Then, he could re-install the hard disk and memory stick, make sure they were inserted into the correct slot, and finally connect the power to try to turn it on. 4. ** Check hardware connection (for desktop computers)**: Check the power charger and power cord to make sure that the power charger is connected to the power outlet and the plug is firmly inserted into the interface between the power charger and the computer. Check the power cord for visible damage. If the computer is battery-powered, make sure the battery is installed properly and has sufficient power. Also, unplug and reconnect all external devices, such as mouse, keyboard, monitor, etc. You can also try to reset the computer or enter safe mode. Sometimes, hard drive problems may also cause it to fail to boot. Read more exciting novels for free

Forgotten Legend of the Bloodied Flower

Forgotten Legend of the Bloodied Flower

“Live the life you want this time.” A peerless assassin, codename: Hua, has already started her career ever since she was a child. Her mission’s record was perfect and whoever deemed to be her enemies would end up dead without knowing why. When war ended, she was sent to an institution where she was watched heavily. The doctor in charge gave her an ordinary wuxia novel to read. An avalanche struck after she had finished reading. When she woke up, she had turned into Nan Hua, the young miss of a powerful military family in the novel she read. The girl was also the former main character’s fiancée, who would die because of obstructing the main character’s love. Now that she had taken over, who would dare to act so presumptuously around her? They would never know how they ended up so miserably! But… main character, what are you doing loitering around her? Shouldn’t you focus on the impeding war and saving your female lead? Why are you trying all ways to win her instead, ah? ... Story set in fictional world with similar culture to Ancient China. Join the discord to chat with the author and other readers: https://discord.gg/pBy2wGB ... P.S: This story is published in Amazon too, if you do read there, kindly leave a review please. Thank you ^^ ... Sequel: Astral Flower [on going] ... Other novels: -Flowers Bloom from Battlefield [complete] - Under the Veil of Night [complete] - 7 Path of the Lilies [on long hiatus] - 1 Year of Beginning [complete] - Villain Lady [complete] - Science and Fantasy [complete] - 2 Years of Restarting [complete] - The Quiet Empress [on going] - The Villain's Little Cat [on going] ... Follow me on IG: @sora100518
History
2750 Chs

Why is the computer not turned on?

There could be many reasons why a computer could not be turned on. First of all, the connection problem of the power cable may cause the computer to not turn on. Make sure that the power cord is tightly connected to the main board, and the power supply to the processor and the main board must also be properly connected. Secondly, the state of the power switch might also affect the computer's boot. Make sure the power switch is in the correct position. In addition, improper installation of the cooler could also cause the computer to fail to boot. Be careful not to be too loose or too tight when installing the heat sink. In addition, the computer may encounter problems such as CPU overheating, core hardware failure, or insufficient power supply, causing it to fail to boot. For these problems, you can try to clean the dust inside the CPU cooler and the case, and then try to power it up again after adding some silicon grease. If it was a core hardware failure, the relevant hardware might need to be replaced. If the power supply is insufficient, you can consider replacing the power supply. For Apple computers that could not be turned on, it could be caused by power problems, hardware failures, system problems, or other external factors. First of all, he had to check if the power supply was working properly, and then check for other possible reasons. In short, there could be many reasons why the computer could not be turned on. It needed to be investigated and resolved according to the specific situation.

1 answer
2024-12-24 19:30

The computer doesn't have a memory card, and there's no reaction when it's turned on

When the computer was turned on without a memory card, the monitor would turn black (or there would be no signal), the computer fan was still running, and the power was connected, but it could not be turned on. At the same time, there would be an alarm sound from the main computer case, and the computer would not be able to perform a self-test and would not display any boot screen. This was because the memory was a necessary hardware for the computer. When the computer was turned on, it must first perform the hardware self-test program on the motherboards. Only when the hardware met the boot requirements would the control be transferred to the boot program to start the system. Without the memory stick, this condition could not be met. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-08 06:26

Legend of the computer version

The PC version of Legend of Mir 2 was an unofficial server version developed based on the classic online game Legend of Mir 2. Here are some related content: - [Open a server to avoid pitfalls]: Opening a legendary private server is more complicated and requires a certain amount of technical knowledge and experience. If you want to open a server for a newbie, you need to find an experienced and reliable technical team. By asking them to provide open area cases,(Demonstrate the finished product of the Legendary game. If you provide a game link or login device, you can adjust the initial level 1 account to level 20), Demonstrate technical ability (Show the Legend of Mir 2's program background online through remote internet and briefly explain it for 3 - 5 minutes), determine a reasonable transaction mode (For example, the total cost of making the Legend of Mir 2's PC side is about 5K. It is recommended to pay in three steps. First, pay a few hundred in advance and experience the test server background. Then, according to the version modification content, determine whether to increase the fee and pay part of the fee. Finally, all the acceptance and satisfaction will be settled). - ** Downloading and installation **: Choose a reliable Legendary private server website. After entering, find the client download page. There are two ways to download, normal and high-speed. High-speed download is recommended. After the download was complete, double-click the file to start the installation program. Choose a partition or disk other than the C drive as the installation path. Check the create desktop shortcut and click the install button to wait for the installation to complete. After the installation was complete, he could run the game client. He could click the settings button on the login interface to adjust the resolution and image quality. He could also click the new account button to create a game account. - ** Version-related **: For the more well-known private server versions such as the Legend of CC, the Silent Version had a greater impact. Its predecessor, the Legend of CC, had many designs that attracted players, such as fast character leveling speed (Level 48 could get a unique divine beast, Qilin), new maps (Ant Cave, Autumn Wind Canyon, etc.), and new equipment (White Jade Staff, Blue Spirit Staff, etc.). The private server was similar to the official Legend of Mir 2 in terms of gameplay and content, but it usually provided a richer gaming experience and faster leveling speed. It should be noted that there may be risks in starting a legendary private server. Some private server operations are illegal, so you must be careful when participating. "The Legend of Pengcheng" is equally exciting. Everyone is welcome to click and read it!

1 answer
2026-04-07 13:56

Will there be a mutation reaction in the spread of computer viruses

A computer virus could mutate as it spreads. A computer virus was different from a biological virus. It was a body of code written by a programmer. Its mutation did not occur naturally. Instead, the programmer adapted the virus code and wrote a new virus, such as the " mutation " of a worm virus. The main reason was that the virus would access the computer or server set by the creator. In the absence of an internet connection with the outside world, computer viruses usually did not mutate. However, there was also a view that computer viruses could change their code according to the "environment" and then produce many variants of the virus, but this change was also based on human factors or program settings. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-10 13:35

The computer turned black after connecting to the single-chip computer.

There may be the following reasons and solutions for the black screen after the computer is connected to the single-chip computer: 1. ** USB-to-serial driver problem **: If you use the USB-to-serial cable to connect the computer and the single-chip computer, the USB to serial driver may have a problem and cause a black screen. It is recommended to try changing the driver. The USB connection must be disconnected during operation. 2. ** Driver conflicts **: If you are using the Windows system, sometimes a new hardware driver may cause conflicts. You can go to the device manager to check if there are any devices with yellow exclamation marks and try to update the relevant drivers. 3. ** Too much current **: The temporary crash caused by the excessive current during the single-chip computer burning process may also cause the computer to turn black. Before downloading, check if the power supply is stable or try to reduce the download speed. 4. ** Connection unstable **: The USB to serial cable connection is unstable, or the driver is not installed properly. He tried to pull and plug the wire to make sure the contact was good. If the computer has multiple USB ports, try switching to another one. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-15 17:25

The computer turned on and turned off, repeating over and over again.

If the computer was turned on and then turned off repeatedly, it could be caused by the following reasons: 1. ** Fan problem **: Check whether the power supply fan and CPU fan are running normally. If the fan fails, it may cause the computer to be overheated and turn on and off. 2. ** Memory Bank Problem **: Memory Bank Loosening may cause this situation. You can adjust the memory bank again. 3. ** Flat cable plug problem **: The problem may also occur if the hard disk and the power cable plug of the main board are not secure. You should check their security. 4. ** Power supply stability **: This kind of fault will occur when the power supply is unstable. If the city power is unstable, you can consider changing to a wide-format computer power supply. 5. ** Short circuit problem **: Check the several output circuits of the switching power supply to see if there is a short circuit. This situation may be caused by the computer's continuous restart due to the short circuit protection. 6. ** hardware failure **: It may be due to the damage of the hardware such as the graphics card. You can try to replace the graphics card. It may also be due to the compatibility of other hardware. For example, hardware failures such as motherboards need to be tested and replaced. It is recommended to send them for repair. It may also be caused by a USB device being plugged in. For example, there were cases where similar situations occurred when a USB controller was plugged in. In addition, if the charger was used, there might be problems with the charger. In this case, the charger with a chip was needed to use it normally. While waiting for the TV series, he could also read the exciting content related to this site!

1 answer
2026-10-27 12:42

Xiaoai's mouse was plugged into the computer, but there was no reaction.

If Xiaoai's mouse doesn't work when inserted into the computer, you can investigate from the following aspects: 1. Check if the mouse's switch is turned on. Some mice have a switch and can only be used normally when turned to the ON. 2. Check if the mouse battery is still charged, because it is usually battery-powered, it may need to be replaced. 3. Check if the receiver is loose and if the USB port is damaged. 4. Check if the infrared light of the mouse is blocked. In addition, if the mouse failed indirectly, it might be caused by poor contact. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-06 00:50

Foreigners 'reaction to the Legend of Wukong

Legend of Wukong received a lot of attention overseas. Judging from some phenomena, such as its debut at the International Fantasy Film Festival in Canada, some foreigners were looking forward to the movie. Its movies, games, and other derivative works had also gained some popularity overseas. For example, the game Legend of Wukong had 150,000 likes from foreign netizens and had more than 3.13 million views on IG on Youtube. This showed that foreigners had a higher acceptance of Legend of Wukong. They recognized the visual effects and story content of this work. However, foreigners from different cultural backgrounds might have different understandings of Legend of Wukong. Some people might only be attracted by the wonderful pictures, unique characters (such as the plot of Sun Wukong fighting against the gods and Buddhas), and the unique story structure. As for some of the deeper thinking content with China cultural characteristics such as "belief", their understanding might be limited. Not satisfied with the game? You can read the novel related to Black Myth: Wukong to understand the exciting plot!

1 answer
2026-06-22 06:02

Abnormal reaction after inserting mp3 player into computer

The abnormal reaction after inserting the MP3 into the computer may be caused by the following situations: ** 1. In terms of hardware connection ** 1. ** Data line malfunction ** - The USB interface usually consisted of four wires, of which the red wire was used for power supply, the white and green wires were used for data transmission, and the black wire was used for ground connection. If the white or green wires were damaged or broken, it would cause the connection to the computer to be lost. At this time, you can try to replace the USB data cable with a new one and plug it into the interface at the back of the host to test whether it can be successfully connected. 2. **MP3 Device USB Interface Problem ** - For example, if there were problems such as weak welding during use, it would also lead to the inability to connect to the computer correctly. If there was still no response after the data cable was replaced, it could be considered that the USB interface of the MP3 device was faulty. In this case, it might be necessary to seek the help of a professional for repair. ** 2. Software ** 1. ** Driver problem ** - If the driver is not installed correctly or is outdated, the device may not be recognized and connected to the computer normally. You can try to update the MP3 device's hardware or driver to ensure that it is compatible with the operating system. You could also try to unmount the mp3 driver and format it with the software on the mp3 disc. In addition, you can also check if the computer is missing a USB drive. If there are many MP3s, it may be that the USB drive is not installed. You can reload the driver. There were usually multiple USB ports on the computer, so he could try inserting the MP3 player into another port. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-06 14:42

What if the computer's reaction is slow and keeps spinning?

The slow response of the computer could be caused by hardware failures, software conflicts, or boot settings problems. ** 1. Problems with hardware and solutions ** 1. ** Hard Disk Failure ** - Check whether the hard disk is damaged or not. Check whether there is any physical damage on the appearance of the hard disk, such as whether there are any traces of bumps. - Check whether the hard disk cable connection is loose. You can open the case to check whether the hard disk data cable and power cable are plugged in tightly. If the hard drive is faulty, it may need to be replaced. 2. ** Memory problem ** - Check if the memory stick is installed correctly. Open the case and check if the memory stick is inserted into the corresponding slot and installed firmly. - To ensure that the memory stick is compatible with the main board, you can check the instruction manual of the main board or check the memory compatibility list corresponding to the main board model. If there is a problem, you can try to plug in the memory stick again to ensure that the connection is good. 3. ** Video Card Problem ** - Check whether the graphics card is installed correctly and make sure that the graphics card is fully inserted into the corresponding slot. - Confirm that the connection between the graphics card and the monitor is good, and check whether the connection between the graphics card interface and the monitor interface is tight. If there is a problem, you can update the graphics driver or replace the graphics card. ** 2. Software problems and solutions ** 1. ** Operating system error ** - Try to start the computer in safe mode and run the repair tools that come with the system, such as System Restore or Repair Kits. Different operating systems may have different ways to enter safe mode. For example, in the Windows system, press F8 or Shift+F8 (some versions) when starting up. 2. ** Driver conflict ** - Update or dismount the conflicting driver. You can check the driver status of each device through the device manager. For problematic drivers, you can right-click to choose to update the driver or uninstall and then re-install. Make sure that all drivers are the latest version. You can download the latest drivers from the device manufacturer's official website. 3. ** Virus or Malware Infected ** - Run a comprehensive scan with trusted anti-virus software, such as 360 Anti-Virus, Kaspersky, etc., to remove potential viruses or malicious software. ** 3. Problems and solutions to boot settings ** 1. **Bios setting error ** - Different computers had different ways to enter the computer's BIOS settings. The most common way was to press the Del, F2, and other keys when turning on the computer. Check the boot options after entering the BIOS and make sure they are properly equipped. 2. ** Activation sequence setting error ** - Check the boot sequence settings to ensure that the hard disk or device on which the operating system resides is correctly identified and placed first. He adjusted the boot sequence in the boot options of the BIOS. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-08 01:04
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z