webnovel
The backhand technique of the horizontal racket

The backhand technique of the horizontal racket

2026-11-20 09:33
1 answer

There are many types of backhand techniques. The following is a detailed explanation: ** 1. Quick Backhand ** This was a technique commonly used by shake-hand-grip attacking athletes, and it was one of the foundations of backhand techniques. ** 2. Pull the ball in the middle ** 1. significance - It was a very core technique of the horizontal backhand, including the penhold backhand. 2. technical requirements - Standing position: about one meter away from the stage or even further away, feet parallel or left foot slightly forward. - Lead the racket to the left side of the abdomen. - Plate shape: You have to press the plate shape. - Elbows: Support outwards. When hitting the ball, you should look for the early stage of the fall. When you swing the racket, you should have the feeling of facing forward first. Your wrist, the inner side of your thumb, and your three or four fingers should work together. At the beginning of the practice, it is recommended to pull the diagonal line first, because the left side of the racket is more conducive to the right side of the force. If you pull the straight line at the beginning, it is difficult to experience the feeling of the right side of the waist. It is easy to make mistakes and dare not exert force. ** 3. Backhand Defense (Against Topspin)** 1. Target Groups and Purposes - It was more practical for adult players. You can do it after you are familiar with the backhand. 2. technical requirements - The position of the forearm lead was higher. Using the "master position's downward pressure" to catch the loop ball, he could hit the ball at the highest point. As his ability improved, he would have to be able to deal with more and more topspin balls, or even balls that were more spinning than ordinary loop balls. ** 4. Backhand Backspin and Backhand Rubbing ** 1. The characteristics of the lead shot - These two techniques were slow to take the lead and were the key steps to establishing an active force. 2. Pulling Backspin Technique Requirements - At the beginning, he had to find the drop point of the ball, and he had to pull the ball toward his belly button or slightly to the left, looking for the feeling of kicking his legs and hitting his crotch in one go. After pulling the ball down to pass the test, he could practice the combination of rubbing and pulling. ** Five, Quick Backhand Arching ** 1. technical feature - It was a quick dial that added friction to the table. 2. technical requirements - When the starting position was lower than the quick dial, the board would light up and tilt slightly forward. The impact would be in front and the friction would be behind. In a stalemate, the player can take the initiative to add force and spin, which helps to establish the feeling of the wrist, arm, and fingers exerting force together when hitting the ball. ** 6. Backhand Loop Drive with a Shakehand Grip ** 1. basic motion - The racquet was guided downward from the preparation position to the inner thigh, and the center of gravity of the body dropped accordingly. The right shoulder sank, and the elbow joint was slightly pushed forward. 2. hitting timing - In the early or high point of the incoming ball, swing the racket upward and forward. Use the elbow joint as the force point to drive the forearm to swing outward. You must give full play to the rotation of the wrist and swing the arm quickly. ** Seven, backhand ball ** This was the basic skill to deal with short backspin balls and needed to be mastered. ** 8. Backhand attack with a horizontal backhand ** The method of exerting force was to hit, similar to a bounce, which was more useful when dealing with half-high balls. Read more exciting novels for free

How to hold the racket with a backhand jump

When holding the racket to kill the ball with a backhand, the thumb must be clearly higher than the other four fingers. The palm must be hollow and the racket handle must not be gripped tightly. However, there was no information about the grip requirements of the Backhand Jump Kill. It was generally believed that the grip of the Backhand Jump Kill could follow the grip of the Backhand Kill. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-07 14:44

Horizontal bar backhand or forehand tired?

For most people, a pull-up might be more tiring. This was because the forearm pull-ups mainly relied on the strength of the back muscles, and ordinary people rarely used the back muscles in their daily lives, resulting in the lack of exercise of the back muscles. On the contrary, backhand pull-ups mainly relied on the strength of the arm, which was used more frequently in daily life. However, if one only practiced the forehand pull-ups and rarely practiced the backhand pull-ups, there might be a situation where one could do more forehand pull-ups but not many backhand pull-ups. This was caused by the difference in the amount of training. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-02 02:13

How can a table tennis racket match a horizontal racket?

The horizontal racket configuration required a combination of many factors. The following are some common situations: If it was a horizontal plate loop style, the forehand was not very stable but the force was good. The backhand was fierce and good, and the control of the ball was better. If you wanted to use carbon or fiber board, the loop style was more suitable for Dragon Five's bottom plate. Dragon Five's transformation was large and he held the ball for a long time. He pulled the loop ball and jumped forward. His acceleration was obvious and his strength was sufficient. Forehand can be matched with a D-style set or a 38-degree D-style set. The backhand has a good strength, so it is more suitable to use a 38-degree D-style set. The quality and penetration of the ball is much better than a 38-degree D-style set. If the backhand is good and uses a 37-degree D-style set, it may feel too penetrating and lack of strength. When choosing the base plate, the Galaxy series products were affordable, had a clear feel, and had a strong hitting force. In terms of rubber, the 729 rubber had a good price-performance ratio, such as the Galaxy U2 + Crazy Three 39 degrees + CJ8000 configuration for reference. In addition, if you take into account the pros and cons, it is recommended to choose Dragon 5x. For the forehand, you can choose Crazy Three. If you don't fill the oil, you can use the three-dimensional blue save (39 degrees); the backhand sticky set with 38 degrees of Dian Chi D, the astringent set can choose Gold V, 729 Flash, etc.(If you don't lack money, you can choose according to your own preferences, but you need to pay attention to your own play needs and budget to choose). While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-10-29 08:06

Backhand force table tennis racket recommendation

The following are some recommendations for table tennis bats that are suitable for backhand exertion: - ** Base plate **: The document does not mention the recommended base plate for backhand force, so it is impossible to give an accurate description. - ** Sealing **: - If you want speed and a soft feel, those who have used F1 before can consider the Donik F1 Plus. The sponge is more solid and elastic. If you want something harder, more solid, and better friction than F1, you can choose Platinum JO, which is suitable for players with good backhand strength. - Also good for shooting and defense was the Traveling Speed, which was suitable for players who had good backhand strength and hoped to shoot and defend well. - The Galaxy Moon Speed Sleeve was suitable for backhand fast attacks and had excellent spinning and explosive performance. - The F1 in the Desto series was the signature rubber for shooting techniques, suitable for backhand shots. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-08 06:06

How to choose a backhand table tennis racket?

When choosing a table tennis racket with a backhand, the following aspects needed to be considered: ** 1. Choice of rubber ** 1. ** Speed Style ** - If you wanted to suppress your opponent with speed, you could consider the Donec F1 in the backhand rubber. It was more powerful and not expensive. However, its sponge support might not be enough. The speed of the rebound was slower than some rubber, and there might be a false shot. The Traveller Ventus Speed was a good alternative, and its performance was better than the Donik F1. - If you wanted to play a backhand with a stable speed or a comprehensive technical backhand that focused on the bounce, then the ILP was also a good choice. It had good control, and the ball was spun. The bounce speed was fast and durable. 2. ** Loop style of play ** - If the backhand was mainly a loop, some sets of rubber that were suitable for the forehand loop, such as Pukuang 3, were suitable for people with good backhand strength. In addition, there were also some sets of rubber to choose from, but one had to pay attention to whether the thickness and hardness of the sponge were suitable for their backhand technique. 3. ** Pellet style (backhand is pellet rubber)** - If it was a raw rubber play (like Ito Miho's), the thinner the rubber sponge, the weirder the ball would be, the more the arc would float, and the thicker the sponge, the faster the ball would be. When the raw rubber was backhanded, the "bounce" was its most lethal weapon. It had the characteristics of fast speed and heavy return. - The long rubber was in the counter-hand. If it was an offensive long rubber, the sponge would be thicker to increase the speed of the bounce. If it was a chopping play, the sponge would be thinner to be able to drain the power of the ball. The long rubber surface had long particles, so it basically did not take the opponent's rotation. After receiving the impact of the ball, the particles could buffer the force. - There were fewer players who played the positive glue method. There were small particles on the positive glue surface, and the attack speed was fast. The positive rubber could also be used for the backhand, but it was necessary to choose the appropriate sponge thickness and hardness according to the characteristics of his own play. ** 2. Selection of Base Plate ** 1. ** Loop Fast Attack Backhand (Combined Style)** - The loop fast attack style required the rotation and speed to be unified, and the combination of friction and lashing techniques was often used. For this method, the bottom plate could be made of a soft and elastic single-plank (about 1mm) or a thin (5.5 - 6.0mm) five-layer bottom plate. The straight board is generally about 85 grams, and the straight board covered with sponge rubber on both sides should be lighter; the horizontal board is less than 90 grams. In this way, he could ensure a good feel when hitting the ball, swing freely when hitting the ball quickly, and at the same time, ensure the rotation of the loop attack and the speed of the whip attack. 2. ** Quick attack backhand close to the table ** - A fast attack near the table requires a fast pace and a small range of action. In order to improve the explosive power and surprise of small movements, the weight of the penhold racket bottom plate covered with sponge rubber on one side could be about 95 grams, and the weight of the racket bottom plate covered with sponge rubber on both sides was generally less than 90 grams. In order to increase the speed of the ball, the fast attack players required the arc of the ball to be low and flat, and the hitting technique should be used more. Therefore, the bottom plate should feel more firm when hitting the ball. You can choose a seven-layer board or a thick bottom plate with a thickness of more than 6.5 millimeters. 3. ** Attacking and cutting combination backhand ** - The combination of attack and cutting techniques is comprehensive. To ensure the rotation of the chop and loop attack, you can choose reverse glue with better surface stickiness and slightly longer particles. In order to ensure good control of the chop and defense, you can choose a sponge with moderate thickness (1.5 - 2.0mm) and moderate softness and hardness (about 40 degrees). The matching base plate should be selected according to the overall weight, feel, and feedback of the ball. For example, the soft wood is suitable for the loop ball and the cutter. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-10 19:18

How to add a feint to a serve with a horizontal backhand

Take Phyrus for example. When he serves with a backhand, he can hook his arm to the upper right when the serve is down to the side to make a similar action of turning the serve up to the side. This is a fake action. The smaller the touch, the more confusing the opponent. When Ochalov served the backhand ball, sometimes his arm hooked to the upper right when he served the side ball was a fake move, and the movement was very small and difficult to judge. In addition, when the ball was not spun, it could imitate the action of the backspin ball by changing the way of contact. That is, the backspin ball rubbed the bottom of the ball, while the non-spin ball hit the ball with the racket surface. The contact point of the hit ball was in the upper half of the sweet area of the racket. After the collision, the racket surface made a fake action of turning down to create the illusion of the backspin ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-17 19:20

Table tennis service skills, horizontal racket

There were the following techniques for serving a horizontal racket: 1. ** Grip adjustment **: When spinning the ball on the side of the serve, the grip of the horizontal board should be changed. The index finger and thumb of the hand should be changed into a shape like an eight to grip the racket. This will make the fingers and wrists more flexible. 2. ** Key Points of Shooting **: - The shape of the racket gradually lit up during the process of leading the racket, and the wrist was slightly raised to increase the explosive power at the moment of contact with the ball. - Throwing the ball and leading the racket should be done at the same time. When leading the racket, pull back with your forearm. The point of contact with the ball should be as low as possible, about the same height as the net. - It is recommended to throw high when standing a little further away. 3. ** Batting Skills **: - When hitting the ball, you should grasp the position of the ball according to the different ball types. For example, the racket should be lower than the ball when the ball is topspun on the side of the serve and rub the ball up. When the ball was sprinted forward, the racket touched the middle of the ball slightly below, and the forearm pushed forward slightly to ensure that the ball had the power to spin and move forward. - When serving the ball, you must increase the speed of the swing at the moment of hitting the ball. The first point of contact should be close to the end line of the table, and the point should be the same height as the net or slightly lower than the net. When serving the short ball, the strength of the wrist should be greater than the strength of the forearm. The first point of contact should be on the table and not too close to the net. The serve action should be similar to that of the long ball. - For the left side upspin, the wrist should be retracted quickly at the moment of hitting the ball, and the racket should rub from the middle of the ball to the upper left. For the left side downspin, the racket should be tilted back, and the racket should rub from the lower middle of the ball to the lower left. - When the backhand serves the right side up (down) spin ball, the racket rubs from the middle of the ball to the upper right at the moment of hitting the ball, and the wrist has a hook action; when the backhand serves the right side spin ball, the racket face is tilted back, and the racket rubs from the middle and lower part of the ball to the right at the moment of hitting the ball. 4. ** Overall Requirement **: - Relax your movements. When you take the racket before the serve, you should relax your forearm, forearm, and wrist. When you touch the ball, your wrist should exert force. Don't exert force on your forearm and forearm to avoid stiffness and affect your wrist strength. - The throw must be stable, including the height of the throw and the path of the ball rising and falling after the throw. - The height of the ball contact point should be appropriate. The ball contact point should be lower when the long ball is served urgently, and the ball contact point should be higher when the short ball is served near the net. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-21 16:22

How to choose the size of the backhand table tennis racket?

Aiya, he chose the size of the table tennis bat that was biased towards the backhand. He had to talk about it properly. First of all, there are many size of table tennis bats. If you want to focus on the backhand, you have to consider the size of your hand and your grip habits. If the hand was small, then a size racket would be easier to control. It would be more flexible in the backhand, rubbing, pulling, and so on. If the hand was bigger, a size racket could provide a larger hitting area, which might be more advantageous when the backhand was exerted. However, this is not absolute. It depends on your own feelings. You can go to a table tennis equipment store and try it out. You can feel the difference in the backhand operation of different sizes of table tennis bats so that you can choose the most suitable size for your backhand. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-08 09:28

What are the technical essentials of the horizontal backhand side spin?

The technical essentials of the horizontal board backhand side spin were as follows: 1. ** Racquet Grip and Racquet Lead **: The grip method must be stable. After the ball is thrown, the racquet should be led to the left and back through the waist (using the right hand as an example). When leading, the racquet face should be slightly tilted. 2. ** Racquet face angle **: When touching the ball, the racket face is basically maintained at about 80°. After touching the ball, the racket face is basically vertical to the ground. This can reduce the creation of backspin or topspin. 3. ** Power Method **: - He used his waist and hip to drive his arm to exert force, and his wrist remained relaxed when he hit the ball. - Using the elbow joint as a support to drive the entire arm to exert force, the direction of force was more from left to right (using the right hand as an example) to rub the ball, reducing the upward or downward force. - The waist and hip could move the arm to use the elbow joint as a pivot to rub horizontally. It could also pull the elbow horizontally to the left to lengthen the friction space. 4. ** Hit Point **: Try to hit the ball at the same height or slightly lower than the net. This will help control the arc. 5. ** Overall Movement **: The overall movement must be coordinated and must pay attention to the confusion of the movement. It can be used with the side up and side down serve. The threat of serving a long ball with a side spin is greater, and it is generally less likely to serve a short ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-17 16:38

The Technique of Backhand Backhand Cross Plate Receiving Side Spinning

There were the following techniques for catching a backhand side spin with a horizontal board: 1. In terms of preparation posture and wrist movements, when standing, keep your body stable, hold the racket in your hand, and lean your wrist slightly back so that the racket is vertical to the ground. 2. Pay attention to the angle of the racket and adjust it according to the opponent's serve, because the angle of the racket determines the trajectory of the ball and the strength of the spin. 3. When hitting the ball, the force point can be chosen at the lower part or the lower front of the ball, so as to obtain more rotation and power. 4. For the backhand side-spin joint, one must pay attention to the flexible movement of the wrist. 5. You can use backhand to flick, flick, and pick a straight line. You can also use backhand to stab the right side of the ball. The racket was relatively high, so there was no need to hold hands. During the ascent, he relied on his body to drive his forearm and control the arc forward and down. 6. When rubbing the ball, you need to find the center line of the side spin. If the center line is close to the normal line of the racquet surface when in contact with the ball, the side spin will not work. If the rubbing speed is enough, the above requirements may not be so strict, but the premise is that the ability to rub and spin is much stronger than the opponent. 7. You can also use a fixed plate to push, but this method is more limited, generally affected by side spin, but the ball's landing point is not very particular, sometimes it can use rotation to produce unexpected effects. 8. One must have a clear understanding of the rotation of the serve, determine whether the ball is left or right, and determine the direction of the ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-16 15:15
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z