webnovel
After the computer is turned on, it always starts up repeatedly, interrupting the boot

After the computer is turned on, it always starts up repeatedly, interrupting the boot

2026-11-20 18:10
1 answer

There were many reasons why a computer's main body repeatedly started up and was interrupted. 1. ** Power-related issues ** - Unstable power cord connection: Check whether the power cord is firmly plugged into the power outlet and the power interface of the computer host. - Power supply failure: If it is a power supply problem, you may need to directly replace the power supply. - Motherboard does not supply power to the CPU: In this case, the main board or power supply should be checked, but power failure is relatively rare. 2. ** Hardwares related issues ** - Memory Bank Failure: Memory Bank is an important part of the computer's operating memory. You can try to plug and insert the memory bank again. - Motherboard problem: You can try to discharge the power of the motherboards. - Video card contact failure: If the monitor has no signal output, it may be a video card contact failure. Generally, the video card compatibility is not good or it is not plugged in tightly. It can be unplugged and replugged. - hard disk problem - The hard disk mode was incorrect, so he could change it back to the correct mode. - The hard drive has been changed. You can enter the system by uninstalling the newly installed drive, and then install the official drive. - If the system in the hard drive was damaged, the power supply could be replaced or the system could be reinstalled according to the actual situation. - Computer built-in battery problem: If the 3V button battery on the computer's main board is dead or damaged (for example, the computer has not been used for a long time, and the built-in battery is exhausted), it may cause the computer's storage system to be chaotic, and there will be abnormal boot situations. This battery is not a recharged battery, and the more it is consumed, the less it will be. It needs to be replaced when necessary. 3. ** Software-related issues ** - Missing runtimes: If you are running some programs (such as games), there is a repeated boot interruption, especially after reinstalling the system, it may be that the computer lacks the necessary runtimes. - Driver or software conflict: A conflicting driver or software may cause the host computer to fail to start normally. You can check and deal with the conflicting driver or software. - Incompatible programs or problems with the automatic updates of the Windows: If the program is incompatible or the problem is caused by the automatic updates of the Windows, you can uninstall the patch since the problem occurred in the control panel. If none of the above methods can solve the problem, you can try to enter safe mode or use the system recovery option. Read more exciting novels for free

After Transmigrating, the Fat Wife Made a Comeback!

After Transmigrating, the Fat Wife Made a Comeback!

Qiao Mei transmigrated into a novel as a supporting character with the same name as her who lacked presence. This supporting character was a country bumpkin who couldn’t get married due to her obesity. According to the original script, this country girl Qiao Mei was a fatty spoiled by her grandfather. However, their relatives were all vicious and cruel people. Her grandfather had poor health, so once he died, the relatives would divide and swallow up his assets. Hence, her grandfather’s greatest wish was to marry Qiao Mei off. For this, even sacrificed and betrayed his good friend’s grandson, Xia Zhe. Grandpa got Xia Zhe drunk and had Qiao Mei forcibly take the strong and handsome Xia Zhe with her body which weighed more than two hundred pounds. Then, grandpa would catch them the next day and force Xia Zhe to marry Qiao Mei. However, that eventually caused the start of Qiao Mei’s unfortunate life. Also, in the original story, Qiao Mei took possession of Xia Zhe’s mysterious jade. But due to Qiao Mei’s stupidity, her cousin's sister had tricked Qiao Mei into giving her the jade, which resulted in the cousin’s family becoming rich. When Qiao Mei transmigrated here, it was during the awkward moment when she was making love to the man after making him drunk. She woke up groggily the next day and grandpa’s team had already appeared at the door. Qiao Mei was frightened. She didn’t want to proceed on the original path and marry a man who didn’t love her. And so, she lied and chased grandpa away. She also pushed the man out before forcing herself to look at her tanned and chubby reflection in the mirror! Alas, she cried at her ugly appearance… Like a sumo wrestler in large cloth underwear, even the plus-sized apparel shops didn’t have clothes in her size. And her face was the size of a pizza, a scorched pizza! Qiao Mei decided to reform her life! The first step, lose weight! The second step, clean up her room! She used to be particular about cleanliness, and although her current house had a huge courtyard, she could only describe it as messy! The third step was to hold onto the jade tightly so her greedy cousin wouldn’t stand a chance! Only, wasn’t the tall and handsome Xia Zhe supposed to hate her according to the original story? Why was he being nicer and nicer to her?
Urban
2450 Chs

The computer was turned on and restarted repeatedly. There was a sound from the power supply.

The computer repeatedly reboots and the power source has a sound, which may be caused by many reasons: ** 1. Hardwares ** 1. ** hardware connection problem ** - It could be that the internal hardware connection of the computer was loose, such as the connection between the memory stick, hard disk, graphics card, and other devices to the motherboards. In this case, the computer might restart repeatedly during the power-on self-test because it could not detect certain hardware or hardware communication abnormalities. He needed to open the case and plug in the memory stick, hard disk data cable, power cable, graphics card (if it was a standalone graphics card), and other hardware to ensure that the connection was secure. 2. ** hardware malfunction ** - ** Power Failure **: Although there is a sound indicating that the power is being supplied, there may be insufficient power or an internal circuit failure. The nominal power of the power supply may not be able to meet the actual needs of the computer hardware, resulting in unstable power supply, causing the computer to restart repeatedly. For example, if the internal components of the power supply, such as the power supply, were damaged, it might cause the output voltage to be unstable. You can try to replace a new power supply to check if it's a power supply problem. - ** Memory Failure **: If the memory is damaged, the computer may not be able to load data normally and restart repeatedly. Long-term use or exposure to static electricity, excessive heat, and other factors may damage the memory. - ** Hard Disk Failure **: When the hard disk has a bad track or other failures, it may cause system files to be read incorrectly, causing the computer to restart. The hard disk would perform a self-test when it was turned on. If a problem was found during the self-test, it might trigger the computer's restart mechanism. 3. ** Overheating problem ** - If the computer's CPU or graphics card had poor heat dissipation, it might trigger the hardware's thermal protection mechanism, causing the computer to restart repeatedly. After using the computer for a long time, the cooler might be blocked by dust, affecting the heat dissipation effect. For example, if the CPU cooler fan's speed was insufficient or stopped, it would cause the CPU temperature to rise rapidly. When it reached the protection temperature, the computer would automatically restart. The dust on the heat sink needed to be cleaned, and if necessary, the thermal grease or cooling fan needed to be replaced. 4. ** Bios-related issues ** - A dead battery on the main board could cause the loss of the BIOS settings, which could cause the computer to restart repeatedly. Bios settings play an important role in the computer's hardware initialisation and boot sequence. If the settings are lost, the computer may not be able to boot normally. In addition, there may be a problem with the BIOS program itself, and it is necessary to check if the BIOS can be updated to the latest version to solve the problem. 5. ** Membrane failure (for hard disk)** - An error in the Murong boot program would also cause the computer to restart. It was located in the first sector of the hard disk and stored important boot data. Once an error occurred, after the computer was turned on and the hardware was detected, the CPU would read the wrong Murong sector data when it accessed the hard disk data through the memory, causing it to be unable to boot normally and restart repeatedly. If you are familiar with hard disk partition tools such as Disk Genius, you can try to repair (reset) the hard disk's Murong sector. Otherwise, it is recommended to send it for after-sales maintenance to avoid data loss. ** 2. Software ** 1. ** System Failure ** - A computer system program error or crash could lead to repeated reboots. For example, if the system files were accidentally deleted, damaged, or the system update failed. You can try to enter safe mode (if you can) to repair or restore the system in safe mode. If the repair was ineffective, the system might need to be reinstalled, but it was important to back up important data. 2. ** Driver problem ** - The installation of incompatible drivers may cause communication problems between the hardware and the system, causing the computer to restart repeatedly. For example, the graphics card driver is not compatible with the system or other hardware after the update. You can uninstall the recently installed driver in Safe Mode and then re-install the correct version of the driver. 3. ** Virus or Trojans ** - A trojans or viruses on the computer could also cause problems such as blue screens, errors, garbled codes, and frequent reboots. Trojans could manipulate computers, steal information, and paralyze them. You can use anti-virus software or housekeeper software to scan and clean. If you can't turn on the computer or open the software normally, you can consider restoring the system or reinstalling the system. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-19 23:45

Xiaomi note 2 repeatedly shows the boot interface

If the Xiaomi note2 repeatedly displays the boot interface, you can try the following operations: First, pull out the battery and wait for about two minutes to reload the battery; Second, in the off state, press the "volume increase button" and "power off button" successively; Third, press the "power button" to select simplified Chinese, use the volume decrease button to select clear data, and then clear the "buffer data" and "clear user data" in turn. If these operations still cannot solve the problem, it is recommended to go to Xiaomi for after-sales treatment. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-18 23:44

What should I do if the computer is turned on and restarted repeatedly and there is a sound and a black screen?

There are many reasons why the computer repeatedly reboots and the black screen has a sound. The following are some investigations and solutions: ** 1. Hardwares ** 1. ** Connecting parts inspection ** - Make sure the host is powered up, check if the power cord is plugged in, and if the power supply is normal. - Check the connection between the host and the monitor, check if the data cable is loose or damaged, and check if the pin interface is bent. 2. ** Memory Bank Problem ** - After turning off the power, he opened the case, pulled out the memory stick, and gently wiped the golden finger part of the memory stick with an eraser to remove the possible oxygen layer. Then, he plugged it back in. If you have more than one memory stick, you can try inserting only one memory stick for the boot test, or you can try inserting the memory stick into other slots. Or use a new memory stick for testing. 3. ** Video Card Problem ** - If it was a standalone graphics card, pull it out, clean up the graphics card cheat and slot, and then plug it back in. At the same time, check whether the graphics card fan is running normally, whether there is any collision and friction between the graphics card and the power cord, and whether the heat dissipation of the graphics card is good. 4. ** Power supply problem ** - Check whether the power supply is working properly and whether the power supply can meet the needs of the computer hardware. You can try to change to a reliable power source for testing. 5. ** Motherboard problem ** - Check if the CPU's reset pin is plugged in properly. If the Floppy Drive and Hard Disk indicator lights do not light up when starting, the possibility of damage to the Motherboard is greater. In addition, check whether there are any abnormalities such as bumps on the components on the main board. 6. ** Overheating problem ** - Overheating inside the computer could also cause this situation. Check whether the CPU fan is running normally and clean the dust inside the computer, including the dust on the heat sink, fan blades, and other parts. If it was a laptop, it was also necessary to check if the heat sink was blocked. ** 2. Software ** 1. ** System Recovery ** - Try to enter the safe mode (press F8 and other keys after starting up, different computers may have different settings). If you can enter the safe mode, you can perform the system restore operation and choose the last correct configuration. 2. ** Virus Kill ** - Run anti-virus software in safe mode for a full scan to eliminate the possibility of virus or malicious software infection. 3. ** The operating system is damaged ** - If none of the above methods work, you may need to consider reinstalling the operating system. If you are not familiar with the reinstalling system, it is recommended to seek professional help. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-10 21:58

How to check the computer's boot time?

There were several ways to check the computer's boot time. One way was to check through the mission manager. Right-click on the task bar, select " Start Task Manager ", and then click on the " Performance " tab in the task manager. You can see the computer's boot time. Another way was to check through the command prompt. Press the " Windows+R " key combination, enter the " cm d " command, and then enter the " systeminfo " command on the command prompt interface to see the computer boot time. These methods can help you accurately check the computer's boot time.

1 answer
2024-12-24 23:47

Why is the computer not turned on?

There could be many reasons why a computer could not be turned on. First of all, the connection problem of the power cable may cause the computer to not turn on. Make sure that the power cord is tightly connected to the main board, and the power supply to the processor and the main board must also be properly connected. Secondly, the state of the power switch might also affect the computer's boot. Make sure the power switch is in the correct position. In addition, improper installation of the cooler could also cause the computer to fail to boot. Be careful not to be too loose or too tight when installing the heat sink. In addition, the computer may encounter problems such as CPU overheating, core hardware failure, or insufficient power supply, causing it to fail to boot. For these problems, you can try to clean the dust inside the CPU cooler and the case, and then try to power it up again after adding some silicon grease. If it was a core hardware failure, the relevant hardware might need to be replaced. If the power supply is insufficient, you can consider replacing the power supply. For Apple computers that could not be turned on, it could be caused by power problems, hardware failures, system problems, or other external factors. First of all, he had to check if the power supply was working properly, and then check for other possible reasons. In short, there could be many reasons why the computer could not be turned on. It needed to be investigated and resolved according to the specific situation.

1 answer
2024-12-24 19:30

Is it harmful to the computer to repeatedly open a software?

Often opening a software repeatedly would cause some damage to the computer, mainly in the form of the hard disk and memory loss every time the software was loaded, but this effect was relatively small. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-06-29 21:34

How to solve the video problem when the computer is turned off and restarted repeatedly when playing games

Here are some solutions to the problem of repeatedly shutting down and reboots when playing games: 1. ** System repair ** - If the system or programs are incompatible, you can turn on the computer and press F8, select "Last Correct configuration" and enter to repair it. If it doesn't work, press F8 to enter safe mode to restore the system or reload the system. - For the Win10 system, you can right-click and then click on the properties to find the advanced system settings on the right. After clicking on it, in the settings of the boot and fault recovery in the advanced, remove the tick before the "automatic restart" in the system failure, and then press OK and apply to restart the computer. He could also click on other power settings in Power and Sleep on the left, and on the right, he could click on the Balance Change Setting Plan, change the advanced power settings, restore the default settings of the plan, and save it. In addition, in the function of selecting the power button, he clicked to change the currently unavailable settings. When he pressed the power button, he chose to sleep or shut down (only these two options were selected) and save the changes. 2. ** In terms of hardware ** - Check whether the CPU or other hardware temperature is too high, whether there is any incompatibility or malfunction in the memory and graphics card. If the CPU and graphics card were too hot, it would often cause a protective automatic restart. The fan could be cleaned, oiled, or replaced with a new fan. - Check whether the hard disk has bad channels, use the system's own function or software to repair the disk, or format the hard disk, repartition, and reload the system. - Considering the factors of power failure and voltage instability, when running large-scale games and other software that takes up a large amount of CPU resources, the CPU needs a high-power supply. If the power supply is insufficient and overloaded, it will cause a power protection and restart. At this time, it can be replaced with a high-quality high-power supply. In addition, check whether the CPU's cooler fan is working properly and whether the bottom of the cooler is tightly connected to the CPU. 3. ** Other aspects ** - If you suspect that it is caused by a virus or trojans, you can use relevant anti-virus software (such as the system repair function of Kingsoft Internet Security Treasure Chest) to clean up the virus. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-18 22:11

Why is the third young master of the Tang family always interrupting lately?

The third young master of the Tang family had recently broken off because he had been writing for 20 years in a row. He was very tired and needed to adjust himself. Before this, the only time he broke off was because of his wife's death. In his reply, he said that he had been sick for almost a month after writing the Divine Print 2. He really felt that he was old and needed to rest. He promised that he would tell everyone the news of his return as soon as he adjusted. Regarding the rumors of remarriage, he denied these rumors and said that he had always lived with his parents and parents-in-law to accompany his children growing up. If he remarried, he would inform his readers.

1 answer
2024-12-25 20:44

Why is the third young master of the Tang family always interrupting lately?

The Tang family's Third Young Master had stopped recently because he felt tired and needed rest and adjustment. In his post, he said that he had been writing for 20 years and had been sick for a month after writing the Divine Print 2. He also responded to the doubts about the rumors of remarriage, saying that he had always lived with his parents and parents-in-law, accompanied the children to grow up, and would inform the book friends if he remarried. As for the specific time of the pause, the search results did not mention it, so he could not answer.

1 answer
2024-12-24 22:07

The child always pees blood repeatedly

Children who repeatedly urinate and hide blood may be caused by many factors. First, urine tract infection If the child did not pay attention to local hygiene, it was easy to cause urine tract infection, such as ureteritis, cystitis and other diseases, which may cause the urine test to always have occult blood. Second, kidney function damage 1. Disease such as chronic glomerulonepathy, IgA kidney disease, purpuric kidney disease, etc. may cause damage to kidney function, resulting in the phenomenon of occult blood in urine tests. 2. In children who are recovering from purpuric hemorrhoid, hematuria may last for a long time and easily worsen. However, simple hematuria itself was not harmful to the child, but if the child with purpuric glomerulonetis usually had hematuria under the microscope, and after infection, there was always gross hematuria or urine protein, it indicated that the kidney condition was more serious and there might be changes in kidney function. 3. Children with Henoch-Schonpes often had urine occult blood during urine tests. If the condition was not controlled in time, the kidney damage would worsen. It was necessary to use drugs to disable the pathogenic factors that caused the kidney inflammation and repair the damaged glomerular filtering membrane at the same time. Moreover, the primary disease of Henoch-Schonpes should be treated to prevent its repeated episodes from worsening the symptoms of urine occult blood or making it difficult to cure. In addition, if the child's urine test had less than +3 occult blood, he generally did not need further special treatment, but he needed to be rechecked regularly. If it was urine occult blood 3+ and urine protein negative, it was necessary to first determine whether it was hemuria (under the microscope, if the number of red blood cells exceeded 3 per high-power field, it was hemuria). If it was hemuria, then identify the source of red blood cells. More than 60% of the red blood cells were normal red blood cells, which meant that they might come from outside the kidney, such as kidney stones, urine tract infection, etc.; More than 60% of the red blood cells were abnormal red blood cells, which meant that they might come from the kidney. If it was glomerular hematuria but no proteinuria, it was usually seen in latent glomerulonepathy, nutcrackers, or familial thin basement membrane kidney disease. These conditions were generally not harmful and usually did not need treatment. Regular reexaminations were enough. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-11 22:25
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z