webnovel
How to spin a table tennis ball

How to spin a table tennis ball

2026-11-22 15:18
1 answer

There are several common types of spinning balls in table tennis and their serving methods: * * 1. Topspin ** 1. * * Grip and stance ** - There were two ways to hold the racket: penhold and shake-hand. The shake-hand method was to hold the palm of the hand close to the table tennis racket. The index finger was in front of the racket, the thumb was behind the racket, and the other three fingers held the racket handle. When attacking the ball with the forehand, the index finger moved up. The standing position was about 50 cm away from the table tennis table (in case of attack). 2. * * Serves ** - Throw the table tennis ball up and hit the top of the table tennis ball with the racket, rubbing the upper and middle parts of the table tennis ball. The contact point between the racket and the table tennis ball should be the same height as the net, and the table tennis ball should be close to the bottom line. * * 2. Backspin ** 1. * * Key Points of Grip ** - The hand grip held the shoulder of the racket, allowing the wrist to rotate freely to increase friction and rotation. 2. * * Serves ** - The table tennis ball was thrown up, and the table tennis racket was hit hard to the middle and lower part of the table tennis ball. The point of friction with the ball should be the same height as the net. When hitting the ball, the table tennis ball should fall to the height of the waist. At the same time, the waist should rotate to drive the rotation of the ball, contact the bottom of the friction ball, and make the table tennis ball stay on the rubber. The head of the table tennis racket first touched the friction. The longer the friction accelerated, the stronger the rotation. * * 3. Right side up-and-down spin (reverse spin serve)** 1. * * Simple actions ** - The moment he threw the ball, he directly pulled the ball into his arms, pointing his elbow to the outside of his body. The moment he released the ball, his elbow leaned against his body, and his hand made an outward movement. He had to reduce the impact on the ball as much as possible and accelerate in the direction of the racket to increase the friction effect. During practice, it was best to start with a long ball, close to the baseline. The shot should be fast and sudden, and then exert force. At the same time, the force should be applied with the center of gravity brake. The contact point of the ball should not be too high. After practicing, he lowered and shortened the arc. 2. * * Key points of right topspin serve ** - It mainly used the movement of the body, with the elbow as the pivot, the arm swinging like a pendulum, and the instantaneous explosive force of the wrist. When doing a right side topspin, touch the right side of the ball and pull it forward. 3. * * Key points of right side backspin serve ** - When you do a right side backspin, touch the right side of the ball and rub it forward and downward. * * Four, serve with a left spin ** 1. * * Position ** - Generally, the serve is served with a left hand spin, and the position is close to the left side of the table. 2. * * Action ** - When taking the racket, move your wrist with your belt and turn your waist slightly to the right to extend your wrist. When the ping pong ball fell to the chest, the head of the right hand holding the racket had to stand up diagonally to the right. The moment he touched the ball, he increased the friction. The wrist holding the clap was appropriately retracted, and the left side of the ball was rubbed in front of him. At this time, the racket was in a vertical position. When he made his move, his elbow felt like it was slightly extended, and his wrist and fingers instantly exerted force to accelerate the friction on the left side of the ball. - If he wanted to serve a left-side backspin ball, he needed to let the table tennis ball touch the ten o'clock direction of the racket and rub it to the bottom left. If he wanted to serve a left-side topspin ball, when the table tennis ball touched the ten o'clock direction of the racket, he needed to rub it to the top left and do a lifting and hooking action. * * 5. Hook serve ** 1. * * Hook, side spin ** - He let the table tennis ball touch the two o'clock direction of the racket, touch the bottom right side of the ball, and rub it from the bottom right to the top left. The moment the friction happened, his wrist swung forward and upward. 2. * * Hook hair, side spin down ** - At the 10 o'clock direction of the contact racket, rub the lower right side of the ball from the lower right to the upper left. After rubbing, you can add an upward lift feint to make the side up and side down movements similar, increasing the confusion. In addition, there were some common points to pay attention to when serving the spin ball: 1. In terms of center of gravity, - The center of gravity had to be lowered so that the ball could return to its original position quickly after the serve and ensure that the arc of the ball was flat. 2. In terms of positioning, - They had to stand close to the shore and the table. Their thighs had to be at the corners of the table tennis table, with one foot in front and one foot behind. 3. When the ball swings - The hand should be loose, the grip should be three fingers tight, the arm should be tightly clamped, the swing radius should be about 90 °, the racket should be tilted back, and the friction should be thin. The moment the ball was thrown, the body turned 90 °, the wrist extended, the plate leaned back, the forearm opened to 90 °, then the center of gravity changed from the bottom foot, the waist turned, the forearm retracted 90 °, then the wrist, the fingers, and finally stopped. When serving a "no-spin" ball, you can use the top edge of the racket to touch the ball. The action is similar to serving a spin ball to confuse the opponent. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

How Did I Become an F1 Driver?

How Did I Become an F1 Driver?

How did I become an F1 driver? Qin Miao discovered that he had the talent to become a top e-sports driver. Just during the college entrance examination period, he played with the simulator in his spare time and was surprised to find that he had the ability to compete with other professional e-sports drivers. You should know that he just played casually and had this ability. If he settled down to practice, Qin Miao would definitely have a bright future on the road of e-sports drivers. Qin Miao was ready to take the path of an e-sports driver if he failed the college entrance examination. But on a very ordinary day, Qin Miao gained a system. However, Qin Miao was still sensible. Even if he got the system, it was unlikely for him to become a formal F1 driver. Because when he got the system, he was already 19 years old and hadn't been exposed to anything related to racing before the age of 19. Two years later: Xiaozhou: There is no doubt that Qin Miao is a very talented driver, but I feel that racing is just a profession for him, his real hobby is live streaming and playing games. Lock: Qin? Just a second-generation Kimi. But then again, he plays CSGO really well, it was he who boosted my Earth. Old Man: Qin is a pure person, his life is only about racing... and video games. Dutch White-eyed Wolf: I have nothing to say about him. Bi Hai: If he spent half the time he uses to play games on the simulator, his achievements now would be far beyond this! Horner: I really appreciate Qin, he is a natural-born F1 driver and also a pure person, I very much hope he can join Red Bull and become one of us.
Sports
1619 Chs

How to spin a table tennis ball

The following are the key points of different spin balls: ** 1. Backspin ** 1. ** Rap Grip and Wrist **: Grip the shoulder of the racket with your hand, allowing your wrist to rotate freely to increase friction and rotation. 2. ** Rubbing part **: The bottom of the ball will be rubbed against the rubber, and the head of the racket will be rubbed against the rubber first. The longer the friction is accelerated, the stronger the rotation will be. 3. ** Hit height **: When hitting the ball, the ping pong ball should fall to the height of the waist, and at the same time, the waist should rotate to drive the ball. 4. ** Racquet angle **: When serving, the racket should lean back. The friction should be thin. The racket should be level with the table. From the lean back to the instant of shaking friction, it is difficult for the opponent to find the part where the racket touches the ball. ** 2. Side spin serve ** 1. ** Basic posture **: Stand up the table tennis racket and rub the side of the ball. 2. ** Side topspin serve **: After rubbing the side of the ball, the wrist will quickly lift up and rub it forward. After the ball falls, it will turn and arch, and the opponent will easily catch it. 3. ** Side Spinning Serve **: After rubbing the ball, rub it forward and downward. The head of the racket touches the table tennis ball first, and the serve will turn and sink. Pay attention to the rotation of your body when you serve. In addition, be careful not to hold hands. Don't stiffen your arms. Your body must sink. Use your body to drive your wrist to exert force and friction. Your fingers will instantly accelerate. ** 3. Left-hand spin serve (Usually, a left-hand spin serve is used with a forearm)** 1. ** Standing position **: Stand close to the left side of the table. 2. ** Ripping action **: When you are pulling the racket, move your wrist with your belt and turn your waist slightly to the right and back to extend your wrist. When the ping pong ball fell to the chest, the head of the right hand holding the racket had to stand up diagonally to the right. 3. ** Ball touch action **: The moment you touch the ball, apply more force to rub it. The wrist holding the clap should be retracted appropriately, and the left side of the ball should be rubbed to the side. At this time, the clap is in a vertical position. When he made his move, his elbow felt like it was slightly extended, and his wrist and fingers instantly exerted force to accelerate the friction on the left side of the ball. 4. ** Subdivision ** - [Left Backspin Ball]: When the table tennis ball touches the 10 o'clock direction of the racket and rubs to the bottom left, the opponent's return ball will easily fall into the net. If the rotation is not judged well, it will also easily suffer from side spin, causing the ball to fly out of the table to the left. - ** Left Topspin **: When the table tennis ball comes into contact with the racket in the ten o'clock direction, rub it to the upper left and do a wrist hook action. The opponent will easily go out of bounds or jump high when receiving the ball. ** 4. Right Spinning Serve (Reverse Spinning Serve)** 1. ** Simple action **: The moment you throw the ball, you should directly pull the ball to your chest, point your elbow to the outside of your body, and when you release the ball, you should lean your elbow to your body and raise your hand to simplify the complexity of the action. You can fully experience the feeling of reverse rotation friction. He had to reduce the impact on the ball as much as possible and accelerate in the direction of the racket to increase the friction effect. During practice, it was best to start with a long ball, close to the baseline. The shot should be fast and sudden, and then exert force. At the same time, the force should be applied with the center of gravity brake. The contact point of the ball should not be too high. After practicing, he lowered and shortened the arc. 2. [Main points of action: Mainly use the body to move, with the elbow as the pivot point, the arm swings like a pendulum, plus the instantaneous explosive force of the wrist.] 3. ** Right side topspin **: Touch the right side of the ball and pull it forward and upward. 4. ** Right Side Downspin **: Contact the right side of the ball and rub it forward and downward. ** 5. Hook serve ** 1. [Hook Shot Side Upspin]: Let the ping pong ball touch the two o'clock direction of the racket, touch the lower right side of the ball, and rub from the lower right to the upper left. The moment the friction occurs, the wrist will swing forward and upward. 2. ** Hook hand side spin **: Touch the 10 o'clock direction of the racket, rub the lower right side of the ball, from the lower right to the upper left. After rubbing, you can add a fake action of lifting up, so that the action of the side up and side down is similar, increasing the confusion. In addition, it was also important to maintain a good standing posture when serving. The center of the body was stable, the upper body was relaxed, and the feet were naturally separated, shoulder width. According to the incoming ball, the position should be flexibly adjusted. The serve was mainly to use the wrist and forearm strength. The strength should be skillfully used, and the wrist shake should be gentle. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-08-26 19:36

The table tennis ball receives the ball with a backhand spin

There were many situations and techniques to deal with the backhand spin in table tennis: * * 1. Catch the left side spin ball ** When the opponent serves a left-hand spin (the left side of the ball will produce a strong left-hand spin, and the ball will turn to the left side of the body), you should quickly step forward, decisively cut to the right side of the ball and step forward, and press down at the same time. * * 2. Receiving the right spin (reverse spin serve)** 1. Backhand Catch: Quickly step forward and cut the left side of the incoming ball. Pay attention to rubbing the ball and press your body down. 2. Forehand Connection: After stepping forward, rub the left side of the incoming ball. The racket should be open to better rub the left side of the incoming ball. * * 3. Receiving Backspin (Spinning serve)** After taking a step forward, he placed the racket flat, rubbed the bottom of the incoming ball, and sent it forward. For the backhand catch, he would also put the racket flat after taking a step forward, quickly rub the bottom of the incoming ball, and take the initiative to rotate and rub the ball out. In addition, the backhand twist and pull technique could also be used to catch the ball. The twisting and pulling was mainly applicable to the short ball sent by the other party (the ball that could not be released after the second jump). If the incoming ball has a strong side spin or back spin, it's best to touch the side of the ball (side twist); if it's a topspin or no spin, you can twist the ball directly (forward twist). The purpose of the side twist was to offset the side spin and downspin of the incoming ball. For example, when the ball was purely downspin, the racket had to stand up and touch the left side of the ball to offset the downspin. The forward twist required a high amount of strength from the fingers and wrists. It was easier for amateur players to pull the downspin ball over the net by using the side twist. There are many points to pay attention to when twisting and pulling, such as stepping on time.(When judging a short ball, take a small step with your left foot first, and then follow the table with your right foot), raise your arm (Create space for forearm and wrist to retract), Elbow forward (Draw a circle with the elbow as the center and no longer lift the arm up), wrist hook (According to the speed of the incoming ball and the situation of the step, the more the inner hook is, the more power it will exert), a large forward (after touching the ball, you have to exert force forward and experience the action of stepping on the ground and pushing forward), the racket face adjustment (the back spin racket face stands up, the top spin ball presses the racket face), and the use of the racket head to hit the ball (the upper arm is raised, the elbow is pressed against the joint, and the wrist is hooked, it is easy to realize the racket head contact with the ball, and the power will be more sufficient), and finally the instantaneous power (the previous action is relaxed, and the power is released instantly). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-11-11 13:33

Table tennis teaching video side spin ball

The following are some teaching points about table tennis side spin: ** 1. Principle of side spin ball ** When hitting the ball, the racket is swung parallel from the back to the inside (also known as a "slide"), and the ball produces a side-spin from the outside to the inside. The ball flew in a horizontal arc and jumped out after landing. In reality, the rotation of the ball is affected by many factors, such as the direction of the ball, the strength, the speed of rotation, the swing route when hitting the ball, and the angle of the racket when touching the ball. ** 2. Serves the ball ** 1. ** Get ready for action ** - When standing in the backhand position to serve with the forehand, the body was basically at a right angle to the end of the table, leaving space for power storage and transmission. Regardless of whether it was a straight or horizontal board, one had to fully relax before serving, especially the wrist. At the same time, the fingers had to hold the racket tightly. 2. ** Force mechanism ** - The strength was transmitted from the waist to the arms, then to the wrists and fingers, similar to the mechanism of attacking and pulling the ball. To serve, the ball must be thrown up nearly vertically. The ball has an acceleration when it falls. The racket and the ball must meet in the right position (generally, the best hitting point is slightly above the table in front of the chest) to produce a greater force. When you serve, you have to press down to control the height of the ball's arc. 3. ** Different Spinning Serves ** - ** Left topspin (clockwise rotation)**: When hitting the ball, the racket will stand up slightly and press against the side or lower part of the ball. The moment the ball touches the ball, it will give the ball a forward and upward impact force. After landing on the table, it will deflect to the left half of the opponent's table. - ** Left Side Downspin **: The racket is slightly extended (the wrist is slightly turned out), and the lower part or bottom of the ball is rubbed against it. There must be a hook movement in the direction of the body. After landing on the table, it will deflect to the left half of the opponent's table and the ball will go down. ** 3. Key Points of Receiving Side Spinning ** 1. ** Left Spinning **: The racket face is vertical, and the middle part of the ball is slightly to the right. When pushing forward, rub from right to left (suitable for serving and rubbing the ball). 2. ** Right Spinning **: The racket face is vertical, and the middle of the ball is slightly to the left. When you push forward, rub from left to right. 3. ** Left Topspin **: The racquet face is vertical. When touching the ball, the upper part of the middle right side of the ball, rub it to the upper left side while pushing forward. 4. ** Left Downspin **: The racquet face is slightly tilted back, touching the lower right side of the ball and rubbing it to the lower left. 5. ** Right side topspin **: The racket face is vertical, the upper left side of the ball is touched, and the upper right side of the ball is rubbed. 6. ** Right Downspin **: The racquet face is slightly tilted back, and the ball is rubbed to the lower left of the middle of the ball and to the lower right. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-10-02 23:51

Table tennis spin serve

The spinning balls in table tennis serve mainly include the types of backspin, topspin, and sidespin balls. The following are their related points: ** 1. Backspin ** 1. ** Purpose of serve **: - Backspin was more common in service. By spinning in the opposite direction, the ball would easily fall down when the receiver touched the ball and cause it to fall into the net. It was a means to prevent the opponent from attacking. 2. ** Serve Method **: - The server laid the board flat and rubbed the bottom of the ball horizontally to form a backspin ball. 3. ** Identification Method **: - One was to observe whether the opponent rubbed the bottom of the ball and exerted force to move forward and down, and the other was to observe whether the ball would decelerate due to friction after falling off the stage. 4. ** Method of catching the ball **: - ** Rubbing the ball **: Regardless of the length of the backspin, you can use a similar action as your opponent. Place the racket flat and rub the bottom of the ball forward and downward. When the ball just bounced up, the plate shape was close to the vertical tabletop (about 80°), and the ball was chopped down. When the force was added to rub (splitting), the plate shape was close to the angle of 20°, and the forearm was bent and straightened forward. - ** Twisting and Pulling **: When the opponent's backspin ball is short and wants to attack, you can use twisting and pulling. The plate shape is slightly vertical and the contact with the side of the ball is better. - ** Pulling Rush **: When the opponent's serve is long and the ball is backspinning, the opponent can use full force to hit the ball. Pulling Rush is used. - ** Forehand pick **: The technique of attacking with a forehand in the ring. The racket is tilted back 45 - 60 degrees, and the arm is stretched into the ring from top to bottom to draw a V-shape. The forearm and wrist are mainly used to hit forward. When the ball enters the rubber, the wrist will rub forward. ** 2. Topspin (Topspin during service)** 1. ** Purpose of serve **: - The topspin ball in service has enough rotation, and the force is relatively small compared to the topspin ball in the pull. The purpose is to let the receiver receive the ball and bounce up high due to friction, causing the receiver to be passively beaten or directly fall to the ground and lose points. 2. ** Serve Method **: - The board stood up and rubbed against the side of the ball. His wrist accelerated forward and rubbed against it. ** 3. Side spin ** 1. ** Right spin serve (reverse spin serve)** - ** Action Points **: - The simplified action could be to directly pull the ball into the arms at the moment of throwing the ball. The elbow pointed to the outside of the body, and the elbow leaned against the body at the moment of the release, and the hand made an outward movement. He had to reduce the impact on the ball as much as possible and increase the friction effect along the direction of the racket. During practice, he first served a long ball close to the baseline. His shot was fast and sudden. At the same time, he exerted force with his center of gravity. The contact point could not be too high. After he became familiar with it, he would serve a low and short shot. He mainly used his body to move, using his elbow as the pivot point, swinging his arm like a pendulum to exert force, and adding on the instantaneous explosive force of his wrist. - For a right side topspin, touch the right side of the ball and rub it forward and upward; for a right side downspin, touch the right side of the ball and rub it forward and downward. 2. ** Left Spinning Serve ** - [Position and Movement]: - Generally, the serve is served with a left hand spin, and the position is close to the left side of the table. When taking the racket, move your wrist with your belt and turn your waist slightly to the right to extend your wrist. When the ping pong ball fell to the chest, the head of the right hand holding the racket had to stand up diagonally to the right. - ** Instant Touch **: - He applied more force to rub the ball. He retracted his wrist and rubbed the left side of the ball to the front. At this time, the racket was in an upright position. When he made his move, his elbow felt like it was slightly extended, and his wrist and fingers instantly exerted force to accelerate the friction on the left side of the ball. - ** Subdivision **: - To serve a left-side backspin ball, the ball should touch the ten o'clock direction of the racket and rub downward to the left. The opponent's return ball would easily fall into the net. If the judgment was not good, the ball would also easily suffer from side spin, causing the ball to fly out of the table to the left. To serve a left-side topspin ball, when the table tennis ball touched the ten o'clock direction of the racket, the ball should rub upward to the left and do a lifting and hooking action. The opponent's return ball would easily go out of bounds or go high. 3. ** Hook serve ** - ** Hook Hair Side Spinning **: - He let the table tennis ball touch the two o'clock direction of the racket, touch the bottom right side of the ball, and rub it from the bottom right to the top left. The moment the friction happened, his wrist swung forward and upward. - ** Hook Hair Side Down Spinning **: - At the 10 o'clock direction of the contact racket, rub the lower right side of the ball from the lower right to the upper left. After rubbing, add a fake action of lifting up, so that the action of the side up and side down is similar, increasing the confusion. In addition, there are some general points to pay attention to when serving, such as the distance of the racket should not be too small, the explosive force should be grasped well, the waist and hand should be combined, the friction should be sufficient ("very solid thin friction"), pay attention to the shape of the racket, clearly touch the ball point and the ball point, grasp the timing of the touch, the fingers should be used to withstand, and also grasp the joint force. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-09-04 08:17

How to make the strongest spin in table tennis

To send out the strongest spinning table tennis ball, you can start from the following aspects: 1. ** Rubbing part **: - Try to rub the ball with the racket head. Whether it was a topspin, backspin, or sidespin serve, the point of friction between the ball and the racket was closer to the front part of the racket head. Because the friction speed of the racket head was much faster than the speed near the handle, the ball that was rubbed out would spin more. - Topspin usually rubbed the top half of the ball upward, backspin rubbed the bottom half of the ball downward, and sidespin rubbed the side of the ball (from left to right or right to left, the resulting left-hand spin and right-hand spin, plus the topspin or backspin components, it became a side-topspin or side-downspin ball). 2. ** Speed of friction **: - When rubbing the ball, the speed must be fast and the friction must be thin. When balls with different rotations were rubbed at the corresponding friction parts, the faster the friction was, the more the ball would spin. 3. ** Serving action **: - The movements should be standard, and the range should not be too large or too small. When it was appropriate, the forearm drove the wrist and racket to rub the ball in different directions (up, down, left, and right). The ball rotated differently in different directions. You need to have explosive power in your wrist and swing it hard. 4. ** Contact depth and wrist force **: - Increase the depth of contact between the rubber and the table tennis ball. At the same time, the more strength the wrist exerted, the stronger the rotation of the ball. However, if he rotated sideways, he would turn sideways, and if he rotated up and down, he would rise or fall into the net. He needed to adjust according to the actual situation. 5. [Center of Gravity and Position]: - The center of gravity had to be lowered so that the ball could return to its original position quickly after the serve and ensure that the arc of the ball was relatively flat. - Standing close to the shore, close to the table, with his thighs at the corner of the table tennis table, one foot in front and one foot behind, it was easy to attack and defend. - When the ball is swung, the hand should be loose, and the three fingers holding the racket should be tight, so that the wrist can be fully extended. The fingers should suddenly increase the friction force; The big arm should clamp the body, the swing radius is about 90°, the racket is tilted back, and the friction should be thin. At the moment of throwing the ball, the body turned 90 degrees, the wrist stretched back, the board leaned back, and the forearm opened to 90 degrees. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-10-24 18:17

Table tennis training ball

There are many types of table tennis balls on the market. For example, the Double Happiness DPS had a table tennis training machine with a 40+ new material white table tennis ball; the Venison had a factory direct sale and wholesale of the new material of the three-star ABS 40+ high-elastic table tennis ball. Decathlon's table tennis training balls were 40+ABS one-star white balls, 6 sets, made of 40+ABS material. This material made the ball have excellent wear resistance, endurance and elasticity, which could guarantee good flight performance and stability after multiple hits. Its star rating was one-star, suitable for beginners and intermediate level table tennis enthusiasts to improve their skills and training effects. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-21 10:34

Table tennis ball size comparison table

The size of the table tennis ball had been adjusted. The ball used in international competitions was 40 millimeters in diameter and weighed 2.7 grams. Before 2000, the diameter of the ball used in international competitions was 38 millimeters. In addition, the ITTF may adjust the size of the table tennis ball to 45mm, but this adjustment has not been officially implemented. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-08-07 10:56

Table tennis ball serving device

The table tennis server was a common entertainment and training tool for many stadiums and players 'families. It was suitable for society, schools, families, professional training venues, and other scenarios. It had many functions: 1. In terms of spinning balls, you can send any up, down, left, or right-hand ball, as well as a variety of side-up and side-down mixed spinning balls. You can also send a non-spinning ball. It uses two-wheel drive, and the speed and rotation can be adjusted respectively. It can be close to real combat. 2. Landing point and angle: The pitch angle of the ball can be adjusted up and down, and the landing point can be set to change from front to back or left to right. It can achieve fixed-point, multi-area and multi-point launch (note that each adjustment needs to be stopped and cannot be automatically adjusted during the hitting process). 3. The speed of the ball: the speed of the ball, the frequency of the ball, and the swing speed of the machine head are all set up with multiple gears that can be adjusted at will. 17 - 90 balls per minute. 4. Recovery and ball supply: With automatic recovery and ball supply system, you can continue to hit without picking up the ball. 5. In terms of installation and dismantling, it only takes a few minutes to install and disassemble quickly without any tools. In terms of types, the power-less sparring devices were divided into three types: floor-standing type, tabletop type, and portable type. They were composed of special wooden boards, table tennis rubber, and stands. Different types had different characteristics. The floor-to-ceiling type was the size of 16 uncut square sets of rubber. The red was the reverse rubber with a sponge thickness of 2.0 mm, and the black was the medium-long particle rubber with a sponge thickness of 1.0 mm. It was the largest and was suitable for practicing the mid-range and long-range force technique. The tabletop type was the size of 8 uncut square sets of rubber. There was only one table stand, which was suitable for practicing the close-range technique. The portable board was the size of eight uncut square rubber covers. There were two stands, one on the floor (slightly smaller) and one on the table. The structure was similar to a real racket, and the angle and distance could be adjusted freely. In addition, there was also an artificial intelligence robot table tennis server. For example, the world's first artificial intelligence robot table tennis machine was born in the China Table Tennis Academy. It could restore the natural serve motion, hit the ball with different landing points and different rotations, and could also freely combine the serve rhythm to help athletes carry out targeted intensive training. The Pombert robot had two mechanical arms, one for throwing the ball and the other for hitting the ball. It could simulate different styles of play through rapid changes in the racket, and could be connected to the mobile APP to realize a customized training plan. It could be responsible for the training of multiple players at the same time, freeing the coach's hands and improving training efficiency. Moreover, the AI server could provide real-time feedback and data analysis. It could interact with the mobile application and provide real-time feedback of training data, helping athletes to improve their technical movements and adjust their training plans. There were a variety of table tennis machine related products on the market, such as the Double Happiness table tennis machine and the Ping Pong S - 1001 double-headed table tennis machine. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-22 07:09

The price of the rubber of the table tennis ball

There were many prices for the rubber of the Prideful table tennis ball, ranging from 84 yuan to 368 yuan, such as 84 yuan, 85 yuan, 142 yuan, 145 yuan, 155 yuan, 160 yuan, 161.5 yuan, 164.9 yuan, 165 yuan, 170 yuan, 171 yuan, 175 yuan, 183 yuan, 185 yuan, 185.25 yuan, 188 yuan, 198 yuan, 207.1 yuan, 208 yuan, 218 yuan, 238 yuan, 248 yuan, 353 yuan. 368 yuan, etc., and the products with different prices had different numbers of comments after discount. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-07-22 20:17

What is the size of a table tennis ball?

Table tennis balls were spherical, with a standard size of 40.00 mm and a weight of 53 - 70 grams. They were white or orange in color and made of cellophane or plastic. While watching the Olympics, you can also read the wonderful novels related to the Olympics!

1 answer
2026-08-06 19:05
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z