Illustration of the manufacturing method of the leg sling
We can get the following diagram of the manufacturing method of the leg sling: 1. " Prepare materials: A wooden stick or plastic tube about one meter long and about one centimeter in diameter; a string or fishing line; a small iron hook or iron sheet; a knife or pliers. 2. The material was processed appropriately: a wooden stick or plastic pipe was sharpened to make it easier to hit the ground, and a groove was made on the forked branch. 3. The forked branch was hammered into the ground. It did not need to be too high from the ground. 4. He inserted an elastic rod into the back and made a living circle. 5. He tied a small wooden stick to the hoop and tied one end to the elastic rod. Please note that these steps are summarized based on the search results provided. There may be other production methods.
What does leg sling mean?
Hanging leg cloth was a kind of snack in Shanghai and was one of the favorite breakfast foods of Shanghainese. It was a kind of flatbread wrapped with eggs, fried dough sticks, pickled vegetables, and other ingredients. Then, it was sprinkled with chives and rolled up to eat. The leg sling cloth did not mean the leg sling or other building materials.
Lantern manufacturing method
Here are some ways to make lanterns: ** 1. Creating lanterns with photoshop (simple electronic lanterns)** 1. He used the [Oval Tool] to draw an oval as the outline of the lantern. 2. Press [Control +J] to copy an oval shape, turn off the fill color, and choose yellow for the stroke. 3. Clone the yellow oval, press [Control +T] to change it freely, and shrink the yellow oval. 4. He copied a few more layers of yellow ovals and shrunk them freely. 5. Using the [Rectangle Tool], he drew an orange and yellow gradually changing rectangular shape and placed it above the lantern. 6. He copied a rectangular shape and placed it under the lantern. 7. By adding the hanging rope and the tassel at the bottom of the lantern, the simple electronic lantern production could be completed. ** 2. Use a piece of paper to make a lantern (Parent-child handmade lantern)** 1. Father's method: - He took out a piece of transparent tape and cut it out, painted it red, and arranged it into four squares with toothpicks. Then, he pasted decorations such as mooncakes and stars on it. - Then, he stuck a layer of transparent glue on it, folded the edges and pasted them on, and used the same method to process the upper and lower parts and punch holes. - If you don't have a pendant, make one yourself. Cut the rectangular paper into 0.5 cm thin strips, stick a red string and roll it up, then stick a yellow paper decoration through the hole. ** 3. Use mineral water bottles to make lanterns ** 1. Every 1.5 centimeters, he would cut the plastic bottle into strips. 2. Thread a tassel at the bottom of the bottle. 3. Put a red balloon at the mouth of the bottle and blow it up. 4. He closed the bottle cap and tied a rope to the small wooden stick. ** 4. Use transparent tape to make lanterns (transparent Mid-Autumn Festival lanterns)** 1. He made two squares and sealed the top and bottom to form the main body of the lantern. 2. Make a tassel, cut the bottom of it with a piece of paper, put a rope in the middle and roll it up. 3. He hung the tassels through the lantern. ** 5. Use chopsticks and crepe paper to make palace lanterns ** 1. He placed four pairs of chopsticks into a square, stacked three layers of chopsticks in the same way, fixed the connection points with 502 glue, and tied the four corners with red rope to make two such bases. 2. He took out a pair of chopsticks and used a red string to tie the two ends of the chopsticks to the two bases. He used the same method to fix the other three sides with chopsticks to complete the lantern skeleton. 3. Cut the crepe paper to a suitable size (you can stack it a few times before cutting it to ensure that it is neat), then circle the cut crepe paper around the skeleton and stick it on the four pillars with double-sided tape. 4. He tied a red string to each of the four corners of the lantern, tied the four strings together into a knot, and put a chopstick on it. 5. Red tassels were hung at the bottom of the lanterns, and decorations could be attached to the lanterns according to their preferences. ** 6. Making red lanterns with red packets (Two methods)** [Method 1:] 1. Prepare some unwanted red packets, cut off the top seal, and then use a utility knife to open the three edges of the red packet. Divide one red packet into two pieces, take the back of the red packet, and cut off a part of the edge (about one centimeter wide). 2. He took the side of the red packet with the letters and drew a one-centimeter-wide line on the left and right sides with a pen. The inside was divided into 0.5 mm equal parts, and then he used a hand-made knife to cut it according to the fine lines. 3. Prepare an appropriate amount of double-sided tape and stick it on the left and right sides of the red packet. Stick the bottom of the letter to the bottom of the red packet. 4. He cut off a part of the left side of the red packet, stuck double-sided tape on the bottom, and glued it to complete the bottom of the red lantern. 5. He prepared a scrap edge that he had cut out earlier, folded it together, and glued it to the top of the red lantern. [Method 2:] 1. He prepared seven red packets, folded them horizontally and then vertically, and divided the red packets into four. 2. Fold the four corners of the red packet in half (with the middle line as the fixed point), and fold six red packets for later use. 3. He stuck double-sided tape on the back of the folded corner of the red packet and stuck the corners of the red packet together to form the base of the lantern. 4. Prepare a single-sided red packet skin, leave one centimeter at the edge without trimming, and divide the inside into 0.3 mm long strips (be careful not to cut). 5. Sticking double-sided tape on the top of the red packet, he prepared a red string and rolled it from left to right into a tassel shape. 6. He made some small holes at the bottom of the lantern and hung the tassel at the bottom of the lantern.
Bamboo fence manufacturing method
The method of making a bamboo fence was as follows: First, find a few fresh bamboos, cut them down, and remove the scabs and tips. Then, he used a saw to cut the bamboo into the required height of the fence, and each section was cut open with a knife. Next, he made bamboo strips, cut the bamboo into a width of about 10 mm, and removed the yellow bamboo strips. He laid the bamboo pieces that he had just cut open on the ground and used the bamboo strips that he had made to connect the bamboo pieces according to the interweaving method. After the production was completed, he could choose to plant some flowers or trees to increase the aesthetics of the courtyard.
Method for manufacturing simple globe
The following are some simple ways to make a globe: ** 1. Make a simple globe with table tennis balls ** 1. ** Confirm the North and South Poles and the Prime Meridian ** - A thin line was used to circle around the joint of the table tennis ball. The two ends of the thin line were fixed to determine that one point was the North Pole and the other point was the South Pole. - One of the meridians was determined to be the prime meridian, and the other was the 180° meridian. 2. ** Division of meridians and latitudes ** - Draw the middle point of the thin line on the table tennis ball, connect each equal point and the two poles, 90°E, etc., and then circle the table tennis ball once. He took off the thin line and drew a mark on the ping-pong ball at the middle of the thin line after each movement. - Mark the equal points, divide each meridian in the northern hemisphere into three equal points, connect all the marked points closest to the equator on the north side of the equator, draw the other meridians and mark the degrees. - He determined the equator and marked the degrees. He used a thin line to connect the two poles, and then connected these midpoints with a pen to form the equator. Divide the equator into two parts, north and south, and drill a small hole on each of the north and south poles (you can use incense diamonds). - Draw the prime meridian and the 180° meridian, circle around the table tennis ball, and then use the same method to draw the 60°N latitude, 30°S latitude, and 60°S latitude and mark them. 3. ** Note Information ** - Write the degrees on the table tennis ball so that every minute is 30 degrees apart. At the same time, you can also mark other geographical information on it. ** 2. Use game paper to make a simple globe ** 1. ** Prepare materials ** - Prepare scissors, glue, and a paintbrush. Obtain the game paper from the public account of "Kuomaru Kaixin School"(you can get it by replying to "Globes"). There are three size of globe materials in the game paper. You can print and cut them according to your needs. It's best to choose a harder paper. 2. ** Assembling the globe ** - After cutting out the material, he bent it slightly and glued it to the jagged shape according to the order on the game paper to fix and connect the material. 3. ** Perfecting the globe ** - After assembling the globe, he could use a paintbrush to color and draw the locations of various countries on the globe.
Guqin manufacturing, size illustration, complete collection
The following are the size related to the production of the zither: - The distance between Yueshan and the edge of the piano head was 8 - 12 cm. The groove started at 4 cm from Yueshan to the end of the piano. The groove started at 5 cm from the end of the piano to the end of the piano. The most solid wood left in the groove was the above value. The minimum was 2 cm from the head to the groove, and 2 - 5 cm from the end to the groove. The width of the left and right sides of the groove was generally 1 - 1.5 cm. The circumference was the same size except for the two sides. - To make a zither, the board needed to be 1.25 meters long, 21.5 centimeters wide at the shoulder, and 5 centimeters thick (or height). The thickness of the edge of the board was usually about 1.2 centimeters. - The phoenix tongue was 12 centimeters long, 1.8 centimeters long, and 0.2 centimeters long on both sides. - The goose's feet needed to be about 4 centimeters wide or more. If the area was too small, the goose's feet would not be easy to fix and would easily be crooked. - The dragon pond was 21cm long and 2.5cm wide (the size in the ancient book), and the phoenix pond was 10cm long and 2.4cm wide. The dragon pond and the phoenix pond were required to be raised, and the thickness was usually 3 - 2.5cm, with some being 1.8cm thick. - The traditional instruments of the ancients were about 120CM, the Kun Qin (female qin) size about 110 cm, the knee qin size about 90 - 100 cm, and the sleeve qin was about 60 - 70 cm. - The length of the zither mentioned by the sages of the past dynasties was three feet six inches six minutes, which referred to the length of the string. If Longya, Yueshan, Chenglu, and the forehead were added up, it would be about four feet. However, it was difficult to reach a conclusion because of the different measurement systems of the past dynasties. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
What was the method of illustration in literature?
Illustration was a commonly used research method in literary studies. It referred to the use of specific examples or plots to explain a certain topic or point of view. The illustration method usually chose some representative works or plots to analyze and compare to prove the accuracy of a certain theme or point of view. Illustration is very important in literary studies because it can help researchers better understand the meaning and value of a certain theme or point of view. By choosing some specific works or plots to analyze, researchers can better understand the background of the works, the author's creative intentions, the internal logic and external performance of the works, and thus better understand the entire literary system. There were many ways to use the illustration method, such as choosing literary works from different eras to compare and analyze the works of different authors in the same period, or choosing a specific theme or point of view to analyze the meaning and value of related works and plots. Illustration is an indispensable research method in literary studies. It can help researchers better understand literary phenomena and the meaning of works.
Illustration of bamboo fixing method
There were many ways to fix bamboo pieces. The following were some common methods: 1. [Binding method: You can use rope or thread to bind it.] He first marked the places that needed to be connected, then cut out a part that could be inserted into another bamboo, connected them together, and tied them up. 2. Plugging method: First, you need to cut off some bamboo skin at both ends to form a plug-like tip, trying to preserve the integrity of the bamboo piece as much as possible. Then, he connected the two bamboos together and inserted the peeled end into the other bamboo. Use glue, cement, or other materials to fix it. 3. [Buried head cap method: suitable for thicker bamboo.] He first made one end into a cylinder (also known as a "cap"), then cut a matching notch on the bamboo at the other end. Finally, he fastened the cap on it and secured it tightly with a tool. 4. Screw fixing method: You can use a screw to fix the bamboo pieces together. First, he laid down half of the bamboo piece, then passed the bamboo piece through the fixing incision, and then laid down half of the bamboo piece. Every five pieces were fixed once, and they were fixed with screws. These methods could be chosen according to actual needs and application scenarios.
Illustration of the trimming method of bamboo
The method of trimming bamboo included the following steps: 1. Topping the top during the seedling stage would remove the top branches of the plant. Topping could be done many times to control the growth height and promote the growth of side branches. 2. Cut off the withered leaves and pests in time to avoid affecting the growth. 3. Cut the branches and leaves that are too dense, remove the branches that are too dense, the branches that are inside the chamber, and the cross-branches, so that the remaining branches and leaves have enough space to grow and increase the light transmission and ventilation. 4. For long branches, they could be cut short to maintain the overall beauty of the plant. Please note that the above answers are summarized based on the search results provided. There may be other details that need to be referred to for the specific trimming method.
Method for manufacturing foldable bamboo fence
The manufacturing method of the foldable bamboo fence could use steel nails, linen, or bamboo strips to fix the vertical poles. The specific steps were as follows: First, use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, according to the required length, the bamboo board was fixed to the wooden or bamboo pole with a fine hemp rope or plastic rope. Finally, he used a hammer and nails to fix the fence to the ground, completing the production of the foldable bamboo fence.
Method for manufacturing foldable bamboo fence
The manufacturing method of the foldable bamboo fence. First, he needed to prepare bamboo and use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, he used a saw to cut the bamboo board into the required height of the fence, and each section was cut open with a knife. Next, he began to weave a bamboo fence with linen rope from the middle, folded it in half from the middle and fixed it on the first bamboo board, then woven it one by one. When 15-16 bamboo fences were woven, they could be folded back and repeated for a second time, 4-6 times back and forth to make the bamboo fence stronger. Finally, repeat the steps above to make more sections of the bamboo fence as needed. In this way, a simple bamboo fence could be made.