Iron Man's miniature nuclear reactor, how many more years will it take to be invented? Probably hundreds of years.
This information was not mentioned in the existing novels.
A nuclear reactor novel that created Iron Man
I recommend a few super interesting novels! The Quintessential Space of Mortal Cultivation, a novel written by Winter Willow Without Leaves. Li Ming transmigrated to the Seven Mysteries Sect and was eliminated during the entrance test. He relied on a cheat to obtain the Eternal Youth Technique. In the end, he did not have any wood spiritual roots or other spiritual roots. The story was very suspenseful. Metal Core, a science fiction novel written by Tamburn. After Chen Jun fused with the [Metal Core], his life had changed drastically. The [Metal Factory] could create super metals and powerful mecha warships, while the [Metal Lifeform] could create all kinds of powerful metal lifeforms. With the upgrade of the core, he wanted to lead humanity to defeat the alien civilization. The book list was rated very well. From Mountain Thieves to the Heavenly Emperor, a fantasy novel created by the world. Xu Boju had transmigrated into the second generation of the Mountain Thieves. His father had died in battle, and he had internal and external problems. He wanted to break out of this situation. There were also elements of innovation. The information about the male and female leads was also very detailed. " I, the Navy General, Join the Chat Group ", a light novel written by UHaeU7. The world had been turned upside down after the admiral came out of the city. The relaxed atmosphere was very attractive. The Alchemist's Bastion, a science fiction novel written by the Immortal Wick. Grade C students on apocalyptic planets receive alchemist legacies. Alchemy and advanced technology collide. Bastion ships are super powerful. Although the second half was rushed, overall it was not bad. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Is the nuclear reactor on Iron Man's chest feasible in the real world?
From a scientific point of view, the nuclear reactor on Iron Man's chest was fictional and did not conform to reality. A nuclear reactor is a device used to generate electricity. It uses a nuclear reaction to generate heat that drives a turbine to generate electricity. In the real world, nuclear reactors could not use nuclear reactions to generate energy because nuclear reactions would produce high-energy radiation that had a negative impact on the environment and human health. Therefore, we can't use nuclear reactors to generate electricity in the real world. The nuclear reactor on Iron Man's chest was a sci-fi element that appeared in Marvel comics and movies. Its design and functions were fictional and only existed in comics and movies.
Could humans invent the small nuclear reactor on Iron Man's chest?
According to current scientific knowledge, humans could not invent a small nuclear reactor similar to Iron Man's chest. A nuclear reactor was a device that used nuclear fission reactions to generate heat energy to drive a turbine or other mechanical device. Small nuclear reactors were usually used for research, experiments, and energy supply in emergencies. The small nuclear reactor on Iron Man's chest was a design in a fictional work. Although the current level of science and technology had not yet reached the level of the invention of nuclear reactors, scientists were already researching the application of nuclear energy and developing nuclear reactor technology. In the future, with the continuous development of science and technology, we may be able to expect more advanced nuclear reactors to bring more convenience and development to mankind.
Why hadn't the miniature ark reactor on Iron Man's chest been realized in reality?
The miniature ark reactor on Iron Man's chest had not been realized in reality mainly because the ark reactor was a fictional technology. Its design and technology originated from science fiction novels and movies. The ark reactor was an energy storage device that provided energy by converting the heat generated by the nuclear reaction into electricity. Its design was very complicated and required highly advanced materials and manufacturing processes. Currently, due to technical and material limitations, we are unable to create a similar device. In addition, the energy requirements of the ark's reactor were also huge. It needed to produce enough energy to meet the needs of the entire human body. Even if we could achieve an ark reactor, its size and weight would make it difficult to use in everyday life. In summary, although the ark reactor was fictional, its technology and design had exceeded the current scientific technology and manufacturing capabilities. Therefore, we haven't been able to implement a similar device yet.
Nuclear fission in the reactor
Take Uranium-235 as an example. When the nucleus of Uranium-235 was bombarded by external neutrons, one nucleus would absorb a neutron and split into two smaller nuclei, releasing two to three neutrons at the same time. The neutrons produced by the fission bombarded another Uranium-235 nucleus, causing new fission. If this continued, it would be a fission chain reaction, which would produce a large amount of heat. In order to achieve such a nuclear fission reaction, the reasonable structure of the reactor should include nuclear fuel, moderator, heat carrier, control facilities, and protective devices. The nuclear fuel needed to be made from uranium ore through processes such as selection, crushing, acid soaking, and concentration to produce a certain amount of uranium and a certain geometric shape of the rod. In a traditional nuclear fission reactor, in order to improve the chain fission reaction efficiency of nuclear fuel, it was necessary to decelerate the high-speed neutrons (fast neutrons) produced by fission into slower neutrons (thermal neutrons). A neutron moderator composed of lighter nuclei (such as light water, heavy water, etc.) would be added to use the hydrogen atoms to decelerate the high-speed neutrons. The heat carrier could be used to take away heat to prevent the reactor from burning down due to overheating. The heat that was extracted could turn the water nuclear reactor into steam to drive the gas turbine to generate electricity. The control facility allowed the nuclear reactor to operate according to human wishes. The protective device was because uranium and fission products were highly radioactive and could cause harm to humans. In addition to the traditional reactors that used Uranium-235 as nuclear fuel, there were also fast neutron reactors (nuclear fission reactors without neutron moderators) and thorium-based molten salt reactors (fourth-generation reactor nuclear energy systems that used thorium as nuclear fuel and composite fluorides as coolants). Their nuclear fission reaction principles were similar, but there were differences in specific fuel, efficiency, safety, and so on. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Is the nuclear submarine reactor nuclear fusion or nuclear fission
The nuclear submarine reactor was a nuclear fission reactor. The nuclear fission reaction released a large amount of heat energy through nuclear fission, and then used a heat carrier with a certain pressure to " carry out " the heat energy. After a series of conversion, it provided propulsion and power supply for the nuclear submarine. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Prehistoric civilization nuclear reactor
Traces of a nuclear reactor from two billion years ago were found at the Oklo mine in Africa. This discovery triggered many speculations about the prehistoric civilization. Some people who supported the existence of prehistoric civilizations believed that nuclear reactors required a lot of manual operation to operate normally, such as enriching uranium- 235, controlling the reaction rate, adding neutron moderators, etc. Therefore, these nuclear reactors should have been built by a prehistoric civilization on ancient Earth. However, scientists had fully explained it from the perspective of natural formation. Two billion years ago, the relative abundance of Uranium- 235 in the Oklo area could reach about 3.7%(its half-life was about 704 million years, and the concentration at that time reached the standard required for nuclear reactors). The area had a special geological structure. A specific layer of sand rock contained a large number of "thin sheets" rich in Uranium minerals, forming 16 nuclear reaction zones. There were a lot of tiny gaps and cracks in the area, and underground water could enter and exit. Groundwater acted as a neutron dimmer and a cooler. These conditions satisfied the operating mechanism of the nuclear reactor under natural processes. Moreover, scientists had found evidence of natural formation in their research, so they believed that this was the work of nature and had nothing to do with prehistoric civilization.
A child creates a nuclear reactor
There were two animations related to nuclear reactors. The protagonist of the Nuclear Energy Knowledge Challenge came into contact with different experimental methods during his journey to explore the discovery of atomic energy. The Nuclear Safety Challenge introduced the safe operation of nuclear reactors and accident prevention knowledge. The animation had a system to identify reactor problems and take emergency measures, but there was no mention of children building nuclear reactors. In addition, in reality, there were teenagers who were influenced by scientific magazine reports to build nuclear reactors. For example, Jackson Oswalt of the United States was influenced by the news that a 13-year-old child in the United Kingdom had successfully built a nuclear reactor. He wanted to build a reactor at the age of 12, and the materials were ready to be obtained from the Internet. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Iron Man Ark reactor self-made
A method to make a model of the ark reactor was as follows: Prepare the materials, including wood, 10mm thick acryl board, smooth electrical tape, Velcro tie, thick and thin enameled wire, switch, rubber wire, 12V blue LED light strip (10 yuan for a certain treasure), 12V power supply (can also be replaced with 9V), plastic sheet, marker, paper cutter, hand-held electric grinder, hot melt glue. Production process: 1. When cutting the acryl ring, the inner diameter might be wrong the first time. If it was too narrow, it would need to be cut again. You can use a compass with two sharp feet to draw the line. If you have the conditions, you can customize it online. There is no need to polish it. It costs about 10 yuan. After the second successful cutting, it was simply flame polished. 2. The blue LED light strip was pasted on the inner ring and fixed with an electrical tape. Each electrical tape was tied with a Velcro tie on both sides and the middle was wrapped with an enameled wire. 3. He used a plastic sheet to cut out rings and small strips with holes. The small strips were cut in half on one side to make it easier to bend. He used hot melt glue to make a few small balls, cut them into round pieces, and hollowed them out in the middle. Then, he used a black marker to paint all the above items black and assembled them. 4. In a bottle cap, put a copper wire ring of different diameter that had been hooped in advance (such as using thick enameled wire and tea bottle cap), and fix it with hot melt glue. 5. The base was made into a paper mold and then cut with foam board (or wooden cardboard). Finally, the base was assembled with the upper part. The parts could be adjusted at any time during the process. Later on, he could color the circuit or plug it into the cavity below. There was also a method to make the reactor in the ark construction module: Steel, copper, iron, and other materials were needed. A larger metal box was chosen as the outer shell of the reactor, and the interior of the reactor was filled with a layer of copper to increase thermal conductivity. Iron and steel were stacked on the copper to increase stability. After the production was completed, it could be connected to the power supply to generate energy, but the surrounding environment must be ensured before use. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to charge the Iron Man reactor model
The recharged version of the Iron Man reactor battery had a capacity of more than 200 milliamperes. It could be charged directly and lit up for about three hours when fully charged. However, no more detailed information about the charging method could be found. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>