Why does the screen turn black when I read a novel?

Perhaps it was because the phone had an automatic lock function when reading novels. This feature would automatically turn off the screen when reading a novel to prevent the phone from being stolen or accidentally touched. However, if this function was turned on, the screen would reopen when the novel was stopped. If the black screen problem still exists, you can try to turn off the automatic screen lock function or try to change the application's screen lock method. Some applications provide different ways to lock the screen, such as swipe to unlock or fingerprint recognition. If you still encounter this problem, it is recommended to seek help from the phone manufacturer or application vendor. They might be able to solve the problem or provide other solutions.

I recommend " Becoming a God Begins from Eating Soil." This funny and dissing novel tells the story of the failed author, Chen Ming, who transmigrated to another world and became an earthworm. Later, he began to become a god by eating soil. I hope this novel can bring you joy and make you forget the black screen of Apple Red Sleeves. Muah.😉

If the computer screen turned black, the following ideas could be used to solve the problem: ** 1. Black screen after computer is turned on ** 1. ** Check the power supply of the host ** - Check whether the power strip is energized, whether the power strip switch is pressed, and whether the power plug of the host is loose to ensure that the host is energized normally. 2. ** Check the host's start-up status ** - ** Host has been started ** - After pressing the power switch, under normal circumstances, you could see the green or blue indicator light on the host panel (unless the indicator light on the case panel was damaged), and you could also hear the sound of the fan rotating in the case. If the host has a small speaker, a beep will be heard after the normal self-test, and the screen should light up at this time. - ** Host not started ** - ** Host self-test not completed ** - If you confirm that the host computer is powered on but you don't hear a beep, and the indicator light doesn't light up even when you press the keyboard's CapsLock key, it may be due to poor memory oxygen contact (especially when the computer suddenly can't start). If the host has a small speaker, the memory self-test may hear an "beep" alarm and other error prompts. The solution was to open the case, pull out the memory stick, and reinsert it with an eraser. This could solve 90% of such black screen failures. - ** Host self-test completed ** - If the keyboard's case-size indicator light can be switched with the keys, but the monitor does not light up, it is useless to replace the monitor. It may be a problem with the graphics card. First, check whether the host has a standalone graphics card or an integrated graphics card, and whether the signal cable is plugged into the integrated graphics card. If the signal cable is plugged in correctly, you can pull out the standalone graphics card, plug the signal cable into the integrated graphics card output interface (provided that the CPU has a nuclear display), and turn on the computer to see if the display is lit. Many times, poor contact with the goldfinger of a standalone graphics card would cause this problem. The solution was to pull out the graphics card and wipe the goldfinger with an eraser. 3. ** Check the power supply of the monitor ** - If you hear the beep but the screen doesn't light up, press the monitor power switch to see if the indicator light is on. If the indicator light is not on, check if the monitor power plug on the power strip is unplugged; if it is an external power supply, try to replace it. 4. ** Check the display signal cable ** - If the indicator light of the monitor is on and the image on the screen flashes but no blue desktop appears, check whether the signal wire of the monitor is plugged in properly. Even if it is plugged in properly, unplug it and plug it in again. The plug connecting the host and the monitor must be plugged in again to prevent poor oxygen contact. 5. ** Check the display signal source selection ** - If there was no problem with the signal line, call out the display's OSD menu to check the signal source settings. If the settings were inconsistent with the signal line, reset it. If the signal setting and the host were fine, the monitor might be damaged. You can replace it with a normal monitor for testing. ** 2. The computer screen turns black during use ** 1. ** Brightness problem ** - Use the shortcut keys to adjust the brightness. There are usually special shortcut keys on the computer keyboard (such as the F2 key or the key with the sun symbol) to increase the brightness of the screen. If the brightness is adjusted to the lowest and the screen turns black, you can increase the brightness through the shortcut key. 2. ** System or Driver Problem ** - Trying to enter safe mode. In the Windows system, restart the computer, press the F8 key when the system starts up until the boot options interface appears, select "safe mode" and enter; in the MacOS system, restart the computer, press the Shift key when starting up until the login interface appears. After entering safe mode, you can try to adjust the screen brightness again. 3. ** Other situations ** - Reboot the computer, press the power button to completely shut it down and then restart it again to see if the screen returned to normal. - Check if there are any updates available in the system and proceed with the update. In the Windows system, find and install system updates through the "updates and security" option in the "settings" application; in the MacOS system, find and install system updates through the "software updates" in the "system preferences". - If you suspect that it's a hardware problem, you can connect it to an external monitor to see if it's working properly. In addition, if the computer power indicator lights up, the fan turns, the black screen does not show and the keyboard light does not light up, it may be that the memory stick is loose or there is too much dust. You can wipe the memory stick and re-install it. If the computer shows a black screen after starting up, and the power light flashes, it may be the host power failure. You can open the case and re-install the power supply and the connection cable of the main board. If it still cannot start, it may be that the power supply is broken. Change the power supply. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

If the screen turned black while reading a novel on an electronic device, there could be several reasons: 1. ** In terms of hardware ** - ** Device Connection Problem **: If it is a computer or other device, check whether the connection cable between the computers is loose (applicable to the situation where the computer is connected to the monitor to read a novel). - ** Screen damage **: If it is a mobile phone, tablet, or e-reader, the screen damage may cause it to turn black. In this case, it is recommended to contact after-sales service or professionals to deal with it. - ** Power supply problem **: Check if the power supply is working properly and if there is any loose or damaged power cord. This may cause the screen to turn black due to insufficient power supply. 2. ** In terms of software ** - ** Automatic adjustment function **: The device may have the function of automatically adjusting the brightness of the screen. When the system senses that the environment is dim or certain pre-set conditions are met (such as to protect the eyes or save battery), the screen will automatically turn black. You can turn off the automatic brightness adjustment function in the device settings and then manually adjust the brightness. - ** System or application problems **: A system crash or a novel reading application malfunction may also cause the screen to turn black. You can try to restart the device. For mobile phones and tablets, you can also try to enter safe mode (press the power button and volume button to enter safe mode at the same time). In safe mode, you can eliminate the impact of some third-party applications on the system. If it was a problem with the reading app, you could try reinstalling the app. - ** Driver problem **: For computer devices, if the graphics driver is incompatible with the operating system, it may cause screen display problems. You can update or re-install the graphics driver. 3. ** Special function or mode **: Some devices have special functions such as eye protection mode or night mode. These functions may cause the screen to turn black or change color. You can check the display related settings in the device settings to see if similar functions are enabled and make adjustments. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

The reason why the screen would turn black after reading a novel was probably due to the battery life of the phone, the content of the novel, the screen resolution, and other factors. The battery life of the mobile phone is limited. If you use the mobile phone to read novels for a long time, the mobile phone battery may run out of power and cause a black screen. Some novels might contain too many graphics and animations, causing the screen resolution of the phone to be too high, exceeding the processing power of the phone, and resulting in a black screen. The phone may turn black because the screen temperature is too high or too low. This may be caused by the phone being placed in the wrong position or the screen temperature being too high or too low. If the black screen often occurs, it is recommended to check the phone's settings to see if there are any applications that take up too much battery life or to check if the phone's screen resolution is too high. You could also try switching the novel to a smaller font or reduce the image quality to reduce the burden on the phone screen.

If the screen turned black while reading a novel on an iPhone, it could be that the screen brightness was automatically adjusted, and the system automatically dimmed to protect the eyes. It could also be that a protective mechanism was triggered, such as the CPU temperature being too high, and the screen automatically turned black to protect the battery. If the screen of the iPad 4 is black, it may be a software or hardware problem. The software may be a bug or compatibility problem in the reading software. You can try to re-install or replace the software. The hardware may be a damaged screen, which can be detected by drawing lines or painting on the screen. It may also be affected by minor scratches or internal dust. You can clean the edge of the screen and the connection and update the system. If the problem is still a hardware failure, you need to contact after-sales maintenance. If the screen turns black when reading a novel, it may be caused by a system problem or software conflict. You can try to press the power button and the volume button at the same time for more than 7 seconds to turn the phone on and off again, or connect the charger to see if there is a charging display. There were many reasons why the screen turned black when reading novels on different devices. It needed to be analyzed according to the specific device. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

This was a common setting in novels, called "black screen mode" or "full screen mode." This setting usually appeared on computers, mobile phones, and other devices. When the screen brightness or contrast was too high, the novel screen would appear black mode, and only the text in the novel would be displayed. In novels, this setting was often used to create a tense and exciting atmosphere, making it difficult for the reader to predict what would happen next. At the same time, the black screen mode also allowed the readers to focus on the plot of the novel without being disturbed by other things.

In this case, it might be because the brightness or contrast of the screen for reading novels had been adjusted to the maximum, causing the screen to turn black as soon as the novel was clicked on. To avoid this situation, try lowering the brightness and contrast of the screen when reading novels, or set the brightness of the screen to "automatic" or "medium" to avoid manual brightness adjustment. You can also check if the resolution of the screen is high enough. If the resolution is low, it may affect the brightness and contrast of the screen.

If you don't want the screen to turn black while reading a novel in the Qidian Reading APP, you can open Qidian Reading, click the "My" button in the lower right corner, then click the "Setting" button in the upper left corner to enter the settings. On the Qidian Setting page, click "Reading Setting", and then adjust the "Lock Screen Time" to "Never". If it's a Huawei phone, you can set it to not black out by clicking on the settings in the phone. After entering the settings, enter "Hibernation" directly in the search box at the top of the page to search. In the search results, click "Hibernation", click "Hibernation" again in the new window that opens, and then choose the time you want in the pop-up hibernation time option. If the setting time in hibernation didn't work, it was recommended to restart the phone. Then, in the " settings ", find " display ". If it still didn't work, you could backup the data to the SD card and then double-clear the phone. Different cell phone models and reading software may have different settings, which can be operated according to the actual situation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

If it was an interesting novel, you could turn off the play lock screen display function by the following steps: first open the software, click the settings function, then click the switch to turn off the play lock screen display function. After turning it off, the system would automatically save the settings, and then exit the settings function. However, for other novel reading software, the reference did not give a way to turn off the lock screen display function, so it was impossible to answer accurately. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>