Dub novel money-making tutorial
The following is a tutorial on how to make money from dubbing novels: 1. ** Choose platform **: The more well-known platforms in China include "Himalaya","Get","Dragonfly PM", etc. When choosing, you should consider the number of users of the platform, the voice review mechanism, the remuneration standard, and other factors. It is recommended to choose a platform with good voice quality, strict review mechanism, and high remuneration. 2. [Choose a novel: This step is very important. It affects the subsequent recording process and the amount of remuneration.] You can choose popular novels, novels with high online reviews, or novels with a readership base. The remuneration for novels was higher than that for short novels, so he could give priority to them. 3. ** Recording and dubbing **: - In terms of equipment, he needed to buy high-quality recording microphones, sound cards, and recording software. - The recording venue had to be quiet and undisturbed. - He adjusted the position of the microphone to avoid any noise. - Pay attention to enunciating clearly so that the listener can understand. At the same time, the cadence is in place to express the emotions of the story. - Try to avoid slip of the tongue and read the story skillfully. 4. ** Revenue from uploading **: After recording the dubbing, upload it to the platform for release. The platform will conduct a sound review. After the review is passed, the remuneration will be calculated. Generally, the remuneration for this month will be obtained on the last working day of each month. The revenue will be directly transferred to the account. In addition, the following points needed to be noted during the actual operation: 1. The whole process would take a long time, and he would need to constantly hone his dubbing skills. 2. He had to have enough time and make reasonable arrangements according to his own situation to ensure that he could persist for a long time. 3. He had to constantly be creative, find new novels to record, and create better recording techniques to create better works. There were also some dubbing recruitment opportunities, such as 400 yuan/hour, 90 yuan/hour, 300 yuan/hour, etc. These auditions generally had the following requirements: 1. When recording a specific audition script, one had to use one's imagination, figure out the emotions of the character, enunciate the words clearly, and express one's voice according to one's personal understanding. 2. It ensured that the recording environment was quiet, eliminated environmental noise, and the noise of the computer's headphones. It did not spit out the microphone, did not break the sound, and eliminated the drooling sound. It also ensured that the breathing was stable and that the standard Mandarin was standard. 3. Both male and female voices can participate in the audition. There was no need for professional equipment during the audition stage. You could use a mobile phone. There was no need for other audio processing requirements. After the audition, the specific details would be communicated. Send the audition file to the designated email address (Shengpeiquan @ foxmail. com) as required, and indicate the contact information in the subject and body of the email according to the regulations. Pay attention to the audio format requirements and do not send the email repeatedly. The mid-tone results were usually notified about 3 - 10 days after the deadline. Read more exciting novels for free
A software tutorial for making a novel cover
Here are some software guides for making a novel cover: - **Photoshop**： - First of all, he had to download photoshop. After the download was complete, he clicked on the "file-new" button in the upper left corner. A box would pop up, and he would set the width to 600 px and the height to 800 px (different websites required different size). Then, he clicked OK, and a white background would appear. Next, he could officially make the cover. He clicked on "file-insert" and the cover material could be downloaded from Petal. - **Canva can draw **: - Open the Canva app, choose the book cover, click to view more, then choose the theme, style, price, and then choose the template to create. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Cover making novel tutorial picture
The following is a tutorial on how to make a cover photo for a novel: First, prepare a background image. I recommend you to search for "novel cover base image" on Petal Web. Remember to prioritize those images that say "Follow and discuss." Then, he opened the editing and imported the selected base map. He found the adjustment button in the tool bar and set the ratio to 3:4 (this ratio was close to the ratio of the picture on the cover of the novel). Then, he adjusted the picture to the same size as the canvas. Then, he entered the text, clicked on the text button, and then clicked on the new text to enter the title of the book. If he wanted the text to have different sizes and styles, he needed to enter the phrases separately. First, choose a text layer, click the edit button, and then click the style button to set the color and stroke. For the main characters (such as "defying the heavens and changing fate"), he had to choose a more generous font. After that, he had to adjust the spacing and size of the characters by clicking on Arrange. Then, he had to click on the flowery words to choose a nice style. If you feel that there is an empty space below the font, you can find the picture-in-picture in the tool bar and add it to import the picture that was previously stored in the phone. If the picture has a white background, click the Chroma Map in the tool bar. After clicking the color picker, move the ring to the white area, click the intensity button to adjust the value until the white area disappears, and then put the icon in the appropriate position. Enter the author's name and continue to adjust until you are satisfied. Finally, click the export button in the upper right corner to export the video (this video is actually still). After that, he opened his phone's photo album and found the video that he had imported. He clicked on the screenshot after playing it and cut out the excess parts of the screenshot, leaving only the cover image. He could also open Love Pen, Thought Painting X to make the final adjustments and size settings. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Interstellar novel cover making tutorial
There were two common ways to make the cover of an interstellar novel: ** 1. Use editing and production ** 1. Prepare the background picture: You can go to Petal Web to search for the "novel cover base picture", and prioritize the pictures marked "Follow and discuss". Those that are not specifically marked can also be used. 2. "import the base map into the editing map: After the selected base map is imported, find the adjustment button in the tool bar, set the ratio to 3:4, and adjust the image to the same size as the canvas (by pushing and pulling the image with two fingers). 3. Enter text: click on the text button, then click on the new text to enter the title of the book. If you want the text to have different sizes and styles, you need to enter the phrases separately. First, choose a text layer, click the edit button, and then click the style to set the color and stroke. For example,"Defying Heaven and Changing Fate" as the main character, he had to choose a generous font. After setting it, he had to adjust the spacing and size of the words. Finally, he had to choose a beautiful style. 4. [Add icon: If you feel that there is an empty space below the font, you can find the picture-in-picture in the tool bar. Add the picture-in-picture and import the picture that was previously stored in the phone. Remove the white background of the picture (click on the Chroma Matting in the tool bar, click the Color picker, and move the ring to the white area).] ** 2. Create it with PowerPoint ** 1. Downloading the Photoshop and creating a new file: click on the file in the upper left corner-New, set the width to 600 px, and the height to 800 px (different websites may require different size). After confirming, a white background will appear. 2. Placing materials and typing: Various cover materials can be downloaded from Petal Net, click on the file-Placing lace and other materials. On the left side, click on the "T" button and type the words one by one (you can download the font from the font manager). 3. Add decorations and author information: click on the rectangular tool on the left side of the tool bar to create a border, then add some decorations and fill in the author's information. You can also add things like "////////" or "..." And other custom decorations. 4. Save the file: click the file "Save As" button to save the file. If the author provided the material, it could also be used. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Mini games making tutorial
Python Mini games creation tutorial can be done through the following steps: 1. import the required library: In Python, use the import statement to import the required library, such as pygame and random. 2. Initialize the game: Use the pygame.init() function to initiate the game and set the size of the game window and other parameters. 3. Create a game window: Use the pygame.display.set_mode() function to create a game window and set the size and other attributes of the window. 4. Write game logic: Write the game logic and rules according to the selected game type, such as controlling character movement, collision detection, etc. 5. Handle user input: Use the pygame.event.get() function to obtain user input events and process them accordingly according to the event type. 6. [Game state update: Based on user input and game logic, update the game state, such as character position and score.] 7. Draw the game interface: Use the pygame.draw() function to draw the game interface, including characters, background, text, and so on. 8. Game Loop: Use the while loop to continuously update the game state and draw the game interface to achieve continuous game operation. 9. End the game: According to the end conditions of the game, determine whether the game is over and perform the corresponding processing, such as displaying the end of the game screen, saving the score, etc. These are the basic steps for making Python Mini games. The specific implementation method can be adjusted and expanded according to different game types and needs.
RPG game making tutorial
We can come up with the following answer: RPG Game Making from Scratch is a series of tutorial aimed at teaching how to make RPG games. The tutorial consisted of multiple parts, covering the creation of basic scenes, character design, numerical settings, level design, item and skill creation, triggers and logic, dialogue, buttons, variables, and more. The tutorial provided step-by-step instructions to help readers understand how to use specific production tools and software to create their own RPG game. However, the specific tutorial content and steps required reference to the relevant documents and video tutorial. This information was not clear in the provided search results.
Mobile poster making tutorial
Mobile posters could be created using a variety of mobile applications. Some of the recommended applications include Easy Snapping King, Butter Cameras, and Canva Paintable. Easy screenshot king provided a variety of poster templates that could be replaced and edited as needed. The butter camera had a variety of filter and templates, suitable for making personal photos and creative posters. Canva was a very convenient design tool that provided more than 60,000 original design templates that could be categorized according to their purpose. In addition, Canva also provided a huge library of materials, including illustrations, pictures, and font. These applications could help users easily design mobile posters, edit and customize them according to their personal needs.
Doujinshi cover making tutorial
The following was a tutorial on how to make a cover for a novel: ** I. Preparing Work ** 1. ** Material Collection ** - You can go to Petal Network to search for suitable background images and prioritize the images marked "Follow and discuss". 2. ** Software Selection ** - [Can be edited: The operation is relatively simple, easy to use, suitable for beginners.] - You can also use PowerPoint (suitable for users with a certain foundation). You need to download and install the software first. ** 2. Make the cover with a clip (Take the clip as an example)** 1. ** Set background image ** - He imported the selected base map into the editing screen, found the adjustment button in the bottom of the tool bar, and set the ratio to 3:4 (closer to the ratio of the cover of the novel). Then, he adjusted the size of the image to the same size as the canvas (you can push and pull the image with two fingers). 2. ** Enter text ** - He clicked on the text button, then clicked on the new text, and entered the title of the doujinshi novel. If you want the text to have different sizes and styles, you need to enter the phrases separately. - First, choose a text layer, click the edit button, and then click the style button to set different colors and strokes. For important main characters (such as the key part of the book title), he could choose a suitable font. He could also adjust the spacing and size of the words by clicking on the arrangement. Finally, he could click on the flower word to choose a beautiful style. 3. ** Add decoration (option)** - If you feel that there is too much space below the text, you can add an icon or other decorations. He found the picture-in-picture in the tool bar, added it, and imported the picture that had been stored in the phone. To remove the white background of the picture, click the Chroma Matting button on the tool bar, click the Color picker, and move the ring to the white area to operate. ** 3. Create a cover using Photoshop1 (Take Photoshop1 as an example)** 1. ** New document ** - He clicked on the document "New" in the upper left corner, set the width to 600 px, and the height to 800 px (different websites might have different size requirements). Then, he clicked OK, and a white background appeared. 2. ** Placing Material ** - All kinds of cover material could be downloaded from Petal Net. He clicked on the file "insert" button to insert the downloaded lace and other materials. 3. ** Enter text ** - On the left side, click on the "T" button, enter the text one by one, and then type it out (you can download the font from the font manager). 4. ** Add decoration and information ** - Add some cute decorations, such as clicking the rectangular tool on the left side of the tool bar to create a border, then add some decorations, fill in the author's information, or add custom decorations such as "////////""..." Wait. 5. ** Save ** - He could save the cover page by clicking "Save as". <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
A detailed tutorial on making wontons
The following is a detailed tutorial on a type of wonton bun: ** 1. Prepare the stuffing ** 1. Choose a suitable piece of meat (such as pork foreleg meat), wash it, cut it into small pieces, and chop it up. 2. He added a suitable amount of seasoning, such as a spoonful of soy sauce, white sugar, oyster sauce, and half a spoonful of chicken essence, and stirred it evenly. 3. He had prepared the water of scallion, ginger, and pepper in advance (soak the scallion, ginger, and pepper in hot water and let it cool), then add it into the minced meat in portions. After each addition, he stirred it well until the minced meat had completely absorbed the water, and then added it again until the minced meat reached a delicate and elastic state. 4. After adding an appropriate amount of salt and pepper to remove the fishy smell, mix well, add a little sesame oil, and stir well again. The filling was ready. ** 2. Making wonton skin (if you make wonton skin yourself)** 1. Prepare half a catty of high-strength flour, add an egg (about 45 grams) and stir it up. Then add about 80 grams of room temperature water into the flour in small amounts and stir while adding water. 2. He mixed half a gram of edible soda with water, added it to the flour, and kneaded it well to get a dry dough. He covered it with plastic wrap and let it relax for 5 minutes before kneading it until the dough was smooth. 3. He sprinkled an appropriate amount of cornstarch on the chopping board, pressed the dough into a rectangular shape with a rolling pin, rolled it up and rolled it while pushing it. After rolling it out, he continued to roll it at a different angle. 4. He rolled up the leather with a rolling pin, folded it, pressed it slightly, rolled out the thick part again, rolled it up again, and pulled out the rolling pin to make the leather into a barrel shape. 5. He used a rolling pin to press the front and back of the leather, spread it open, and rolled out the thick edges again. 6. After sprinkling a little cornstarch on the surface of the skin to prevent it from sticking, he folded it and cut it into the size of the wonton skin. Then, he spread it out and cut it into pieces. The wonton skin was ready. ** 3. Wonton Buns ** 1. Take a wonton skin and place the appropriate amount of stuffing on the skin (the amount of stuffing depends on the size of the wonton skin and personal preference). 2. If he used a simpler wrapping method, he could dip the wonton skin in a corner with a little water, put the stuffing on the opposite corner, and roll the chopsticks directly without pulling them out. Then, he would press his thumb and pinky against both ends, pull the chopsticks away, and knead them. 3. You could also put the stuffing in the middle, dip the two corners with a little water, fold it in half, and press a little water with chopsticks in the middle, or put the stuffing in the middle, fold it flat, and squeeze out the air inside. ** 4. Cooking wontons and soup (option)** 1. He added water to boil the pot and placed the wrapped wontons into the pot. After the water boiled, he added water twice. The wontons floated and the skin became transparent, indicating that they were cooked. 2. When mixing the soup, add a little chopped green onion, pork fat, light soy sauce, chicken essence, salt, secret ingredients (if there is), and a little seaweed into the bowl. Then scoop in an appropriate amount of wonton soup, and then put the cooked wonton into the bowl.
Colorful lights making tutorial
The following is a lantern making tutorial: 1. ** Design Drawing **: Confirm the theme of the lights and design the pattern. Previously, it was hand-drawn, but now it can be drawn on a computer. According to the design drawing, for example, if the height of the lantern is 5 meters, draw the corresponding size on the ground according to this ratio. 2. ** Material preparation and processing ** - ** Metal material preparation (if metal materials are used to make the skeleton)**: Prepare metal materials such as steel bars and thin iron wires. Most of these materials are bent. You need to use a drawing machine to straighten the iron wires to accurately measure the length. One end of the coiled iron wire was fixed to the steel cable of the wire drawing machine, and the other end was tied to a fixed iron pile. The electric motor was turned on, and the iron wire was straightened along with the rotation of the motor's rotating disc. The straightened iron wire can be cut into suitable lengths according to the design size. - ** Skeleton making **: Place the iron wire between two rows of fixed nails, turn the iron plate on the right side, and bend the iron wire into various shapes of iron wire components. After the required components are completed, they will be Welded together to form the lantern skeleton. If metal was used as the skeleton material, its advantage was that the structure was firm and not easily deformed, but the processing required mechanical assistance. - ** Other material preparation (such as using satin to paste the surface of the skeleton)**: measure the size of the skeleton, record the length and width of the required satin of various colors, and iron the satin before cutting it to make the surface of the lantern smooth and flat. 3. ** Spray painting and sample (part of the process included)**: Spray painting, and then take samples according to the lines painted in the front palace. 4. ** Welding **: Welded the sample. 5. ** Lamp installation **: install the lamp after welding. 6. ** Testing and color registration **: After the installation of the lights, you need to carry out the testing, and then the American company will carry out the color registration. 7. ** Watch protection work (usually carried out by the female worker)**: After the color registration, the female worker will carry out the watch protection work. In the process, several processes need to be discussed and pondered over again and again. 8. ** Painting **: After the lighting test is done and there are no problems, the artist will paint it. 9. ** Paste fabric (such as using satin to paste the surface of the skeleton)**: After cutting the fabric, paste the fabric on the skeleton with a very viscous glue. Use the method of applying the glue while sticking the fabric. The order of sticking is from the inside to the outside of the skeleton. When sticking, the fabric must be smoothed out. If you want to use Red Envelopes to make lanterns (Simple Method): Method 1: 1. Prepare the unwanted red packet, cut off the top seal, and then use a utility knife to open the three edges. Divide a complete red packet into two pieces, take the back of the red packet and cut off the side about one centimeter wide. 2. He took out the letter side of the red packet and drew a one-centimeter-wide line on the left and right sides with a pen and a ruler. The inner part was divided into 0.5 millimeters. Then, he used a hand-made knife to cut it according to the fine lines. 3. Prepare an appropriate amount of double-sided tape and stick it on the left and right sides of the red packet. Stick the bottom of the letter to the bottom of the red packet, so that the two sides of the red packet are combined into one. 4. He cut off a part of the left side of the red packet, stuck double-sided tape on the bottom, and glued it to complete the production of the bottom of the red lantern. 5. He prepared a scrap edge that he had cut out earlier, folded it, and glued it to the top of the red lantern. A red lantern was completed. Method 2: 1. Prepare 7 red packets, first fold them horizontally and then vertically. Divide them into 4, fold the 4 corners of the red packets with the middle line as the fixed point, and use this operation to prepare 6 red packets. 2. He stuck double-sided tape on the back of the folded corner of the red packet and stuck all the corners together to form the base of the lantern. 3. Prepare a single-sided red packet skin, leave one centimeter at the edge without trimming, and divide the inside into 0.3 mm long strips (be careful not to cut them). Stick double-sided tape to the top of the red packet skin and prepare a red string. Roll it from left to right into a tassel shape. 4. He punched a small hole at the bottom of the lantern and hung the tassel at the bottom of the lantern to complete the production. There was also another kind of lantern production process as follows: 1. First, he decided on the theme of the lanterns, then designed the patterns of the lanterns according to the design drawings. 2. According to the requirements of the pattern, the materials (such as angle steel, square steel, channel steel, various types of elemental silk, round strips, etc.) were cut and shaped, and the shaped sample and the wire strips were welding, and then combined and welding. 3. The light sources were laid out and connected. 4. According to the pattern requirements and the color strips tied to each part, they were separated and pasted, and drawn with golden thread. 5. The small parts were assembled according to the large pattern. 6. The double safety control switch was installed, and the switch was switched on for testing. In addition, when students made special colored lights, they used pliers to fold the small and medium-sized iron wire into the desired shape, tie and fix the corners and edges, then cut, paste, and paste the red coat (use thin red cloth or red waste paper, draw according to size, and glue or sew the paper-cut patterns on it) and other steps.
How to write the soap-making tutorial in the novel
Here are a few examples of soap-making lessons in novels: * * 1. Simple modern version of soap making tutorial (can be used in modern settings or ancient novels with modern knowledge brought by transmigrators)** 1. raw materials preparation - Alkali: Accurately weigh about 50 grams of alkali and prepare 180 cc of distilled water. Alkali was the key chemical reaction substance in this process. Distilled water must be pure and free of impurities, because impurities may affect the quality of the soap. - Oil: Take 500cc of oil. The oil can be common vegetable oil or animal oil, such as olive oil or lard. After the oil was filled in a container, it was soaked in hot water and heated to about 40 degrees. This temperature would allow the oil and the base water to react better. 2. Alkaline water blending - He poured the weighed base into the distilled water and stirred it quickly with chopsticks to dissolve the base in the water. Be careful of splashing the soda solution during the stirring process because the soda solution is corrosive. After that, the temperature of the soda water was reduced to about 40 degrees. This temperature needed to be accurately controlled and could usually be measured with a thermometer. 3. mixed reaction - When the base water and oil reached about 40 degrees, he slowly poured the base water into the oil. This process had to be carried out slowly, stirring while pouring to ensure that the base water and oil were fully mixed so that the chemical reaction would proceed evenly. 4. Forming and drying - After mixing, he poured the solution into a mold that he had prepared beforehand. The shape of the mold could be chosen according to preference, such as square, round, etc. After pouring it in, let it stand for 24 hours. At this time, the shape of the soap was basically fixed. Then, let it continue to stand until it was completely dry. After drying, the soap could be used. * * 2. Ancient version soap (soap) making tutorial (suitable for ancient novels)** 1. Alkaline Solution - If it was in ancient times, obtaining alkalium would be more complicated. It could be obtained from plant ashes. After burning the ashes of wood and weeds, add a little more water to drown the ashes, and then stir it evenly. After removing the impurities and gray matter, it was usually filtered with a cloth. This way, the filtered mixed liquid, which was also the soda solution, could be obtained. He could also take the flesh of river clams or river snails for later use, burn the shell with charcoal fire until it was crisp, take out the black substance on the surface, and grind it into powder. He found a large pot, cut the straw into small pieces, added water to boil it, and then boiled it for half an hour on a low fire to extract the remaining soda liquor. Then, he poured the soda solution into the prepared fine powder of clams and other grinded materials, stirred it fully to dissolve it, and settled it for an hour. Then, he used a cloth bag to filter the settled solution to obtain the soda solution. - Another way to get the soda solution was to use limestone and soda, if available. After burning limestone with fire, quicklime was obtained. The quicklime reacted with water to form a lime solution, which was lime water. When the soda ash was added to the lime water solution, a chemical reaction would occur. The formed calcium carbonat would sink to the bottom, and the remaining solution would be the soda solution (the solution of Na-hydrogen-carbonat). 2. Oil preparation - It was difficult to obtain oil in ancient times. For ordinary people who had difficulties, animal oil such as lard was relatively easy to obtain. If he wanted to make soap, he needed to obtain animal oil, such as boiling it from animal fat. 3. Soap Making - He poured the previously prepared soda solution into the grease. This process required stirring while pouring, and he had to keep stirring until it was white and sticky. If you want to make scented soap, you can add petals such as osmanthus flowers to enhance the fragrance during the stirring process. - Finally, he poured the stirred viscous substance into the prepared mold and waited quietly for it to solidify overnight. Then, the soap was ready. * * 3. Soap making tutorial with special steps (can be used to make the novel more interesting or professional)** 1. raw materials preparation - Prepare the base, oil, and alcohol according to the previous instructions. The alcohol here played a special role in the production process. It could be dissolved in both oil and water, becoming a "lubricant" between oil and water solution, helping them to mix well. 2. mixing process - The oil, soda water, and alcohol were added into the reaction vessel. During the reaction process, it was necessary to constantly stir. This stirring work needed to be carried out continuously until the originally incompatible oil slowly absorbed heat under the effect of the furnace temperature, causing a qualitative change. Finally, the stubborn oil layer disappeared and the entire solution became transparent. 3. reaction judgment - To determine whether the reaction was over, a small amount of liquid could be dripped into clear water. If an oil film appeared on it, it needed to be heated. When there was no more oil film, it meant that the reaction was sufficient. 4. Salting out and Forming - When the reaction was sufficient, a translucent solution system could be seen. Then, he added fine salt particles or saturated salt water. At this time, the whole solution would churn up and down. The pale yellow deposit (soap) would no longer be hidden. After sufficient stirring, they would occupy the upper space of the solution. This step was called salting out. - Then, he would filter out the deposit from the solution, add spices, put it into a mold, and press it into shape. He could even put his favorite logo on it. This way, the unique soap would be completed. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>