Rebirth 1978, the novel that began to divide the bamboo fence
" Rebirth 1978 Begins to Split Up, Bamboo Cliff Tea " was an urban novel written by the author, Bamboo Cliff Tea. The story was about Lin Liqing's rebirth in 1982. She learned the lessons of her previous life and managed her own small family from scratch, achieving success. This novel was a serial work provided by a member of the club.
Rebirth 1978, the novel that began to divide the bamboo fence
" Rebirth 1978, Began to Split up the Family, Zhuli Qingcha " was an urban novel written by the author, Zhuli Qingcha. The story was about Lin Liqing's rebirth in 1982. She learned the lessons of her previous life and started running her own small family from scratch, and she achieved success. This novel was a serial work provided by a member of the club. The specific chapter list and the latest chapters can be read on the relevant websites.
Rebirth 1978, the novel that began to divide the bamboo fence
" Rebirth 1978 Begins to Split Up, Bamboo Cliff Tea " was an urban novel written by the author, Bamboo Cliff Tea. The story was about Lin Liqing's rebirth in 1982. She learned the lessons of her previous life and managed her own small family from scratch, achieving success. This novel was a serial work provided by a member of the club.
Bamboo Fence Making
The process of making a bamboo fence included the following steps: First, choose a bamboo of moderate diameter and saw it into bamboo strips of equal length. Then, he used a mortise and tenon tool to mortise and tenon the bamboo pieces to increase the firmness of the fence. Next, he placed the tenon bamboo fence at the location where the fence was needed, used a drill to drill holes in the ground, and fixed the bamboo fence to the ground with rope or wire to prevent it from tilting or moving. Finally, it could be decorated according to personal preferences, such as applying waterproof paint and anti-rust paint. The bamboo fence made in this way had better durability and ornamental effect.
The Weaving of Bamboo Fence
There were many ways to weave a bamboo fence. The steps to weave a bamboo fence were as follows: First, split the bamboo into bamboo boards that were one meter long and three centimeters wide, and leave a part of the slender bamboo strips for weaving. Then, he used a saw to cut the bamboo into the required height of the fence and used a knife to cut each section. He started weaving from the middle. He took a bamboo strip, folded it in half from the middle, and attached it to the first bamboo. Then, he continued to weave it one by one. After weaving to the 15th and 16th strands, he could fold it back and repeat the weaving for the second time. He could weave it back and forth four to five times, and the section in the middle that was fixed would be finished. Then, he began to weave the next section using the same method. Finally, he used the same method to weave the third, fourth, and fifth sections. A simple bamboo fence was completed. In addition, bamboo fences of different styles could be made according to different weaving methods, such as "plain heart","sieve","hat" and "fish scale".
Bamboo fence manufacturing method
The method of making a bamboo fence was as follows: First, find a few fresh bamboos, cut them down, and remove the scabs and tips. Then, he used a saw to cut the bamboo into the required height of the fence, and each section was cut open with a knife. Next, he made bamboo strips, cut the bamboo into a width of about 10 mm, and removed the yellow bamboo strips. He laid the bamboo pieces that he had just cut open on the ground and used the bamboo strips that he had made to connect the bamboo pieces according to the interweaving method. After the production was completed, he could choose to plant some flowers or trees to increase the aesthetics of the courtyard.
How to build a fence with bamboo
The method of using bamboo to build a fence was as follows: First, choose fresh bamboo. The diameter was generally between 5-10 cm, and the length could be chosen according to the needs. One had to choose a bamboo that did not have a wormhole and cut a gap diagonally at one end for cross-fixing. Then, he placed the two bamboos in a crisscross position and tied them tightly together with a rope. Make sure that the intersection point is bound firmly. At the other end of the intersection, nail the bamboo to the ground or wall to ensure that the bamboo is firmly fixed to prevent the fence from shifting or becoming unstable during use.
What nails are used for the bamboo fence?
The bamboo fence could be made with steel nails, linen, or bamboo strips to fix the vertical poles. In addition, it could also be fixed with screws. For the specific production method, you can refer to the steps mentioned in documents [1] and [5].
Method for manufacturing foldable bamboo fence
The manufacturing method of the foldable bamboo fence could be fixed with steel nails, linen, or bamboo strips. The specific steps were as follows: First, use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, according to the required length, the bamboo board was fixed to the wooden or bamboo pole with a fine hemp rope or plastic rope. Finally, he used a hammer and nails to fix the fence to the ground, completing the production of the foldable bamboo fence.
Method for manufacturing foldable bamboo fence
The manufacturing method of the foldable bamboo fence. First, he needed to prepare bamboo and use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, he used a saw to cut the bamboo board into the required height of the fence, and each section was cut open with a knife. Next, he began to weave a bamboo fence with linen rope from the middle, folded it in half from the middle and fixed it on the first bamboo board, then woven it one by one. When 15-16 bamboo fences were woven, they could be folded back and repeated for a second time, 4-6 times back and forth to make the bamboo fence stronger. Finally, repeat the steps above to make more sections of the bamboo fence as needed. In this way, a simple bamboo fence could be made.
What is used to fix the bamboo fence?
Bamboo fences could be fixed in many ways. The following fixing methods could be used: fixing with nails, fixing with steel wires, fixing with wooden stakes, fixing with steel nails, linen or bamboo strips, and fixing with screws. For the specific fixing method, you can refer to the steps mentioned in documents [1],[2], and [5].